BASIC ENGINE
CYLINDER HEAD GPDAMPER GP
DRIVE GP-FAN
CYLINDER HEAD GP
PARTS GP-MISCELLANEOUS
BASIC ENGINE
CYLINDER HEAD GP
#SEBP33650040
161-3405: CYLINDER HEAD GP
For full view, you need register
Parts for your 330C L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-2181 Y | [1] | CYLINDER HEAD GP | |
| 2. | 167-0171 Y | [26] | FASTENER GP-CYLINDER HEAD | |
| 3. | 187-1315 | [1] | GASKET AS | |
| 4. | 8C-4984 M | [5] | BOLT (M8X1.25X150-MM) | |
| 5. | 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33650041
201-2181: CYLINDER HEAD GP
201-2181 CYLINDER HEAD GP
S/N 4ZF1-372
PART OF 161-3405 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@210-5984@@@@@
S/N 4ZF1-372
PART OF 161-3405 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@210-5984@@@@@
For full view, you need register
Parts for your 330C L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-4429 | [48] | LOCK-RETAINER | |
| 2. | 211-2134 | [24] | RETAINER | |
| 3. | 260-4856 | [24] | GUIDE-VALVE | |
| 4. | 163-2478 | [24] | SEAL-VALVE STEM | |
| 5. | 190-6115 | [24] | SPRING-VALVE (INNER) | |
| 6. | 190-6117 | [24] | SPRING-VALVE (OUTER) | |
| 7. | 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | |
| 8. | 183-3407 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8004 | [1] | PLUG (9/16-18-THD)(MARKED Y) | ||
| 8A. | 153-4906 | [1] | SEAL-O-RING (MARKED Y) | |
| 9. | 183-3409 | [6] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 9A. | 033-5853 | [1] | SEAL-O-RING | |
| 10. | 183-3902 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8010 | [1] | PLUG | ||
| 10A. | 183-2317 | [1] | SEAL-O-RING | |
| 11. | 217-0609 | [12] | SEAT-VALVE SPRING | |
| 12. | 163-2442 | [12] | VALVE-INLET | |
| 13. | 188-3122 | [12] | VALVE-EXHAUST | |
| 14. | 201-2180 Y | [1] | CYLINDER HEAD AS | |
| 15. | 148-8395 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 15A. | 3K-0360 | [1] | SEAL-O-RING | |
| 4K-9890 BF | [6] | WASHER (8.6X17.3X1.6-MM THK) | ||
| 6V-5219 BFM | [6] | BOLT (M8X1.25X40-MM) | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33650042
210-5984: CYLINDER HEAD GP
For full view, you need register
Parts for your 330C L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-4429 | [48] | LOCK-RETAINER | |
| 2. | 211-2134 | [24] | RETAINER | |
| 3. | 163-2442 | [12] | VALVE-INLET | |
| 4. | 260-4856 | [24] | GUIDE-VALVE (STANDARD, EXHAUST) | |
| 203-3237 | GUIDE-VALVE (0.13-MM OS, EXHAUST) | |||
| 203-3238 | GUIDE-VALVE (0.5-MM OS, EXHAUST) | |||
| 5. | 163-2478 | [24] | SEAL-VALVE STEM | |
| 6. | 321-8638 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6A. | 214-7568 | [1] | SEAL-O-RING | |
| 7. | 319-6237 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 7A. | 228-7096 | [1] | SEAL-O-RING | |
| 271-7442 | [1] | PLUG | ||
| 8. | 183-7889 | [12] | SEAT-VALVE SPRING | |
| 9. | 188-3122 | [12] | VALVE-EXHAUST | |
| 10. | 190-6115 | [24] | SPRING-VALVE (INNER) | |
| 11. | 190-6117 | [24] | SPRING-VALVE (OUTER) | |
| 12. | Y | [1] | CYLINDER HEAD AS | |
| 13. | 148-8395 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 13A. | 3K-0360 | [1] | SEAL-O-RING | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 14. | 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33650043
210-5987: CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
S/N 4ZF373-UP; 7AZ1-UP
PART OF 187-0471, 233-6935, 388-5610, 388-5615 ENGINE AR-CORE
S/N 4ZF373-UP; 7AZ1-UP
PART OF 187-0471, 233-6935, 388-5610, 388-5615 ENGINE AR-CORE
For full view, you need register
Parts for your 330C L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 167-0171 Y | [26] | FASTENER GP-CYLINDER HEAD | |
| 2. | 187-1315 | [1] | GASKET AS | |
| 3. | 210-5984 Y | [1] | CYLINDER HEAD GP | |
| 4. | 8C-4984 M | [5] | BOLT (M8X1.25X150-MM) | |
| 5. | 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33650044
190-0795: DAMPER & PULLEY GP
190-0795 DAMPER & PULLEY GP
S/N 4ZF1-12454; 7AZ1-UP
TO MOVE THE DAMPER OUT TO CLEAR THE FAN PULLEY IS A SPACER BETWEEN THE PULLEY AND THE DAMPER ASSEMBLY
PART OF 187-0470, 208-3027, 234-2917, 237-0283 ENGINE AR
S/N 4ZF1-12454; 7AZ1-UP
TO MOVE THE DAMPER OUT TO CLEAR THE FAN PULLEY IS A SPACER BETWEEN THE PULLEY AND THE DAMPER ASSEMBLY
PART OF 187-0470, 208-3027, 234-2917, 237-0283 ENGINE AR
For full view, you need register
Parts for your 330C L EXCAVATOR:
#SEBP33650045
4P-4451: DAMPER GP
For full view, you need register
#SEBP33650046
187-0481: DRIVE GP-FAN
187-0481 DRIVE GP-FAN
S/N 4ZF1-UP; 7AZ1-UP
FAN IS OFFSET 15MM TO THE LEFT SIDE OF THE ENGINE AND IS 270MM ABOVE THE CENTER LINE OF THE CRANK
PART OF 187-0470, 208-3027, 234-2917, 237-0283 ENGINE AR
S/N 4ZF1-UP; 7AZ1-UP
FAN IS OFFSET 15MM TO THE LEFT SIDE OF THE ENGINE AND IS 270MM ABOVE THE CENTER LINE OF THE CRANK
PART OF 187-0470, 208-3027, 234-2917, 237-0283 ENGINE AR
For full view, you need register
Parts for your 330C L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-0643 | [1] | BELT TENSIONER GP (FAN DRIVE) | |
| 2. | 188-9157 Y | [1] | DRIVE GP-FAN | |
| 3. | 189-2449 | [1] | SUPPORT | |
| 4. | 6V-5218 M | [4] | BOLT (M8X1.25X35-MM) | |
| 5. | 6V-5839 | [7] | WASHER (11X21X2.5-MM THK) | |
| 6. | 6V-5842 M | [6] | BOLT (M10X1.5X40-MM) | |
| 7. | 8T-0643 M | [1] | BOLT (M10X1.5X80-MM) | |
| 8. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33650047
188-9157: DRIVE GP-FAN
For full view, you need register
Parts for your 330C L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-1203 | [2] | CUP-BEARING | |
| 2. | 4W-1204 | [2] | CONE-BEARING | |
| 3. | 4W-2042 | [1] | SPACER (35.3X45.5X38.331-MM THK) | |
| 4. | 7C-8369 | [1] | HUB | |
| 5. | 7C-8370 | [1] | CAP-DUST | |
| 6. | 7C-8634 | [1] | PLATE | |
| 7. | 188-9158 | [1] | BRACKET AS-FAN | |
| 8. | 5S-9062 | [1] | SPACER (35.032X50.8X15.88-MM THK) | |
| 9. | 6V-8004 M | [1] | BOLT (M12X1.75X120-MM) | |
| 10. | 6V-9748 | [1] | SEAL-LIP TYPE | |
| M | METRIC PART | |||
#SEBP33650048
167-0171: FASTENER GP-CYLINDER HEAD
167-0171 FASTENER GP-CYLINDER HEAD
S/N 4ZF1-UP; 7AZ1-UP
PART OF 161-3405, 210-5987 CYLINDER HEAD GP
S/N 4ZF1-UP; 7AZ1-UP
PART OF 161-3405, 210-5987 CYLINDER HEAD GP
For full view, you need register
#SEBP33650049
169-3106: FASTENER GP-ENGINE
169-3106 FASTENER GP-ENGINE
S/N 4ZF1-372
PART OF 187-0471 ENGINE AR-CORE
CANNOT BE USED WITH COMPRESSION BRAKE
S/N 4ZF1-372
PART OF 187-0471 ENGINE AR-CORE
CANNOT BE USED WITH COMPRESSION BRAKE
For full view, you need register
Information:
BASIC ENGINE
CYLINDER HEAD GP
Special Instruction
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Specifications
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 330C L :
Truck sale:
55,000
