AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

197-4306 WIRING GP-RADIO S/N JAB1-UP; KDD1-UP Type 1 AN ATTACHMENT 330C L EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 330C L EXCAVATOR JAB
 330C & 330C L Excavators JAB00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3365 330C L JAB   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FINE SWING
193-3391 WIRING GP-FINE SWING
WIRING GP-QUICK COUPLER
204-1917 WIRING GP-QUICK COUPLER
WIRING GP-RADIO
197-4306 WIRING GP-RADIO
WIRING GP-RADIO
197-4306 WIRING GP-RADIO
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP
 

#SEBP33650310
 

197-4306: WIRING GP-RADIO

197-4306 WIRING GP-RADIO
S/N JAB1-UP; KDD1-UP
Type 1
AN ATTACHMENT
i01434113 SEBP3365
1974306 WIRING GP-RADIO Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-3527 [1] HARNESS AS-RADIO  
  102-8806 [2] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  3S-2093 [1] STRAP-CABLE  
  5P-2321 [5] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
2. 3S-2093 [6] STRAP-CABLE  
3. 134-1346 [1] CONVERTER GP-ELECTRICAL (24-VOLT TO 12-VOLT)  
4. 8T-6411 M [2] SCREW-MACHINE (M6X1X12-MM)  
5. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
6. 101-2846 E GUARD (18-CM)  
7. 185-8284 [1] COVER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP33650311
 

197-4306: WIRING GP-RADIO

197-4306 WIRING GP-RADIO
S/N JAB1-UP; KDD1-UP
Type 2
AN ATTACHMENT
i02468977 SEBP3365
1974306 WIRING GP-RADIO Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-7221 C [1] HARNESS AS-RADIO  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [12] STRAP-CABLE  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  163-6808 [1] CONNECTOR-RECEPTACLE  
  163-6809 [7] TERMINAL (MALE)  
2. 3S-2093 [6] STRAP-CABLE  
3. 205-4285 C [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
4. 7Y-5226 CM [2] NUT (M5X0.8-THD)  
5. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
6. 101-2846 E GUARD (18-CM)  
7. 185-8284 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP33650312
 

163-6640: WIRING GP-REFUELING PUMP

163-6640 WIRING GP-REFUELING PUMP
S/N JAB1-UP; KDD1-UP
PART OF 176-2800 PUMP AR-REFUELING
Type 1
AN ATTACHMENT
i01311300 SEBP3365
1636640 WIRING GP-REFUELING PUMP Parts scheme 1636640 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
2. 3S-2093 [14] STRAP-CABLE  
3. 238-1721 [1] WIRE AS  
4. 116-0095 [1] SWITCH AS (REFUELING PUMP, START)  
  6V-2689 BD TUBE-HEAT SHRINK (6.35-MM DIA)  
  1S-0812 [2] SCREW-TAPPING  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
  116-0096 [1] HARNESS AS-WIRING (REFUELING PUMP, START)  
5. 116-0097 [1] SWITCH AS (REFUELING PUMP, STOP)  
  1S-0812 [2] SCREW-TAPPING  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
  116-0098 [1] HARNESS AS-WIRING (REFUELING PUMP, STOP)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 204-1686 [1] HARNESS AS-SWITCH (REFUELING PUMP RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
7. 9X-3495 [1] CLIP AS  
8. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
9. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
11. 7X-2619 M [4] BOLT (M6X1X10-MM)  
12. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
13. 165-4026 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
  4F-2294 [2] NUT-JAM (5/16-24-THD)  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  6V-8378 [2] NUT (10-32-THD)  
14. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP33650313
 

163-6640: WIRING GP-REFUELING PUMP

163-6640 WIRING GP-REFUELING PUMP
S/N JAB1-UP; KDD1-UP
PART OF 176-2800 PUMP AR-REFUELING
Type 2
AN ATTACHMENT
i02271115 SEBP3365
1636640 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0328 C [3] WASHER-HARD (5.5X10X1-MM THK)  
2. 3S-2093 [16] STRAP-CABLE  
3. 238-1721 [1] WIRE AS  
4. 116-0095 [1] SWITCH AS (REFUELING PUMP, START)  
  1S-0812 [2] SCREW-TAPPING  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
  6V-2689 BD TUBE-HEAT SHRINK (6.35-MM DIA)  
  116-0096 [1] HARNESS AS-WIRING (REFUELING PUMP, START)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 116-0097 [1] SWITCH AS (REFUELING PUMP, STOP)  
  6V-2689 BD TUBE-HEAT SHRINK (6.35-MM DIA)  
  116-0098 [1] HARNESS AS-WIRING (REFUELING PUMP, STOP)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 238-2074 C [1] HARNESS AS-SWITCH (REFUELING PUMP RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [5] STRAP-CABLE  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 9X-3495 [1] CLIP AS  
8. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
9. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
11. 7X-2619 CM [2] BOLT (M6X1X10-MM)  
12. 9X-8256 C [2] WASHER (6.6X12X2-MM THK)  
13. 213-0772 C [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
14. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
15. 096-2591 CM [2] SCREW-MACHINE (M5X0.8X35-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP33650314
 

193-3396: WIRING GP-WORK TOOL

193-3396 WIRING GP-WORK TOOL -SYSTEM 2, COMBINED FUNCTION
S/N JAB1-UP; KDD1-UP
PART OF 193-6371 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01621963 SEBP3365
1933396 WIRING GP-WORK TOOL Parts scheme 1933396 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 170-6955 [1] SWITCH AS-ROCKER (1 PUMP-2 PUMP FLOW)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [4] TERMINAL (MALE)  
3. 170-6956 [1] SWITCH AS-ROCKER (1 WAY-2 WAY FLOW)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
4. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
5. 193-3397 [1] HARNESS AS-SOLENOID  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
6. 111-4836 [1] CLIP  
7. 3S-2093 [22] STRAP-CABLE  
8. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP33650315
 

193-3401: WIRING GP-WORK TOOL

193-3401 WIRING GP-WORK TOOL -SYSTEM 3, 1-WAY, 2-PUMP
S/N JAB1-UP; KDD1-UP
PART OF 193-6372 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01621955 SEBP3365
1933401 WIRING GP-WORK TOOL Parts scheme 1933401 WIRING GP-WORK TOOL Parts scheme 1933401 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [27] STRAP-CABLE  
2. 116-0118 [2] CLIP  
3. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
4. 193-3402 [1] HARNESS AS-SOLENOID  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
5. 111-4836 [2] CLIP  
6. 3S-2093 [24] STRAP-CABLE  
7. 4P-7581 [1] CLIP (LADDER)  
8. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
11. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP33650316
 

199-4578: DRIVE GP-FINAL

199-4578 DRIVE GP-FINAL -WITH MOTOR
S/N JAB1-465; KDD1-361
PART OF 191-2576 POWER TRAIN AR
i01613406 SEBP3365
1994578 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4579 Y [1] DRIVE GP-FINAL  
2. 191-5606 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33650317
 

199-4579: DRIVE GP-FINAL

199-4579 DRIVE GP-FINAL -WITHOUT MOTOR
S/N JAB1-465; KDD1-361
PART OF 199-4578, 199-4640 DRIVE GP-FINAL
i01613248 SEBP3365
1994579 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 7Y-0639 [1] GEAR-SUN (21-TEETH)  
3. 7Y-0642 [1] GEAR-RING (63-TEETH)  
4. 7Y-0645 [1] CARRIER  
5. 7Y-0659 [3] GEAR-PLANETARY (22-TEETH)  
6. 7Y-0661 [3] SHAFT-PLANETARY  
7. 7Y-0662 [4] SHAFT-PLANETARY  
8. 7Y-0663 [4] GEAR-PLANETARY (20-TEETH)  
9. 7Y-0667 [1] RING-RETAINING  
10. 7Y-0673 [1] GEAR-RING (73-TEETH)  
11. 7Y-0676 [3] GEAR-PLANETARY (24-TEETH)  
12. 7Y-0731 [1] CARRIER AS  
12A. 7Y-0656 [3] SHAFT-PLANETARY  
13. 7Y-1094 M [14] WASHER (66X102X1-MM THK)  
14. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
15. 094-0577 B [1] PLATE (7-MM THK)  
16. 094-0578 B [1] PLATE (8-MM THK)  
17. 094-0579 B [1] PLATE (9-MM THK)  
18. 094-0580 B [1] PLATE (10-MM THK)  
19. 110-7231 [1] GEAR-SUN (18-TEETH)  
20. 191-2521 [1] GEAR-SUN (23-TEETH)  
21. 191-2522 [1] RETAINER  
22. 191-2523 [1] CARRIER-PLANETARY  
23. 191-2526 [1] COVER  
24. 191-2645 [1] COUPLING  
25. 196-4873 [2] BEARING AS-BALL  
26. 199-4580 [1] HOUSING  
27. 199-4581 [1] HOUSING  
28. 199-4582 [3] BEARING AS  
29. 199-4583 [11] BEARING AS  
30. 213-4737 [1] SEAL GP-DUO-CONE  
31. 093-1731 [1] RING-RETAINING  
32. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
33. 095-0891 [7] PIN-SPRING  
34. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
35. 2P-3628 [1] SEAL-O-RING  
36. 7M-8485 [2] SEAL-O-RING  
37. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
38. 7Y-0644 [1] SPACER (163X190X8-MM THK)  
39. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
40. 8T-4240 [3] RING-RETAINING  
41. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
42. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP33650318
 

199-4640: DRIVE GP-FINAL

199-4640 DRIVE GP-FINAL -WITHOUT MOTOR
S/N JAB1-465; KDD1-361
FIELD REPLACEMENT FOR @@@@@199-4579@@@@@
i01743705 SEBP3365
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  199-4579 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33650319
 

199-4746: DRIVE GP-FINAL

199-4746 DRIVE GP-FINAL -WITH MOTOR
S/N JAB466-541; KDD362-418
PART OF 191-2576 POWER TRAIN AR
i02061205 SEBP3365
1994746 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4747 Y [1] DRIVE GP-FINAL  
2. 191-5606 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines
Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines
How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader
Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader
CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines
CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader
Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader
Engine Wiring Information
C-9 Engine for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C L :

WIRING GP-QUICK COUPLER
204-1917 WIRING GP-QUICK COUPLER
WIRING GP-FINE SWING
193-3391 WIRING GP-FINE SWING
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-RADIO
197-4306 WIRING GP-RADIO
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP
WIRING GP-WORK TOOL
193-3396 WIRING GP-WORK TOOL
WIRING GP-WORK TOOL
193-3401 WIRING GP-WORK TOOL
DRIVE GP-FINAL
199-4578 DRIVE GP-FINAL
DRIVE GP-FINAL
199-4579 DRIVE GP-FINAL
199-4640 DRIVE GP-FINAL

Truck sale:

 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
Caterpillar 330CL, Crawler Excavators, Construction
55,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
BLANCHARD MACHINERY CO.
Caterpillar 330CL, Crawler Excavators, Construction
48,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
MILTON CAT
Caterpillar 330CL
 
Caterpillar 330CL
- Crawler Excavators
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.