POWER TRAIN
CONTROL GP-TRANSMISSION HYDTRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
FILTER & LINES GP-TORQUE CONV
FILTER GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP34000310
7G-1362: CONTROL GP-TRANSMISSION HYD
7G-1362 CONTROL GP-TRANSMISSION HYD
S/N 4EY1-2361; 4EY2363-2366; 4EY2368-2369
PART OF 145-7406 TRANSMISSION AR
S/N 4EY1-2361; 4EY2363-2366; 4EY2368-2369
PART OF 145-7406 TRANSMISSION AR
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7G-1364 Y | [1] | VALVE GP-TRANSMISSION CONTROL | |
| 2. | 8M-8157 | [4] | SEAL-O-RING | |
| 3. | 3T-0918 | [2] | SLEEVE | |
| 4. | 3T-0919 | [1] | SLEEVE | |
| 5. | 6V-4365 | [2] | SEAL-O-RING | |
| 6. | 9S-8001 | [10] | PLUG | |
| 7. | 4J-7533 | [10] | SEAL-O-RING | |
| 8. | 9G-9412 | [1] | ADAPTER | |
| 9. | 8M-4992 | [1] | SEAL-O-RING | |
| 10. | 7G-9473 | [1] | SLEEVE | |
| 11. | 8M-4432 | [2] | SEAL-O-RING | |
| 12. | 2S-1457 | [1] | SLEEVE | |
| 13. | 8M-4437 | [2] | SEAL-O-RING | |
| 14. | 7G-1595 | [2] | SLEEVE | |
| 15. | 8M-5254 | [4] | SEAL-O-RING | |
| 16. | 9F-2773 | [4] | BOLT (3/8-16X8.5-IN) | |
| 17. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 19. | 120-9288 | [1] | HARNESS AS-TRANSMISSION (HYDRAULIC CONTROL) | |
| 5S-3657 | [1] | RECEPTACLE AS-CONNECTOR (10-PIN) | ||
| 20. | 8M-4988 | [1] | SEAL-O-RING | |
| 21. | 198-8761 CY | [1] | SENSOR GP-POSITION (TRANSMISSION GEAR) | |
| 22. | 3D-4197 | [1] | COVER | |
| 23. | 144-6292 Y | [1] | VALVE GP-SOLENOID (UPSHIFT) | |
| 23A. | 144-6292 Y | [1] | VALVE GP-SOLENOID (DOWNSHIFT) | |
| 24. | 6Y-0789 | [1] | PLUG | |
| 25. | 3D-2824 | [1] | SEAL-O-RING | |
| 26. | 3P-0647 | [1] | SEAL-O-RING | |
| 27. | 9S-8005 | [5] | PLUG (3/4-16-THD) | |
| 28. | 3K-0360 | [5] | SEAL-O-RING | |
| 29. | 5F-7054 | [5] | SEAL-O-RING | |
| 30. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 31. | 3J-1907 | [3] | SEAL-O-RING | |
| 32. | 9G-9150 | [2] | CLIP | |
| 33. | 0S-1594 | [6] | BOLT (3/8-16X1-IN) | |
| 34. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 35. | 6V-0484 | [1] | ELBOW | |
| 36. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 37. | 6V-0852 | [1] | CAP-DUST | |
| 38. | 0S-1619 | [2] | BOLT (3/8-16X3-IN) | |
| 39. | 0S-1617 | [6] | BOLT (5/16-18X0.75-IN) | |
| 40. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
| 41. | 6T-5132 | [1] | COVER | |
| 42. | 6T-5133 | [1] | GASKET | |
| 43. | 100-3998 | [1] | MANIFOLD AS | |
| 5P-7661 | [1] | BEARING AS-NEEDLE | ||
| 44. | 8M-4446 | [1] | SEAL-O-RING | |
| 45. | 7S-5757 | [1] | RING-RETAINING | |
| 46. | 6Y-9850 | [1] | COUPLING AS | |
| 47. | 8S-5575 | [1] | SEAL-LIP TYPE | |
| 48. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 49. | 2S-6160 C | [4] | WASHER-HARD (10.2X32X5-MM THK) | |
| 50. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 51. | 238-1034 C | [1] | GUARD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34000311
7G-1362: CONTROL GP-TRANSMISSION HYD
7G-1362 CONTROL GP-TRANSMISSION HYD
S/N 4EY2362-2362; 4EY2367-2367; 4EY2370-UP
PART OF 145-7406 TRANSMISSION AR
S/N 4EY2362-2362; 4EY2367-2367; 4EY2370-UP
PART OF 145-7406 TRANSMISSION AR
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7G-1364 Y | [1] | VALVE GP-TRANSMISSION CONTROL | |
| 2. | 8M-8157 | [4] | SEAL-O-RING | |
| 3. | 3T-0918 | [2] | SLEEVE | |
| 4. | 3T-0919 | [1] | SLEEVE | |
| 5. | 6V-4365 | [2] | SEAL-O-RING | |
| 6. | 9S-8001 | [10] | PLUG | |
| 7. | 4J-7533 | [10] | SEAL-O-RING | |
| 8. | 9G-9412 | [1] | ADAPTER | |
| 9. | 8M-4992 | [1] | SEAL-O-RING | |
| 10. | 7G-9473 | [1] | SLEEVE | |
| 11. | 8M-4432 | [2] | SEAL-O-RING | |
| 12. | 2S-1457 | [1] | SLEEVE | |
| 13. | 8M-4437 | [2] | SEAL-O-RING | |
| 14. | 7G-1595 | [2] | SLEEVE | |
| 15. | 8M-5254 | [4] | SEAL-O-RING | |
| 16. | 9F-2773 | [4] | BOLT (3/8-16X8.5-IN) | |
| 17. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 19. | 120-9288 | [1] | HARNESS AS-TRANSMISSION (HYDRAULIC CONTROL) | |
| 5S-3657 | [1] | RECEPTACLE AS-CONNECTOR (10-PIN) | ||
| 9W-3086 | [1] | KEY-POLARIZING | ||
| 20. | 8M-4988 | [1] | SEAL-O-RING | |
| 21. | 216-0280 CY | [1] | SENSOR GP-POSITION (TRANSMISSION GEAR) | |
| 22. | 3D-4197 | [1] | COVER | |
| 23. | 144-6292 Y | [1] | VALVE GP-SOLENOID (UPSHIFT) | |
| 23A. | 144-6292 Y | [1] | VALVE GP-SOLENOID (DOWNSHIFT) | |
| 24. | 6Y-0789 | [1] | PLUG | |
| 25. | 3D-2824 | [1] | SEAL-O-RING | |
| 26. | 3P-0647 | [1] | SEAL-O-RING | |
| 27. | 9S-8005 | [5] | PLUG (3/4-16-THD) | |
| 28. | 3K-0360 | [5] | SEAL-O-RING | |
| 29. | 5F-7054 | [5] | SEAL-O-RING | |
| 30. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 31. | 3J-1907 | [3] | SEAL-O-RING | |
| 32. | 9G-9150 | [2] | CLIP | |
| 33. | 0S-1594 | [6] | BOLT (3/8-16X1-IN) | |
| 34. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 35. | 6V-0484 | [1] | ELBOW | |
| 36. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 37. | 6V-0852 | [1] | CAP-DUST | |
| 38. | 0S-1619 | [2] | BOLT (3/8-16X3-IN) | |
| 39. | 0S-1617 | [6] | BOLT (5/16-18X0.75-IN) | |
| 40. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
| 41. | 6T-5132 | [1] | COVER | |
| 42. | 6T-5133 | [1] | GASKET | |
| 43. | 100-3998 | [1] | MANIFOLD AS | |
| 43A. | 5P-7661 | [1] | BEARING AS-NEEDLE | |
| 44. | 8M-4446 | [1] | SEAL-O-RING | |
| 45. | 7S-5757 | [1] | RING-RETAINING | |
| 46. | 6Y-9850 | [1] | COUPLING AS | |
| 47. | 8S-5575 | [1] | SEAL-LIP TYPE | |
| 48. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 49. | 2S-6160 | [4] | WASHER-HARD (10.2X32X5-MM THK) | |
| 50. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 51. | 238-1034 | [1] | GUARD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34000312
145-8282: COVER GP-SHIPPING
145-8282 COVER GP-SHIPPING -TRANSMISSION
S/N 4EY1-UP
PART OF 145-7406 TRANSMISSION AR
S/N 4EY1-UP
PART OF 145-7406 TRANSMISSION AR
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-3725 | [1] | COVER | |
| 2. | 8E-7366 | [1] | GASKET | |
| 3. | 0T-0768 | [4] | BOLT (7/16-14X1.75-IN) | |
| 4. | 4F-4879 | [2] | BOLT (3/8-16X0.5-IN) | |
| 5. | 8E-5287 | [1] | STRAP | |
| 6. | 7J-0402 | [1] | COVER | |
| 7. | 8E-7367 | [1] | GASKET | |
| 8. | 0S-1620 | [4] | BOLT (1/2-13X0.75-IN) | |
| 9. | 2J-2668 | [2] | COVER-FLANGE | |
| 10. | 4J-0524 | [2] | SEAL-O-RING | |
| 11. | 3J-5389 | [1] | PLUG (EXTERNAL) | |
| 12. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP34000313
9D-8935: DIFFERENTIAL & BEVEL GEAR GP
9D-8935 DIFFERENTIAL & BEVEL GEAR GP
S/N BCA1-UP
PART OF 131-3528 POWER TRAIN AR
S/N BCA1-UP
PART OF 131-3528 POWER TRAIN AR
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-6054 | [1] | YOKE | |
| 2. | 9D-9864 | [1] | CAGE-BEARING | |
| 3. | 9M-3879 | [1] | SEAL-LIP TYPE | |
| 4. | 9D-0019 B | [5] | SHIM (0.13-MM THK) | |
| 5. | 9D-0021 B | [5] | SHIM (0.18-MM THK) | |
| 6. | 5S-3676 | [1] | SEAL-O-RING | |
| 7. | 228-7555 | [1] | CARRIER AS | |
| 8F-4486 | [4] | BOLT (1-1/8-7X6.5-IN) | ||
| 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | ||
| 3D-5692 | [4] | BUSHING-TERMINAL | ||
| 8. | 0L-1178 | [16] | BOLT (3/4-10X2-IN) | |
| 11. | 4D-5289 | [2] | RING-ADJUSTMENT | |
| 12. | 1B-4034 | [1] | CONE-BEARING | |
| 13. | 4B-8393 | [1] | CUP-BEARING | |
| 14. | 7D-3029 | [1] | PIN-THRUST | |
| 15. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 17. | 8M-3391 | [1] | COVER | |
| 18. | 9M-5874 B | [1] | SHIM PACK (INCLUDES 30-SHIMS) | |
| 19. | 2H-3932 | [1] | SEAL-O-RING | |
| 20. | 5P-8081 | [36] | BOLT-LOCKING (3/4-16X2-IN) | |
| 21. | 5P-8248 | [53] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 22. | 8D-3382 | [1] | GEAR-DIFFERENTIAL RING (52 TEETH) | |
| 23. | 107-7857 CY | [1] | DIFFERENTIAL GP | |
| 24. | 6K-7917 | [2] | BOLT-LOCKING (1/2-13X1-IN) | |
| 26. | 9K-4454 | [2] | LOCK | |
| 27. | 2D-9457 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 28. | 4F-2041 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 29. | 2D-9454 | [1] | CUP-BEARING | |
| 30. | 2D-9455 | [1] | CONE-BEARING | |
| 31. | 3D-8422 | [1] | SEAL-O-RING | |
| 32. | 8X-7701 | [1] | PINION (19-TEETH) | |
| 33. | 7B-3235 | [8] | BOLT (1/2-13X1.375-IN) | |
| 34. | 6V-2700 | [1] | SEAL-O-RING | |
| 36. | 1B-6579 | [1] | CONE-BEARING | |
| 37. | 6V-3579 | [1] | CUP-BEARING | |
| 38. | 6G-5495 | [1] | COLLAR | |
| 39. | 5P-3882 | [1] | BOLT-LOCKING (3/4-10X2.25-IN) | |
| 41. | 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34000314
107-7857: DIFFERENTIAL GP
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 101-7517 | [1] | HOUSING (DIFFERENTIAL) | |
| 2. | 3D-6509 | [2] | DOWEL | |
| 3. | 6G-0703 | [1] | SPIDER-DIFFERENTIAL | |
| 4. | 8W-8671 | [4] | PINION-DIFFERENTIAL BEVEL (20-TEETH) | |
| 5. | 108-3187 | [1] | HOUSING AS-DIFFERENTIAL | |
| 6. | 3D-6509 | [6] | DOWEL | |
| 7. | 4D-8132 | [4] | BEARING AS-ROLLER | |
| 8. | 4D-7536 | [4] | LOCKNUT | |
| 9. | 107-2958 | [4] | NUT (2-1/8-12-THD) | |
| 10. | 2H-3749 | [8] | BOLT (3/4-16X7-IN) | |
| 11. | 2K-0337 | [8] | LOCKNUT (3/4-16-THD) | |
| 12. | 5P-8248 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 13. | 3D-5564 | [2] | WASHER-THRUST | |
| 14. | 4D-8131 | [4] | RETAINER | |
| 15. | 8W-7702 | [2] | GEAR-DIFFERENTIAL BEVEL (24-TEETH) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP34000315
6D-1520: DRIVE GP-FINAL
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7D-7604 CB | [1] | SHAFT-AXLE (LH) | |
| 2. | 7D-7605 CB | [1] | SHAFT-AXLE (RH) | |
| 3. | 207-6089 | [2] | BEARING | |
| 4. | 160-0717 C | [2] | HUB (PLANETARY) | |
| 5. | 9M-3860 | [2] | GEAR-RING (76-TEETH) | |
| 6. | 6K-7917 C | [16] | BOLT-LOCKING (1/2-13X1-IN) | |
| 7. | 2R-0098 | [2] | SEAL-O-RING | |
| 8. | 0L-1178 | [46] | BOLT (3/4-10X2-IN) | |
| 5P-8248 | [46] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 9. | 5D-9741 | [2] | CARRIER AS | |
| (EACH INCLUDES) | ||||
| 10. | 5M-1932 | [8] | STUD-TAPERLOCK (1/2-13X2.17-IN) | |
| 11. | 6D-0692 | [2] | SEAL-O-RING | |
| 12. | 7D-7606 | [2] | GEAR (20-TEETH) | |
| 13. | 7D-6705 | [2] | RING-RETAINING | |
| 14. | 6D-6961 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 6D-6864 | [1] | BUTTON | ||
| 15. | 8M-3837 | [2] | PLUG-MAGNETIC (FINAL DRIVE) | |
| 2A-3398 C | [2] | GASKET (FINAL DRIVE MAGNETIC PLUG) | ||
| 16. | 6Y-9885 | [12] | BEARING AS-ROLLER | |
| 17. | 6V-8188 | [16] | NUT (1/2-13-THD) | |
| 8T-4223 C | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 18. | 7H-0308 | [6] | RING-RETAINING | |
| 19. | 9M-4422 | [6] | GEAR (27-TEETH) | |
| 20. | 5F-0304 | [2] | PLUG (FINAL DRIVE) | |
| 2A-1162 | [2] | GASKET (FINAL DRIVE DRAIN PLUG) | ||
| 21. | 6F-4855 | [2] | SEAL-O-RING | |
| 22. | 8X-9563 | [6] | SPACER (80.52X112.06X28.57-MM THK) | |
| 23. | 8W-7207 | [8] | RETAINER | |
| 24. | 8X-5689 | [6] | SHAFT-PLANETARY | |
| 25. | 8X-4552 | [12] | WASHER (78X127X5-MM THK) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP34000316
6D-1520: DRIVE GP-FINAL
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2R-0098 | [2] | SEAL-O-RING | |
| 2. | 5F-0304 | [2] | PLUG (FINAL DRIVE) | |
| 3. | 6Y-9885 | [12] | BEARING AS-ROLLER | |
| 4. | 7D-6705 | [2] | RING-RETAINING | |
| 5. | 7D-7604 B | [1] | SHAFT-AXLE (LH) | |
| 6. | 7D-7605 B | [1] | SHAFT-AXLE (RH) | |
| 7. | 7D-7606 | [2] | GEAR (20-TEETH) | |
| 8. | 8W-7207 | [8] | RETAINER | |
| 9. | 9M-3860 | [2] | GEAR-RING (76-TEETH) | |
| 10. | 9M-4422 | [6] | GEAR (27-TEETH) | |
| 11. | 160-0717 | [2] | HUB (PLANETARY) | |
| 12. | 212-3476 C | [6] | SHAFT | |
| 13. | 212-3479 C | [2] | CARRIER-PLANETARY | |
| 14. | 209-2671 | [2] | COVER | |
| 14A. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14B. | 034-3557 | [8] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 14C. | 209-2674 | [2] | PLATE | |
| 15. | 229-7375 C | [2] | BEARING | |
| 16. | 0L-1178 | [46] | BOLT (3/4-10X2-IN) | |
| 17. | 126-8921 C | [2] | PLUG AS (FINAL DRIVE) | |
| 18. | 2A-1162 | [2] | GASKET (FINAL DRIVE DRAIN PLUG) | |
| 19. | 3D-2824 C | [2] | SEAL-O-RING (FINAL DRIVE MAGNETIC PLUG) | |
| 20. | 5M-1932 C | [16] | STUD-TAPERLOCK (1/2-13X2.17-IN) | |
| 21. | 5P-8248 | [46] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 22. | 6D-0692 | [2] | SEAL-O-RING | |
| 23. | 6F-4855 | [2] | SEAL-O-RING | |
| 24. | 6K-7917 | [16] | BOLT-LOCKING (1/2-13X1-IN) | |
| 25. | 6T-5545 C | [6] | DOWEL | |
| 26. | 6V-8188 | [16] | NUT (1/2-13-THD) | |
| 27. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8X-4552 | [12] | WASHER (78X127X5-MM THK) | |
| 29. | 8X-9563 | [6] | SPACER (80.52X112.06X28.57-MM THK) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP34000317
6D-1520: DRIVE GP-FINAL
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-3398 C | [2] | GASKET | |
| 2. | 2R-0098 | [2] | SEAL-O-RING | |
| 3. | 5F-0304 | [2] | PLUG (FINAL DRIVE OIL DRAIN) | |
| 4. | 6D-6961 C | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 6D-6864 | [1] | BUTTON | ||
| 5. | 6Y-9885 | [12] | BEARING AS-ROLLER | |
| 6. | 7D-6705 | [2] | RING-RETAINING | |
| 7. | 7D-7604 | [1] | SHAFT-AXLE (LH) | |
| 8. | 7D-7605 | [1] | SHAFT-AXLE (RH) | |
| 9. | 7H-0308 C | [6] | RING-RETAINING | |
| 10. | 8M-3837 C | [2] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 11. | 8W-7207 | [8] | RETAINER | |
| 12. | 8X-5689 C | [6] | SHAFT-PLANETARY | |
| 13. | 9M-3860 | [2] | GEAR-RING (76-TEETH) | |
| 14. | 160-0717 | [2] | HUB | |
| 15. | 229-7375 | [2] | BEARING | |
| 16. | 242-9979 | [2] | GEAR-SUN (20-TEETH) | |
| 17. | 242-9980 | [6] | GEAR (27-TEETH) | |
| 18. | 278-0174 C | [2] | CARRIER-PLANETARY | |
| 19. | 0L-1178 | [46] | BOLT (3/4-10X2-IN) | |
| 20. | 2A-1162 | [2] | GASKET | |
| 21. | 5M-1932 | [16] | STUD-TAPERLOCK (1/2-13X2.17-IN) | |
| 22. | 5P-8248 | [46] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 23. | 6D-0692 | [2] | SEAL-O-RING | |
| 24. | 6F-4855 | [2] | SEAL-O-RING | |
| 25. | 6K-7917 | [16] | BOLT-LOCKING (1/2-13X1-IN) | |
| 26. | 6V-8188 | [16] | NUT (1/2-13-THD) | |
| 27. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8X-4552 | [12] | WASHER (78X127X5-MM THK)(78.13X127X5.16-MM THK) | |
| 29. | 8X-9563 | [6] | SPACER (80.52X112.06X28.57-MM THK) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP34000318
144-5324: FILTER & LINES GP-TORQUE CONV
144-5324 FILTER & LINES GP-TORQUE CONV
S/N BCA215-UP; 5XD1-1366
PART OF 142-5740 TORQUE CONVERTER AR
S/N BCA215-UP; 5XD1-1366
PART OF 142-5740 TORQUE CONVERTER AR
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [1] | CAP-DUST | |
| 2. | 8P-1471 Y | [1] | VALVE GP-RELIEF (TORQUE CONVERTER OUTLET) | |
| 3. | 128-2352 Y | [1] | VALVE GP-LOCKUP CLUTCH & SOL | |
| 4. | 150-3065 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-0484 | [1] | ELBOW | ||
| 5. | 159-0246 | [1] | TUBE AS | |
| 6. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 7. | 148-8327 | [1] | CONNECTOR AS | |
| 6V-8637 | [1] | CONNECTOR | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 8. | 172-4612 | [1] | ELBOW AS | |
| 6V-8549 | [1] | ELBOW | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 10. | 1P-4578 | [2] | FLANGE-HALF | |
| 11. | 1P-4579 | [2] | FLANGE-HALF | |
| 12. | 5P-2424 | [8] | BOLT (1/2-13X2.25-IN) | |
| 13. | 5P-2566 | [4] | BOLT (1/2-13X1.5-IN) | |
| 14. | 7X-0290 | [3] | BOLT (3/8-16X3.5-IN) | |
| 15. | 7X-0296 | [3] | BOLT (3/8-16X5.5-IN) | |
| 17. | 8M-4435 | [2] | SEAL-O-RING | |
| 18. | 8M-4443 | [1] | SEAL-O-RING | |
| 19. | 8M-8157 | [1] | SEAL-O-RING | |
| 20. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 22. | 8T-5360 | [4] | WASHER (12X22.5X2.5-MM THK) | |
| 23. | 8T-8916 | [4] | BOLT (7/16-14X1.5-IN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34000319
132-5447: FILTER GP-OIL
132-5447 FILTER GP-OIL -POWER TRAIN
S/N BCA1-UP
PART OF 135-9971 LINES GP-POWER TRAIN OIL
S/N BCA1-UP
PART OF 135-9971 LINES GP-POWER TRAIN OIL
For full view, you need register
Parts for your 771D QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1G-8878 | [2] | FILTER-OIL (ADVANCED EFFICIENCY) | |
| -OR- | ||||
| 102-2828 | [2] | FILTER-OIL (ULTRA HIGH EFFICIENCY) | ||
| -OR- | ||||
| 156-0214 | [2] | FILTER-OIL (FIRE RESISTANT FLUID) | ||
| 3. | 8C-3446 | [1] | VALVE-SAMPLING (POWER TRAIN) | |
| 4. | 8C-3451 | [1] | CAP-DUST (HYDRAULIC OIL) | |
| 5. | 227-6744 | [1] | SWITCH GP-PRESSURE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (14-CM) | |||
| 6. | 3J-1907 | [1] | SEAL-O-RING | |
| 7. | 3J-7354 | [1] | SEAL-O-RING | |
| 8. | 5F-9144 | [1] | SEAL-O-RING | |
| 341-6643 F | [2] | FILTER ELEMENT-OIL (ADVANCED EFFICIENCY) | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
Information:
Caterpillar Parts SIS Catalog 771D :
Truck sale:
111,588
