ELECTRICAL AND STARTING SYSTEM
SWITCH GPWARNING GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBP34050170
3E-0155: SWITCH GP-WIPER
3E-0155 SWITCH GP-WIPER -FRONT-INTERMITTENT
S/N BMR1-UP
24 VOLT
PART OF 189-9364 PANEL GP-INSTRUMENT
S/N BMR1-UP
24 VOLT
PART OF 189-9364 PANEL GP-INSTRUMENT
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-7886 | [1] | SWITCH AS-WIPER (24-VOLT)(FRONT INTERMITTENT) | |
| 1A. | 2H-3920 | [1] | LOCKWASHER | |
| 1B. | 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | |
| 1C. | 6V-8369 | [1] | NUT (7/16-28-THD) | |
| 1D. | 8T-8737 | [1] | PLUG-SEAL | |
| 1E. | 9W-0852 C | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | |
| 1F. | 102-8806 C | [1] | KIT-RECEPTACLE (8-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 1G. | 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 2. | 7T-9302 | [1] | KNOB AS-WIPER SWITCH (WASHER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP34050171
189-6463: WARNING GP-BACKUP
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS#SEBP34050172
189-6463: WARNING GP-BACKUP
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS#SEBP34050173
204-5262: WIRING GP-AIR CONDITIONER
204-5262 WIRING GP-AIR CONDITIONER
S/N BMR1-UP
PART OF 189-6504 AIR CONDITIONER AR, 189-6448 ELECTRICAL AR
S/N BMR1-UP
PART OF 189-6504 AIR CONDITIONER AR, 189-6448 ELECTRICAL AR
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 9X-6772 | [3] | STRAP-CABLE | |
| 3. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(REFRIGERANT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 193-8120 | [1] | WIRE AS | |
| 6. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 7. | 4P-8134 | [2] | CLIP (LADDER) | |
| 8. | 5M-6668 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| 9. | 5P-9085 | [1] | CLIP (LOOP) | |
| 10. | 6T-3643 | [1] | CIRCUIT BREAKER AS (15-AMPERE)(AIR CONDITIONER) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 11. | 7D-1728 | [1] | CLIP | |
#SEBP34050174
189-9363: WIRING GP-CAB
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 192-0921 | [1] | HARNESS AS-CAB (LOWER) | |
| 7X-2639 | TUBE-HEAT SHRINK (50.8-MM DIA)(20-CM) | |||
| 9G-3676 | [1] | HOUSING-RECEPTACLE | ||
| 3T-3047 | [1] | CLIP AS | ||
| 7K-4474 | [1] | CONNECTOR AS | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCULDES RECEPTACLE AS & WEGDE) | ||||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 9X-0145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 9X-7143 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 2. | 4P-8134 | [4] | CLIP (LADDER) | |
| 3. | 9X-2041 M | [9] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 4. | 7K-1181 | [9] | STRAP-CABLE | |
| 5. | 3S-2093 | [25] | STRAP-CABLE | |
| 6. | 4P-7581 | [4] | CLIP (LADDER) | |
| 7. | 192-0922 | [1] | HARNESS AS-CAB (UPPER) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCULDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8. | 4V-4164 | [16] | BUSHING-TERMINAL | |
| 9. | 9L-6074 | [8] | GROMMET | |
| 10. | 9F-8125 | [16] | LOCKWASHER | |
| 11. | 4B-2048 | [16] | NUT (10-32-THD) | |
| 12. | 6D-6146 | [8] | SCREW-MACHINE (10-32X1.25-IN) | |
| 13. | 098-8968 | [16] | WASHER (5X16X1.2-MM THK) | |
| 14. | 9M-8406 | [1] | CLIP (LOOP) | |
| 15. | 194-4781 | [1] | PLATE AS | |
| 16. | 102-4130 | [1] | GASKET | |
| 17. | 8T-4138 M | [5] | BOLT (M6X1X20-MM) | |
| 18. | 5C-8312 M | [8] | NUT (M4X0.7-THD) | |
| 19. | 096-6166 | [8] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 8T-9405 M | [8] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 21. | 5P-7657 D | SEAL (.1M) | ||
| 22. | 111-8436 | [1] | BRACKET AS | |
| 23. | 4E-3429 | [1] | BRACKET AS | |
| 24. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 26. | 9G-3659 | [2] | CLIP | |
| 27. | 4E-3432 | [1] | BRACKET AS | |
| 8T-4967 M | [1] | STUD-WELD (M10X1.5X23-MM) | ||
| 29. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 30. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 31. | 1V-8506 | [1] | GROMMET | |
| 32. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 33. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 6K-8178 | [1] | CLIP (LOOP) | |
| 35. | 192-0923 | [2] | HARNESS AS-LIGHTING (CAB FLOOD, INNER) | |
| (EACH INCLUDES) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 36. | 192-0924 | [2] | HARNESS AS-LIGHTING (CAB FLOOD, OUTER) | |
| (EACH INCLUDES) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 37. | 205-4285 | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT) | |
| 38. | 6V-2687 | [2] | SCREW-PAN HEAD (10-24X1-IN) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP34050175
191-2478: WIRING GP-ENGINE
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7842 | [1] | RESISTOR AS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 2. | 4H-1225 | [1] | WASHER (11X22X6-MM THK) | |
| 3. | 4I-7596 | [1] | SUPPORT AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 7K-1181 | [4] | STRAP-CABLE | |
| 5. | 9X-6772 | [9] | STRAP-CABLE | |
| 6. | 124-3019 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 7. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER) | |
| 8. | 136-9699 | [1] | BRACKET AS | |
| 9. | 188-2501 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 10. | 215-1328 | [1] | HARNESS AS-ENGINE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8N-1518 | [1] | PLUG AS-CONNECTOR (25-PIN) | ||
| 8N-1525 | [1] | PLUG AS-CONNECTOR (20-PIN) | ||
| 8N-1535 | [1] | BELL AS-END | ||
| 8N-1521 | [1] | BELL AS-END | ||
| 8T-8737 | [49] | PLUG-SEAL | ||
| 7G-7917 | [11] | PLUG-SEAL | ||
| 11. | 194-5618 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 12. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (TURBOCHARGER INLET) | |
| 13. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 5K-3294 | [1] | CLIP | |
| 15. | 130-5300 | [4] | CLIP | |
| 16. | 6V-1889 | [3] | CLIP (LOOP) | |
| 17. | 3J-1907 | [1] | SEAL-O-RING | |
| 18. | 3K-0360 | [1] | SEAL-O-RING | |
| 19. | 4D-7794 | [2] | CLIP | |
| 20. | 4D-9517 | [1] | CLIP | |
| 21. | 124-1479 | [1] | CLIP | |
| 22. | 4P-7581 | [1] | CLIP (LADDER) | |
| 23. | 4P-8134 | [3] | CLIP (LADDER) | |
| 24. | 6D-3479 | [1] | CLIP (LOOP) | |
| 25. | 6D-4244 | [1] | CLIP (LOOP) | |
| 26. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 27. | 8M-2770 | [1] | CLIP (LOOP) | |
| 28. | 8M-2773 | [2] | CLIP (LOOP) | |
| 29. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 30. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 31. | 8T-4137 M | [10] | BOLT (M10X1.5X20-MM) | |
| 32. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 33. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 35. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 36. | 8T-9383 | [1] | BOLT (1/2-13X0.75-IN) | |
| 37. | 9X-8250 | [3] | CLIP | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34050176
210-1961: WIRING GP-ENGINE
210-1961 WIRING GP-ENGINE
S/N 3PD1-UP
PART OF 184-1158 ENGINE AR, 285-5777 ENGINE AR-COMPLETE
S/N 3PD1-UP
PART OF 184-1158 ENGINE AR, 285-5777 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-7077 | [1] | SPACER (0.406X0.62X0.37-IN THK) | |
| 2. | 3E-7448 | [1] | CONNECTOR | |
| 3. | 3S-2093 | [10] | STRAP-CABLE | |
| 4. | 9X-0262 | [2] | ADAPTER | |
| 5. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 5A. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD) | |
| 6. | 197-8392 Y | [1] | SENSOR GP-TEMPERATURE (WATER, COOLANT) | |
| 7. | 197-8393 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 8. | 197-8394 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 8A. | 197-8394 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 9. | 197-8395 Y | [1] | SENSOR GP-PRESSURE (AIR INLET MANIFOLD) | |
| 10. | 197-8396 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT TIMING) | |
| 11. | 197-8397 Y | [1] | SENSOR GP-SPEED (CAMSHAFT TIMING) | |
| 12. | 218-4604 | [1] | HARNESS AS-SENSOR (FUEL PRESSURE SENSOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS & WEDGE AND INTERFACE SEAL) | ||||
| 13. | 218-4605 | [1] | HARNESS AS (FUEL TEMPERATURE SENSOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE AND INTERFACE SEAL) | ||||
| 14. | 222-4086 | [1] | HARNESS AS (ENGINE ELECTRONIC) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE AND INTERFACE SEAL) | ||||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE AND INTERFACE SEAL) | ||||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDE PLUG AS & WEDGE AND INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 9X-1386 E | SLEEVE (25-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 15. | 134-3988 | [1] | CLIP (LOOP) | |
| 16. | 183-4403 | [2] | CLIP (LOOP) | |
| 17. | 2V-3216 | [1] | CLIP (LOOP) | |
| 18. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 19. | 4D-7794 | [1] | CLIP | |
| 20. | 5P-9085 | [1] | CLIP (LOOP) | |
| 21. | 4P-7581 | [2] | CLIP (LADDER) | |
| 22. | 4P-8134 | [2] | CLIP (LADDER) | |
| 23. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 24. | 6V-4369 | [1] | CLIP | |
| 25. | 6V-5048 | [3] | SEAL-O-RING | |
| 26. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 27. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 28. | 6V-6317 M | [2] | BOLT (M10X1.5X20-MM) | |
| 29. | 6V-7981 M | [1] | BOLT (M10X1.5X70-MM) | |
| 30. | 6V-8214 M | [2] | BOLT (M6X1X20-MM) | |
| 31. | 6V-8837 M | [1] | BOLT (M6X1X16-MM) | |
| 32. | 7K-1181 | [1] | STRAP-CABLE | |
| 33. | 8J-1256 | [2] | CLIP (LOOP) | |
| 35. | 8M-2771 | [1] | CLIP | |
| 36. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 37. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| 38. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34050177
189-6460: WIRING GP-MACHINE
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 4L-1263 | [4] | NUT-SPACER (3/8-16-THD) | |
| 3. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 4. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 5. | 9V-9311 | [1] | BRACKET | |
| 6. | 9X-6772 | [24] | STRAP-CABLE | |
| 7. | 172-8660 Y | [1] | SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK) | |
| 8. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (HYDRAULIC OIL) | |
| 9. | 131-0359 | [1] | PLATE-IDENTIFICATION (ENGINE STOP, RUN) | |
| 10. | 142-3331 | [1] | BRACKET AS | |
| 11. | 158-6634 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 12. | 163-1201 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 13. | 164-7577 Y | [1] | SWITCH GP-BYPASS (POWER TRAIN OIL FILTER) | |
| 14. | 172-9389 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 15. | 174-4312 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 16. | 174-7875 | [1] | HORN AS (24-VOLT, HIGH TONE) | |
| 17. | 175-3244 | [1] | SWITCH AS-PRESSURE (SERVICE BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 18. | 189-6461 Y | [1] | WIRING GP-RELAY PANEL | |
| 19. | 215-9686 | [1] | HARNESS AS-CHASSIS (CAB FLOOR PEDALS) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 20. | 215-9687 | [1] | HARNESS AS-CHASSIS (HORN, BYPASS SW, FUEL SENDER) | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 21. | 192-3783 | [1] | HARNESS AS-CHASSIS (HORN, RH, HYDRAULIC TANK) | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 155-2273 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 22. | 192-3785 | [1] | HARNESS AS-CHASSIS (FIREWALL) | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 23. | 205-5723 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 24. | 033-8248 | [2] | CLIP (LOOP) | |
| 25. | 115-3072 | [2] | CLIP AS-CONNECTING (8-PIN) | |
| 26. | 130-5300 | [14] | CLIP | |
| 27. | 130-5301 | [1] | CLIP | |
| 28. | 2M-9780 | [1] | SEAL-O-RING | |
| 29. | 3D-2824 | [1] | SEAL-O-RING | |
| 30. | 3J-1907 | [2] | SEAL-O-RING | |
| 31. | 3K-0360 | [1] | SEAL-O-RING | |
| 32. | 4D-7388 | [1] | CLIP (LOOP) | |
| 33. | 4D-7794 | [6] | CLIP | |
| 34. | 4P-8134 | [1] | CLIP (LADDER) | |
| 35. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 36. | 4P-7428 | [1] | CLIP (LADDER) | |
| 37. | 4S-1962 | [2] | CLIP (LOOP) | |
| 38. | 4S-4455 | [1] | CLIP | |
| 39. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 40. | 5P-7854 | [1] | CLIP | |
| 41. | 5P-9085 | [2] | CLIP (LOOP) | |
| 42. | 3S-2093 | [1] | STRAP-CABLE | |
| 43. | 6D-4246 | [3] | CLIP (LOOP) | |
| 44. | 6K-8178 | [1] | CLIP (LOOP) | |
| 45. | 6V-1889 | [4] | CLIP (LOOP) | |
| 46. | 6V-3964 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 47. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 48. | 6V-8801 | [24] | NUT (3/8-16-THD) | |
| 49. | 8M-2770 | [5] | CLIP (LOOP) | |
| 50. | 8M-2772 | [1] | CLIP (LOOP) | |
| 51. | 8T-0276 M | [4] | BOLT (M8X1.25X45-MM) | |
| 52. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 53. | 8T-4121 | [21] | WASHER-HARD (11X21X2.5-MM THK) | |
| 54. | 8T-4133 M | [7] | NUT (M10X1.5-THD) | |
| 55. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 56. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 57. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 58. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 59. | 8T-4896 | [33] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 61. | 9M-8406 | [11] | CLIP (LOOP) | |
| 62. | 9X-8250 | [1] | CLIP | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34050178
189-6460: WIRING GP-MACHINE
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [1] | STRAP-CABLE | |
| 3. | 4L-1263 | [4] | NUT-SPACER (3/8-16-THD) | |
| 4. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 5. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 6. | 9X-6772 | [24] | STRAP-CABLE | |
| 7. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (HYDRAULIC OIL) | |
| 8. | 131-0359 | [1] | PLATE-IDENTIFICATION (ENGINE STOP, RUN) | |
| 9. | 142-3331 | [1] | BRACKET AS | |
| 10. | 158-6634 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 11. | 163-1201 C | [2] | HORN AS (24-VOLT, LOW TONE) | |
| 12. | 164-7577 Y | [1] | SWITCH GP-BYPASS (POWER TRAIN OIL FILTER) | |
| 13. | 172-8660 Y | [1] | SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK) | |
| 14. | 172-9389 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 15. | 174-4312 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 16. | 174-7875 C | [2] | HORN AS (24-VOLT, HIGH TONE) | |
| 17. | 175-3244 | [1] | SWITCH AS-PRESSURE (SERVICE BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 18. | 189-6461 Y | [1] | WIRING GP-RELAY PANEL | |
| 19. | 192-3785 | [1] | HARNESS AS-CHASSIS (FIREWALL) | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 20. | 205-5723 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 21. | 215-9686 | [1] | HARNESS AS-CHASSIS (CAB FLOOR PEDALS) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 22. | 240-6792 C | [1] | BRACKET | |
| 23. | 246-2355 C | [1] | HARNESS AS-HYDRAULIC TANK (HORNS, OIL LEVEL, TEMP SENSORS) | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 24. | 246-2356 C | [1] | HARNESS AS-CHASSIS (HORN, BYPASS SW, FUEL SENDER) | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 25. | 247-4866 C | [1] | PLATE AS | |
| 26. | 033-8248 | [2] | CLIP (LOOP) | |
| 27. | 115-3072 | [2] | CLIP AS-CONNECTING (8-PIN) | |
| 28. | 130-5300 | [14] | CLIP | |
| 29. | 130-5301 | [1] | CLIP | |
| 30. | 2M-9780 | [1] | SEAL-O-RING | |
| 31. | 3D-2824 | [1] | SEAL-O-RING | |
| 32. | 3J-1907 | [2] | SEAL-O-RING | |
| 33. | 3K-0360 | [1] | SEAL-O-RING | |
| 34. | 4D-7388 | [1] | CLIP (LOOP) | |
| 35. | 4D-7794 C | [5] | CLIP | |
| 36. | 4L-6454 C | [4] | BOLT (3/8-16X1-IN) | |
| 37. | 4P-7428 | [1] | CLIP (LADDER) | |
| 38. | 4P-8134 | [1] | CLIP (LADDER) | |
| 39. | 4S-1962 | [2] | CLIP (LOOP) | |
| 40. | 4S-4455 | [1] | CLIP | |
| 41. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 42. | 5P-7854 | [1] | CLIP | |
| 43. | 5P-9085 | [2] | CLIP (LOOP) | |
| 44. | 6D-4246 | [3] | CLIP (LOOP) | |
| 45. | 6K-8178 | [1] | CLIP (LOOP) | |
| 46. | 6V-1889 | [4] | CLIP (LOOP) | |
| 47. | 6V-3964 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 48. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 49. | 6V-8801 | [24] | NUT (3/8-16-THD) | |
| 50. | 8M-2770 | [5] | CLIP (LOOP) | |
| 51. | 8M-2772 | [1] | CLIP (LOOP) | |
| 52. | 8T-0276 M | [4] | BOLT (M8X1.25X45-MM) | |
| 53. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 54. | 8T-4121 | [21] | WASHER-HARD (11X21X2.5-MM THK) | |
| 55. | 8T-4133 M | [7] | NUT (M10X1.5-THD) | |
| 56. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 57. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 58. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 59. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 60. | 8T-4896 C | [36] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 61. | 9M-8406 | [11] | CLIP (LOOP) | |
| 62. | 9X-8250 | [1] | CLIP | |
| 63. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 64. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34050179
189-6459: WIRING GP-REAR
For full view, you need register
Parts for your 816F LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 | [3] | STRAP-CABLE | |
| 2. | 192-1267 | [1] | HARNESS AS-REAR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 3. | 033-8248 | [8] | CLIP (LOOP) | |
| 4. | 5P-7648 | [2] | GROMMET | |
| 5. | 5P-9299 | [1] | CLIP (LOOP) | |
| 6. | 6D-3479 | [2] | CLIP (LOOP) | |
| 7. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 8. | 7X-4780 | [4] | GROMMET | |
| 9. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 12. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
Troubleshooting
Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Service Magazine
