BASIC ENGINE
PULLEY GPDRIVE GP-FAN
BASIC ENGINE
PULLEY GP
#SEBP33852090
122-8931: PULLEY GP-CRANKSHAFT
122-8931 PULLEY GP-CRANKSHAFT
S/N 9SZ1-13566
FOR USE WITH @@@@@156-9646@@@@@, @@@@@148-7229@@@@@, @@@@@158-4643@@@@@, 8 GROOVE POLY-V OR V-GROOVE ACCESSORY DRIVE PULLEY
CANNOT BE USED WITH SHORT FRONT END
ALSO AN ATTACHMENT
S/N 9SZ1-13566
FOR USE WITH @@@@@156-9646@@@@@, @@@@@148-7229@@@@@, @@@@@158-4643@@@@@, 8 GROOVE POLY-V OR V-GROOVE ACCESSORY DRIVE PULLEY
CANNOT BE USED WITH SHORT FRONT END
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS#SEBP33852091
200-2269: PULLEY GP-CRANKSHAFT
200-2269 PULLEY GP-CRANKSHAFT
S/N 9SZ9358-UP
198 DIA SHORT FRONT CRANK PULLEY
FOR USE WITH @@@@@200-2270@@@@@, POLY-VEE DRIVEN
ALSO AN ATTACHMENT
S/N 9SZ9358-UP
198 DIA SHORT FRONT CRANK PULLEY
FOR USE WITH @@@@@200-2270@@@@@, POLY-VEE DRIVEN
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS#SEBP33852092
206-2044: PULLEY GP-CRANKSHAFT
206-2044 PULLEY GP-CRANKSHAFT
S/N 9SZ15604-UP
182.5 DIA SHORT FRONT CRANK
FOR USE WITH @@@@@200-2270@@@@@, POLY-V DRIVEN WATER PUMPS, RUBBER AND VISCOUS DAMPERS
S/N 9SZ15604-UP
182.5 DIA SHORT FRONT CRANK
FOR USE WITH @@@@@200-2270@@@@@, POLY-V DRIVEN WATER PUMPS, RUBBER AND VISCOUS DAMPERS
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS#SEBP33852093
130-5871: PULLEY GP-ENGINE
130-5871 PULLEY GP-ENGINE
S/N 9SZ1-15157
FOR USE WITH @@@@@152-5013@@@@@, @@@@@111-7242@@@@@, @@@@@111-7245@@@@@, @@@@@110-4390@@@@@, SHORT FRONT END
CANNOT BE USED WITH CUSTOMER SUPPLIED 8 GROOVE REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT
S/N 9SZ1-15157
FOR USE WITH @@@@@152-5013@@@@@, @@@@@111-7242@@@@@, @@@@@111-7245@@@@@, @@@@@110-4390@@@@@, SHORT FRONT END
CANNOT BE USED WITH CUSTOMER SUPPLIED 8 GROOVE REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-8237 | [1] | SUPPORT-COMPRESSOR | |
| 2. | 6V-5218 M | [4] | BOLT (M8X1.25X35-MM) | |
| 3. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 6V-4249 M | [2] | BOLT (M10X1.5X50-MM) | |
| 5. | 2Y-5829 M | [3] | NUT (M10X1.5-THD) | |
| 6. | 6V-5839 | [6] | WASHER (11X21X2.5-MM THK) | |
| 7. | 7E-3443 | [1] | BUSHING-TERMINAL | |
| 8. | 6V-5230 M | [1] | BOLT (M10X1.5X60-MM) | |
| 9. | 7W-3872 | [2] | SLEEVE | |
| 10. | 175-3225 | [1] | BRACKET-PULLEY | |
| 11. | 175-3223 Y | [1] | PULLEY GP-IDLER | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33852094
121-9697: PULLEY GP-FAN
121-9697 PULLEY GP-FAN -DRIVE
PROVIDES VARIABLE POSITION FAN DRIVE WITH 1.29:1 RATIO
AN ATTACHMENT
PROVIDES VARIABLE POSITION FAN DRIVE WITH 1.29:1 RATIO
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-7238 | [1] | PLATE (THRUST) | |
| 2. | 190-3956 | [1] | PULLEY (8-GROOVE) | |
| 3. | 190-3968 | [1] | SHAFT-FAN | |
| 4. | 200-2282 | [1] | BEARING AS | |
| 5. | 226-7914 | [1] | BRACKET (FAN BEARING) | |
| 6. | 228-5827 | [1] | RETAINER-BEARING | |
| 7. | 5C-7423 M | [4] | SCREW (M6X1X16-MM) | |
| 8. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 9. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 10. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP33852095
213-1651: PULLEY GP-FAN
213-1651 PULLEY GP-FAN
MULTI-POSITION 158.7 DIAMETER FAN PULLEY WITH 1.25 INCH BY 16 LEFT HAND THREADED SHAFT
FOR USE WITH @@@@@211-7845@@@@@, CUSTOMER SUPPLIED 8 GROOVE POLY VEE BELT AND FAN OR FAN ADAPTER
AN ATTACHMENT
MULTI-POSITION 158.7 DIAMETER FAN PULLEY WITH 1.25 INCH BY 16 LEFT HAND THREADED SHAFT
FOR USE WITH @@@@@211-7845@@@@@, CUSTOMER SUPPLIED 8 GROOVE POLY VEE BELT AND FAN OR FAN ADAPTER
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 100-4026 | [1] | RETAINER-BEARING | |
| 2. | 111-7238 | [1] | PLATE (THRUST) | |
| 3. | 189-9154 | [1] | PULLEY (8-GROOVE) | |
| 4. | 200-2281 | [1] | BRACKET | |
| 5. | 200-2282 | [1] | BEARING AS | |
| 6. | 213-1650 | [1] | SHAFT AS | |
| 7. | 5M-6509 | [1] | SEAL-O-RING | |
| 8. | 5W-8591 M | [4] | BOLT (M8X1.25X18-MM) | |
| 9. | 6V-3940 M | [3] | BOLT (M8X1.25X25-MM) | |
| 10. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP33852096
142-8575: PULLEY GP-FAN & ALT DRIVE
142-8575 PULLEY GP-FAN & ALT DRIVE
1.15:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
ALSO AN ATTACHMENT
1.15:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (FAN AND ALTERNATOR DRIVE) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 125-3723 | [1] | PULLEY-FAN (8-GROOVE) | |
| 10. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 123-0856 | [1] | SHAFT-FAN | |
| M | METRIC PART | |||
#SEBP33852097
142-8575: PULLEY GP-FAN & ALT DRIVE
142-8575 PULLEY GP-FAN & ALT DRIVE
S/N 9SZ8142-8142; 9SZ8144-8144; 9SZ8152-8153; 9SZ8177-13996
1.15:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
ALSO AN ATTACHMENT
S/N 9SZ8142-8142; 9SZ8144-8144; 9SZ8152-8153; 9SZ8177-13996
1.15:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (FAN AND ALTERNATOR DRIVE) | |
| 2. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 3. | 100-4026 | [1] | RETAINER-BEARING | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 6. | 189-9154 C | [1] | PULLEY (8-GROOVE) | |
| 7. | 190-3968 C | [1] | SHAFT-FAN | |
| 8. | 5C-7423 CM | [4] | SCREW (M6X1X16-MM) | |
| 9. | 5M-6509 | [1] | SEAL-O-RING | |
| 10. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 11. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 12. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP33852098
142-8575: PULLEY GP-FAN & ALT DRIVE
142-8575 PULLEY GP-FAN & ALT DRIVE
S/N 9SZ13997-15977
1.15:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
ALSO AN ATTACHMENT
S/N 9SZ13997-15977
1.15:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-7238 | [1] | PLATE (THRUST) | |
| 2. | 189-9154 | [1] | PULLEY (8-GROOVE) | |
| 3. | 190-3968 | [1] | SHAFT-FAN | |
| 4. | 307-9798 | [1] | BEARING AS | |
| 5. | 226-7914 C | [1] | BRACKET (FAN BEARING) | |
| 6. | 228-5827 C | [1] | RETAINER-BEARING | |
| 7. | 5C-7423 M | [4] | SCREW (M6X1X16-MM) | |
| 8. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 9. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 10. | 9M-1974 C | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP33852099
143-7020: PULLEY GP-FAN & ALT DRIVE
143-7020 PULLEY GP-FAN & ALT DRIVE
S/N 9SZ1-8176
1.15:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH @@@@@142-7107@@@@@, 8 GROOVE FAN AND FAN CLUTCH AND MOUNTING
ALSO AN ATTACHMENT
S/N 9SZ1-8176
1.15:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH @@@@@142-7107@@@@@, 8 GROOVE FAN AND FAN CLUTCH AND MOUNTING
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 125-3723 | [1] | PULLEY-FAN (8-GROOVE) | |
| 10. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 128-2330 | [1] | SHAFT AS-FAN | |
| M | METRIC PART | |||
Information:
BASIC ENGINE
PULLEY GP
Operation and Maintenance Manual
Specifications
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
