AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

208-5552 CLUTCH & GEAR GP-WINCH S/N CSK1-UP PART OF 179-9513 WINCH AR AN ATTACHMENT D5G TRACK-TYPE TRACTOR


WORK TOOLS
WINCH GP
HYDRAULIC SYSTEM
CONTROL GP-WINCH HYDRAULIC
WORK TOOLS
WINCH GP
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP
HYDRAULIC SYSTEM
FILTER GP
WORK TOOLS
WINCH GP

TRACK-TYPE TRACTOR D5G TRACK-TYPE TRACTOR FDH
 D5G XL & LGP TRACK TYPE TRACTORS FDH00001-UP (MACHINE) POWERED BY 3046 Engine SEBP3363 D5G FDH   (2001)

WORK TOOLS

WINCH GP
BRAKE GP-WINCH
211-8168 BRAKE GP-WINCH
CASE GP-WINCH
208-5546 CASE GP-WINCH
CLUTCH & GEAR GP-WINCH
208-5552 CLUTCH & GEAR GP-WINCH
CONTROL GP-WINCH
180-6193 CONTROL GP-WINCH
CONVERSION GP-WINCH
187-1713 CONVERSION GP-WINCH
FAIRLEAD GP-WINCH
187-1710 FAIRLEAD GP-WINCH
 

#SEBP33630420
 

208-5552: CLUTCH & GEAR GP-WINCH

208-5552 CLUTCH & GEAR GP-WINCH
S/N CSK1-UP
PART OF 179-9513 WINCH AR
AN ATTACHMENT
i01606846 SEBP3363
2085552 CLUTCH & GEAR GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6U-1989 [1] VALVE-RELIEF  
2. [1] CLUTCH-FREESPOOL (34 TEETH)  
3. 162-0175 [1] SPRING  
4. 162-0180 [1] RING  
5. 162-2766 [1] RING-BACKUP  
6. 172-0307 [1] PISTON AS  
7. 203-6640 [1] GASKET  
8. 211-1856 [1] COVER-GEAR  
9. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
10. 3H-3385 [1] SEAL-O-RING  
11. 3J-7354 [1] SEAL-O-RING  
12. 8M-4986 [1] SEAL-O-RING  
13. 8T-4896 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 9B-7237 [14] BOLT (3/8-16X1.25-IN)  
15. 9S-8002 [1] PLUG (7/16-20-THD)  
 

#SEBP33630421
 

180-6193: CONTROL GP-WINCH

180-6193 CONTROL GP-WINCH
S/N FDH1-UP; FDW1-UP
PART OF 174-5993 INSTALLATION AR-WINCH
AN ATTACHMENT
i01597371 SEBP3363
1806193 CONTROL GP-WINCH Parts scheme 1806193 CONTROL GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-9525 [4] BAND-MARKER (ORANGE, R1)  
2. 4I-9531 [4] BAND-MARKER (RED)  
3. 4I-9532 [4] BAND-MARKER (YELLOW)  
4. 4I-9533 [2] BAND-MARKER (BLUE)  
5. 4I-9534 [2] BAND-MARKER (BROWN)  
6. 4I-9535 [2] BAND-MARKER (ORANGE)  
7. 4I-9536 [2] BAND-MARKER (WHITE)  
8. 7K-1181 [2] STRAP-CABLE  
9. 8J-6875 [1] VALVE GP-SHUTTLE  
10. 8T-6907 [1] VALVE-BALL  
11. 180-6195 I [1] HOSE AS  
12. 180-6196 I [1] HOSE AS  
13. 180-6198 I [1] HOSE AS  
14. 180-6199 I [1] HOSE AS  
15. 180-7339 Y [1] VALVE GP-PILOT  
16. 183-6106 I [1] HOSE AS  
17. 183-6107 I [1] HOSE AS  
18. 183-6109 I [1] HOSE AS  
19. 183-6627 [1] ROD  
20. 187-6339 [1] FILM (WINCH CONTROL)  
21. 213-7164 I [1] HOSE AS  
22. 2R-1939 [3] CLIP  
23. 3J-1907 [13] SEAL-O-RING  
24. 4J-5477 [9] SEAL-O-RING  
25. 6V-8397 [16] SEAL-O-RING  
26. 6V-8555 [1] NUT-FACE SEAL (1-14-THD)  
27. 6V-8641 [8] CONNECTOR  
28. 6V-8774 [3] TEE  
29. 6V-8934 [1] ADAPTER  
30. 6V-8938 [1] REDUCER  
31. 6V-9001 [1] ELBOW  
32. 6V-9168 [2] NUT (11/16-16-THD)  
33. 6V-9508 [4] PLUG (11/16-16-THD)  
34. 7X-0820 [1] TEE  
35. 7X-2534 M [2] BOLT (M6X1X50-MM)  
36. 8T-2920 [1] GROMMET (27-MM ID)  
37. 8T-3984 [1] KNOB  
38. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 8T-9358 [1] CONNECTOR  
43. 9M-8406 [1] CLIP (LOOP)  
44. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
45. 180-6197 I [1] HOSE AS  
46. 180-6200 I [1] HOSE AS  
47. 183-6108 I [1] HOSE AS  
48. 200-7798 I [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33630422
 

187-1713: CONVERSION GP-WINCH

187-1713 CONVERSION GP-WINCH -FAIRLEAD ROLLER
S/N FDH1-UP; FDW1-UP
FOURTH ROLLER
FOR USE WITH @@@@@187-1710@@@@@
AN ATTACHMENT
i01612928 SEBP3363
1871713 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-9542 [1] SHAFT-ROLLER  
2. 214-9543 Y [1] ROLLER GP-FAIRLEAD (TOP)  
3. 215-1866 [1] KEEPER  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
5. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
6. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33630423
 

179-2897: EDGE GP-BIT & CUTTING

179-2897 EDGE GP-BIT & CUTTING
S/N FDH1-UP; FDW1-UP
PART OF 184-5415, 223-4579 BLADE GP-ANGLING
AN ATTACHMENT
i01596115 SEBP3363
1792897 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5839 [1] BIT-END (RH)  
2. 6Y-5840 [1] BIT-END (LH)  
3. 3F-5108 [20] BOLT-PLOW (5/8-11X2.25-IN)  
4. 157-7338 [2] EDGE-CUTTING  
5. 4K-0367 [20] NUT-FULL (5/8-11-THD)  
6. 5P-8247 [20] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP33630424
 

6Y-5836: EDGE GP-BIT & CUTTING

6Y-5836 EDGE GP-BIT & CUTTING
S/N FDH1-UP; FDW1-UP
PART OF 183-7383, 223-4578 BLADE GP-ANGLING
AN ATTACHMENT
i01597356 SEBP3363
6Y5836 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5839 [1] BIT-END (RH)  
2. 6Y-5842 [2] EDGE-CUTTING  
3. 3F-5108 [22] BOLT-PLOW (5/8-11X2.25-IN)  
4. 5P-8247 [22] WASHER-HARD (17X32X3.5-MM THK)  
5. 4K-0367 [22] NUT-FULL (5/8-11-THD)  
6. 6Y-5840 [1] BIT-END (LH)  
 

#SEBP33630425
 

6Y-5837: EDGE GP-BIT & CUTTING

6Y-5837 EDGE GP-BIT & CUTTING
S/N FDH1-UP; FDW1-UP
PART OF 183-9066, 223-4571 BLADE GP-ANGLING
AN ATTACHMENT
i01596527 SEBP3363
6Y5837 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5839 [1] BIT-END (RH)  
2. 4T-6230 [2] EDGE-CUTTING  
3. 3F-5108 [18] BOLT-PLOW (5/8-11X2.25-IN)  
4. 5P-8247 [18] WASHER-HARD (17X32X3.5-MM THK)  
5. 4K-0367 [18] NUT-FULL (5/8-11-THD)  
6. 6Y-5840 [1] BIT-END (LH)  
 

#SEBP33630426
 

8E-7088: EDGE GP-BIT & CUTTING

8E-7088 EDGE GP-BIT & CUTTING
S/N FDH1-UP; FDW1-UP
PART OF 183-4248, 223-4577 BLADE GP-ANGLING, 222-4001 BLADE GP-STRAIGHT
FOR USE WITH POWRER ANGLE & TILT
AN ATTACHMENT
i01596569 SEBP3363
8E7088 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-7079 [1] BIT-END (RH)  
2. 3G-9306 [2] EDGE-CUTTING  
3. 5J-4771 [20] BOLT-PLOW (3/4-10X2.75-IN)  
4. 5P-8248 [20] WASHER-HARD (20X36.5X3.5-MM THK)  
5. 2J-3506 [20] NUT-FULL (3/4-10-THD)  
6. 8E-7078 [1] BIT-END (LH)  
 

#SEBP33630427
 

187-1710: FAIRLEAD GP-WINCH

187-1710 FAIRLEAD GP-WINCH
S/N FDH1-UP; FDW1-UP
THREE ROLLER
FOR USE WITH @@@@@179-9513@@@@@
AN ATTACHMENT
i01612947 SEBP3363
1871710 FAIRLEAD GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-9722 B [6] RING-THRUST  
2. 6L-9726 B [6] RING-THRUST  
3. 6Y-2933 B [6] RING-THRUST  
4. 214-9541 [1] FRAME AS-FAIRLEAD  
5. 214-9542 [1] SHAFT-ROLLER  
6. 214-9543 Y [1] ROLLER GP-FAIRLEAD (TOP)  
7. 214-9544 [2] SHAFT  
8. 214-9545 Y [2] ROLLER GP-FAIRLEAD  
9. 215-1789 [2] BUSHING  
10. 215-1850 [1] ROD-THREADED  
11. 215-1866 [1] KEEPER  
12. 215-1867 [2] KEEPER  
13. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
14. 5S-7379 [6] BOLT (3/8-16X0.875-IN)  
15. 6V-8190 [2] NUT (1-8-THD)  
16. 7X-0406 [2] BOLT (1-8X3-IN)  
17. 7X-0452 [2] NUT-FULL (1-1/2-6-THD)  
18. 7X-0537 [2] WASHER-HARD (40.5X67X6-MM THK)  
19. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP33630428
 

201-2744: FILTER GP-OIL

201-2744 FILTER GP-OIL -HYDRAULIC
S/N FDH1-UP; FDW1-UP
PART OF 180-6194 LINES GP-WINCH
AN ATTACHMENT
i01693903 SEBP3363
2012744 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
3. 134-0404 [1] SWITCH AS-PRESSURE (HYDRAULIC OIL FILTER)  
4. 144-6691 [1] FILTER-OIL (ADVANCED EFFICIENCY)  
5. 3J-1907 [2] SEAL-O-RING  
 

#SEBP33630429
 

208-5551: GEAR GP-WINCH

208-5551 GEAR GP-WINCH
S/N CSK1-UP
PART OF 179-9513 WINCH AR
AN ATTACHMENT
i01590082 SEBP3363
2085551 GEAR GP-WINCH Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-6174 [3] BEARING  
2. 119-1616 [1] RING  
3. 119-2195 [1] RING  
4. 123-4410 [2] SPACER (2X2.75X0.125-IN THK)  
5. 129-7301 [1] SEAL-O-RING  
6. 161-6424 [1] GEAR  
7. [1] GEAR  
8. [1] GEAR  
9. 161-8041 [1] WASHER (100.5X125X3.5-MM THK)  
10. 162-0178 [2] BALL BEARING  
11. 162-0179 [1] RING  
12. 162-2772 [1] RING  
13. 172-2437 [1] BEARING AS-NEEDLE  
14. 203-6639 [1] SHAFT-GEAR  
15. 1M-7914 [1] RING-RETAINING  
16. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
17. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog D5G :

CASE GP-WINCH
208-5546 CASE GP-WINCH
BRAKE GP-WINCH
211-8168 BRAKE GP-WINCH
BRAKE & PLANETARY GP-WINCH
211-8166 BRAKE & PLANETARY GP-WINCH
BRAKE & PLANETARY GP-WINCH
208-5548 BRAKE & PLANETARY GP-WINCH
BLADE GP-STRAIGHT
222-4001 BLADE GP-STRAIGHT
BLADE GP-ANGLING
223-4579 BLADE GP-ANGLING
BLADE GP-ANGLING
223-4578 BLADE GP-ANGLING
BLADE GP-ANGLING
223-4577 BLADE GP-ANGLING
CONTROL GP-WINCH
180-6193 CONTROL GP-WINCH
CONVERSION GP-WINCH
187-1713 CONVERSION GP-WINCH
EDGE GP-BIT & CUTTING
179-2897 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
6Y-5836 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
6Y-5837 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
8E-7088 EDGE GP-BIT & CUTTING
FAIRLEAD GP-WINCH
187-1710 FAIRLEAD GP-WINCH
FILTER GP-OIL
201-2744 FILTER GP-OIL

Truck sale:

Caterpillar D5G, Construction
62,500 USD 
Caterpillar D5G, Construction
- Dozers
MILTON CAT
Caterpillar D5G, Construction
48,000 
Caterpillar D5G, Construction
- Dozers
MACALLISTER MACHINERY CO., INC
CATERPILLAR D5G 2007
 
CATERPILLAR D5G 2007
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR D5G 2004
 
CATERPILLAR D5G 2004
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR D5G 2002
 
CATERPILLAR D5G 2002
- TRACK TYPE TRACTORS
WHAYNE SUPPLY CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.