234-9038 STARTING AR-COLD WEATHER S/N AXG1-UP PART OF 214-9391 CONVERSION AR-MACHINE 980G II WHEEL LOADER

Part No	Qty	Parts name
180-2435 Y	[1]	STARTING MOTOR GP-ELECTRIC
9X-3404	[4]	BATTERY GP (12-VOLT, MAINTENANCE FREE, WET)
213-2214	[1]	HARNESS AS-ENGINE
102-8802	[3]	KIT-RECEPTACLE (2-PIN)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8N-1517		RECEPTACLE AS-CONNECTOR (25-PIN)
8N-1522	[1]	NUT (2-1/4-16-THD)
8T-8737	[70]	PLUG-SEAL
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
155-2269	[6]	PLUG AS-CONNECTOR (2-PIN)
160-7689		PLUG AS-CONNECTOR (70-PIN)
159-9322	[1]	SEAL-O-RING
183-5784	[1]	PLUG AS-CONNECTOR (40-PIN)
3E-4367	[1]	RING-RETAINING
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP34080261

176-4264: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

176-4264 STARTING MOTOR GP-ELECTRIC
S/N AXG686-UP
24 VOLT
PART OF 171-3028 INSTALLATION AR-ENGINE

i01909860 SEBP3408

1764264 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4H-7869	[1]	GASKET
2.	203-3694	[1]	CABLE AS (STARTING MOTOR)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(26CM)
3.	207-1556 Y	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
4.	8S-2332	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	E		ORDER BY THE CENTIMETER
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34080262

180-2435: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

180-2435 STARTING MOTOR GP-ELECTRIC
S/N AXG1-685
PART OF 171-3028 INSTALLATION AR-ENGINE, 234-9038 STARTING AR-COLD WEATHER

i01537019 SEBP3408

1802435 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8S-2332	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
2.	338-3454 Y	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
3.	9Y-6089	[1]	GASKET (STARTING MOTOR)
4.	8Y-9603	[1]	CABLE AS-STARTING MOTOR
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(28-CM)
	E		ORDER BY THE CENTIMETER
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34080263

207-1556: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

207-1556 STARTING MOTOR GP-ELECTRIC
S/N AXG686-UP
24-VOLT
PART OF 176-4264 STARTING MOTOR GP-ELECTRIC

i01593340 SEBP3408

2071556 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-3434	[6]	PLUG
2.	7T-3279	[1]	HOUSING AS
3.	8T-8566	[1]	TERMINAL AS
4.	6V-8188	[4]	NUT (1/2-13-THD)
5.	7X-0562	[4]	WASHER-HARD (13.5X19X0.8-MM THK)
6.	3T-3422	[1]	WIRE AS
7.	7T-3278	[1]	HOLDER AS-BRUSH
8.	7T-3277	[1]	COIL AS-FIELD
9.	7T-3454	[1]	INSULATOR
10.	283-1107	[1]	KIT-CONNECTOR (STARTING MOTOR)
			(INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
11.	7T-3451	[1]	KIT-INSULATOR (STARTING MOTOR)
12.	8T-8569	[1]	INSULATOR-TERMINAL
13.	5S-7349	[4]	BOLT (1/4-20X0.5-IN)
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	8H-1141	[4]	SHOE-POLE
16.	3R-8797	[8]	SCREW & WASHER AS (3/8-24X0.72-IN)
17.	7T-3276	[1]	ARMATURE AS (24-VOLT)
18.	3E-7775	[1]	HOUSING AS
19.	4M-1831	[1]	PLUG-LEVER HOUSING
20.	7L-2894	[1]	GASKET
21.	0S-1597	[5]	BOLT (1/4-28X1-IN)
22.	6N-3826	[1]	DRIVE AS-MOTOR
23.	7T-3974	[1]	HOUSING AS-DRIVE
24.	7X-3373	[6]	BOLT (5/16-18X0.88-IN)
25.	548-9596	[1]	KIT-SOLENOID (24-VOLT)(INSULATED)
			(INCLUDES BOLT, NUTS, & CONNECTORS)
26.	6V-8378	[3]	NUT (10-32-THD)
27.	8F-1434	[2]	LOCKWASHER
28.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
29.	9X-4824	[1]	COVER-STARTING MOTOR
30.	8T-9884	[1]	KIT-INSULATOR (STARTING MOTOR)
			(INCLUDES INSULATORS & BUSHING)
31.	8C-3655	[1]	KIT-BRUSH (STARTING MOTOR)
			(INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES & SEAL)
32.	7T-3268	[1]	KIT-LEVER (STARTING MOTOR)
			(INCLUDES LEVER ASSEMBLIES, SEAL, NUT, GASKET & RETAINER)

			AVAILABLE REPAIR KIT(S):
	7T-3267	[1]	KIT-BUSHING (STARTING MOTOR)
			(INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER & NUT)

#SEBP34080264

338-3454: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC
S/N AXG1-685
24-VOLT
PART OF 180-2435 STARTING MOTOR GP-ELECTRIC

i03920474 SEBP3408

3383454 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	125-6535	[1]	COVER-STARTING MOTOR
14.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
15.	3L-3380	[1]	BUSHING-TERMINAL
16.	8C-3089	[1]	SEAL-O-RING
17.	4M-1853	[1]	LEVER AS-SHIFT
18.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
19.	7L-2894	[4]	GASKET
20.	4M-1831	[4]	PLUG-LEVER HOUSING
21.	4M-1854	[1]	SHAFT-LEVER
22.	1H-1023	[1]	SEAL-O-RING
23.	2D-6392	[1]	SEAL-O-RING
24.	494-6475	[1]	HOUSING AS-DRIVE
25.	6N-3826	[1]	DRIVE AS-MOTOR
26.	2H-3429	[1]	RING-RETAINING
27.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
28.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
29.	6N-3279	[1]	INSULATOR
30.	0S-1597	[13]	BOLT (1/4-28X1-IN)
31.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
32.	1H-2629	[3]	STRIP-INSULATION
33.	7M-0324	[1]	COIL AS-FIELD
34.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
35.	7F-3488	[6]	SHOE-POLE
36.	7M-8651	[1]	ARMATURE AS
37.	7M-0325	[1]	INSULATOR
38.	3T-9524	[6]	BRUSH AS
39.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES BUSHINGS & WASHERS)
40.	338-3453	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
40A.	3R-8801	[1]	CLAMP
42.	8F-1434	[2]	LOCKWASHER
43.	6V-8188	[6]	NUT (1/2-13-THD)
44.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
45.	4B-2049	[6]	NUT (10-32-THD)
46.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
47.	3T-9494	[6]	SPRING
48.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
49.	9G-4101	[1]	BUSHING-END
50.	3T-3424	[3]	PLUG-FELT
51.	3T-3423	[3]	CUP
52.	1M-9968	[1]	BUSHING
53.	2F-6678	[1]	SEAL-LIP TYPE
54.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
55.	4M-1896	[1]	BUSHING-TERMINAL
56.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP34080265

164-7577: SWITCH GP-BYPASS

SWITCH GP-BYPASS

164-7577 SWITCH GP-BYPASS -POWER TRAIN OIL FILTER
S/N AXG1-UP
PART OF 175-4211 WIRING GP-MACHINE

i01256326 SEBP3408

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-1813 BE		SLEEVE
2.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
5.	3D-2824	[1]	SEAL-O-RING
6.	Z	[1]	SWITCH AS
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	Z		NOT SERVICED SEPARATELY

#SEBP34080266

197-6475: SWITCH GP-DIMMER

SWITCH GP-DIMMER

197-6475 SWITCH GP-DIMMER -ROADING
S/N AXG1-UP

i01538195 SEBP3408

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2H-1855	[1]	SWITCH AS-FOOT (ROADING)
	6V-8362	[3]	SCREW-MACHINE (8-32X0.31-IN)
	9B-7233	[3]	LOCKWASHER
2.	121-8039	[1]	WIRE AS
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-5624 D	[1]	WIRE (14-GA, BLACK)(.6M)
3.	5S-7349	[3]	BOLT (1/4-20X0.5-IN)
4.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
	D		ORDER BY THE METER

#SEBP34080267

7N-0718: SWITCH GP-DISCONNECT

SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N AXG1-UP
PART OF 193-1745 BATTERY & WIRING GP

i00187759 SEBP3408

7N0718 SWITCH GP-DISCONNECT Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8H-5306	[1]	KEY (BATTERY DISCONNECT)
2.	8H-5303	[1]	NUT (3/4-16-THD)
3.	2H-3922	[2]	LOCKWASHER
4.	9F-5644	[2]	LOCKWASHER
5.	6F-7045	[2]	NUT-FULL (3/8-24-THD)

#SEBP34080268

172-8660: SWITCH GP-LIQUID LEVEL

SWITCH GP-LIQUID LEVEL

172-8660 SWITCH GP-LIQUID LEVEL -HYDRAULIC TANK
S/N AXG1-UP
PART OF 175-4211 WIRING GP-MACHINE

i02084164 SEBP3408

1728660 SWITCH GP-LIQUID LEVEL Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	9X-1386 E		SLEEVE (30-CM)
	E		ORDER BY THE CENTIMETER

#SEBP34080269

125-1302: SWITCH GP-MAGNETIC

SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC -START RELAY
S/N AXG1-UP
24-VOLT
PART OF 219-9757 PANEL GP-CIRCUIT BREAKER, 174-7067 WIRING GP-RELAY PANEL

i00526676 SEBP3408

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	1H-3338	[2]	LOCKWASHER
4.	3B-4504	[2]	LOCKWASHER
5.	5C-2890 M	[2]	NUT (M6X1-THD)
6.	9X-1813 E		SLEEVE (16-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART