AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GPFUEL SYSTEM
TANK GP-FUELDRAIN GP-FUEL
FILTER GP-FUEL
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
#SEBP34080140
196-5946: TURBOCHARGER GP
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34080141
113-9500: ADAPTER GP-FAST FILL FUEL
113-9500 ADAPTER GP-FAST FILL FUEL
S/N AXG1-UP
S/N AXG1-UP
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2G-9000 Y | [1] | VALVE AS-TANK (FAST FILL FUEL) | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 101-8909 | [1] | CAP AS-FILLER (FAST FILL FUEL) | ||
| 9D-0630 | [1] | CAP-DUST | ||
| 9M-2904 | [1] | CLAMP-HOSE | ||
| 1S-0833 | [2] | CLIP | ||
| 5P-6007 BD | TUBE | |||
| 6G-7803 | [1] | VENT AS | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34080142
242-8365: ADAPTER GP-FAST FILL FUEL
242-8365 ADAPTER GP-FAST FILL FUEL
S/N AXG1-UP
S/N AXG1-UP
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34080143
242-8946: ADAPTER GP-FAST FILL FUEL
242-8946 ADAPTER GP-FAST FILL FUEL
S/N AXG1-UP
S/N AXG1-UP
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 101-8909 | [1] | CAP AS-FILLER (FAST FILL FUEL) | ||
| 9X-8600 | [1] | SEAL-O-RING | ||
| 9D-0630 | [1] | CAP-DUST | ||
| 9M-2904 | [1] | CLAMP-HOSE | ||
| 1S-0833 | [2] | CLIP | ||
| 9X-2359 G | HOSE (55.12-IN) | |||
| 217-5703 | [1] | RECEIVER (FAST FILL FUEL) | ||
| 6G-7803 J | [1] | VENT AS | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 5T-8645 JN | [1] | KIT-VENT (FUEL TANK) | ||
| KIT INCLUDES BALLCAGE,CLAMP,BODY SEAL,HOLLOW BALL,SOLID BALL,ROLL PIN,SCREEN,VALVE SEAL,COVER,O-RINGS,INSTRUCTION SHEET | ||||
| 272-1595 JL | [1] | KIT-VENT (FUEL TANK) | ||
| KIT INCLUDES BODYSEAL,SCREEN,SEAL,CLAMP,BALL CAGE,COVER,O-RINGS,SOLID BALL,HOLLOW BALL,SPRING PIN,INSTRUCTION SHEET | ||||
| G | ORDER BY THE INCH | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | VENT KIT FOR COMPOSITE PLASTIC FLAT TOP | |||
| M | METRIC PART | |||
| N | VENT KIT FOR CAST ALUMINUM DOME TOP | |||
#SEBP34080144
210-9056: DRAIN GP-FUEL
210-9056 DRAIN GP-FUEL
S/N AXG1-UP
DRAIN HOSES FOR THE FUEL SYSTEM
PART OF 171-3028 INSTALLATION AR-ENGINE
S/N AXG1-UP
DRAIN HOSES FOR THE FUEL SYSTEM
PART OF 171-3028 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34080145
199-3228: FILTER & MTG GP-FUEL
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0762 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY) | |
| 2. | 1W-3011 | [1] | SPACER (10.5X22X73.5-MM THK) | |
| 3. | 3S-2093 | [5] | STRAP-CABLE | |
| 4. | 8T-9655 | [6] | MOUNT-ISOLATION | |
| 5. | 101-3120 | [3] | SPACER (10.5X25X20-MM THK) | |
| 6. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP ON/OFF) | |
| 7. | 174-7599 | [1] | BASE AS-FUEL FILTER | |
| 7A. | 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | |
| 8. | 180-6356 | [1] | BRACKET | |
| 9. | 190-8977 Y | [1] | PUMP GP-FUEL PRM & WATER SEP (PRIMARY) | |
| 10. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 11. | 191-1783 | [2] | SPACER (8.5X12.7X87.3-MM THK) | |
| 12. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 13. | 199-3227 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4K-9097 | [1] | NUT-WELD (5/16-18-THD) | ||
| 14. | 200-2655 | [1] | HARNESS AS-PUMP (FUEL PRIMING) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 15. | 201-4340 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 16. | 030-7947 | [1] | ADAPTER-ELBOW | |
| 17. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 19. | 0S-1617 | [2] | BOLT (5/16-18X0.75-IN) | |
| 20. | 130-5300 | [4] | CLIP | |
| 21. | 141-8275 | [1] | VALVE-DRAIN (FUEL) | |
| 22. | 183-3408 | [4] | PLUG AS | |
| 23. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 24. | 1C-2251 | [1] | BOLT (3/8-16X1.87-IN) | |
| 25. | 1D-4539 | [1] | BOLT (5/16-18X2.5-IN) | |
| 26. | 2A-4639 | [2] | BOLT (3/8-16X1.625-IN) | |
| 27. | 2R-6806 | [1] | CONNECTOR | |
| 28. | 3H-5932 | [2] | BOLT (5/16-18X4.5-IN) | |
| 29. | 4P-7581 | [2] | CLIP (LADDER) | |
| 30. | 4P-8134 | [3] | CLIP (LADDER) | |
| 31. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 32. | 5P-1404 | [1] | ADAPTER | |
| 33. | 6K-3607 | [1] | CONNECTOR | |
| 34. | 6V-0484 | [1] | ELBOW | |
| 35. | 6V-4589 | [2] | SEAL-O-RING | |
| 36. | 6V-5048 | [1] | SEAL-O-RING | |
| 37. | 6V-5049 | [5] | SEAL-O-RING | |
| 38. | 7X-0613 | [3] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 39. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 40. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 41. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 42. | 9X-0261 | [1] | ADAPTER | |
| 43. | 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34080146
199-3228: FILTER & MTG GP-FUEL
199-3228 FILTER & MTG GP-FUEL
S/N BET6103-13282
PART OF 213-1942, 235-4691 ENGINE AR-COMPLETE
S/N BET6103-13282
PART OF 213-1942, 235-4691 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0762 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY) | |
| 2. | 1W-3011 | [1] | SPACER (10.5X22X73.5-MM THK) | |
| 3. | 3S-2093 | [5] | STRAP-CABLE | |
| 4. | 6V-2611 C | [1] | VALVE (DRAIN)(SHUTOFF) | |
| 5. | 8T-9655 C | [8] | MOUNT-ISOLATION | |
| 6. | 101-3120 | [3] | SPACER (10.5X25X20-MM THK) | |
| 7. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP ON/OFF) | |
| 8. | 174-7599 | [1] | BASE AS-FUEL FILTER | |
| 8A. | 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | |
| 9. | 190-8977 Y | [1] | PUMP GP-FUEL PRM & WATER SEP (ELECTRIC) | |
| 10. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 11. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 12. | 199-3227 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4K-9097 | [1] | NUT-WELD (5/16-18-THD) | ||
| 13. | 200-2655 | [1] | HARNESS AS-PUMP (FUEL PRIMING) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 201-4340 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 15. | 205-3079 C | [1] | ADAPTER | |
| 16. | 209-7659 | [1] | PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF) | |
| 17. | 232-1374 C | [1] | BRACKET | |
| 18. | 232-1376 C | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 19. | 030-7947 | [1] | ADAPTER-ELBOW | |
| 20. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 21. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 22. | 109-3206 C | [1] | SEAL-O-RING | |
| 23. | 130-5300 | [3] | CLIP | |
| 24. | 183-3408 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-5049 | [1] | SEAL-O-RING | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 25. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 26. | 1C-2251 | [1] | BOLT (3/8-16X1.87-IN) | |
| 27. | 1D-4539 | [1] | BOLT (5/16-18X2.5-IN) | |
| 28. | 2A-4639 | [2] | BOLT (3/8-16X1.625-IN) | |
| 29. | 2R-6806 | [1] | CONNECTOR | |
| 30. | 4F-3508 C | [2] | BOLT (5/16-18X6.5-IN) | |
| 31. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 4P-8134 | [3] | CLIP (LADDER) | |
| 33. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 34. | 5P-1404 | [1] | ADAPTER | |
| 35. | 6K-3607 | [1] | CONNECTOR | |
| 36. | 6V-0484 | [1] | ELBOW | |
| 37. | 6V-4589 | [2] | SEAL-O-RING | |
| 38. | 6V-5048 | [1] | SEAL-O-RING | |
| 39. | 6V-5049 | [5] | SEAL-O-RING | |
| 40. | 7X-0613 | [3] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 41. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 42. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 43. | 9X-0261 | [1] | ADAPTER | |
| 44. | 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34080147
199-3228: FILTER & MTG GP-FUEL
199-3228 FILTER & MTG GP-FUEL
S/N BET13283-13345
PART OF 235-4691 ENGINE AR-COMPLETE
S/N BET13283-13345
PART OF 235-4691 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0762 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY) | |
| 2. | 1W-3011 | [1] | SPACER (10.5X22X73.5-MM THK) | |
| 3. | 3S-2093 | [5] | STRAP-CABLE | |
| 4. | 260-9236 C | [1] | VALVE AS-BALL (SHUTOFF) | |
| 260-9234 | [1] | VALVE-SHUTOFF | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 5. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 6. | 101-3120 | [3] | SPACER (10.5X25X20-MM THK) | |
| 7. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP ON/OFF) | |
| 8. | 174-7599 | [1] | BASE AS-FUEL FILTER | |
| 8A. | 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | |
| 9. | 190-8977 Y | [1] | PUMP GP-FUEL PRM & WATER SEP (ELECTRIC) | |
| 10. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 11. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 12. | 199-3227 | [1] | BRACKET AS | |
| 1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
| 4K-9097 | [5] | NUT-WELD (5/16-18-THD) | ||
| 13. | 200-2655 | [1] | HARNESS AS-PUMP (FUEL PRIMING) | |
| 114-8843 | SLEEVE-PLASTIC (100-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 201-4340 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 16. | 209-7659 | [1] | PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF) | |
| 17. | 232-1374 | [1] | BRACKET | |
| 18. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 19. | 030-7947 | [1] | ADAPTER-ELBOW | |
| 20. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 21. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 23. | 130-5300 | [3] | CLIP | |
| 24. | 183-3408 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-5049 | [1] | SEAL-O-RING | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 25. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 26. | 1C-2251 | [1] | BOLT (3/8-16X1.87-IN) | |
| 27. | 1D-4539 | [1] | BOLT (5/16-18X2.5-IN) | |
| 28. | 2A-4639 | [2] | BOLT (3/8-16X1.625-IN) | |
| 29. | 2R-6806 | [1] | CONNECTOR | |
| 30. | 4F-3508 | [2] | BOLT (5/16-18X6.5-IN) | |
| 31. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 4P-8134 | [3] | CLIP (LADDER) | |
| 33. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 34. | 5P-1404 | [1] | ADAPTER | |
| 35. | 6K-3607 | [1] | CONNECTOR | |
| 36. | 6V-0484 | [1] | ELBOW | |
| 37. | 6V-4589 | [2] | SEAL-O-RING | |
| 38. | 6V-5048 | [1] | SEAL-O-RING | |
| 39. | 6V-5049 | [4] | SEAL-O-RING | |
| 40. | 7X-0613 | [3] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 41. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 42. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 43. | 9X-0261 | [1] | ADAPTER | |
| 44. | 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 45. | 0S-1617 C | [1] | BOLT (5/16-18X0.75-IN) | |
| 46. | 9M-1974 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34080148
199-3228: FILTER & MTG GP-FUEL
199-3228 FILTER & MTG GP-FUEL
S/N BET13346-13369
PART OF 235-4691 ENGINE AR-COMPLETE
S/N BET13346-13369
PART OF 235-4691 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0762 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY) | |
| 2. | 1W-3011 | [1] | SPACER (10.5X22X73.5-MM THK) | |
| 3. | 3S-2093 | [5] | STRAP-CABLE | |
| 4. | 260-9236 | [1] | VALVE AS-BALL (SHUTOFF) | |
| 260-9234 | [1] | VALVE-SHUTOFF | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 5. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 6. | 101-3120 | [3] | SPACER (10.5X25X20-MM THK) | |
| 7. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP ON/OFF) | |
| 8. | 174-7599 | [1] | BASE AS-FUEL FILTER | |
| 8A. | 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | |
| 9. | 190-8977 Y | [1] | PUMP GP-FUEL PRM & WATER SEP (ELECTRIC) | |
| 10. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 11. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 12. | 199-3227 | [1] | BRACKET AS | |
| 1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
| 4K-9097 | [5] | NUT-WELD (5/16-18-THD) | ||
| 13. | 200-2655 | [1] | HARNESS AS-PUMP (FUEL PRIMING) | |
| 114-8843 | SLEEVE-PLASTIC (100-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 201-4340 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 16. | 209-7659 | [1] | PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF) | |
| 17. | 232-1374 | [1] | BRACKET | |
| 18. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 19. | 191-7805 C | [1] | ELBOW AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 030-7947 | [1] | ADAPTER-ELBOW | ||
| 20. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 21. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 23. | 130-5300 | [3] | CLIP | |
| 24. | 183-3408 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 214-7568 | [1] | SEAL-O-RING | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 25. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 26. | 1C-2251 | [1] | BOLT (3/8-16X1.87-IN) | |
| 27. | 1D-4539 | [1] | BOLT (5/16-18X2.5-IN) | |
| 28. | 2A-4639 | [2] | BOLT (3/8-16X1.625-IN) | |
| 29. | 186-1667 C | [1] | CONNECTOR AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 2R-6806 | [1] | CONNECTOR | ||
| 30. | 4F-3508 | [2] | BOLT (5/16-18X6.5-IN) | |
| 31. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 4P-8134 | [3] | CLIP (LADDER) | |
| 33. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 34. | 5P-1404 | [1] | ADAPTER | |
| 35. | 6K-3607 | [1] | CONNECTOR | |
| 36. | 6V-0484 | [1] | ELBOW | |
| 37. | 6V-4589 | [2] | SEAL-O-RING | |
| 38. | 6V-5048 | [1] | SEAL-O-RING | |
| 39. | 214-7568 C | [2] | SEAL-O-RING | |
| 40. | 7X-0613 | [3] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 41. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 42. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 43. | 9X-0261 | [1] | ADAPTER | |
| 44. | 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 45. | 0S-1617 | [1] | BOLT (5/16-18X0.75-IN) | |
| 46. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34080149
199-3228: FILTER & MTG GP-FUEL
199-3228 FILTER & MTG GP-FUEL
S/N BET13370-UP
PART OF 235-4691 ENGINE AR-COMPLETE
S/N BET13370-UP
PART OF 235-4691 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0762 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY) | |
| 2. | 1W-3011 | [1] | SPACER (10.5X22X73.5-MM THK) | |
| 3. | 3S-2093 | [5] | STRAP-CABLE | |
| 4. | 260-9236 | [1] | VALVE AS-BALL (SHUTOFF) | |
| 260-9234 | [1] | VALVE-SHUTOFF | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 5. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 6. | 101-3120 | [3] | SPACER (10.5X25X20-MM THK) | |
| 7. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP ON/OFF) | |
| 8. | 174-7599 | [1] | BASE AS-FUEL FILTER | |
| 8A. | 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | |
| 9. | 190-8977 Y | [1] | PUMP GP-FUEL PRM & WATER SEP (ELECTRIC) | |
| 10. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 11. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 12. | 199-3227 | [1] | BRACKET AS | |
| 1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
| 4K-9097 | [5] | NUT-WELD (5/16-18-THD) | ||
| 13. | 200-2655 | [1] | HARNESS AS-PUMP (FUEL PRIMING) | |
| 114-8843 E | SLEEVE-PLASTIC (100-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 201-4340 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 16. | 305-3684 C | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | |
| 17. | 232-1374 | [1] | BRACKET | |
| 18. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 19. | 191-7805 | [1] | ELBOW AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 030-7947 | [1] | ADAPTER-ELBOW | ||
| 20. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 21. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 23. | 130-5300 | [3] | CLIP | |
| 24. | 183-3408 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 214-7568 | [1] | SEAL-O-RING | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 25. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 26. | 1C-2251 | [1] | BOLT (3/8-16X1.87-IN) | |
| 27. | 1D-4539 | [1] | BOLT (5/16-18X2.5-IN) | |
| 28. | 2A-4639 | [2] | BOLT (3/8-16X1.625-IN) | |
| 29. | 186-1667 | [1] | CONNECTOR AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 2R-6806 | [1] | CONNECTOR | ||
| 30. | 4F-3508 | [2] | BOLT (5/16-18X6.5-IN) | |
| 31. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 4P-8134 | [3] | CLIP (LADDER) | |
| 33. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 34. | 5P-1404 | [1] | ADAPTER | |
| 35. | 6K-3607 | [1] | CONNECTOR | |
| 36. | 6V-0484 | [1] | ELBOW | |
| 37. | 6V-4589 | [2] | SEAL-O-RING | |
| 38. | 6V-5048 | [1] | SEAL-O-RING | |
| 39. | 214-7568 | [2] | SEAL-O-RING | |
| 40. | 7X-0613 | [3] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 41. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 42. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 43. | 9X-0261 | [1] | ADAPTER | |
| 44. | 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 45. | 0S-1617 | [1] | BOLT (5/16-18X0.75-IN) | |
| 46. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 980G II :
Truck sale:
53,500
54,500
49,500