163-6698 WIRING GP-CONVERTER S/N JAB1-UP; KDD1-UP (12-VOLT, 7-AMPERE) AN ATTACHMENT 330C L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 163-6698 WIRING GP-
1. 204-3604 WIRING GP-
2. 204-3604 WIRING GP-
3. 204-3604 WIRING GP-
4. 204-3604 WIRING GP-
5. 204-3604 WIRING GP-
6. 204-3604 WIRING GP-
7. 204-3604 WIRING GP-
8. 193-3391 WIRING GP-
9. 204-1917 WIRING GP-
0. INFORMATION

EXCAVATOR 330C L EXCAVATOR JAB
330C & 330C L Excavators JAB00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3365 330C L JAB (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

186-4628 WIRING GP-CONSOLE

163-6629 WIRING GP-CONVERTER

163-6698 WIRING GP-CONVERTER

204-3604 WIRING GP-ELECTRONIC CONTROL

#SEBP33650300

163-6698: WIRING GP-CONVERTER

WIRING GP-CONVERTER

163-6698 WIRING GP-CONVERTER
S/N JAB1-UP; KDD1-UP
(12-VOLT, 7-AMPERE)
AN ATTACHMENT

i01263399 SEBP3365

1636698 WIRING GP-CONVERTER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	167-3467	[2]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
2.	8T-4171 M	[8]	BOLT (M6X1X12-MM)
3.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
4.	213-0644	[1]	BRACKET AS
5.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
6.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
7.	167-3473	[1]	HARNESS AS-WIRING (VOLTAGE CONVERTER)
8.	3S-2093	[2]	STRAP-CABLE
9.	121-0987	[2]	SOCKET-AUXILIARY POWER (12-VOLT, 7-AMPERE)
	M		METRIC PART

#SEBP33650301

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF1-4114
PART OF 187-0470 ENGINE AR

i01534289 SEBP3365

2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
2.	6V-4369	[1]	CLIP
3.	003-9835	[2]	PROTECTOR
4.	110-8457	[1]	BOOT
5.	112-6646 M	[1]	LOCKNUT (M6X1-THD)
6.	148-0757	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
7.	147-0286	[1]	WIRE AS
8.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	105-1797	[5]	MOUNT
	191-7823	[1]	RECEPTACLE AS
9.	201-1283	[1]	HARNESS AS-CONTROL (ENGINE ELECTRONIC, LOWER)
	214-7170 J	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)
			(INCLUDES:)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	194-5226	[7]	WIRE AS (16-GA)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
11.	4P-7428	[1]	CLIP (LADDER)
12.	4P-7429	[1]	CLIP (LADDER)
13.	4P-7581	[4]	CLIP (LADDER)
14.	4P-8134	[1]	CLIP (LADDER)
15.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
18.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
19.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
20.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
21.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
22.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
23.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
24.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	J		KIT MARKED "J" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART

#SEBP33650302

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF4115-5892
PART OF 187-0470 ENGINE AR

i01844199 SEBP3365

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
3.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	105-1797	[5]	MOUNT
	191-7823	[1]	RECEPTACLE AS
4.	201-1283	[1]	HARNESS AS-CONTROL (ENGINE ELECTRONIC, LOWER)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	194-5226	[8]	WIRE AS (16-GA)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			INCLUDES WEDGE & RECEPTACLE
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			INCLUDES WEDGE & RECEPTACLE
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
5.	223-4453 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
6.	117-7032 C	[1]	WIRE AS
7.	193-9141 C	[2]	COVER-TERMINAL
8.	3E-4353 C	[2]	WASHER-HARD (11X25X3-MM THK)
9.	4P-7428	[1]	CLIP (LADDER)
10.	4P-7429	[1]	CLIP (LADDER)
11.	4P-7581	[4]	CLIP (LADDER)
12.	4P-8134	[1]	CLIP (LADDER)
13.	6V-4369	[1]	CLIP
14.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
15.	6V-6317 CM	[2]	BOLT (M10X1.5X20-MM)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
18.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
19.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
20.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33650303

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF5893-7984
PART OF 187-0470, 234-2917 ENGINE AR

i01985700 SEBP3365

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[24]	STRAP-CABLE
3.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	105-1797	[5]	MOUNT
	191-7823	[1]	RECEPTACLE AS
4.	226-0903 C	[1]	CABLE AS
5.	230-6279 C	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	194-5226	[8]	WIRE AS (16-GA)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	8T-8737	[35]	PLUG-SEAL
	3S-2093	[3]	STRAP-CABLE
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
6.	223-4453 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
7.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
8.	4P-7581 C	[5]	CLIP (LADDER)
9.	4P-8134 C	[3]	CLIP (LADDER)
10.	5P-7970 CM	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839 C	[3]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 CM	[4]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 CM	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33650304

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7985-UP
PART OF 234-2917 ENGINE AR
Type 1

i02085692 SEBP3365

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[24]	STRAP-CABLE
3.	215-3249 C	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	191-7823	[1]	RECEPTACLE AS
			(INCLUDES PLUG AS & WEDGE)
4.	226-0903	[1]	CABLE AS
5.	230-6279	[1]	HARNESS AS-ENGINE (ENGINE ELECTRONIC-LOWER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	6I-4347	[4]	BOOT (4-PIN)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)
			(FOR EXTREME COLD CLIMATES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	194-5226	[1]	WIRE AS (16-GA)
	194-5227	[1]	WIRE AS (14-GA)
6.	223-4453 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
7.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
8.	4P-7581	[5]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	5P-7970 M	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839	[3]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 M	[4]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33650305

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7985-UP
PART OF 234-2917 ENGINE AR
Type 2

i02556354 SEBP3365

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[24]	STRAP-CABLE
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	191-7823	[1]	RECEPTACLE AS
			(INCLUDES PLUG AS & WEDGE)
4.	226-0903	[1]	CABLE AS
5.	230-6279	[1]	HARNESS AS-ENGINE (ENGINE ELECTRONIC-LOWER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	6I-4347	[4]	BOOT (4-PIN)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)
			(FOR EXTREME COLD CLIMATES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	194-5226	[1]	WIRE AS (16-GA)
	194-5227	[1]	WIRE AS (14-GA)
6.	223-4453 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
8.	4P-7581	[5]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	5P-7970 M	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839 C	[6]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 CM	[2]	BOLT (M10X1.5X20-MM)
14.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	8T-4133 CM	[2]	NUT (M10X1.5-THD)
21.	101-3129 CM	[2]	STUD (M10X1.5-THD)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33650306

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7985-UP; 7AZ1-UP
PART OF 208-3027, 234-2917, 237-0283 ENGINE AR

i02556375 SEBP3365

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
3.	215-3249 Y	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	226-0903	[1]	CABLE AS
5.	230-6279 Y	[1]	HARNESS AS-ENGINE (ECM)
6.	209-5582 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
7.	208-9277 CM	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
8.	4P-7581	[5]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	5P-7970 M	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839 C	[4]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 CM	[3]	BOLT (M10X1.5X20-MM)
14.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	283-1226 C	[1]	BRACKET AS
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33650307

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF1-UP; 7AZ1-UP
PART OF 208-3027, 234-2917, 237-0283 ENGINE AR

i05375399 SEBP3365

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
3.	546-2154 CY	[1]	HARNESS AS-CONTROL
4.	226-0903	[1]	CABLE AS
5.	230-6279 Y	[1]	HARNESS AS-ENGINE (ECM)
6.	398-0940 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
7.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
8.	4P-7581	[5]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	5P-7970 M	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 M	[3]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	283-1226	[1]	BRACKET AS
21.	439-4571 C	[5]	CLIP (LOOP)
22.	440-0881 CM	[5]	BOLT-SOCKET HEAD (M8X1.25-THD)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33650308

193-3391: WIRING GP-FINE SWING

WIRING GP-FINE SWING

193-3391 WIRING GP-FINE SWING
S/N JAB1-UP; KDD1-UP
PART OF 191-5613 VALVE AR-SWING
AN ATTACHMENT

i01621692 SEBP3365

1933391 WIRING GP-FINE SWING Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-0118	[1]	CLIP
2.	193-3392	[1]	HARNESS AS-SOLENOID
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	103-2529 E		HOSE (92-CM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	111-4837	[2]	CLIP
4.	163-6722	[1]	SWITCH AS-ROCKER (FINE SWING CONTROL)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[5]	TERMINAL (MALE)
5.	7Y-8109	[1]	BRACKET AS
6.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
8.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
9.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP33650309

204-1917: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

204-1917 WIRING GP-QUICK COUPLER
S/N JAB1-UP; KDD1-UP
PART OF 210-9920, 215-5924 CONTROL AR-COUPLER
AN ATTACHMENT

i01707427 SEBP3365

2041917 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[4]	STRAP-CABLE
2.	204-1923	[1]	HARNESS AS-SWITCH (QUICK COUPLER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
3.	204-1920	[1]	HARNESS AS-SWITCH (QUICK COUPLER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
4.	3S-2093	[8]	STRAP-CABLE
5.	7N-2353	[1]	SWITCH AS-TOGGLE (QUICK COUPLER)
6.	186-4574	[1]	PLUG AS
	9G-3695	[2]	PLUG-SEAL

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines

Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines

How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader

Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines

Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader

CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines

CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader

Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader

Engine Wiring Information
C-9 Engine for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C L :

163-6629 WIRING GP-CONVERTER

186-4628 WIRING GP-CONSOLE

186-4572 WIRING GP-CONSOLE

170-6909 WIRING GP-CONSOLE

267-7820 WIRING GP-COMMUNICATION

275-7219 WIRING GP-COLD WEATHER

204-1633 WIRING GP-CIRCULATING FAN

227-7068 WIRING GP-CHASSIS

204-3604 WIRING GP-ELECTRONIC CONTROL

193-3391 WIRING GP-FINE SWING

Truck sale:

Caterpillar 330C L
- Crawler Excavators
MADISA

55,000

Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
BLANCHARD MACHINERY CO.

48,000

Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
MILTON CAT

Caterpillar 330CL
- Crawler Excavators
MILTON CAT