AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3408C Natural Gas Engine Low Emission BAZ00001-UP ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



GAS ENGINE G3408C GAS ENGINE BAZ
 G3408C Natural Gas Engine Low Emission BAZ00001-UP SEBP3368 G3408C BAZ   (1999)

Parts group G3408C:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
S/N BAZ1-2233
FOR USE WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
S/N BAZ2234-UP
FOR USE WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
1W-1852 MOUNTING GP-ALTERNATOR
1W-1852 MOUNTING GP-ALTERNATOR
FOR USE WITH LOW RPM ENGINES WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
AN ATTACHMENT
ALTERNATOR GP-CHARGING
266-7227 ALTERNATOR GP-CHARGING
266-7227 ALTERNATOR GP-CHARGING
24-VOLT, 60-AMPERE
FIELD REPLACEMENT FOR @@@@@ 4N-3986@@@@@
ALTERNATOR GP-CHARGING
298-8838 ALTERNATOR GP-CHARGING
298-8838 ALTERNATOR GP-CHARGING
24-VOLT, 65-AMPERE
AN ATTACHMENT
ALTERNATOR GP-CHARGING
331-5717 ALTERNATOR GP-CHARGING
331-5717 ALTERNATOR GP-CHARGING
24-VOLT, 105-AMPERE
FIELD INSTALLATION
ALTERNATOR GP-CHARGING
333-1184 ALTERNATOR GP-CHARGING
333-1184 ALTERNATOR GP-CHARGING
24-VOLT,60-AMPERE
PART OF 527-5355, 527-5356 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT FOR @@@@@ 4N-3986@@@@@
AN ATTACHMENT
ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING
24-VOLT, 60-AMPERE
Type 1
FIELD REPLACEMENT ORDER @@@@@333-1184@@@@@, @@@@@266-7227@@@@@, 1- 3T-4688 TERMINAL-RING
AN ATTACHMENT
ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING
24-VOLT, 60-AMPERE
Type 2
FIELD REPLACEMENT ORDER @@@@@333-1184@@@@@, @@@@@266-7227@@@@@, 1- 3T-4688 TERMINAL-RING
AN ATTACHMENT
ALTERNATOR GP-CHARGING
527-5355 ALTERNATOR GP-CHARGING
527-5355 ALTERNATOR GP-CHARGING
AN ATTACHMENT
ALTERNATOR GP-CHARGING
527-5356 ALTERNATOR GP-CHARGING
527-5356 ALTERNATOR GP-CHARGING
AN ATTACHMENT
ALTERNATOR GP-CHARGING
6N-9294 ALTERNATOR GP-CHARGING
6N-9294 ALTERNATOR GP-CHARGING
24-VOLT, 35-AMPERE
AN ATTACHMENT
BOX GP
BOX AS-TERMINAL
130-7480 BOX AS-TERMINAL
130-7480 BOX AS-TERMINAL
PART OF 138-8356 BOX GP-CONTROL, 208-8127 WIRING GP-SHUTOFF
AN ATTACHMENT
BOX AS-TERMINAL
136-3335 BOX AS-TERMINAL
136-3335 BOX AS-TERMINAL
PART OF 138-8357, 142-6210, 142-6213 BOX GP-CONTROL, 136-3336, 189-6366, 203-6687 WIRING GP-EIS
AN ATTACHMENT
BOX GP-CONTROL
138-8356 BOX GP-CONTROL
138-8356 BOX GP-CONTROL -EIS
FOR USE WITH ENGINES WITH SHUTOFFS
AN ATTACHMENT
BOX GP-CONTROL
138-8357 BOX GP-CONTROL
138-8357 BOX GP-CONTROL -EIS
FOR USE WITH ENGINES WITHOUT SHUTOFFS
AN ATTACHMENT
BOX GP-CONTROL
142-6210 BOX GP-CONTROL
142-6210 BOX GP-CONTROL -EIS
CSA
AN ATTACHMENT
BOX GP-CONTROL
142-6213 BOX GP-CONTROL
142-6213 BOX GP-CONTROL -EIS
CSA
FOR USE WITH ENGINES WITHOUT SHUTOFFS
AN ATTACHMENT
MOUNTING GP-TERMINAL STRIP
194-0909 MOUNTING GP-TERMINAL STRIP
194-0909 MOUNTING GP-TERMINAL STRIP
FOR USE WITH ENGINES WITH EIS/70 PIN CONNECTORS/EMCP II
AN ATTACHMENT
PLUG GP-BOX
234-6044 PLUG GP-BOX
234-6044 PLUG GP-BOX
AN ATTACHMENT
PLUG GP-BOX
311-3017 PLUG GP-BOX
311-3017 PLUG GP-BOX
AN ATTACHMENT
STRIP AS-TERMINAL
157-2792 STRIP AS-TERMINAL
157-2792 STRIP AS-TERMINAL -EMCP II
PART OF 119-6031 PANEL GP-CONTROL
AN ATTACHMENT
CIRCUIT BREAKER GP
CIRCUIT BREAKER GP
5N-0369 CIRCUIT BREAKER GP
5N-0369 CIRCUIT BREAKER GP
60-AMPERE
FOR USE WITH 6N-9294 ALTERNATOR GP-CHARGING, 6N-2926 MOUNTING GP-ALTERNATOR, 8M-7892 AMMETER GP
AN ATTACHMENT
CIRCUIT BREAKER GP
6T-3645 CIRCUIT BREAKER GP
6T-3645 CIRCUIT BREAKER GP
60-AMPERE
PART OF 5N-0369 CIRCUIT BREAKER GP
AN ATTACHMENT
CONTROL GP-ELECTRONIC
426-5362 INSTALLATION GP-COMMUNICATION
426-5362 INSTALLATION GP-COMMUNICATION -PLE601 NETWORK MANAGER
FIELD INSTALLATION
ELECTRONICS GP-ENGINE
CONTROL & MTG GP-ENGINE ELEK
418-6870 CONTROL & MTG GP-ENGINE ELEK
418-6870 CONTROL & MTG GP-ENGINE ELEK
CSA
PART OF 418-6875 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
128-2500 CONTROL GP-ENGINE ELECTRONIC
128-2500 CONTROL GP-ENGINE ELECTRONIC
PART OF 142-6208, 142-6211, 144-7161, 183-3444, 214-2431, 216-4021, 216-4022, 223-2159, 223-2160, 234-9636, 234-9637 IGNITION GP-GAS ENGINE
AN ATTACHMENT
183-5961 CONTROL GP-ENGINE ELECTRONIC
183-5961 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
205-0627 CONTROL GP-ENGINE ELECTRONIC
205-0627 CONTROL GP-ENGINE ELECTRONIC
S/N BAZ2465-UP
PART OF 128-2500 CONTROL GP-ENGINE ELECTRONIC
Type 1
AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
205-0627 CONTROL GP-ENGINE ELECTRONIC
205-0627 CONTROL GP-ENGINE ELECTRONIC
S/N BAZ2465-UP
PART OF 128-2500 CONTROL GP-ENGINE ELECTRONIC
Type 2
AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
308-5087 CONTROL GP-ENGINE ELECTRONIC
308-5087 CONTROL GP-ENGINE ELECTRONIC
PART OF 318-4737 CONTROL GP-ENGINE ELECTRONIC, 308-7752 SENSOR & MTG GP-ELECTRIC
AN ATTACHMENT
308-5690 CONTROL GP-ENGINE ELECTRONIC
308-5690 CONTROL GP-ENGINE ELECTRONIC
FOR USE WITH NSPS
AN ATTACHMENT
318-4737 CONTROL GP-ENGINE ELECTRONIC
318-4737 CONTROL GP-ENGINE ELECTRONIC
S/N BAZ2465-UP
AN ATTACHMENT
426-5362 INSTALLATION GP-COMMUNICATION
426-5362 INSTALLATION GP-COMMUNICATION -PLE601 NETWORK MANAGER
FIELD INSTALLATION
CONTROL GP-GENERATOR SET
368-7106 CONTROL GP-GENERATOR SET
368-7106 CONTROL GP-GENERATOR SET
PART OF 418-6662 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT
CONTROL GP-GENERATOR SET
450-9620 CONTROL GP-GENERATOR SET
450-9620 CONTROL GP-GENERATOR SET
CONTROL GP-VOLTAGE
CONTROL GP-VOLTAGE
318-4653 CONTROL GP-VOLTAGE
318-4653 CONTROL GP-VOLTAGE
S/N BAZ2465-UP
24-VOLT
PART OF 308-7755 SENSOR & MTG GP-ELECTRIC
AN ATTACHMENT
IGNITION GP
214-6130 CONVERSION GP-IGNITION
214-6130 CONVERSION GP-IGNITION
FOR USE WITH ENGINES WITH EIS IGNITION SYSTEMS AND 206-7745 CYLINDER HEAD
FIELD INSTALLATION
214-6131 CONVERSION GP-IGNITION
214-6131 CONVERSION GP-IGNITION
FOR USE WITH ENGINES WITH EIS IGNITION SYSTEMS AND 206-7745 CYLINDER HEAD
FIELD INSTALLATION
226-1801 CONVERSION GP-IGNITION
226-1801 CONVERSION GP-IGNITION
FOR USE WITH TALLER CYLINDER HEAD AND ELECTRONIC IGNITION SYSTEM
FIELD INSTALLATION
226-1802 CONVERSION GP-IGNITION
226-1802 CONVERSION GP-IGNITION
FOR USE WITH TALLER CYLINDER HEAD AND CERTIFIED ELECTRONIC IGNITION SYSTEM
FIELD INSTALLATION
IGNITION GP-GAS ENGINE
142-6208 IGNITION GP-GAS ENGINE
142-6208 IGNITION GP-GAS ENGINE
AN ATTACHMENT
IGNITION GP-GAS ENGINE
142-6211 IGNITION GP-GAS ENGINE
142-6211 IGNITION GP-GAS ENGINE
AN ATTACHMENT
IGNITION GP-GAS ENGINE
144-7161 IGNITION GP-GAS ENGINE
144-7161 IGNITION GP-GAS ENGINE
AN ATTACHMENT
IGNITION GP-GAS ENGINE
183-3444 IGNITION GP-GAS ENGINE
183-3444 IGNITION GP-GAS ENGINE
AN ATTACHMENT
IGNITION GP-GAS ENGINE
214-2431 IGNITION GP-GAS ENGINE
214-2431 IGNITION GP-GAS ENGINE
AN ATTACHMENT
IGNITION GP-GAS ENGINE
216-4021 IGNITION GP-GAS ENGINE
216-4021 IGNITION GP-GAS ENGINE
Type 1
FOR USE WITH ENGINES CONFIGURED FOR EIS IGNITION SYSTEMS
AN ATTACHMENT
IGNITION GP-GAS ENGINE
216-4021 IGNITION GP-GAS ENGINE
216-4021 IGNITION GP-GAS ENGINE
Type 2
FOR USE WITH ENGINES CONFIGURED FOR EIS IGNITION SYSTEMS
AN ATTACHMENT
IGNITION GP-GAS ENGINE
216-4022 IGNITION GP-GAS ENGINE
216-4022 IGNITION GP-GAS ENGINE
Type 1
AN ATTACHMENT
IGNITION GP-GAS ENGINE
216-4022 IGNITION GP-GAS ENGINE
216-4022 IGNITION GP-GAS ENGINE
Type 2
AN ATTACHMENT
IGNITION GP-GAS ENGINE
223-2159 IGNITION GP-GAS ENGINE
223-2159 IGNITION GP-GAS ENGINE
Type 1
FOR USE WITH ENGINES CONFIGURED FOR EIS IGNITION SYSTEMS
AN ATTACHMENT
IGNITION GP-GAS ENGINE
223-2159 IGNITION GP-GAS ENGINE
223-2159 IGNITION GP-GAS ENGINE
Type 2
FOR USE WITH ENGINES CONFIGURED FOR EIS IGNITION SYSTEMS
AN ATTACHMENT
IGNITION GP-GAS ENGINE
223-2159 IGNITION GP-GAS ENGINE
223-2159 IGNITION GP-GAS ENGINE
Type 3
FOR USE WITH ENGINES CONFIGURED FOR EIS IGNITION SYSTEMS
AN ATTACHMENT
IGNITION GP-GAS ENGINE
223-2160 IGNITION GP-GAS ENGINE
223-2160 IGNITION GP-GAS ENGINE
FOR USE WITH ENGINES CONFIGURED FOR EIS IGNITION SYSTEMS AND A PSG GOVERNOR
AN ATTACHMENT
IGNITION GP-GAS ENGINE
234-9636 IGNITION GP-GAS ENGINE
234-9636 IGNITION GP-GAS ENGINE
Type 1
AN ATTACHMENT
IGNITION GP-GAS ENGINE
234-9636 IGNITION GP-GAS ENGINE
234-9636 IGNITION GP-GAS ENGINE
Type 2
AN ATTACHMENT
IGNITION GP-GAS ENGINE
234-9637 IGNITION GP-GAS ENGINE
234-9637 IGNITION GP-GAS ENGINE
S/N BAZ2465-UP
Type 1
AN ATTACHMENT
IGNITION GP-GAS ENGINE
234-9637 IGNITION GP-GAS ENGINE
234-9637 IGNITION GP-GAS ENGINE
S/N BAZ2465-UP
Type 2
AN ATTACHMENT
IGNITION GP-GAS ENGINE
234-9637 IGNITION GP-GAS ENGINE
234-9637 IGNITION GP-GAS ENGINE
S/N BAZ2465-UP
Type 3
AN ATTACHMENT
IGNITION GP-GAS ENGINE
418-6879 IGNITION GP-GAS ENGINE
418-6879 IGNITION GP-GAS ENGINE
AN ATTACHMENT
SENSOR GP
379-0138 KIT-SENSOR & MOUNTING
379-0138 KIT-SENSOR & MOUNTING
S/N BAZ2465-UP
FIELD REPLACEMENT FOR @@@@@480-5469@@@@@
FOR USE WITH @@@@@307-7360@@@@@
SENSOR & MOUNTING GP
108-1655 SENSOR & MOUNTING GP
108-1655 SENSOR & MOUNTING GP
AN ATTACHMENT
SENSOR & MOUNTING GP
307-7360 SENSOR & MOUNTING GP
307-7360 SENSOR & MOUNTING GP
S/N BAZ2465-UP
PART OF 308-5689, 308-7753 SENSOR & MTG GP-ELECTRIC
Type 1
AN ATTACHMENT
SENSOR & MOUNTING GP
307-7360 SENSOR & MOUNTING GP
307-7360 SENSOR & MOUNTING GP
S/N BAZ2465-UP
PART OF 308-5689, 308-7753 SENSOR & MTG GP-ELECTRIC
Type 2
AN ATTACHMENT
SENSOR & MTG GP-ELECTRIC
308-5689 SENSOR & MTG GP-ELECTRIC
308-5689 SENSOR & MTG GP-ELECTRIC
PART OF 308-5690 CONTROL GP-ENGINE ELECTRONIC
FOR USE WITH NSPS
AN ATTACHMENT
SENSOR & MTG GP-ELECTRIC
308-5689 SENSOR & MTG GP-ELECTRIC
308-5689 SENSOR & MTG GP-ELECTRIC
Type 1
FOR USE WITH NSPS
AN ATTACHMENT
SENSOR & MTG GP-ELECTRIC
308-5689 SENSOR & MTG GP-ELECTRIC
308-5689 SENSOR & MTG GP-ELECTRIC
Type 2
FOR USE WITH NSPS
AN ATTACHMENT
SENSOR & MTG GP-ELECTRIC
308-7752 SENSOR & MTG GP-ELECTRIC
308-7752 SENSOR & MTG GP-ELECTRIC
AN ATTACHMENT
SENSOR & MTG GP-ELECTRIC
308-7753 SENSOR & MTG GP-ELECTRIC
308-7753 SENSOR & MTG GP-ELECTRIC
S/N BAZ2465-UP
PART OF 318-4737 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT
SENSOR & MTG GP-ELECTRIC
308-7755 SENSOR & MTG GP-ELECTRIC
308-7755 SENSOR & MTG GP-ELECTRIC
S/N BAZ2465-UP
AN ATTACHMENT
SENSOR GP-ENGINE
183-3694 SENSOR GP-ENGINE
183-3694 SENSOR GP-ENGINE
PART OF 183-5961 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT
SENSOR GP-NITROGEN OXIDE
304-4209 SENSOR GP-NITROGEN OXIDE
304-4209 SENSOR GP-NITROGEN OXIDE
S/N BAZ2465-UP
PART OF 307-7360 SENSOR & MOUNTING GP
REPLACED BY @@@@@379-0138@@@@@
AN ATTACHMENT
SENSOR GP-NITROGEN OXIDE
480-5469 SENSOR GP-NITROGEN OXIDE
480-5469 SENSOR GP-NITROGEN OXIDE
S/N BAZ2465-UP
24-VOLT
PART OF 307-7360 SENSOR & MOUNTING GP
FIELD REPLACEMENT ORDER @@@@@379-0138@@@@@
AN ATTACHMENT
SENSOR GP-PRESSURE
3E-1854 SENSOR GP-PRESSURE
3E-1854 SENSOR GP-PRESSURE
PART OF 108-1655 SENSOR & MOUNTING GP
AN ATTACHMENT
SENSOR GP-SPEED
189-5746 SENSOR GP-SPEED
189-5746 SENSOR GP-SPEED
PART OF 198-2793, 202-4928 METER GP-SERVICE
FIELD REPLACEMENT ORDER @@@@@318-1181@@@@@
AN ATTACHMENT
SENSOR GP-SPEED
212-6298 SENSOR GP-SPEED
212-6298 SENSOR GP-SPEED
FOR USE WITH EMCPII AND CDIS IGNITION
AN ATTACHMENT
SENSOR GP-SPEED
265-9034 SENSOR GP-SPEED
265-9034 SENSOR GP-SPEED
PART OF 108-1655 SENSOR & MOUNTING GP
AN ATTACHMENT
SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
MAGNETIC, LOW OUTPUT
FIELD REPLACEMENT FOR @@@@@189-5746@@@@@
SENSOR GP-SPEED
9X-5392 SENSOR GP-SPEED
9X-5392 SENSOR GP-SPEED -MAGNETIC, LOW OUTPUT
PART OF 217-5226 ACTUATOR GP-ELECTRONIC, 308-5689, 308-7753 SENSOR & MTG GP-ELECTRIC, 183-3694 SENSOR GP-ENGINE, 212-6298 SENSOR GP-SPEED
AN ATTACHMENT
SOLENOID GP
VALVE GP-SOLENOID
103-0692 VALVE GP-SOLENOID
103-0692 VALVE GP-SOLENOID -GAS SHUTOFF
24-VOLT
PART OF 9Y-6992 VALVE GP-SOLENOID
AN ATTACHMENT
VALVE GP-SOLENOID
130-5177 VALVE GP-SOLENOID
130-5177 VALVE GP-SOLENOID -AIR START
PART OF 132-6898 CONTROL GP-AIR STARTING
AN ATTACHMENT
VALVE GP-SOLENOID
251-9396 VALVE GP-SOLENOID
251-9396 VALVE GP-SOLENOID -AIR STARTING
PART OF 311-3021 CONTROL GP-AIR STARTING
FOR USE WITH A3 CONTROL
AN ATTACHMENT
VALVE GP-SOLENOID
538-8796 VALVE GP-SOLENOID
538-8796 VALVE GP-SOLENOID
AN ATTACHMENT
VALVE GP-SOLENOID
9Y-6992 VALVE GP-SOLENOID
9Y-6992 VALVE GP-SOLENOID -GAS SHUTOFF
AN ATTACHMENT
STARTING MOTOR GP
CONTROL GP-AIR STARTING
132-6898 CONTROL GP-AIR STARTING
132-6898 CONTROL GP-AIR STARTING
AN ATTACHMENT
CONTROL GP-AIR STARTING
311-3021 CONTROL GP-AIR STARTING
311-3021 CONTROL GP-AIR STARTING
AN ATTACHMENT
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
PART OF 352-9766, 6V-0927 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
STARTING MOTOR GP-AIR
7W-0299 STARTING MOTOR GP-AIR
7W-0299 STARTING MOTOR GP-AIR
RH MOUNTED-RH CONTROL
FOR USE WITH KPA BETWEEN 620 & 1034, ONLY PRESSURE REGULATOR (OVER 1034 KPA)
CANNOT BE USED WITH NATURAL GAS WITH GREATER THAN 0.1 PERCENT HYDROGEN SULFIDE
AN ATTACHMENT
STARTING MOTOR GP-AIR
7W-0301 STARTING MOTOR GP-AIR
7W-0301 STARTING MOTOR GP-AIR
PART OF 7W-0299 STARTING MOTOR GP-AIR
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
Type 1
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
Type 2
STARTING MOTOR GP-ELECTRIC
2S-7227 STARTING MOTOR GP-ELECTRIC
2S-7227 STARTING MOTOR GP-ELECTRIC
24-VOLT. RH MOUNTED
Type 1
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
2S-7227 STARTING MOTOR GP-ELECTRIC
2S-7227 STARTING MOTOR GP-ELECTRIC
24-VOLT. RH MOUNTED
Type 2
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 2S-7227 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
6V-0927 STARTING MOTOR GP-ELECTRIC
6V-0927 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 2S-7227 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
VALVE GP-AIR STARTING
1L-5011 VALVE GP-AIR STARTING
1L-5011 VALVE GP-AIR STARTING
REQUIRED WHEN AIR SUPPLY PRESSURE EXCEEDS 1034 KPA. REGULATING AND PRESSURE REDUCING
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT
WIRING GP-AIR STARTING
113-8964 WIRING GP-AIR STARTING
113-8964 WIRING GP-AIR STARTING
AN ATTACHMENT
SWITCH GP
SWITCH GP-MAGNETIC
175-2308 SWITCH GP-MAGNETIC
175-2308 SWITCH GP-MAGNETIC
24-VOLT
PART OF 195-8030 WIRING GP-ENGINE
AN ATTACHMENT
TRANSFORMER GP
TRANSFORMER AS
437-4077 TRANSFORMER AS
437-4077 TRANSFORMER AS
PART OF 437-4050 TRANSFORMER GP-IGNITION
321-1329 TRANSFORMER GP
321-1329 TRANSFORMER GP -CURRENT
2000:5 RATIO
AN ATTACHMENT
TRANSFORMER GP
327-9366 TRANSFORMER GP
327-9366 TRANSFORMER GP
FIELD INSTALLATION
206-0240 TRANSFORMER GP-CURRENT
206-0240 TRANSFORMER GP-CURRENT
5000:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0241 TRANSFORMER GP-CURRENT
206-0241 TRANSFORMER GP-CURRENT
1500:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0242 TRANSFORMER GP-CURRENT
206-0242 TRANSFORMER GP-CURRENT
2000:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0243 TRANSFORMER GP-CURRENT
206-0243 TRANSFORMER GP-CURRENT
2500:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0244 TRANSFORMER GP-CURRENT
206-0244 TRANSFORMER GP-CURRENT
3000:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0245 TRANSFORMER GP-CURRENT
206-0245 TRANSFORMER GP-CURRENT
4000:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0246 TRANSFORMER GP-CURRENT
206-0246 TRANSFORMER GP-CURRENT
3500:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0247 TRANSFORMER GP-CURRENT
206-0247 TRANSFORMER GP-CURRENT
200:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0248 TRANSFORMER GP-CURRENT
206-0248 TRANSFORMER GP-CURRENT
300:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0249 TRANSFORMER GP-CURRENT
206-0249 TRANSFORMER GP-CURRENT
400:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0250 TRANSFORMER GP-CURRENT
206-0250 TRANSFORMER GP-CURRENT
600:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0251 TRANSFORMER GP-CURRENT
206-0251 TRANSFORMER GP-CURRENT
800:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0252 TRANSFORMER GP-CURRENT
206-0252 TRANSFORMER GP-CURRENT
500:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
206-0253 TRANSFORMER GP-CURRENT
206-0253 TRANSFORMER GP-CURRENT
900:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT
229-5837 TRANSFORMER GP-CURRENT
229-5837 TRANSFORMER GP-CURRENT
1000:5 RATIO
AN ATTACHMENT
229-5838 TRANSFORMER GP-CURRENT
229-5838 TRANSFORMER GP-CURRENT
1200:5 RATIO
AN ATTACHMENT
328-1487 TRANSFORMER GP-CURRENT
328-1487 TRANSFORMER GP-CURRENT
2500:5 RATIO
AN ATTACHMENT
TRANSFORMER GP-IGNITION
232-6348 TRANSFORMER GP-IGNITION
232-6348 TRANSFORMER GP-IGNITION
PART OF 183-3444 IGNITION GP-GAS ENGINE, 327-9366 TRANSFORMER GP
AN ATTACHMENT AND FIELD INSTALLATION
TRANSFORMER GP-IGNITION
232-6349 TRANSFORMER GP-IGNITION
232-6349 TRANSFORMER GP-IGNITION
PART OF 142-6208, 142-6211, 144-7161, 214-2431 IGNITION GP-GAS ENGINE
AN ATTACHMENT AND FIELD INSTALLATION
TRANSFORMER GP-IGNITION
232-6352 TRANSFORMER GP-IGNITION
232-6352 TRANSFORMER GP-IGNITION
PART OF 223-2159 IGNITION GP-GAS ENGINE, 327-9367 TRANSFORMER GP-IGNITION
AN ATTACHMENT
TRANSFORMER GP-IGNITION
232-6353 TRANSFORMER GP-IGNITION
232-6353 TRANSFORMER GP-IGNITION
PART OF 234-9637 IGNITION GP-GAS ENGINE, 327-9369 TRANSFORMER GP-IGNITION
AN ATTACHMENT
TRANSFORMER GP-IGNITION
327-9367 TRANSFORMER GP-IGNITION
327-9367 TRANSFORMER GP-IGNITION
PART OF 223-2159, 223-2160, 234-9637 IGNITION GP-GAS ENGINE
AN ATTACHMENT
TRANSFORMER GP-IGNITION
327-9369 TRANSFORMER GP-IGNITION
327-9369 TRANSFORMER GP-IGNITION
PART OF 216-4021, 216-4022, 234-9636 IGNITION GP-GAS ENGINE
AN ATTACHMENT
TRANSFORMER GP-IGNITION
437-4049 TRANSFORMER GP-IGNITION
437-4049 TRANSFORMER GP-IGNITION
AN ATTACHMENT
TRANSFORMER GP-IGNITION
437-4050 TRANSFORMER GP-IGNITION
437-4050 TRANSFORMER GP-IGNITION
FIELD INSTALLATION
TRANSFORMER GP-IGNITION
437-4075 TRANSFORMER GP-IGNITION
437-4075 TRANSFORMER GP-IGNITION
PART OF 437-4049 TRANSFORMER GP-IGNITION
AN ATTACHMENT
TRANSFORMER GP-IGNITION
437-4124 TRANSFORMER GP-IGNITION
437-4124 TRANSFORMER GP-IGNITION
PART OF 223-2159, 234-9637 IGNITION GP-GAS ENGINE
AN ATTACHMENT
TRANSFORMER GP-IGNITION
437-4125 TRANSFORMER GP-IGNITION
437-4125 TRANSFORMER GP-IGNITION
PART OF 437-4124 TRANSFORMER GP-IGNITION
AN ATTACHMENT
TRANSFORMER GP-IGNITION
437-4126 TRANSFORMER GP-IGNITION
437-4126 TRANSFORMER GP-IGNITION
PART OF 437-4127, 437-4129 TRANSFORMER GP-IGNITION
AN ATTACHMENT
TRANSFORMER GP-IGNITION
437-4127 TRANSFORMER GP-IGNITION
437-4127 TRANSFORMER GP-IGNITION
PART OF 216-4021, 216-4022, 234-9636 IGNITION GP-GAS ENGINE
AN ATTACHMENT
TRANSFORMER GP-IGNITION
437-4129 TRANSFORMER GP-IGNITION
437-4129 TRANSFORMER GP-IGNITION
PART OF 418-6879 IGNITION GP-GAS ENGINE
AN ATTACHMENT
TRANSFORMER GP-POTENTIAL
175-7748 TRANSFORMER GP-POTENTIAL
175-7748 TRANSFORMER GP-POTENTIAL
PART OF 158-6172 CONVERSION AR
AN ATTACHMENT
TRANSFORMER-CURRENT
5N-5433 TRANSFORMER-CURRENT
5N-5433 TRANSFORMER-CURRENT
RATIO 600:5
AN ATTACHMENT
VALVE GP
VALVE GP-AIR CONTROL
4W-5424 VALVE GP-AIR CONTROL
4W-5424 VALVE GP-AIR CONTROL
PART OF 7W-0299 STARTING MOTOR GP-AIR
AN ATTACHMENT
VALVE GP-AIR STARTING
1L-5011 VALVE GP-AIR STARTING
1L-5011 VALVE GP-AIR STARTING
REQUIRED WHEN AIR SUPPLY PRESSURE EXCEEDS 1034 KPA. REGULATING AND PRESSURE REDUCING
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT
VALVE GP-SOLENOID
103-0692 VALVE GP-SOLENOID
103-0692 VALVE GP-SOLENOID -GAS SHUTOFF
24-VOLT
PART OF 9Y-6992 VALVE GP-SOLENOID
AN ATTACHMENT
VALVE GP-SOLENOID
130-5177 VALVE GP-SOLENOID
130-5177 VALVE GP-SOLENOID -AIR START
PART OF 132-6898 CONTROL GP-AIR STARTING
AN ATTACHMENT
VALVE GP-SOLENOID
251-9396 VALVE GP-SOLENOID
251-9396 VALVE GP-SOLENOID -AIR STARTING
PART OF 311-3021 CONTROL GP-AIR STARTING
FOR USE WITH A3 CONTROL
AN ATTACHMENT
VALVE GP-SOLENOID
538-8796 VALVE GP-SOLENOID
538-8796 VALVE GP-SOLENOID
AN ATTACHMENT
VALVE GP-SOLENOID
9Y-6992 VALVE GP-SOLENOID
9Y-6992 VALVE GP-SOLENOID -GAS SHUTOFF
AN ATTACHMENT
WIRING GP
FASTENER GP-WIRING HARNESS
132-0140 FASTENER GP-WIRING HARNESS
132-0140 FASTENER GP-WIRING HARNESS
DIGITAL VOLTAGE REGULATOR
AN ATTACHMENT
FASTENER GP-WIRING HARNESS
195-8033 FASTENER GP-WIRING HARNESS
195-8033 FASTENER GP-WIRING HARNESS
AN ATTACHMENT
426-5362 INSTALLATION GP-COMMUNICATION
426-5362 INSTALLATION GP-COMMUNICATION -PLE601 NETWORK MANAGER
FIELD INSTALLATION
PLUG GP-CONNECTOR
204-0333 PLUG GP-CONNECTOR
204-0333 PLUG GP-CONNECTOR -PROTECTIVE COVER
FOR USE WITH ENGINES WITHOUT AIR START SOLENOID VALVE
AN ATTACHMENT
SENSOR GP-PRESSURE
3E-1854 SENSOR GP-PRESSURE
3E-1854 SENSOR GP-PRESSURE
PART OF 108-1655 SENSOR & MOUNTING GP
AN ATTACHMENT
WIRING GP-AIR STARTING
113-8964 WIRING GP-AIR STARTING
113-8964 WIRING GP-AIR STARTING
AN ATTACHMENT
WIRING GP-EIS
136-3336 WIRING GP-EIS
136-3336 WIRING GP-EIS -EIS
FOR USE WITH ENGINES WITHOUT SHUTOFFS
AN ATTACHMENT
WIRING GP-EIS
189-6366 WIRING GP-EIS
189-6366 WIRING GP-EIS
AN ATTACHMENT
WIRING GP-EIS
203-6687 WIRING GP-EIS
203-6687 WIRING GP-EIS
EIS WITHOUT SHUTOFFS
AN ATTACHMENT
WIRING GP-ELECTRONIC CONTROL
418-6875 WIRING GP-ELECTRONIC CONTROL
418-6875 WIRING GP-ELECTRONIC CONTROL
CSA
PART OF 418-6876 WIRING GP-ENGINE
AN ATTACHMENT
WIRING GP-ENGINE
194-0905 WIRING GP-ENGINE
194-0905 WIRING GP-ENGINE
FOR USE WITH EIS
AN ATTACHMENT
WIRING GP-ENGINE
195-8029 WIRING GP-ENGINE
195-8029 WIRING GP-ENGINE
FOR USE WITH EIS 70 PIN CONNECTOR, AIR START HARNESS
AN ATTACHMENT
WIRING GP-ENGINE
195-8030 WIRING GP-ENGINE
195-8030 WIRING GP-ENGINE
INDUSTRIAL, ELECTRIC START
AN ATTACHMENT
WIRING GP-ENGINE
204-0329 WIRING GP-ENGINE
204-0329 WIRING GP-ENGINE
FOR USE WITH NON-CSA ENGINES WITH EMCP II AND 70 PIN CONNECTOR WIRING SYSTEM
AN ATTACHMENT
WIRING GP-ENGINE
204-0331 WIRING GP-ENGINE
204-0331 WIRING GP-ENGINE
FOR USE WITH CSA ENGINES WITH EMCP II AND 70 PIN CONNECTOR WIRING SYSTEM
AN ATTACHMENT
WIRING GP-ENGINE
311-3010 WIRING GP-ENGINE
311-3010 WIRING GP-ENGINE
AN ATTACHMENT
WIRING GP-ENGINE
393-4621 WIRING GP-ENGINE
393-4621 WIRING GP-ENGINE
FOR USE WITH G3400 EIS
AN ATTACHMENT
WIRING GP-ENGINE
418-6876 WIRING GP-ENGINE
418-6876 WIRING GP-ENGINE -CSA
AN ATTACHMENT
WIRING GP-PANEL
113-8963 WIRING GP-PANEL
113-8963 WIRING GP-PANEL -ELECTRIC START
AN ATTACHMENT
WIRING GP-PANEL
194-0908 WIRING GP-PANEL
194-0908 WIRING GP-PANEL -SPEED CONTROL
FOR USE WITH EIS WITH 70 PIN CONNECTORS, EMCP II
AN ATTACHMENT
WIRING GP-PANEL
222-8679 WIRING GP-PANEL
222-8679 WIRING GP-PANEL -CABLE FITTING
FOR USE WITH 2-INCH CONNECTOR
AN ATTACHMENT
WIRING GP-PANEL
222-8680 WIRING GP-PANEL
222-8680 WIRING GP-PANEL -CABLE FITTING
FOR USE WITH 1.25-INCH CONNECTOR
AN ATTACHMENT
248-4905 WIRING GP-PANEL
248-4905 WIRING GP-PANEL -VR6 VOLTAGE REGULATOR
AN ATTACHMENT
WIRING GP-PANEL
255-4686 WIRING GP-PANEL
255-4686 WIRING GP-PANEL -CABLE FITTING
FOR USE WITH 1-IN CONNECTOR
AN ATTACHMENT
WIRING GP-SHUTOFF
208-8127 WIRING GP-SHUTOFF
208-8127 WIRING GP-SHUTOFF
FOR USE WITH AIR FUEL RATIO CONTROL AND SHUTOFFS
AN ATTACHMENT
WIRING GP-SHUTOFF
393-4622 WIRING GP-SHUTOFF
393-4622 WIRING GP-SHUTOFF
FOR USE WITH G3400 EIS
CANNOT BE USED WITH STG WRG
AN ATTACHMENT
RELAY GP
158-6181 RELAY GP
158-6181 RELAY GP
24 VOLT DC. 3-POLE
PART OF 158-6171, 158-6172, 318-6263 CONVERSION AR
AN ATTACHMENT
ELECTRONICS GP-MONITOR
CONTROL GP-ENGINE MONITORING
3E-8542 CONTROL GP-ENGINE MONITORING
3E-8542 CONTROL GP-ENGINE MONITORING
TEMPERATURE/PRESSURE MODULE
PART OF 138-8356 BOX GP-CONTROL, 208-8127 WIRING GP-SHUTOFF
AN ATTACHMENT
ELECTRONICS GP-COMMUNICATION
256-7511 CONTROL GP-COMMUNICATION
256-7511 CONTROL GP-COMMUNICATION -PL1000T
FOR USE WITH @@@@@270-1732@@@@@
AN ATTACHMENT
256-7512 CONTROL GP-COMMUNICATION
256-7512 CONTROL GP-COMMUNICATION -PL1000E
AN ATTACHMENT
426-5362 INSTALLATION GP-COMMUNICATION
426-5362 INSTALLATION GP-COMMUNICATION -PLE601 NETWORK MANAGER
FIELD INSTALLATION
ELECTRONICS GP-GENERATOR SET
CONTROL GP-GENERATOR SET
368-7106 CONTROL GP-GENERATOR SET
368-7106 CONTROL GP-GENERATOR SET
PART OF 418-6662 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT
CONTROL GP-GENERATOR SET
450-9620 CONTROL GP-GENERATOR SET
450-9620 CONTROL GP-GENERATOR SET
HARNESS GP
HARNESS AS-BOX
311-3018 HARNESS AS-BOX
311-3018 HARNESS AS-BOX -EIS, INTERCONNECT
PART OF 204-0331 WIRING GP-ENGINE
AN ATTACHMENT
418-6874 HARNESS AS-BOX
418-6874 HARNESS AS-BOX -CSA
PART OF 418-6875 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
197-3223 HARNESS AS-CONTROL
197-3223 HARNESS AS-CONTROL -AIR FUEL RATIO
AN ATTACHMENT
197-3224 HARNESS AS-CONTROL
197-3224 HARNESS AS-CONTROL -AIR FUEL RATIO
AN ATTACHMENT
198-2791 HARNESS AS-CONTROL
198-2791 HARNESS AS-CONTROL -AIR FUEL RATIO
AN ATTACHMENT
270-1732 HARNESS AS-CONTROL
270-1732 HARNESS AS-CONTROL -PL1000T
FOR USE WITH @@@@@256-7511@@@@@
AN ATTACHMENT
276-0785 HARNESS AS-CONTROL
276-0785 HARNESS AS-CONTROL -PL1000E
AN ATTACHMENT
303-8130 HARNESS AS-CONTROL
303-8130 HARNESS AS-CONTROL -AIR FUEL RATIO
AN ATTACHMENT
308-5688 HARNESS AS-CONTROL
308-5688 HARNESS AS-CONTROL -AIR FUEL RATIO
S/N BAZ2465-UP
FOR USE WITH NSPS
AN ATTACHMENT
360-4226 HARNESS AS-CONTROL
360-4226 HARNESS AS-CONTROL -PRODUCT LINK
PART OF 426-5362 INSTALLATION GP-COMMUNICATION
126-3099 HARNESS AS-PANEL
126-3099 HARNESS AS-PANEL -AC CONNECTIONS
PART OF 119-6031 PANEL GP-CONTROL
AN ATTACHMENT
126-3103 HARNESS AS-PANEL
126-3103 HARNESS AS-PANEL -GOVERNOR
PART OF 119-6031 PANEL GP-CONTROL
AN ATTACHMENT
166-9275 HARNESS AS-PANEL
166-9275 HARNESS AS-PANEL
INTERNAL COMPONENTS, EMCP II
PART OF 119-6031 PANEL GP-CONTROL
AN ATTACHMENT
173-0467 HARNESS AS-PANEL
173-0467 HARNESS AS-PANEL -GENERATOR SET CONTROL
EMCP II
PART OF 119-6031 PANEL GP-CONTROL
AN ATTACHMENT
173-0469 HARNESS AS-PANEL
173-0469 HARNESS AS-PANEL -GENERATOR SET CONTROL
EMCP II
PART OF 119-6031 PANEL GP-CONTROL
AN ATTACHMENT
194-0891 HARNESS AS-PANEL
194-0891 HARNESS AS-PANEL -INTERCONNECT
30-FT. UNBRAIDED
AN ATTACHMENT
194-0892 HARNESS AS-PANEL
194-0892 HARNESS AS-PANEL -INTERCONNECT
30-FT. BRAIDED
AN ATTACHMENT
194-0893 HARNESS AS-PANEL
194-0893 HARNESS AS-PANEL -INTERCONNECT
50-FT. UNBRAIDED
AN ATTACHMENT
194-0894 HARNESS AS-PANEL
194-0894 HARNESS AS-PANEL -INTERCONNECT
50-FT. BRAIDED
AN ATTACHMENT
194-0895 HARNESS AS-PANEL
194-0895 HARNESS AS-PANEL -INTERCONNECT
20-FT. UNBRAIDED
AN ATTACHMENT
194-0896 HARNESS AS-PANEL
194-0896 HARNESS AS-PANEL -INTERCONNECT
20-FT. BRAIDED
AN ATTACHMENT
418-8853 HARNESS AS-PANEL
418-8853 HARNESS AS-PANEL
PART OF 418-6662 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT
130-3592 HARNESS AS-POWER
130-3592 HARNESS AS-POWER -DIGITAL VOLTAGE REGULATOR
FOR USE WITH SWITCHGEAR CONVERSION
AN ATTACHMENT
308-5687 HARNESS AS-SENSOR
308-5687 HARNESS AS-SENSOR -AIR FUEL RATIO CONTROL
S/N BAZ2465-UP
FOR USE WITH NSPS
AN ATTACHMENT
195-8022 HARNESS AS-WIRING
195-8022 HARNESS AS-WIRING -ENGINE SHUTOFF
SHUTOFF WITHOUT STARTING WIRING
PART OF 393-4622 WIRING GP-SHUTOFF
FOR USE WITH EMCP II W/70 PIN DEUTSCH CONNECTOR
AN ATTACHMENT
195-8025 HARNESS AS-WIRING
195-8025 HARNESS AS-WIRING -GOVERNOR
EMCPII, GOVERNOR
PART OF 393-4621 WIRING GP-ENGINE
FOR USE WITH 70 PIN CONNECTOR
AN ATTACHMENT
195-8026 HARNESS AS-WIRING
195-8026 HARNESS AS-WIRING -GOVERNOR ACTUATOR
PRO-ACT, EMCPII
PART OF 195-8033 FASTENER GP-WIRING HARNESS
FOR USE WITH 70 PIN CONNECTOR
AN ATTACHMENT
311-3011 HARNESS AS-WIRING
311-3011 HARNESS AS-WIRING
AIR FUEL RATIO
PART OF 311-3010 WIRING GP-ENGINE
AN ATTACHMENT

Information:

(For parts list, see above)

Operation and Maintenance Manual
Alarms and Shutoffs
G3408C and G3412C Engines
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Alternator - Inspect
G3408C and G3412C Engines
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Technical Information Bulletin
26SI Reman Charging Alternator Group Has Been Discontinued {1405}
26SI Reman Charging Alternator Group Has Been Discontinued {1405}
Specifications
Alternator and Regulator
G3408C and G3412C Engines
Alternator and Regulator
G3408C and G3412C Engines
Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator
N3 Series Brushless Alternators
Alternator and Regulator
G3408C and G3412C Engines
Systems Operation
Charging System
G3408C and G3412C Engines
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Normal Operation
HDB Series and M1 Series Heavy Duty Brushless Alternators
Component Description
HDB Series and M1 Series Heavy Duty Brushless Alternators
General Information
N3 Series Brushless Alternators
Component Description
N3 Series Brushless Alternators
Normal Operation
N3 Series Brushless Alternators
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Charging System
G3408C and G3412C Engines
Field Winding - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Capacitor - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Stator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Rectifier - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Residual Magnetism - Restore
N3 Series Brushless Alternators
Regulator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Field Winding - Test
N3 Series Brushless Alternators
Capacitor - Test
N3 Series Brushless Alternators
Rectifier - Test
N3 Series Brushless Alternators
Stator - Test
N3 Series Brushless Alternators
Regulator - Test
N3 Series Brushless Alternators
Troubleshooting
General Information
N3 Series Brushless Alternators
Charging System
N3 Series Brushless Alternators
Alternator - Malfunction
G3400 Engines (EIS)
Disassembly and Assembly
Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble
N3 Series Brushless Alternators
Alternator - Disassemble
N3 Series Brushless Alternators
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Operation and Maintenance Manual
Battery Electrolyte Level - Check
G3408C and G3412C Engines
Cold Weather Starting
G3408C and G3412C Engines
Battery Charger - Check
G3408C and G3412C Engines
Batteries - Replace
G3408C and G3412C Engines
Starting with Jump Start Cables
G3408C and G3412C Engines
Special Instruction
Battery Test Procedure {1401}
Battery Test Procedure {1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Testing and Adjusting
Battery
G3408C and G3412C Engines
Troubleshooting
MID 014 - CID 0322 - FMI 03 Shutdown Relay short to +batt
G3400 Engines (EIS)
MID 014 - CID 0322 - FMI 05 Shutdown Relay open/short to ground
G3400 Engines (EIS)
MID 014 - CID 0323 - FMI 03 Shutdown Lamp short to +batt
G3400 Engines (EIS)
MID 014 - CID 0323 - FMI 05 Shutdown Lamp open/short to ground
G3400 Engines (EIS)
MID 014 - CID 0324 - FMI 03 Warning Lamp short to +batt
G3400 Engines (EIS)
MID 014 - CID 0324 - FMI 05 Warning Lamp open/short to ground
G3400 Engines (EIS)
MID 014 - CID 0330 - FMI 11 Propane Timing Mode requested
G3400 Engines (EIS)
MID 014 - CID 0331 - FMI 11 Ignition Shutdown requested
G3400 Engines (EIS)
Engine Monitoring System
G3400 Engines (EIS)
Propane Switch
G3400 Engines (EIS)
Shutdown Lamp
G3400 Engines (EIS)
Warning Lamp Circuit - Test
G3400 Engines (EIS)
Shutdown Relay
G3400 Engines (EIS)
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR RETROFITTING EIS CIRCUIT BREAKER ON CERTAIN G3408C AND G3412C GAS ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETROFITTING EIS CIRCUIT BREAKER ON CERTAIN G3408C AND G3412C GAS ENGINES
Service Letter-CSARL
Service Letter-Americas
Systems Operation
Related Components
G3408C and G3412C Engines
Engine News
A Repair Kit for the Air/Fuel Ratio Control is Available {1901}
2008/02/18
Special Instruction
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Technical Information Bulletin
Shutdowns May Occur with NOx Sensor Diagnostic Codes Present on Certain CG137, G3400, G3500, and G3600 Gas Engines {191N, 7432}
Shutdowns May Occur with NOx Sensor Diagnostic Codes Present on Certain CG137, G3400, G3500, and G3600 Gas Engines {191N, 7432}
Disassembly and Assembly
Electronic Control Module (Engine) - Remove and Install
G3408C and G3412C Engines
Service Magazine
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
Corrections To Operation and Maintenance Manual, SEBU6883-03, "G3408C and G3412C Engines" {7450}
2001/09/01
A New Version of Caterpillar Electronic Technician (ET) Better Supports G3400 and G3500 Engines {0599, 1901}
2009/10/20
Software Update For Proper Air Fuel Ratio Controller Operation Of Certain G3408 and G3412 Engines {1901, 1920}
2013/01/21
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New Software Is Now Used for Certain G3400 and G3500 Engines {1901, 1907, 1920}
New Software Is Now Used for Certain G3400 and G3500 Engines {1901, 1907, 1920}
New Operator Control Panel (OCP) 4.3 Software is Now Used for Certain Engines {1920, 7490}
New Operator Control Panel (OCP) 4.3 Software is Now Used for Certain Engines {1920, 7490}
Operation and Maintenance Manual
Engine Protective Devices - Check
G3408C and G3412C Engines
Cold Weather Starting
G3408C and G3412C Engines
Engine Speed Governing
G3408C and G3412C Engines
Gauges and Indicators
G3408C and G3412C Engines
Ignition Systems
G3408C and G3412C Engines
Sensors and Electrical Components
G3408C and G3412C Engines
Special Instruction
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Air/Fuel Controller (AFC) Module Software Update{1901}
Air/Fuel Controller (AFC) Module Software Update{1901}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN G3408, G3408C, AND G3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN G3408, G3408C, AND G3412 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Corrective Action for Speed/Timing Sensor{1901, 1912}
Corrective Action for Speed/Timing Sensor{1901, 1912}
Shutdowns May Occur with NOx Sensor Diagnostic Codes Present on Certain CG137, G3400, G3500, and G3600 Gas Engines {191N, 7432}
Shutdowns May Occur with NOx Sensor Diagnostic Codes Present on Certain CG137, G3400, G3500, and G3600 Gas Engines {191N, 7432}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN G3408, G3408C, AND G3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN G3408, G3408C, AND G3412 ENGINES
Service Letter-Asia
Systems Operation
Electronic Control System Parameters
G3408C and G3412C Engines
Electronic Control System Operation
G3408C and G3412C Engines
Engine Monitoring System
G3408C and G3412C Engines
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN G3408, G3408C, AND G3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN G3408, G3408C, AND G3412 ENGINES
Testing and Adjusting
General Information (Electronic Control System)
G3408C and G3412C Engines
Engine Speed/Timing Sensor
G3408C and G3412C Engines
Troubleshooting
MID 014 - CID 0328 - FMI 02 Number of Cylinders mismatch
G3400 Engines (EIS)
MID 014 - CID 0591 - FMI 12 EEPROM checksum fault or ECM not programmed
G3400 Engines (EIS)
System Overview
G3400 Engines (EIS)
Self-Diagnostics
G3400 Engines (EIS)
Programming Parameters
G3400 Engines (EIS)
Replacing the EIS Control Module
G3400 Engines (EIS)
Diagnostic Codes
G3400 Engines (EIS)
Control Module Self Test
G3400 Engines (EIS)
Ignition Shutdown Circuit
G3400 Engines (EIS)
Programmable Parameters
G3400 Engines (EIS)
Disassembly and Assembly
Electronic Control Module (Engine) - Remove and Install
G3408C and G3412C Engines
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
New Software Is Now Used for Certain G3400 and G3500 Engines {1901, 1907, 1920}
New Software Is Now Used for Certain G3400 and G3500 Engines {1901, 1907, 1920}
Operation and Maintenance Manual
Ignition Systems
G3408C and G3412C Engines
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Engine News
Recommendations for Gas Engine Spark Plugs {1550, 1555}
2007/07/02
New Ignition Transformers are Used {1561}
2004/12/01
A Spring has been Added to the Ignition Transformer on G3400 and G3500 Engines {1550}
2009/06/29
Operation and Maintenance Manual
Ignition System Spark Plugs - Inspect/Replace
G3408C and G3412C Engines
Ignition Systems
G3408C and G3412C Engines
Special Instruction
Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561}
Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561}
Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561}
Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561}
Specifications
Gas Engine Ignition
G3408C and G3412C Engines
Ignition Transformer
G3408C and G3412C Engines
Gas Engine Ignition
G3408C and G3412C Engines
Gas Engine Ignition
G3408C and G3412C Engines
Systems Operation
Ignition System
G3408C and G3412C Engines
Troubleshooting
MID 014 - CID 0301 - FMI 05 Ignition Transformer Primary #1 open circuit
G3400 Engines (EIS)
MID 014 - CID 0301 - FMI 06 Ignition Transformer Primary #1 short
G3400 Engines (EIS)
MID 014 - CID 0301 - FMI 12 Ignition Transformer Primary #1 short to return
G3400 Engines (EIS)
MID 014 - CID 0302 - FMI 05 Ignition Transformer Primary #2 open circuit
G3400 Engines (EIS)
MID 014 - CID 0302 - FMI 06 Ignition Transformer Primary #2 short
G3400 Engines (EIS)
MID 014 - CID 0302 - FMI 12 Ignition Transformer Primary #2 short to return
G3400 Engines (EIS)
MID 014 - CID 0303 - FMI 05 Ignition Transformer Primary #3 open circuit
G3400 Engines (EIS)
MID 014 - CID 0303 - FMI 06 Ignition Transformer Primary #3 short
G3400 Engines (EIS)
MID 014 - CID 0303 - FMI 12 Ignition Transformer Primary #3 short to return
G3400 Engines (EIS)
MID 014 - CID 0304 - FMI 05 Ignition Transformer Primary #4 open circuit
G3400 Engines (EIS)
MID 014 - CID 0304 - FMI 06 Ignition Transformer Primary #4 short
G3400 Engines (EIS)
MID 014 - CID 0304 - FMI 12 Ignition Transformer Primary #4 short to return
G3400 Engines (EIS)
MID 014 - CID 0305 - FMI 05 Ignition Transformer Primary #5 open circuit
G3400 Engines (EIS)
MID 014 - CID 0305 - FMI 06 Ignition Transformer Primary #5 short
G3400 Engines (EIS)
MID 014 - CID 0305 - FMI 12 Ignition Transformer Primary #5 short to return
G3400 Engines (EIS)
MID 014 - CID 0306 - FMI 05 Ignition Transformer Primary #6 open circuit
G3400 Engines (EIS)
MID 014 - CID 0306 - FMI 12 Ignition Transformer Primary #6 short to return
G3400 Engines (EIS)
MID 014 - CID 0306 - FMI 06 Ignition Transformer Primary #6 short
G3400 Engines (EIS)
MID 014 - CID 0307 - FMI 05 Ignition Transformer Primary #7 open circuit
G3400 Engines (EIS)
MID 014 - CID 0307 - FMI 06 Ignition Transformer Primary #7 short
G3400 Engines (EIS)
MID 014 - CID 0307 - FMI 12 Ignition Transformer Primary #7 short to return
G3400 Engines (EIS)
MID 014 - CID 0308 - FMI 05 Ignition Transformer Primary #8 open circuit
G3400 Engines (EIS)
MID 014 - CID 0308 - FMI 06 Ignition Transformer Primary #8 short
G3400 Engines (EIS)
MID 014 - CID 0308 - FMI 12 Ignition Transformer Primary #8 short to return
G3400 Engines (EIS)
MID 014 - CID 0309 - FMI 05 Ignition Transformer Primary #9 open circuit
G3400 Engines (EIS)
MID 014 - CID 0309 - FMI 06 Ignition Transformer Primary #9 short
G3400 Engines (EIS)
MID 014 - CID 0309 - FMI 12 Ignition Transformer Primary #9 short to return
G3400 Engines (EIS)
MID 014 - CID 0310 - FMI 05 Ignition Transformer Primary #10 open circuit
G3400 Engines (EIS)
MID 014 - CID 0310 - FMI 06 Ignition Transformer Primary #10 short
G3400 Engines (EIS)
MID 014 - CID 0310 - FMI 12 Ignition Transformer Primary #10 short to return
G3400 Engines (EIS)
MID 014 - CID 0311 - FMI 05 Ignition Transformer Primary #11 open circuit
G3400 Engines (EIS)
MID 014 - CID 0311 - FMI 06 Ignition Transformer Primary #11 short
G3400 Engines (EIS)
MID 014 - CID 0311 - FMI 12 Ignition Transformer Primary #11 short to return
G3400 Engines (EIS)
MID 014 - CID 0312 - FMI 05 Ignition Transformer Primary #12 open circuit
G3400 Engines (EIS)
MID 014 - CID 0312 - FMI 06 Ignition Transformer Primary #12 short
G3400 Engines (EIS)
MID 014 - CID 0312 - FMI 12 Ignition Transformer Primary #12 short to return
G3400 Engines (EIS)
MID 014 - CID 0401 - FMI 00 Ignition Transformer Secondary #1 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0401 - FMI 05 Ignition Transformer Secondary #1 open circuit
G3400 Engines (EIS)
MID 014 - CID 0401 - FMI 06 Ignition Transformer Secondary #1 short to ground
G3400 Engines (EIS)
MID 014 - CID 0401 - FMI 12 Ignition Transformer Secondary #1 noisy component
G3400 Engines (EIS)
MID 014 - CID 0402 - FMI 00 Ignition Transformer Secondary #2 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0402 - FMI 05 Ignition Transformer Secondary #2 open circuit
G3400 Engines (EIS)
MID 014 - CID 0402 - FMI 06 Ignition Transformer Secondary #2 short to ground
G3400 Engines (EIS)
MID 014 - CID 0402 - FMI 12 Ignition Transformer Secondary #2 noisy component
G3400 Engines (EIS)
MID 014 - CID 0403 - FMI 00 Ignition Transformer Secondary #3 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0403 - FMI 05 Ignition Transformer Secondary #3 open circuit
G3400 Engines (EIS)
MID 014 - CID 0403 - FMI 06 Ignition Transformer Secondary #3 short to ground
G3400 Engines (EIS)
MID 014 - CID 0403 - FMI 12 Ignition Transformer Secondary #3 noisy component
G3400 Engines (EIS)
MID 014 - CID 0404 - FMI 00 Ignition Transformer Secondary #4 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0404 - FMI 05 Ignition Transformer Secondary #4 open circuit
G3400 Engines (EIS)
MID 014 - CID 0404 - FMI 06 Ignition Transformer Secondary #4 short to ground
G3400 Engines (EIS)
MID 014 - CID 0404 - FMI 12 Ignition Transformer Secondary #4 noisy component
G3400 Engines (EIS)
MID 014 - CID 0405 - FMI 00 Ignition Transformer Secondary #5 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0405 - FMI 05 Ignition Transformer Secondary #5 open circuit
G3400 Engines (EIS)
MID 014 - CID 0405 - FMI 06 Ignition Transformer Secondary #5 short to ground
G3400 Engines (EIS)
MID 014 - CID 0405 - FMI 12 Ignition Transformer Secondary #5 noisy component
G3400 Engines (EIS)
MID 014 - CID 0406 - FMI 00 Ignition Transformer Secondary #6 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0406 - FMI 05 Ignition Transformer Secondary #6 open circuit
G3400 Engines (EIS)
MID 014 - CID 0406 - FMI 06 Ignition Transformer Secondary #6 short to ground
G3400 Engines (EIS)
MID 014 - CID 0406 - FMI 12 Ignition Transformer Secondary #6 noisy component
G3400 Engines (EIS)
MID 014 - CID 0407 - FMI 00 Ignition Transformer Secondary #7 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0407 - FMI 05 Ignition Transformer Secondary #7 open circuit
G3400 Engines (EIS)
MID 014 - CID 0407 - FMI 06 Ignition Transformer Secondary #7 short to ground
G3400 Engines (EIS)
MID 014 - CID 0407 - FMI 12 Ignition Transformer Secondary #7 noisy component
G3400 Engines (EIS)
MID 014 - CID 0408 - FMI 00 Ignition Transformer Secondary #8 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0408 - FMI 05 Ignition Transformer Secondary #8 open circuit
G3400 Engines (EIS)
MID 014 - CID 0408 - FMI 06 Ignition Transformer Secondary #8 short to ground
G3400 Engines (EIS)
MID 014 - CID 0408 - FMI 12 Ignition Transformer Secondary #8 noisy component
G3400 Engines (EIS)
MID 014 - CID 0409 - FMI 00 Ignition Transformer Secondary #9 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0409 - FMI 05 Ignition Transformer Secondary #9 open circuit
G3400 Engines (EIS)
MID 014 - CID 0409 - FMI 06 Ignition Transformer Secondary #9 short to ground
G3400 Engines (EIS)
MID 014 - CID 0409 - FMI 12 Ignition Transformer Secondary #9 noisy component
G3400 Engines (EIS)
MID 014 - CID 0410 - FMI 00 Ignition Transformer Secondary #10 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0410 - FMI 05 Ignition Transformer Secondary #10 open circuit
G3400 Engines (EIS)
MID 014 - CID 0410 - FMI 06 Ignition Transformer Secondary #10 short to ground
G3400 Engines (EIS)
MID 014 - CID 0410 - FMI 12 Ignition Transformer Secondary #10 noisy component
G3400 Engines (EIS)
MID 014 - CID 0411 - FMI 00 Ignition Transformer Secondary #11 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0411 - FMI 05 Ignition Transformer Secondary #11 open circuit
G3400 Engines (EIS)
MID 014 - CID 0411 - FMI 06 Ignition Transformer Secondary #11 short to ground
G3400 Engines (EIS)
MID 014 - CID 0411 - FMI 12 Ignition Transformer Secondary #11 noisy component
G3400 Engines (EIS)
MID 014 - CID 0412 - FMI 00 Ignition Transformer Secondary #12 maintenance needed
G3400 Engines (EIS)
MID 014 - CID 0412 - FMI 05 Ignition Transformer Secondary #12 open circuit
G3400 Engines (EIS)
MID 014 - CID 0412 - FMI 06 Ignition Transformer Secondary #12 short to ground
G3400 Engines (EIS)
MID 014 - CID 0412 - FMI 12 Ignition Transformer Secondary #12 noisy component
G3400 Engines (EIS)
Ignition Transformers Primary Circuit
G3400 Engines (EIS)
Ignition Transformers Secondary Circuit and Spark Plugs
G3400 Engines (EIS)
Service Magazine
Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/04/01
Engine News
New Spark Plugs Are Available {1555}
2001/01/01
Caterpillar No Longer Recommends The Use Of 195-6071 Spark Plugs Or 195-6353 Spark Plugs On G3300 Engines Or G3400 Engines {1555}
2001/09/01
Improved Spark Plug Adapters Help Prevent Seizures of the Spark Plugs {1555}
2005/08/15
A Spring has been Added to the Ignition Transformer on G3400 and G3500 Engines {1550}
2009/06/29
Operation and Maintenance Manual
Ignition System Transformer Resistance - Test
G3408C and G3412C Engines
Carburetor Air/Fuel Ratio - Check/Adjust
G3408C and G3412C Engines
Ignition System Timing - Check/Adjust
G3408C and G3412C Engines
Special Instruction
Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561}
Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561}
Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561}
Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561}
Specifications
Gas Solenoid Valve
G3408C and G3412C Engines
Testing and Adjusting
Ignition System
G3408C and G3412C Engines
Troubleshooting
Short Spark Plug Life
G3400 Engines (EIS)
Disassembly and Assembly
Transformer - Remove and Install
G3408C and G3412C Engines
Spark Plugs - Remove and Install
G3408C and G3412C Engines
Spark Plug Adapter - Remove and Install
G3408C and G3412C Engines
Operation and Maintenance Manual
Engine Protective Devices - Check
G3408C and G3412C Engines
Starting Motor - Inspect
G3408C and G3412C Engines
Starting the Engine
G3408C and G3412C Engines
Systems Operation
Air Starting System Operation
G3408C and G3412C Engines
Grounding Practices
G3408C and G3412C Engines
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Technical Information Bulletin
VR6 Or K65-12B Voltage Regulators Require An External Jumper Wire When Used With A Permanent Magnet Generator{4467}
VR6 Or K65-12B Voltage Regulators Require An External Jumper Wire When Used With A Permanent Magnet Generator{4467}
Specifications
Coolant Temperature Sensor
G3408C and G3412C Engines
Engine News
Special Instruction, REHS3411, "Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp " Is Available {191N}
2009/04/06
Special Instruction, REHS7131 , "Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE)" Is Available {1408, 1439, 191N, 7400}
2012/01/16
New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N}
New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N}
Operation and Maintenance Manual
Engine Protective Devices - Check
G3408C and G3412C Engines
Speed Sensor - Clean/Inspect
G3408C and G3412C Engines
Sensors and Electrical Components
G3408C and G3412C Engines
Engine Speed/Timing Sensor - Clean/Inspect
G3408C and G3412C Engines
Special Instruction
Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp {191N}
Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp {191N}
Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE){191N}
Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE){191N}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Technical Information Bulletin
Corrective Action for Speed/Timing Sensor{1901, 1912}
Corrective Action for Speed/Timing Sensor{1901, 1912}
Specifications
Engine Speed/Timing Sensor
G3408C and G3412C Engines
Engine Detonation Sensor
G3408C and G3412C Engines
Pressure Sensor - Oil Pressure
G3408C and G3412C Engines
Pressure Sensor
G3408C and G3412C Engines
Engine Speed Sensor
G3408C and G3412C Engines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Related Components
G3408C and G3412C Engines
Nitrogen Oxide Sensor Calibration
Air/Fuel Ratio Control
Testing and Adjusting
Manifold Air Pressure Sensor
G3408C and G3412C Engines
Detonation Sensor
G3408C and G3412C Engines
Measuring Inlet Manifold Temperature
G3408C and G3412C Engines
Troubleshooting
MID 014 - CID 0317 - FMI 08 Load Sensor (MAPS) signal abnormal
G3400 Engines (EIS)
MID 014 - CID 0317 - FMI 11 No Inlet Manifold Pressure signal
G3400 Engines (EIS)
MID 014 - CID 0318 - FMI 01 Loss of Right Bank Detonation Sensor Signal
G3400 Engines (EIS)
MID 014 - CID 0318 - FMI 03 Right Bank Detonation Sensor short to +batt
G3400 Engines (EIS)
MID 014 - CID 0318 - FMI 05 Right Bank Detonation Sensor open or short to ground
G3400 Engines (EIS)
MID 014 - CID 0319 - FMI 01 Loss of Left Bank Detonation Sensor Signal
G3400 Engines (EIS)
MID 014 - CID 0319 - FMI 03 Left Bank Detonation Sensor short to +batt
G3400 Engines (EIS)
MID 014 - CID 0319 - FMI 05 Left Bank Detonation Sensor open or short to ground
G3400 Engines (EIS)
MID 014 - CID 0320 - FMI 05 Timing Control Speed Sensor open/short to +batt
G3400 Engines (EIS)
MID 014 - CID 0320 - FMI 07 Speed/Timing Sensor improper response
G3400 Engines (EIS)
MID 014 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal
G3400 Engines (EIS)
MID 014 - CID 0325 - FMI 00 Excessive Detonation
G3400 Engines (EIS)
MID 014 - CID 0326 - FMI 01 Detonation Retarded Timing
G3400 Engines (EIS)
MID 014 - CID 0327 - FMI 02 Number of Detonation Sensors mismatch
G3400 Engines (EIS)
Engine Speed/Timing Sensor - Calibrate
G3400 Engines (EIS)
Detonation Sensors
G3400 Engines (EIS)
Engine Speed/Timing Sensor
G3400 Engines (EIS)
Detonation Retard and Detonation Shutdown
G3400 Engines (EIS)
Operation and Maintenance Manual
Manual Stop Procedure
G3408C and G3412C Engines
Alarms and Shutoffs
G3408C and G3412C Engines
Emergency Stopping
G3408C and G3412C Engines
Engine News
Special Instruction, REHS4718-00, "Proper Installation of the Gas Shutoff Valve (GSOV)" Is Available {5479}
2009/03/02
Special Instruction
Proper Installation of the Gas Shutoff Valve (GSOV){5479}
Proper Installation of the Gas Shutoff Valve (GSOV){5479}
Systems Operation
Starting System
G3408C and G3412C Engines
Operation and Maintenance Manual
Automatic Start/Stop - Inspect - Generator Set
G3408C and G3412C Engines
Cold Weather Starting
G3408C and G3412C Engines
Air Tank Moisture and Sediment - Drain
G3408C and G3412C Engines
Cold Weather Starting
G3408C and G3412C Engines
Starting Motor - Inspect
G3408C and G3412C Engines
Starting the Engine
G3408C and G3412C Engines
Special Instruction
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
G3408C and G3412C Engines
Air Starting Motor Pressure Regulating Valve
G3408C and G3412C Engines
Air Starting Motor
G3408C and G3412C Engines
Systems Operation
Air Starting System Operation
G3408C and G3412C Engines
Starting System
G3408C and G3412C Engines
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Pressure Regulating Valve
G3408C and G3412C Engines
Troubleshooting
Air Starting Motor - Malfunction
G3400 Engines (EIS)
Disassembly and Assembly
Air Starting Motor - Remove and Install
G3408C and G3412C Engines
Operation and Maintenance Manual
Sensors and Electrical Components
G3408C and G3412C Engines
Specifications
Magnetic Switch
G3408C and G3412C Engines
Coolant Temperature Switch
G3408C and G3412C Engines
Operation and Maintenance Manual
Air Tank Moisture and Sediment - Drain
G3408C and G3412C Engines
Engine News
Caterpillar Electronic Technician (ET) Software Is Now Available For G3400 Engines And G3500 Engines That Are Equipped With An Electronic Ignition System (EIS) Or Air/Fuel Ratio Controls {0785}
2002/03/01
Tool Operating Manual
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Testing and Adjusting
Test Tools for the Electrical System
G3408C and G3412C Engines
Troubleshooting
Service Tools
N3 Series Brushless Alternators
Electronic Service Tool Displays UNDETERMINED
G3400 Engines (EIS)
Electronic Service Tools
G3400 Engines (EIS)
Customer Parameters Worksheet
G3400 Engines (EIS)
Troubleshooting Data Sheet
G3400 Engines (EIS)
Diagnostic Code Will Not Clear
G3400 Engines (EIS)
Electronic Service Tool Will Not Communicate with ECM
G3400 Engines (EIS)
Service Magazine
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/04/01
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
New Ignition Transformers are Used {1561}
2005/06/06
Special Instruction
Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561}
Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561}
Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561}
Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561}
Specifications
Ignition Transformer
G3408C and G3412C Engines
Testing and Adjusting
Ignition Transformer
G3408C and G3412C Engines
Engine News
Special Instruction, REHS4718-00, "Proper Installation of the Gas Shutoff Valve (GSOV)" Is Available {5479}
2009/03/02
Special Instruction
Proper Installation of the Gas Shutoff Valve (GSOV){5479}
Proper Installation of the Gas Shutoff Valve (GSOV){5479}
Specifications
Gas Solenoid Valve
G3408C and G3412C Engines
Testing and Adjusting
Pressure Regulating Valve
G3408C and G3412C Engines
Engine News
Special Instruction, REHS7131 , "Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE)" Is Available {1408, 1439, 191N, 7400}
2012/01/16
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Schematic
Schematics &amp; Wiring Diagrams
ELECTRONIC MODULAR CONTROL PANEL II (EMCP II)
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Testing and Adjusting
Manifold Air Pressure Sensor
G3408C and G3412C Engines
Detonation Sensor
G3408C and G3412C Engines
Engine Speed/Timing Sensor
G3408C and G3412C Engines
Troubleshooting
MID 014 - CID 0168 - FMI 02 System Voltage intermittent/erratic
G3400 Engines (EIS)
MID 014 - CID 0300 - FMI 03 Primary Return short to +batt
G3400 Engines (EIS)
MID 014 - CID 0300 - FMI 04 Primary Return short to ground
G3400 Engines (EIS)
MID 014 - CID 0317 - FMI 08 Load Sensor (MAPS) signal abnormal
G3400 Engines (EIS)
MID 014 - CID 0317 - FMI 11 No Inlet Manifold Pressure signal
G3400 Engines (EIS)
MID 014 - CID 0318 - FMI 01 Loss of Right Bank Detonation Sensor Signal
G3400 Engines (EIS)
MID 014 - CID 0318 - FMI 03 Right Bank Detonation Sensor short to +batt
G3400 Engines (EIS)
MID 014 - CID 0318 - FMI 05 Right Bank Detonation Sensor open or short to ground
G3400 Engines (EIS)
MID 014 - CID 0319 - FMI 01 Loss of Left Bank Detonation Sensor Signal
G3400 Engines (EIS)
MID 014 - CID 0319 - FMI 03 Left Bank Detonation Sensor short to +batt
G3400 Engines (EIS)
MID 014 - CID 0319 - FMI 05 Left Bank Detonation Sensor open or short to ground
G3400 Engines (EIS)
MID 014 - CID 0320 - FMI 05 Timing Control Speed Sensor open/short to +batt
G3400 Engines (EIS)
MID 014 - CID 0320 - FMI 07 Speed/Timing Sensor improper response
G3400 Engines (EIS)
MID 014 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal
G3400 Engines (EIS)
MID 014 - CID 0322 - FMI 03 Shutdown Relay short to +batt
G3400 Engines (EIS)
MID 014 - CID 0322 - FMI 05 Shutdown Relay open/short to ground
G3400 Engines (EIS)
MID 014 - CID 0323 - FMI 03 Shutdown Lamp short to +batt
G3400 Engines (EIS)
MID 014 - CID 0323 - FMI 05 Shutdown Lamp open/short to ground
G3400 Engines (EIS)
MID 014 - CID 0324 - FMI 03 Warning Lamp short to +batt
G3400 Engines (EIS)
MID 014 - CID 0324 - FMI 05 Warning Lamp open/short to ground
G3400 Engines (EIS)
MID 014 - CID 0325 - FMI 00 Excessive Detonation
G3400 Engines (EIS)
MID 014 - CID 0326 - FMI 01 Detonation Retarded Timing
G3400 Engines (EIS)
MID 014 - CID 0327 - FMI 02 Number of Detonation Sensors mismatch
G3400 Engines (EIS)
MID 014 - CID 0330 - FMI 11 Propane Timing Mode requested
G3400 Engines (EIS)
MID 014 - CID 0331 - FMI 11 Ignition Shutdown requested
G3400 Engines (EIS)
Engine Speed/Timing Sensor - Calibrate
G3400 Engines (EIS)
Electrical Power Supply
G3400 Engines (EIS)
Propane Switch
G3400 Engines (EIS)
Shutdown Lamp
G3400 Engines (EIS)
Warning Lamp Circuit - Test
G3400 Engines (EIS)
Detonation Sensors
G3400 Engines (EIS)
Inlet Manifold Pressure Sensor
G3400 Engines (EIS)
Engine Speed/Timing Sensor
G3400 Engines (EIS)
Detonation Retard and Detonation Shutdown
G3400 Engines (EIS)
Inspecting Electrical Connectors
G3400 Engines (EIS)
Electrical Connectors and Functions
G3400 Engines (EIS)
Shutdown Relay
G3400 Engines (EIS)
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New Operator Control Panel (OCP) 4.3 Software is Now Used for Certain Engines {1920, 7490}
New Operator Control Panel (OCP) 4.3 Software is Now Used for Certain Engines {1920, 7490}
Special Instruction
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/22
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Engine News
A New Thermostat for the Jacket Water Heater {1383}
2006/09/11
Operation and Maintenance Manual
Cold Weather Starting
G3408C and G3412C Engines
Jacket Water Heater - Check
G3408C and G3412C Engines
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Special Instruction
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/07/14
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/22
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Engine News
New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620}
New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Engine News
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
Special Instruction
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.