204-2117 WIRING GP-AIR CONDITIONER S/N BKL1-UP PART OF 189-6503 AIR CONDITIONER AR 815F SOIL COMPACTOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 204-2117 WIRING GP-
1. 189-9363 WIRING GP-
2. 195-2639 WIRING GP-
3. 191-2478 WIRING GP-
4. 210-1961 WIRING GP-
5. 189-6460 WIRING GP-
6. 189-6460 WIRING GP-
7. 189-6459 WIRING GP-
8. 189-6461 WIRING GP-
9. 117-2760 WIRING GP-
0. INFORMATION

SOIL COMPACTOR 815F SOIL COMPACTOR BKL
815F Soil Compactor BKL00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3404 815F BKL (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

189-6458 BATTERY & WIRING GP

172-8660 SWITCH GP-LIQUID LEVEL

204-2117 WIRING GP-AIR CONDITIONER

189-9363 WIRING GP-CAB

195-2639 WIRING GP-CAB

191-2478 WIRING GP-ENGINE

#SEBP34040170

204-2117: WIRING GP-AIR CONDITIONER

WIRING GP-AIR CONDITIONER

204-2117 WIRING GP-AIR CONDITIONER
S/N BKL1-UP
PART OF 189-6503 AIR CONDITIONER AR

i01538782 SEBP3404

2042117 WIRING GP-AIR CONDITIONER Parts scheme

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	9X-6772	[4]	STRAP-CABLE
3.	106-8704	[1]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	114-5333	[1]	SWITCH AS-PRESSURE (HIGH LOW)(REFRIGERANT)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
5.	4P-8134	[2]	CLIP (LADDER)
6.	4P-7581	[1]	CLIP (LADDER)
7.	7D-1728	[1]	CLIP
8.	9X-7378	[1]	SEAL-O-RING

#SEBP34040171

189-9363: WIRING GP-CAB

WIRING GP-CAB

189-9363 WIRING GP-CAB
S/N BKL1-UP
PART OF 189-9360 CAB AR

i01535238 SEBP3404

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	192-0921	[1]	HARNESS AS-CAB (LOWER)
	7X-2639		TUBE-HEAT SHRINK (50.8-MM DIA)(20-CM)
	9G-3676	[1]	HOUSING-RECEPTACLE
	3T-3047	[1]	CLIP AS
	7K-4474	[1]	CONNECTOR AS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCULDES RECEPTACLE AS & WEGDE)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-7143	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2255	[4]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL)
2.	4P-8134	[4]	CLIP (LADDER)
3.	9X-2041 M	[9]	SCREW-TRUSS HEAD (M10X1.5X20-MM)
4.	7K-1181	[9]	STRAP-CABLE
5.	3S-2093	[25]	STRAP-CABLE
6.	4P-7581	[4]	CLIP (LADDER)
7.	192-0922	[1]	HARNESS AS-CAB (UPPER)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCULDES RECEPTACLE AS & WEDGE)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL)
8.	4V-4164	[16]	BUSHING-TERMINAL
9.	9L-6074	[8]	GROMMET
10.	9F-8125	[16]	LOCKWASHER
11.	4B-2048	[16]	NUT (10-32-THD)
12.	6D-6146	[8]	SCREW-MACHINE (10-32X1.25-IN)
13.	098-8968	[16]	WASHER (5X16X1.2-MM THK)
14.	9M-8406	[1]	CLIP (LOOP)
15.	194-4781	[1]	PLATE AS
16.	102-4130	[1]	GASKET
17.	8T-4138 M	[5]	BOLT (M6X1X20-MM)
18.	5C-8312 M	[8]	NUT (M4X0.7-THD)
19.	096-6166	[8]	WASHER-HARD (4.5X9X1-MM THK)
20.	8T-9405 M	[8]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
21.	5P-7657 D		SEAL (.1M)
22.	111-8436	[1]	BRACKET AS
23.	4E-3429	[1]	BRACKET AS
24.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 M	[2]	NUT (M10X1.5-THD)
26.	9G-3659	[2]	CLIP
27.	4E-3432	[1]	BRACKET AS
	8T-4967 M	[1]	STUD-WELD (M10X1.5X23-MM)
29.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
30.	5C-2890 M	[1]	NUT (M6X1-THD)
31.	1V-8506	[1]	GROMMET
32.	8T-4244 M	[1]	NUT (M12X1.75-THD)
33.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	6K-8178	[1]	CLIP (LOOP)
35.	192-0923	[2]	HARNESS AS-LIGHTING (CAB FLOOD, INNER)
			(EACH INCLUDES)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL)
36.	192-0924	[2]	HARNESS AS-LIGHTING (CAB FLOOD, OUTER)
			(EACH INCLUDES)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL)
37.	205-4285	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
38.	6V-2687	[2]	SCREW-PAN HEAD (10-24X1-IN)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP34040172

195-2639: WIRING GP-CAB

WIRING GP-CAB

195-2639 WIRING GP-CAB
S/N BKL1-UP
PART OF 194-9705 CANOPY AR-OPEN ROPS

i01537071 SEBP3404

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4133 M	[4]	NUT (M10X1.5-THD)
2.	8M-2770	[8]	CLIP (LOOP)
3.	8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
5.	192-0921	[1]	HARNESS AS-CAB (LOWER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2255	[4]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-7143	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	3T-3047	[1]	CLIP AS
6.	4P-8134	[4]	CLIP (LADDER)
7.	7K-1181	[11]	STRAP-CABLE
8.	9X-2041 M	[13]	SCREW-TRUSS HEAD (M10X1.5X20-MM)
9.	3S-2093	[9]	STRAP-CABLE
10.	4P-7581	[4]	CLIP (LADDER)
11.	098-8968	[4]	WASHER (5X16X1.2-MM THK)
12.	6D-9331	[6]	WASHER (5X9X74-MM THK)
13.	9D-7303	[2]	GROMMET
14.	9F-8125	[4]	LOCKWASHER
15.	4B-2048	[4]	NUT (10-32-THD)
16.	6D-6146	[2]	SCREW-MACHINE (10-32X1.25-IN)
17.	4V-4164	[4]	BUSHING-TERMINAL
18.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
19.	8T-4244 M	[1]	NUT (M12X1.75-THD)
20.	111-9855	[1]	BRACKET AS
21.	193-3078	[1]	PLATE AS
24.	102-4130	[1]	GASKET
25.	193-3079	[1]	PLATE
26.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
27.	8T-9405 M	[8]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
28.	096-6166	[8]	WASHER-HARD (4.5X9X1-MM THK)
29.	5C-8312 M	[8]	NUT (M4X0.7-THD)
30.	5P-7657 D		SEAL (0.1-M)
31.	9G-3695	[5]	PLUG-SEAL
32.	9G-3672	[1]	HOUSING AS-CONNECTOR
33.	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
34.	9X-2043 M	[8]	SCREW-TRUSS HEAD (M6X1X14-MM)
35.	194-4781	[1]	PLATE AS
	6V-9632 M	[4]	NUT-WELD (M6X1-THD)
36.	195-7969	[1]	HARNESS AS-CAB (UPPER)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	8L-8413	[2]	STRAP-CABLE (WHITE)
37.	275-8966	[1]	HARNESS AS-WIRING (JUMPER)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS & WEDGE)
38.	205-4285	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
39.	9X-1046 M	[2]	SCREW (M4X0.7X18-MM)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP34040173

191-2478: WIRING GP-ENGINE

WIRING GP-ENGINE

191-2478 WIRING GP-ENGINE
S/N BKL1-UP
PART OF 189-6447 ELECTRICAL AR

i01535293 SEBP3404

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-7842	[1]	RESISTOR AS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
2.	4H-1225	[1]	WASHER (11X22X6-MM THK)
3.	4I-7596	[1]	SUPPORT AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	7K-1181	[4]	STRAP-CABLE
5.	9X-6772	[9]	STRAP-CABLE
6.	124-3019	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
7.	130-9811	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER)
8.	136-9699	[1]	BRACKET AS
9.	188-2501	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
10.	215-1328	[1]	HARNESS AS-ENGINE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	8N-1525	[1]	PLUG AS-CONNECTOR (20-PIN)
	8N-1535	[1]	BELL AS-END
	8N-1521	[1]	BELL AS-END
	8T-8737	[49]	PLUG-SEAL
	7G-7917	[11]	PLUG-SEAL
11.	194-5618	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
12.	194-6722 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	5K-3294	[1]	CLIP
15.	130-5300	[4]	CLIP
16.	6V-1889	[3]	CLIP (LOOP)
17.	3J-1907	[1]	SEAL-O-RING
18.	3K-0360	[1]	SEAL-O-RING
19.	4D-7794	[2]	CLIP
20.	4D-9517	[1]	CLIP
21.	124-1479	[1]	CLIP
22.	4P-7581	[1]	CLIP (LADDER)
23.	4P-8134	[3]	CLIP (LADDER)
24.	6D-3479	[1]	CLIP (LOOP)
25.	6D-4244	[1]	CLIP (LOOP)
26.	6V-8801	[2]	NUT (3/8-16-THD)
27.	8M-2770	[1]	CLIP (LOOP)
28.	8M-2773	[2]	CLIP (LOOP)
29.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
31.	8T-4137 M	[10]	BOLT (M10X1.5X20-MM)
32.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
33.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
35.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
36.	8T-9383	[1]	BOLT (1/2-13X0.75-IN)
37.	9X-8250	[3]	CLIP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34040174

210-1961: WIRING GP-ENGINE

WIRING GP-ENGINE

210-1961 WIRING GP-ENGINE
S/N 3PD1-UP
PART OF 184-1158 ENGINE AR, 285-5777 ENGINE AR-COMPLETE

i01686121 SEBP3404

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-7077	[1]	SPACER (0.406X0.62X0.37-IN THK)
2.	3E-7448	[1]	CONNECTOR
3.	3S-2093	[10]	STRAP-CABLE
4.	9X-0262	[2]	ADAPTER
5.	197-8391 Y	[1]	SENSOR GP-TEMPERATURE (FUEL)
5A.	197-8391 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD)
6.	197-8392 Y	[1]	SENSOR GP-TEMPERATURE (WATER, COOLANT)
7.	197-8393 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
8.	197-8394 Y	[1]	SENSOR GP-PRESSURE (FUEL)
8A.	197-8394 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL)
9.	197-8395 Y	[1]	SENSOR GP-PRESSURE (AIR INLET MANIFOLD)
10.	197-8396 Y	[1]	SENSOR GP-SPEED (CRANKSHAFT TIMING)
11.	197-8397 Y	[1]	SENSOR GP-SPEED (CAMSHAFT TIMING)
12.	218-4604	[1]	HARNESS AS-SENSOR (FUEL PRESSURE SENSOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE AND INTERFACE SEAL)
13.	218-4605	[1]	HARNESS AS (FUEL TEMPERATURE SENSOR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE AND INTERFACE SEAL)
14.	222-4086	[1]	HARNESS AS (ENGINE ELECTRONIC)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS & WEDGE AND INTERFACE SEAL)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE AND INTERFACE SEAL)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDE PLUG AS & WEDGE AND INTERFACE SEAL)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	9X-1386 E		SLEEVE (25-CM)
	126-1774	[1]	COVER-CONNECTOR
15.	134-3988	[1]	CLIP (LOOP)
16.	183-4403	[2]	CLIP (LOOP)
17.	2V-3216	[1]	CLIP (LOOP)
18.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
19.	4D-7794	[1]	CLIP
20.	5P-9085	[1]	CLIP (LOOP)
21.	4P-7581	[2]	CLIP (LADDER)
22.	4P-8134	[2]	CLIP (LADDER)
23.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
24.	6V-4369	[1]	CLIP
25.	6V-5048	[3]	SEAL-O-RING
26.	6V-5215 M	[2]	BOLT (M8X1.25X16-MM)
27.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
28.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
29.	6V-7981 M	[1]	BOLT (M10X1.5X70-MM)
30.	6V-8214 M	[2]	BOLT (M6X1X20-MM)
31.	6V-8837 M	[1]	BOLT (M6X1X16-MM)
32.	7K-1181	[1]	STRAP-CABLE
33.	8J-1256	[2]	CLIP (LOOP)
35.	8M-2771	[1]	CLIP
36.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
37.	9S-8002	[1]	PLUG (7/16-20-THD)
38.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34040175

189-6460: WIRING GP-MACHINE

WIRING GP-MACHINE

189-6460 WIRING GP-MACHINE
S/N BKL1-515
PART OF 189-6447 ELECTRICAL AR

i01535289 SEBP3404

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	4L-1263	[4]	NUT-SPACER (3/8-16-THD)
3.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
4.	8T-9655	[8]	MOUNT-ISOLATION
5.	9V-9311	[1]	BRACKET
6.	9X-6772	[24]	STRAP-CABLE
7.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK)
8.	130-9811	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
9.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
10.	142-3331	[1]	BRACKET AS
11.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
12.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
13.	164-7577 Y	[1]	SWITCH GP-BYPASS (POWER TRAIN OIL FILTER)
14.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
15.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
16.	174-7875	[1]	HORN AS (24-VOLT, HIGH TONE)
17.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
18.	189-6461 Y	[1]	WIRING GP-RELAY PANEL
19.	215-9686	[1]	HARNESS AS-CHASSIS (CAB FLOOR PEDALS)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	8T-8737	[2]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
20.	215-9687	[1]	HARNESS AS-CHASSIS (HORN, BYPASS SW, FUEL SENDER)
	8T-8737	[3]	PLUG-SEAL
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
21.	192-3783	[1]	HARNESS AS-CHASSIS (HORN, RH, HYDRAULIC TANK)
	8T-8737	[1]	PLUG-SEAL
	155-2273	[1]	PLUG AS-CONNECTOR (6-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
22.	192-3785	[1]	HARNESS AS-CHASSIS (FIREWALL)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	8T-8737	[4]	PLUG-SEAL
23.	205-5723	[1]	BRACKET AS
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
24.	033-8248	[2]	CLIP (LOOP)
25.	115-3072	[2]	CLIP AS-CONNECTING (8-PIN)
26.	130-5300	[14]	CLIP
27.	130-5301	[1]	CLIP
28.	2M-9780	[1]	SEAL-O-RING
29.	3D-2824	[1]	SEAL-O-RING
30.	3J-1907	[2]	SEAL-O-RING
31.	3K-0360	[1]	SEAL-O-RING
32.	4D-7388	[1]	CLIP (LOOP)
33.	4D-7794	[6]	CLIP
34.	4P-8134	[1]	CLIP (LADDER)
35.	4L-6454	[1]	BOLT (3/8-16X1-IN)
36.	4P-7428	[1]	CLIP (LADDER)
37.	4S-1962	[2]	CLIP (LOOP)
38.	4S-4455	[1]	CLIP
39.	5M-3062	[6]	BOLT (3/8-16X0.75-IN)
40.	5P-7854	[1]	CLIP
41.	5P-9085	[2]	CLIP (LOOP)
42.	3S-2093	[1]	STRAP-CABLE
43.	6D-4246	[3]	CLIP (LOOP)
44.	6K-8178	[1]	CLIP (LOOP)
45.	6V-1889	[4]	CLIP (LOOP)
46.	6V-3964	[4]	WASHER-HARD (8.8X25.5X5-MM THK)
47.	6V-8188	[1]	NUT (1/2-13-THD)
48.	6V-8801	[24]	NUT (3/8-16-THD)
49.	8M-2770	[5]	CLIP (LOOP)
50.	8M-2772	[1]	CLIP (LOOP)
51.	8T-0276 M	[4]	BOLT (M8X1.25X45-MM)
52.	8T-2502	[2]	BOLT (3/8-16X1.125-IN)
53.	8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
54.	8T-4133 M	[7]	NUT (M10X1.5-THD)
55.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
57.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
58.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
59.	8T-4896	[33]	WASHER-HARD (10.2X18.5X2.5-MM THK)
61.	9M-8406	[11]	CLIP (LOOP)
62.	9X-8250	[1]	CLIP
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34040176

189-6460: WIRING GP-MACHINE

WIRING GP-MACHINE

189-6460 WIRING GP-MACHINE
S/N BKL516-UP
PART OF 189-6447 ELECTRICAL AR

i02103970 SEBP3404

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[1]	STRAP-CABLE
3.	4L-1263	[4]	NUT-SPACER (3/8-16-THD)
4.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
5.	8T-9655	[8]	MOUNT-ISOLATION
6.	9X-6772	[24]	STRAP-CABLE
7.	130-9811	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
8.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
9.	142-3331	[1]	BRACKET AS
10.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	9G-3695	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
11.	163-1201 C	[2]	HORN AS (24-VOLT, LOW TONE)
12.	164-7577 Y	[1]	SWITCH GP-BYPASS (POWER TRAIN OIL FILTER)
13.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK)
14.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
15.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
16.	174-7875 C	[2]	HORN AS (24-VOLT, HIGH TONE)
17.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
18.	189-6461 Y	[1]	WIRING GP-RELAY PANEL
19.	192-3785	[1]	HARNESS AS-CHASSIS (FIREWALL)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	8T-8737	[4]	PLUG-SEAL
20.	205-5723	[1]	BRACKET AS
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
21.	215-9686	[1]	HARNESS AS-CHASSIS (CAB FLOOR PEDALS)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
22.	240-6792 C	[1]	BRACKET
23.	246-2355 C	[1]	HARNESS AS-HYDRAULIC TANK (HORNS, OIL LEVEL, TEMP SENSORS)
	8T-8737	[1]	PLUG-SEAL
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
24.	246-2356 C	[1]	HARNESS AS-CHASSIS (HORN, BYPASS SW, FUEL SENDER)
	8T-8737	[3]	PLUG-SEAL
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
25.	247-4866 C	[1]	PLATE AS
26.	033-8248	[2]	CLIP (LOOP)
27.	115-3072	[2]	CLIP AS-CONNECTING (8-PIN)
28.	130-5300	[14]	CLIP
29.	130-5301	[1]	CLIP
30.	2M-9780	[1]	SEAL-O-RING
31.	3D-2824	[1]	SEAL-O-RING
32.	3J-1907	[2]	SEAL-O-RING
33.	3K-0360	[1]	SEAL-O-RING
34.	4D-7388	[1]	CLIP (LOOP)
35.	4D-7794 C	[5]	CLIP
36.	4L-6454 C	[4]	BOLT (3/8-16X1-IN)
37.	4P-7428	[1]	CLIP (LADDER)
38.	4P-8134	[1]	CLIP (LADDER)
39.	4S-1962	[2]	CLIP (LOOP)
40.	4S-4455	[1]	CLIP
41.	5M-3062	[6]	BOLT (3/8-16X0.75-IN)
42.	5P-7854	[1]	CLIP
43.	5P-9085	[2]	CLIP (LOOP)
44.	6D-4246	[3]	CLIP (LOOP)
45.	6K-8178	[1]	CLIP (LOOP)
46.	6V-1889	[4]	CLIP (LOOP)
47.	6V-3964	[4]	WASHER-HARD (8.8X25.5X5-MM THK)
48.	6V-8188	[1]	NUT (1/2-13-THD)
49.	6V-8801	[24]	NUT (3/8-16-THD)
50.	8M-2770	[5]	CLIP (LOOP)
51.	8M-2772	[1]	CLIP (LOOP)
52.	8T-0276 M	[4]	BOLT (M8X1.25X45-MM)
53.	8T-2502	[2]	BOLT (3/8-16X1.125-IN)
54.	8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
55.	8T-4133 M	[7]	NUT (M10X1.5-THD)
56.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
57.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
58.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
59.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
60.	8T-4896 C	[36]	WASHER-HARD (10.2X18.5X2.5-MM THK)
61.	9M-8406	[11]	CLIP (LOOP)
62.	9X-8250	[1]	CLIP
63.	2K-4973	[2]	LOCKNUT (3/8-16-THD)
64.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34040177

189-6459: WIRING GP-REAR

WIRING GP-REAR

189-6459 WIRING GP-REAR
S/N BKL1-UP
PART OF 189-6447 ELECTRICAL AR

i01535288 SEBP3404

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6772	[3]	STRAP-CABLE
2.	192-1267	[1]	HARNESS AS-REAR
	8T-8737	[2]	PLUG-SEAL
	8T-8737	[2]	PLUG-SEAL
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
3.	033-8248	[8]	CLIP (LOOP)
4.	5P-7648	[2]	GROMMET
5.	5P-9299	[1]	CLIP (LOOP)
6.	6D-3479	[2]	CLIP (LOOP)
7.	6V-8801	[1]	NUT (3/8-16-THD)
8.	7X-4780	[4]	GROMMET
9.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
11.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
12.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	M		METRIC PART

#SEBP34040178

189-6461: WIRING GP-RELAY PANEL

WIRING GP-RELAY PANEL

189-6461 WIRING GP-RELAY PANEL
S/N BKL1-UP
PART OF 189-6460 WIRING GP-MACHINE

i01546094 SEBP3404

1896461 WIRING GP-RELAY PANEL Parts scheme

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER START AID)
2.	7V-9275	[1]	STRAP
3.	9G-4360	[1]	CAP-CONNECTOR
4.	9U-2277	[2]	CLIP AS
5.	9X-6772	[4]	STRAP-CABLE
6.	106-8704	[1]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	114-0931	[1]	FILM-IDENTIFICATION (SERVICE CONNECTOR)
8.	125-1302 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
9.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
10.	192-3789	[1]	PLATE AS
11.	192-3790	[1]	PLATE (INLAY)
12.	193-8121	[1]	WIRE AS
13.	199-7105	[1]	CABLE AS-START RELAY
	6V-2369 D		CABLE (4-GA, BLACK)(1-M)
	131-1478	[1]	TERMINAL AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	131-1479	[1]	TERMINAL AS
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
14.	202-9821	[1]	PLATE
15.	202-9823	[1]	PLATE-CIRCUIT BREAKER
16.	215-9685	[1]	HARNESS AS-POWER (MAIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3T-0204	[1]	RECEPTACLE AS-CONNECTOR (20-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1534	[1]	RECEPTACLE AS-CONNECTOR (20-PIN)
	9X-7144	[1]	PLUG AS-CONNECTOR (24-PIN)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
17.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
18.	3K-8782	[3]	FUSE (10-AMPERE)
19.	3T-2662	[1]	CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHT)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
20.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
21.	4B-4863	[6]	WASHER (4.7X11X1.2-MM THK)
22.	4D-8123	[1]	CLIP
23.	4K-5122	[3]	HOLDER AS-FUSE
	139-0178	[1]	CAP
24.	4S-1962	[1]	CLIP (LOOP)
25.	5C-9553 M	[3]	BOLT (M6X1X16-MM)
26.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
27.	5M-6668	[6]	SCREW-MACHINE (8-32X0.75-IN)
28.	5P-9085	[1]	CLIP (LOOP)
29.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)(KEY START)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
30.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE ELECTRONIC CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
31.	6V-1889	[1]	CLIP (LOOP)
32.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
33.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
34.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
35.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
36.	9X-8256	[5]	WASHER (6.6X12X2-MM THK)
37.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34040179

117-2760: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

117-2760 WIRING GP-UNIT INJECTOR
S/N 3PD1-UP
PART OF 184-1158 ENGINE AR, 285-5777 ENGINE AR-COMPLETE

i00492735 SEBP3404

1172760 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 815F SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-9537	[1]	HARNESS AS-WIRING (UNIT INJECTOR)
	103-8133		KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	2V-3216	[4]	CLIP (LOOP)
3.	7X-2468	[3]	CLIP
4.	7E-6508	[6]	CAP AS
5.	6V-8214 M	[9]	BOLT (M6X1X20-MM)
6.	5P-0537	[9]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines

CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines

CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21