340-5466 WIRING GP-ALTERNATOR S/N CRN1-UP 60-AMPERE FOR USE WITH ENGINES WIHT AIR START AND 60-AMPERE ALTERNATOR AN ATTACHMENT G3512

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 340-5466 WIRING GP-
1. 340-9217 WIRING GP-
2. 340-9218 WIRING GP-
3. 109-3033 WIRING GP-
4. 113-3381 WIRING GP-
5. 113-3381 WIRING GP-
6. 113-3381 WIRING GP-
7. 175-7731 WIRING GP-
8. 4P-9896 WIRING GP-

STARTING MOTOR GP

9. 166-8367 WIRING GP-
0. INFORMATION

GENERATOR SET G3512 GENERATOR SET CRN
G3512 Generator Set CRN00001-UP SEBP3394 G3512 CRN (2000)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

327-8593 WIRING GP-ALTERNATOR

340-5463 WIRING GP-ALTERNATOR

340-5466 WIRING GP-ALTERNATOR

340-9217 WIRING GP-ALTERNATOR

340-9218 WIRING GP-ALTERNATOR

109-3033 WIRING GP-EIS

#SEBP33940900

340-5466: WIRING GP-ALTERNATOR

WIRING GP-ALTERNATOR

340-5466 WIRING GP-ALTERNATOR
S/N CRN1-UP
60-AMPERE
FOR USE WITH ENGINES WIHT AIR START AND 60-AMPERE ALTERNATOR
AN ATTACHMENT

i03996542 SEBP3394

3405466 WIRING GP-ALTERNATOR Parts scheme

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7H-3937	[1]	LOCKWASHER
2.	8L-8413	[2]	STRAP-CABLE (WHITE)
3.	9X-6772	[18]	STRAP-CABLE
4.	126-9187	[1]	MOUNT-FLEXIBLE
5.	340-9218 Y	[1]	WIRING GP-ALTERNATOR
6.	3B-4505	[1]	LOCKWASHER
7.	3E-9860	[1]	LOCKNUT (5/16-18-THD)
8.	5S-0003	[1]	NUT (5/16-18-THD)
9.	6T-3645	[1]	CIRCUIT BREAKER GP (60-AMPERE)
	6V-8378	[2]	NUT (10-32-THD)
	8F-1434	[2]	LOCKWASHER
	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
10.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
11.	9X-8486	[2]	SCREW-MACHINE (8-32X0.75-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP33940901

340-9217: WIRING GP-ALTERNATOR

WIRING GP-ALTERNATOR

340-9217 WIRING GP-ALTERNATOR
S/N CRN1-UP
35-AMPERE
PART OF 340-5463 WIRING GP-ALTERNATOR
AN ATTACHMENT

i03996538 SEBP3394

3409217 WIRING GP-ALTERNATOR Parts scheme

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	340-5464	[1]	HARNESS AS-POWER
	121-1110	[2]	BOOT (BLACK)
	8T-8827	[2]	BOOT (RED)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
	8T-8737	[2]	PLUG-SEAL
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	114-8843 E		SLEEVE-PLASTIC (60-CM)
	8L-8413	[2]	STRAP-CABLE (WHITE)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	131-1487	[3]	TERMINAL AS (6-GA TO 8-GA)
			(EACH INCLUDES)
	2L-8049	[1]	TERMINAL-RING (6-GA, NO. 10 SCREW)
			-OR-
	2L-8057	[1]	TERMINAL-RING (8-GA, NO. 10 SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1488	[1]	TERMINAL AS-RING (6-GA TO 8-GA)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1489	[2]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	2L-8051	[1]	TERMINAL-RING (6-GA, 5/16-IN SCREW)
			-OR-
	5P-3455	[1]	TERMINAL-RING (8-GA, 5/16-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1490	[2]	TERMINAL AS (6-GA TO 8-GA)
			(EACH INCLUDES)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	119-3662 E	[4]	TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1501	[2]	TERMINAL AS (14-GA TO 16-GA)
			(EACH INCLUDES)
	2L-8074	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM)
2.	350-9452 Y	[1]	CONNECTION GP-ELECTRICAL
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP33940902

340-9218: WIRING GP-ALTERNATOR

WIRING GP-ALTERNATOR

340-9218 WIRING GP-ALTERNATOR
S/N CRN1-UP
60-AMPERE
PART OF 340-5466 WIRING GP-ALTERNATOR
AN ATTACHMENT

i03996547 SEBP3394

3409218 WIRING GP-ALTERNATOR Parts scheme

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	340-5465	[1]	HARNESS AS-POWER
	121-1110	[2]	BOOT (BLACK)
	8T-8827	[2]	BOOT (RED)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
	8T-8737	[2]	PLUG-SEAL
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	114-8843 E		SLEEVE-PLASTIC (60-CM)
	8L-8413	[2]	STRAP-CABLE (WHITE)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	131-1487	[2]	TERMINAL AS (6-GA TO 8-GA)
			(EACH INCLUDES)
	2L-8049	[1]	TERMINAL-RING (6-GA, NO. 10 SCREW)
			-OR-
	2L-8057	[1]	TERMINAL-RING (8-GA, NO. 10 SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1488	[2]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1489	[2]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	2L-8051	[1]	TERMINAL-RING (6-GA, 5/16-IN SCREW)
			-OR-
	5P-3455	[1]	TERMINAL-RING (8-GA, 5/16-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1490	[2]	TERMINAL AS (6-GA TO 8-GA)
			(EACH INCLUDES)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	119-3662 E	[4]	TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1501	[2]	TERMINAL AS (14-GA TO 16-GA)
			(EACH INCLUDES)
	2L-8074	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM)
2.	350-9452 Y	[1]	CONNECTION GP-ELECTRICAL
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP33940903

109-3033: WIRING GP-EIS

WIRING GP-EIS

109-3033 WIRING GP-EIS
S/N CTM1-UP
PART OF 104-4220 CONTROL GP-ENGINE ELECTRONIC

i00490011 SEBP3394

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	109-3034 Y	[1]	WIRING GP-INSTR & IGNITION
2.	9X-6772	[48]	STRAP-CABLE
3.	4P-7581 B	[29]	CLIP (LADDER)
4.	4P-8134 B	[14]	CLIP (LADDER)
5.	5M-2894	[20]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6.	101-8925 Y	[1]	MOUNTING GP-INSTRUMENT PANEL
7.	4P-7428	[1]	CLIP (LADDER)
8.	0S-1621	[1]	BOLT (1/2-13X1-IN)
9.	5P-8245	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
11.	4P-7429	[2]	CLIP (LADDER)
12.	6H-1717	[2]	BOLT (1/2-13X1.125-IN)
13.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP33940904

113-3381: WIRING GP-EIS

WIRING GP-EIS

113-3381 WIRING GP-EIS
S/N CRN1-UP
PART OF 108-4504 PYROMETER GP
Type 1
AN ATTACHMENT

i00474224 SEBP3394

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581	[1]	CLIP (LADDER)
2.	229-5556	[1]	HARNESS AS-SENSOR (EXHAUST)
3.	3S-2093	[12]	STRAP-CABLE
4.	9X-6772	[13]	STRAP-CABLE
5.	4P-8134	[15]	CLIP (LADDER)
6.	3B-4501	[4]	LOCKWASHER
7.	9X-6259	[4]	SCREW-MACHINE (6-32X0.375-IN)
8.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	4P-7429	[2]	CLIP (LADDER)
10.	175-5341 Y	[12]	SENSOR GP-TEMPERATURE (EXHAUST)
11.	180-5420 Y	[2]	SENSOR GP-TEMPERATURE (TURBOCHARGER)
12.	6B-5072	[2]	ADAPTER
13.	5N-2126	[12]	CONNECTOR (THERMOCOUPLE)
	Y		SEPARATE ILLUSTRATION

#SEBP33940905

113-3381: WIRING GP-EIS

WIRING GP-EIS

113-3381 WIRING GP-EIS
S/N CRN1-UP
PART OF 108-4504 PYROMETER GP
Type 2
AN ATTACHMENT

i02106169 SEBP3394

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581	[1]	CLIP (LADDER)
2.	243-5281 C	[1]	HARNESS AS-SENSOR (EXHAUST)
	8T-6342 E		TUBE-HEAT SHRINK (3.2-MM DIA)(40-CM)
	104-3651	[1]	LOCKNUT (1-11-1/2 NPT THD)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	192-6549	[1]	PLATE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(KIT INCLUDES WEDGE, RECETACLE & PLUG)
3.	3S-2093	[12]	STRAP-CABLE
4.	9X-6772 B	[13]	STRAP-CABLE
5.	4P-8134	[15]	CLIP (LADDER)
6.	3B-4501	[4]	LOCKWASHER
7.	9X-6259	[4]	SCREW-MACHINE (6-32X0.375-IN)
8.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	4P-7429	[2]	CLIP (LADDER)
10.	241-9591 CY	[12]	SENSOR GP-TEMPERATURE (CYLINDER EXHAUST)
11.	180-5420 Y	[2]	SENSOR GP-TEMPERATURE (TURBOCHARGER)
12.	6B-5072	[2]	ADAPTER
13.	5N-2126	[12]	CONNECTOR (THERMOCOUPLE)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP33940906

113-3381: WIRING GP-EIS

WIRING GP-EIS

113-3381 WIRING GP-EIS
S/N CRN1-UP
PART OF 108-4504 PYROMETER GP
Type 3
AN ATTACHMENT

i02631008 SEBP3394

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[24]	STRAP-CABLE
2.	5N-2126	[12]	CONNECTOR (THERMOCOUPLE)
3.	9X-6772 BC	[10]	STRAP-CABLE
4.	116-0118 C	[12]	CLIP
5.	180-5420 Y	[2]	SENSOR GP-TEMPERATURE (TURBOCHARGER)
6.	241-9591 Y	[12]	SENSOR GP-TEMPERATURE (CYLINDER EXHAUST)
7.	243-5281	[1]	HARNESS AS-SENSOR (EXHAUST)
	8T-6342 E		TUBE-HEAT SHRINK (3.2-MM DIA)(40-CM)
	104-3651	[1]	LOCKNUT (1-11-1/2 NPT THD)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	192-6549	[1]	PLATE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
8.	0S-0509 C	[11]	BOLT (3/8-16X0.75-IN)
9.	3B-4501	[4]	LOCKWASHER
10.	4P-7429	[2]	CLIP (LADDER)
11.	4P-8134 BC	[26]	CLIP (LADDER)
12.	5M-2894 C	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
13.	6B-5072	[2]	ADAPTER
14.	9X-6259	[4]	SCREW-MACHINE (6-32X0.375-IN)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP33940907

175-7731: WIRING GP-EIS

WIRING GP-EIS

175-7731 WIRING GP-EIS -LANDFILL
S/N CRN1-UP
AN ATTACHMENT

i03194609 SEBP3394

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6772	[33]	STRAP-CABLE
2.	4P-8134	[4]	CLIP (LADDER)
3.	141-5883 Y	[1]	HARNESS AS-ENGINE
	Y		SEPARATE ILLUSTRATION

#SEBP33940908

4P-9896: WIRING GP-EIS

WIRING GP-EIS

4P-9896 WIRING GP-EIS
S/N CTM1-UP
PART OF 4P-8889 CONTROL GP-ENGINE MONITORING

i00374237 SEBP3394

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	109-4692 Y	[1]	WIRING GP-INSTR & IGNITION
2.	9X-6772	[49]	STRAP-CABLE
3.	4P-7581	[24]	CLIP (LADDER)
4.	4P-8134	[19]	CLIP (LADDER)
5.	5M-2894	[19]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6.	101-8925 Y	[1]	MOUNTING GP-INSTRUMENT PANEL
7.	4P-7428	[1]	CLIP (LADDER)
8.	5P-8245	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	0S-1621	[1]	BOLT (1/2-13X1-IN)
10.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
11.	4P-7429	[3]	CLIP (LADDER)
13.	6H-1717	[2]	BOLT (1/2-13X1.125-IN)
15.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
	Y		SEPARATE ILLUSTRATION

#SEBP33940909

166-8367: WIRING GP-ELECTRIC STARTING

WIRING GP-ELECTRIC STARTING

166-8367 WIRING GP-ELECTRIC STARTING -STARTING MOTOR
S/N CRN1-UP
AN ATTACHMENT

i01371730 SEBP3394

For full view, you need register

Parts for your G3512 GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
166-8371 Y	[1]	HARNESS AS-WIRING (ENGINE STARTING)
170-5399 Y	[1]	STRIP GP-TERMINAL (DC)
169-5384 Y	[1]	SWITCH GP-REMOTE (STARTING)

4F-7957	[2]	BOLT (1/4-20X0.875-IN)
4P-8134	[2]	CLIP (LADDER)
156-6175	[3]	CLIP (LADDER)
2D-0388	[1]	GROMMET (25.4-MM ID)
9X-6772	[5]	STRAP-CABLE
5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

New Control Panel Films Show That SR4B Generators Are Not To Be Wired In The Delta Configuration{7557,7566}
1999/04/01

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606}
Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606}

Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}

Schematic

Schematics & Wiring Diagrams
ELECTRONIC MODULAR CONTROL PANEL II (EMCP II)

Schematics & Wiring Diagrams
CATERPILLAR SWITCHGEAR

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Wiring Harness
PL1000E Communication ECM

Wiring Harness
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Testing and Adjusting

Electrical Connector - Inspect
PL1000E Communication ECM

Wiring Harness (Open Circuit) - Test
PL1000E Communication ECM

Wiring Harness (Short Circuit) - Test
PL1000E Communication ECM

Electrical Connector - Inspect
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Wiring Harness (Open Circuit) - Test
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Wiring Harness (Short Circuit) - Test
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Troubleshooting

Connector Locations
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Connector Locations
PL1000E Communication ECM

Service Magazine

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21