AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

204-3604 WIRING GP-ELECTRONIC CONTROL S/N 4ZF4115-5892 PART OF 208-3027 ENGINE AR 330C L EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 330C L EXCAVATOR DKY
 330C L Excavator DKY00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3366 330C L DKY   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
186-4628 WIRING GP-CONSOLE
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
 

#SEBP33660260
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF4115-5892
PART OF 208-3027 ENGINE AR
i01844179 SEBP3366
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [15] STRAP-CABLE  
3. 188-9865 [1] HARNESS AS-ENGINE (FUEL INJECTOR)  
  3S-2093 [5] STRAP-CABLE  
  105-1797 [5] MOUNT  
  191-7823 [1] RECEPTACLE AS  
4. 201-1283 [1] HARNESS AS-CONTROL (ENGINE ELECTRONIC, LOWER)  
  214-7170 L [1] KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [8] PLUG-SEAL  
  155-2276 [3] WEDGE-PLUG LOCK (3-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  194-5226 [8] WIRE AS (16-GA)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [3] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
5. 223-4453 CY [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)  
6. 117-7032 C [1] WIRE AS  
7. 193-9141 C [2] COVER-TERMINAL  
8. 3E-4353 C [2] WASHER-HARD (11X25X3-MM THK)  
9. 4P-7428 [1] CLIP (LADDER)  
10. 4P-7429 [1] CLIP (LADDER)  
11. 4P-7581 [4] CLIP (LADDER)  
12. 4P-8134 [1] CLIP (LADDER)  
13. 6V-4369 [1] CLIP  
14. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
15. 6V-6317 CM [2] BOLT (M10X1.5X20-MM)  
16. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
17. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
18. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-5451 M [1] BOLT (M6X1X12-MM)  
20. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  L   KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33660261
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF5893-7976
PART OF 208-3027 ENGINE AR
i01901033 SEBP3366
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [24] STRAP-CABLE  
3. 188-9865 [1] HARNESS AS-ENGINE (FUEL INJECTOR)  
  105-1797 [5] MOUNT  
  3S-2093 [5] STRAP-CABLE  
  191-7823 [1] RECEPTACLE AS  
  209-0455 [6] RECEPTACLE AS  
4. 226-0903 C [1] CABLE AS  
5. 230-6279 C [1] HARNESS AS-ENGINE (ENGINE ELCTRONIC-LOWER)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [4] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES PLUG AS & WEDGE)
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [35] PLUG-SEAL  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  172-6062 [1] PLUG AS-CONNECTOR (18-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [6] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  214-7170 L [1] KIT-REPAIR (ELECTRICAL CONNECTORS)  
    (FOR EXTREME COLD CLIMATES)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [8] PLUG-SEAL  
  155-2276 [3] WEDGE-PLUG LOCK (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  194-5226 [1] WIRE AS (16-GA)  
  194-5227 [1] WIRE AS (14-GA)  
6. 223-4453 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)  
7. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
8. 4P-7581 C [5] CLIP (LADDER)  
9. 4P-8134 C [3] CLIP (LADDER)  
10. 5P-7970 CM [1] NUT (M8X1.25-THD)  
11. 6V-4369 [1] CLIP  
12. 6V-5839 C [3] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 CM [4] BOLT (M10X1.5X20-MM)  
14. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 8T-4137 CM [1] BOLT (M10X1.5X20-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  L   KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33660262
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7977-UP
PART OF 208-3027 ENGINE AR
Type 1
i02085032 SEBP3366
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [24] STRAP-CABLE  
3. 215-3249 C [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
  3S-2093 [5] STRAP-CABLE  
  191-7823 [1] RECEPTACLE AS  
4. 226-0903 [1] CABLE AS  
5. 230-6279 [1] HARNESS AS-ENGINE (ENGINE ELECTRONIC-LOWER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  6I-4347 [4] BOOT (4-PIN)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  214-7170 L [1] KIT-REPAIR (ELECTRICAL CONNECTORS)  
    (FOR EXTREME COLD CLIMATES)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [8] PLUG-SEAL  
  155-2276 [3] WEDGE-PLUG LOCK (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  194-5226 [1] WIRE AS (16-GA)  
  194-5227 [1] WIRE AS (14-GA)  
6. 223-4453 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)  
7. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
8. 4P-7581 [5] CLIP (LADDER)  
9. 4P-8134 [3] CLIP (LADDER)  
10. 5P-7970 M [1] NUT (M8X1.25-THD)  
11. 6V-4369 [1] CLIP  
12. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 M [4] BOLT (M10X1.5X20-MM)  
14. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  L   KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33660263
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7977-UP
PART OF 208-3027 ENGINE AR
Type 2
i02556386 SEBP3366
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [24] STRAP-CABLE  
3. 215-3249 [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
  3S-2093 [5] STRAP-CABLE  
  191-7823 [1] RECEPTACLE AS  
4. 226-0903 [1] CABLE AS  
5. 230-6279 [1] HARNESS AS-ENGINE (ENGINE ELECTRONIC-LOWER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  6I-4347 [4] BOOT (4-PIN)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  214-7170 L [1] KIT-REPAIR (ELECTRICAL CONNECTORS)  
    (FOR EXTREME COLD CLIMATES)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [8] PLUG-SEAL  
  155-2276 [3] WEDGE-PLUG LOCK (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  194-5226 [1] WIRE AS (16-GA)  
  194-5227 [1] WIRE AS (14-GA)  
6. 223-4453 CY [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)  
8. 4P-7581 [5] CLIP (LADDER)  
9. 4P-8134 [3] CLIP (LADDER)  
10. 5P-7970 M [1] NUT (M8X1.25-THD)  
11. 6V-4369 [1] CLIP  
12. 6V-5839 C [6] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 CM [2] BOLT (M10X1.5X20-MM)  
14. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-4133 CM [2] NUT (M10X1.5-THD)  
21. 101-3129 CM [2] STUD (M10X1.5-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  L   KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33660264
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7977-UP; 7AZ1-UP
PART OF 208-3027 ENGINE AR
Type 1
i02556396 SEBP3366
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [25] STRAP-CABLE  
3. 215-3249 Y [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
4. 226-0903 [1] CABLE AS  
5. 230-6279 Y [1] HARNESS AS-ENGINE (ECM)  
6. 209-5582 CY [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)  
7. 208-9277 CM [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
8. 4P-7581 [5] CLIP (LADDER)  
9. 4P-8134 [3] CLIP (LADDER)  
10. 5P-7970 M [1] NUT (M8X1.25-THD)  
11. 6V-4369 [1] CLIP  
12. 6V-5839 C [4] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 CM [3] BOLT (M10X1.5X20-MM)  
14. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 283-1226 C [1] BRACKET AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33660265
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7977-UP; 7AZ1-UP
PART OF 208-3027 ENGINE AR
Type 2
i05375373 SEBP3366
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [25] STRAP-CABLE  
3. 546-2154 CY [1] HARNESS AS-CONTROL  
4. 226-0903 [1] CABLE AS  
5. 230-6279 Y [1] HARNESS AS-ENGINE (ECM)  
6. 398-0940 CY [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)  
7. 208-9277 M [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
8. 4P-7581 [5] CLIP (LADDER)  
9. 4P-8134 [3] CLIP (LADDER)  
10. 5P-7970 M [1] NUT (M8X1.25-THD)  
11. 6V-4369 [1] CLIP  
12. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 M [3] BOLT (M10X1.5X20-MM)  
14. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 283-1226 [1] BRACKET AS  
21. 439-4571 C [5] CLIP (LOOP)  
22. 440-0881 CM [5] BOLT-SOCKET HEAD (M8X1.25-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33660266
 

204-1917: WIRING GP-QUICK COUPLER

204-1917 WIRING GP-QUICK COUPLER -QUICK
S/N DKY1-UP
PART OF 210-9920 CONTROL AR-COUPLER
AN ATTACHMENT
i01847189 SEBP3366
2041917 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [4] STRAP-CABLE  
2. 204-1923 [1] HARNESS AS-SWITCH (QUICK COUPLER)  
3. 204-1920 [1] HARNESS AS-SWITCH (QUICK COUPLER)  
    (EACH HARNESS AS INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 3S-2093 [8] STRAP-CABLE  
5. 7N-2353 [1] SWITCH AS-TOGGLE (QUICK COUPLER)  
6. 204-1919 [1] HARNESS AS-SWITCH  
7. 186-4574 [1] PLUG AS  
  9G-3695 [2] PLUG-SEAL  
 

#SEBP33660267
 

193-3401: WIRING GP-WORK TOOL

193-3401 WIRING GP-WORK TOOL
S/N DKY1-UP
PART OF 193-6372 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01642459 SEBP3366
1933401 WIRING GP-WORK TOOL Parts scheme 1933401 WIRING GP-WORK TOOL Parts scheme 1933401 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [27] STRAP-CABLE  
2. 116-0118 [2] CLIP  
3. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
4. 193-3402 [1] HARNESS AS-SOLENOID  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
5. 111-4836 [2] CLIP  
6. 3S-2093 [24] STRAP-CABLE  
7. 4P-7581 [1] CLIP (LADDER)  
8. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
11. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP33660268
 

276-5398: DRIVE AR-FINAL

276-5398 DRIVE AR-FINAL
S/N DKY1-UP
AN ATTACHMENT
i02524764 SEBP3366
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  276-5399 Y [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
  282-2987 Y [1] GUARD GP-TRAVEL MOTOR  
  282-0906 Y [1] LINES GP-TRAVEL MOTOR  
  232-4053 Y [1] MANIFOLD GP-CONTROL (PILOT OIL)  
  282-0908 Y [1] VALVE GP-MANIFOLD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33660269
 

199-4578: DRIVE GP-FINAL

199-4578 DRIVE GP-FINAL
S/N DKY1-1049
WITH MOTOR
PART OF 191-2576 POWER TRAIN AR
i01643465 SEBP3366
1994578 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4579 Y [1] DRIVE GP-FINAL  
2. 191-5606 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines
Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines
How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader
Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader
CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines
CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader
Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader
Engine Wiring Information
C-9 Engine for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C L :

WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
186-4628 WIRING GP-CONSOLE
WIRING GP-CONSOLE
186-4572 WIRING GP-CONSOLE
WIRING GP-CONSOLE
177-8597 WIRING GP-CONSOLE
WIRING GP-CONSOLE
170-6909 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
238-7542 WIRING GP-COMMUNICATION
WIRING GP-CHASSIS
193-3393 WIRING GP-CHASSIS
WIRING GP-CAB
190-1020 WIRING GP-CAB
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-QUICK COUPLER
204-1917 WIRING GP-QUICK COUPLER
WIRING GP-WORK TOOL
193-3401 WIRING GP-WORK TOOL
276-5398 DRIVE AR-FINAL

Truck sale:

 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
Caterpillar 330CL, Crawler Excavators, Construction
55,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
BLANCHARD MACHINERY CO.
Caterpillar 330CL, Crawler Excavators, Construction
48,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
MILTON CAT
Caterpillar 330CL
 
Caterpillar 330CL
- Crawler Excavators
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.