ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP34080290
205-1812: WIRING GP-COMMUNICATION
205-1812 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N AXG1-UP
PART OF 205-1809 INSTALLATION AR-COMMUNICATION
S/N AXG1-UP
PART OF 205-1809 INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-3235 | [1] | HARNESS AS-CONTROL (PRODUCT LINK) | |
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 2. | 033-8248 | [2] | CLIP (LOOP) | |
| 3. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
#SEBP34080291
175-4207: WIRING GP-ELECTROHYDRAULIC
175-4207 WIRING GP-ELECTROHYDRAULIC
S/N AXG1-868
PART OF 206-9057, 206-9058, 206-9059, 206-9060 VALVE & MTG GP-MAIN CONTROL
S/N AXG1-868
PART OF 206-9057, 206-9058, 206-9059, 206-9060 VALVE & MTG GP-MAIN CONTROL
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 2. | 7K-1181 C | [5] | STRAP-CABLE | |
| 3. | 213-2208 C | [1] | HARNESS AS-VALVE (OIL MANIFOLD, ELECTROHYDRAULIC) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE) | ||||
| 4. | 130-5300 | [2] | CLIP | |
| 5. | 4D-9517 C | [1] | CLIP | |
| 6. | 174-5907 C | [1] | CLIP (LOOP) | |
| 7. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP34080292
175-4207: WIRING GP-ELECTROHYDRAULIC
175-4207 WIRING GP-ELECTROHYDRAULIC
S/N AXG869-UP
PART OF 206-9057, 206-9058, 206-9059, 206-9060 VALVE & MTG GP-MAIN CONTROL
S/N AXG869-UP
PART OF 206-9057, 206-9058, 206-9059, 206-9060 VALVE & MTG GP-MAIN CONTROL
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 238-5643 C | [1] | HARNESS AS-VALVE (ELECTROHYDRAULIC CONTROL) | |
| 7K-1181 | [2] | STRAP-CABLE | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT-PLUG INCLUDES PLUG AS & WEDGE) | ||||
| 4. | 130-5300 | [2] | CLIP | |
| 5. | 4D-9517 | [1] | CLIP | |
| 6. | 174-5907 | [1] | CLIP (LOOP) | |
| 7. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP34080293
171-4408: WIRING GP-ELECTRONIC CONTROL
171-4408 WIRING GP-ELECTRONIC CONTROL
S/N BET1-UP
PART OF 213-1942 ENGINE AR-COMPLETE
S/N BET1-UP
PART OF 213-1942 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [28] | STRAP-CABLE | |
| 2. | 7T-0266 | [1] | BRACKET AS | |
| 3. | 176-0274 | [1] | HARNESS AS-ENGINE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (KIT INCLUDES PLUG AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (KIT INCLUDES PLUG AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (KIT INCLUDES PLUG AS & WEDGE) | ||||
| 4. | 196-1916 | [1] | BRACKET AS | |
| 5. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 6. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 7. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 8. | 0S-1617 | [1] | BOLT (5/16-18X0.75-IN) | |
| 9. | 130-5300 | [1] | CLIP | |
| 10. | 3B-1915 | [1] | BOLT (3/8-16X1.375-IN) | |
| 11. | 3S-8664 | [1] | CLIP (LOOP) | |
| 12. | 4K-8302 | [1] | CLIP (LOOP) | |
| 13. | 4P-7429 | [1] | CLIP (LADDER) | |
| 14. | 4P-7581 | [7] | CLIP (LADDER) | |
| 15. | 4P-8134 | [5] | CLIP (LADDER) | |
| 16. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
#SEBP34080294
222-0348: WIRING GP-ELECTRONIC CONTROL
222-0348 WIRING GP-ELECTRONIC CONTROL
S/N BET2568-UP
PART OF 213-1942, 235-4691 ENGINE AR-COMPLETE
S/N BET2568-UP
PART OF 213-1942, 235-4691 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [21] | STRAP-CABLE | |
| 2. | 176-0274 | [1] | HARNESS AS-ENGINE (ELECTRONIC CONTROL) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN)(ELEC CONTROL ENGINE HARNESS) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8803 | [4] | KIT-RECEPTACLE (3-PIN)(ELEC CONTROL ENGINE HARNESS) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN)(ELEC CONTROL ENGINE HARNESS) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN)(ELEC CONTROL ENGINE HARNESS) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 3. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 4. | 2H-3755 | [1] | BOLT (5/16-18X0.43-IN) | |
| 5. | 130-5300 | [1] | CLIP | |
| 6. | 3B-1915 | [1] | BOLT (3/8-16X1.375-IN) | |
| 7. | 3S-8664 | [1] | CLIP (LOOP) | |
| 8. | 4K-8302 | [1] | CLIP (LOOP) | |
| 9. | 4P-7429 | [1] | CLIP (LADDER) | |
| 10. | 4P-7581 | [5] | CLIP (LADDER) | |
| 11. | 4P-8134 | [3] | CLIP (LADDER) | |
| 12. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
#SEBP34080295
222-0349: WIRING GP-ELECTRONIC CONTROL
222-0349 WIRING GP-ELECTRONIC CONTROL
S/N AXG686-UP
PART OF 171-3028 INSTALLATION AR-ENGINE
S/N AXG686-UP
PART OF 171-3028 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 7T-0266 | [1] | BRACKET AS | |
| 3. | 196-1916 | [1] | BRACKET AS | |
| (EACH BRACKET AS INCLUDES) | ||||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 5. | 4P-7581 | [3] | CLIP (LADDER) | |
| 6. | 4P-8134 | [2] | CLIP (LADDER) | |
| 7. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 8. | 5S-7382 | [1] | BOLT (3/8-16X1.375-IN) | |
| 9. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 10. | 8T-4896 | [5] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
#SEBP34080296
193-0610: WIRING GP-ENGINE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 9V-3418 | [2] | ANGLE AS | |
| 3. | 9X-3495 | [1] | CLIP AS | |
| 4. | 119-4091 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 5. | 122-9008 | [1] | ANGLE AS | |
| 6. | 127-9323 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 7. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (TMSN LUBRICATION OIL) | |
| [1] | SENSOR AS-TEMPERATURE | |||
| 137-6645 | [11] | PAD-CONNECTOR | ||
| 8. | 131-0427 Y | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 9. | 133-8645 | [1] | BRACKET AS | |
| 10. | 138-4409 | [2] | SPACER (10.5X22X35-MM THK) | |
| 11. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (TURBO INLET) | |
| 12. | 163-5382 | [1] | SPACER (10.5X25X20-MM THK) | |
| 13. | 176-1703 | [1] | HARNESS AS-TRANSMISSION | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 6D-5256 | [1] | PLUG AS (14-PIN) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 14. | 193-0573 | [1] | HARNESS AS-ENGINE | |
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8N-1521 | [1] | BELL AS-END | ||
| 15. | 197-6453 | [1] | BRACKET AS | |
| 16. | 130-5300 | [3] | CLIP | |
| 17. | 1S-0994 | [1] | CLIP (LOOP) | |
| 18. | 2S-2053 | [2] | CLIP (LOOP) | |
| 19. | 3J-1907 | [2] | SEAL-O-RING | |
| 20. | 3K-0360 | [1] | SEAL-O-RING | |
| 21. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 22. | 5P-9085 | [4] | CLIP (LOOP) | |
| 23. | 5P-9297 | [1] | CLIP (LOOP) | |
| 24. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 25. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 26. | 6D-4244 | [3] | CLIP (LOOP) | |
| 27. | 6D-4246 | [1] | CLIP (LOOP) | |
| 28. | 7X-0343 | [1] | BOLT (5/8-11X1.25-IN) | |
| 29. | 8M-2770 | [3] | CLIP (LOOP) | |
| 30. | 8M-2773 | [5] | CLIP (LOOP) | |
| 31. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 32. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 33. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 34. | 8T-4896 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 35. | 8T-5360 | [1] | WASHER (12X22.5X2.5-MM THK) | |
| 36. | 8T-7008 | [2] | BOLT (3/8-16X3-IN) | |
| 37. | 8T-8916 | [1] | BOLT (7/16-14X1.5-IN) | |
| 38. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| 39. | 9M-8406 | [1] | CLIP (LOOP) | |
| 40. | 5S-7382 | [1] | BOLT (3/8-16X1.375-IN) | |
| 41. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 42. | 4K-8864 | [1] | CLIP (LOOP) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34080297
193-0610: WIRING GP-ENGINE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 8X-9391 C | [2] | BRACKET AS | |
| 3. | 9V-3418 | [2] | ANGLE AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 118-6878 C | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 118-7226 CY | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 6. | 118-7809 C | [1] | PLATE | |
| 7. | 119-4091 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 8. | 127-9323 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (TMSN LUBRICATION OIL) | |
| [1] | SENSOR AS-TEMPERATURE (TMSN LUBRICATION OIL) | |||
| 137-6645 | [11] | PAD-CONNECTOR | ||
| 10. | 133-8645 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 11. | 138-4409 | [2] | SPACER (10.5X22X35-MM THK) | |
| 12. | 192-5017 C | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 13. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (TURBO INLET) | |
| 14. | 197-6453 | [1] | BRACKET AS | |
| 15. | 203-5443 C | [1] | BRACKET AS | |
| 16. | 213-2213 C | [1] | HARNESS AS-TRANSMISSION | |
| 6D-5256 | [1] | PLUG AS (14-PIN) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 155-2269 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE | ||||
| 17. | 213-2214 C | [1] | HARNESS AS-ENGINE | |
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 155-2260 | [6] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 183-5784 | [1] | PLUG AS-CONNECTOR (40-PIN)(40 PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 18. | 0T-0102 C | [1] | BOLT (3/8-16X0.625-IN) | |
| 19. | 122-9008 | [1] | ANGLE AS | |
| 20. | 130-5300 C | [4] | CLIP | |
| 21. | 1F-5842 C | [1] | BOLT (5/16-18X3.25-IN) | |
| 22. | 1S-0994 C | [4] | CLIP (LOOP) | |
| 23. | 2S-2053 | [2] | CLIP (LOOP) | |
| 24. | 3J-1907 | [2] | SEAL-O-RING | |
| 25. | 3K-0360 | [1] | SEAL-O-RING | |
| 26. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 27. | 5P-9085 C | [2] | CLIP (LOOP) | |
| 28. | 5P-9297 | [1] | CLIP (LOOP) | |
| 29. | 5S-7379 C | [3] | BOLT (3/8-16X0.875-IN) | |
| 30. | 5S-7382 | [1] | BOLT (3/8-16X1.375-IN) | |
| 31. | 6D-4244 C | [5] | CLIP (LOOP) | |
| 32. | 6D-4246 C | [3] | CLIP (LOOP) | |
| 33. | 7X-0343 | [1] | BOLT (5/8-11X1.25-IN) | |
| 34. | 8M-2770 C | [5] | CLIP (LOOP) | |
| 35. | 8M-2773 C | [4] | CLIP (LOOP) | |
| 36. | 8T-4121 C | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 37. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 38. | 8T-4133 CM | [1] | NUT (M10X1.5-THD) | |
| 39. | 8T-4136 CM | [3] | BOLT (M10X1.5X25-MM) | |
| 40. | 8T-4137 CM | [8] | BOLT (M10X1.5X20-MM) | |
| 41. | 8T-4896 C | [13] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 42. | 8T-5360 C | [2] | WASHER (12X22.5X2.5-MM THK) | |
| 43. | 8T-7008 | [2] | BOLT (3/8-16X3-IN) | |
| 44. | 8T-8916 C | [2] | BOLT (7/16-14X1.5-IN) | |
| 45. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34080298
169-6428: WIRING GP-FRONT
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-6152 | [4] | CLAMP | |
| 2. | 5V-6153 | [2] | PLATE-COVER | |
| 3. | 7V-5515 | [1] | SPACER (11X26.7X12-MM THK) | |
| 4. | 213-2218 | [1] | HARNESS AS-FRONT CHASSIS | |
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 5. | 130-5300 | [2] | CLIP | |
| 6. | 1S-0994 | [4] | CLIP (LOOP) | |
| 7. | 4D-7794 | [6] | CLIP | |
| 8. | 4K-8864 | [3] | CLIP (LOOP) | |
| 9. | 5P-9085 | [4] | CLIP (LOOP) | |
| 10. | 5P-9297 | [1] | CLIP (LOOP) | |
| 11. | 6D-4246 | [1] | CLIP (LOOP) | |
| 12. | 8M-2770 | [7] | CLIP (LOOP) | |
| 13. | 8M-2773 | [2] | CLIP (LOOP) | |
| 14. | 8T-3844 M | [4] | BOLT (M6X1X70-MM) | |
| 15. | 8T-4121 | [23] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4137 M | [22] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 18. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP34080299
169-6428: WIRING GP-FRONT
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-6152 | [4] | CLAMP | |
| 2. | 5V-6153 | [2] | PLATE-COVER | |
| 3. | 7K-1181 C | [3] | STRAP-CABLE | |
| 4. | 7V-5515 | [1] | SPACER (11X26.7X12-MM THK) | |
| 5. | 234-1909 C | [1] | HARNESS AS-FRONT CHASSIS | |
| 102-8802 | [5] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [28] | PLUG-SEAL | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 155-2252 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2272 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 6. | 130-5300 C | [4] | CLIP | |
| 7. | 1S-0994 C | [3] | CLIP (LOOP) | |
| 8. | 4D-7794 | [6] | CLIP | |
| 9. | 4K-8864 C | [4] | CLIP (LOOP) | |
| 10. | 5P-9085 C | [5] | CLIP (LOOP) | |
| 11. | 5P-9297 | [1] | CLIP (LOOP) | |
| 12. | 6D-4246 | [1] | CLIP (LOOP) | |
| 13. | 8M-2770 C | [8] | CLIP (LOOP) | |
| 14. | 8M-2773 C | [1] | CLIP (LOOP) | |
| 15. | 8T-3844 M | [4] | BOLT (M6X1X70-MM) | |
| 16. | 8T-4121 C | [25] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4133 CM | [1] | NUT (M10X1.5-THD) | |
| 18. | 8T-4137 CM | [23] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 20. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 980G II :
Truck sale:
53,500
54,500
49,500