201-7993 ENGINE AR S/N CRJ1-UP 250 BRAKE KW (335 BHP) AT 2100 RPM. LH SERVICE PART OF 150-5300 GENERAL AR-PUMPER CPT372

Part No	Qty	Parts name
117-0176 Y	[1]	ADAPTER GP-ENGINE TO XMSN
133-7032 Y	[1]	AIR COMPRESSOR GP
171-3062 Y	[1]	CAMSHAFT GP
200-2310 Y	[1]	CONNECTION GP-ELECTRICAL
189-4670 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
117-2788 Y	[1]	COOLANT CONDITIONER GP
115-2990 Y	[1]	COOLER GP-ENGINE OIL
115-2985 Y	[1]	COVER GP-CYLINDER BLOCK
113-8987 Y	[1]	COVER GP-FRONT HOUSING
117-2786 Y	[1]	COVER GP-OIL FILTER BASE
132-3210 Y	[1]	CRANKSHAFT GP
115-2982 Y	[1]	CYLINDER BLOCK GP
132-3208 Y	[1]	CYLINDER HEAD GP
117-2766 Y	[1]	DAMPER GP
201-5195	[1]	ELECTRONICS GP-ENGINE RATINGS
123-0794 Y	[1]	FILTER AS-COOLANT CONDITIONER
117-2771 Y	[1]	FASTENER GP-DAMPER & PULLEY
117-2792 Y	[1]	FASTENER GP-OIL COOLER
124-2642 Y	[1]	FILLER GP-ENGINE OIL
116-1853 Y	[1]	FILTER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
116-5413 Y	[1]	FILTER GP-SECONDARY FUEL
117-0184 Y	[1]	FITTING GP-FUEL LINES (RETURN)
117-0183 Y	[1]	FITTING GP-FUEL LINES (SUPPLY)
124-2657 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
117-2750 Y	[1]	GEAR GP-FRONT
124-2660 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
189-4674 Y	[1]	LINES GP-FUEL INJECTION
115-9377 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
117-2778 Y	[1]	LINES GP-WATER (INLET ELBOW)
148-1997 Y	[1]	LINES GP-WATER (WATER MANIFOLD)
117-2688 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
136-4281 Y	[1]	BELT TENSIONER GP
117-2694 Y	[1]	MOUNTING GP-FAN DRIVE
138-2551 Y	[1]	MOUNTING GP-FAN DRIVE
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
117-2777 Y	[1]	PAN GP-OIL
117-2697 Y	[1]	PANEL GP-SOUND SUPPRESSION (OIL PAN)
132-3203 Y	[6]	PISTON & ROD GP
115-2984 Y	[1]	PLUG GP-CYLINDER BLOCK
117-0165 Y	[1]	PLUG GP-CYLINDER BLOCK (OIL GALLERY, END)
117-0185 Y	[1]	PLUG GP-CYLINDER BLOCK
138-2028 Y	[1]	PLUG GP-CYLINDER BLOCK
123-0782 Y	[1]	PLUG GP-FUEL LINES
117-2795 Y	[1]	PULLEY GP-CRANKSHAFT
117-2746 Y	[1]	PUMP GP-ENGINE OIL
189-0351 Y	[6]	PUMP GP-FUEL INJECTION
116-5411 Y	[1]	PUMP GP-FUEL PRIMING (HAND)
116-5428 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2674 Y	[1]	PUMP GP-WATER
124-2661 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
9Y-7129 Y	[1]	STARTING MOTOR GP-ELECTRIC
115-3004 Y	[1]	SUPPORT GP-ENGINE (FRONT)
192-2076 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
189-6593 Y	[1]	WIRING GP-ELECTRONIC CONTROL
189-6595 Y	[1]	WIRING GP-ELECTRONIC CONTROL
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR

		GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP34110002

117-0176: ADAPTER GP-ENGINE TO XMSN

ADAPTER GP-ENGINE TO XMSN

117-0176 ADAPTER GP-ENGINE TO XMSN
S/N CRJ1-UP
FOR USE WITH @@@@@124-2660@@@@@, @@@@@117-2766@@@@@
CANNOT BE USED WITH REAR POWER TAKE-OFF

i00490661 SEBP3411

1170176 ADAPTER GP-ENGINE TO XMSN Parts scheme

For full view, you need register

Parts for your CPT372 PUMPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-3476	[1]	ADAPTER-HOUSING
2.	7E-3478	[1]	GASKET
3.	287-2537	[8]	BOLT-SOCKET HEAD
4.	323-8752	[1]	PLATE AS-FLEXIBLE

#SEBP34110003

133-7032: AIR COMPRESSOR GP

AIR COMPRESSOR GP

133-7032 AIR COMPRESSOR GP
S/N CRJ1-UP
16.5 CFM, 1.14:1 RATIO
FOR USE WITH @@@@@117-0185@@@@@

i01105688 SEBP3411

For full view, you need register

Parts for your CPT372 PUMPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-5499	[1]	ELBOW
2.	8M-7065	[1]	GASKET (AIR INLET)
3.	9M-2904	[1]	CLAMP-HOSE
4.	9Y-1116 I	[1]	HOSE AS
5.	032-3631	[1]	ELBOW
6.	090-8635	[1]	SPACER (11X22X5-MM THK)
7.	126-0146	[1]	HOSE-FUMES DISPOSAL
8.	128-0331	[1]	HOSE
9.	129-2181	[1]	SEAL-INTEGRAL
10.	131-2171	[1]	CONNECTOR
11.	153-7062	[1]	BRACKET
12.	166-6352	[1]	TUBE AS
13.	005-0658	[1]	ELBOW-FLARED
13A.	6V-5063	[1]	SEAL-O-RING
14.	172-4702	[2]	CLAMP
15.	001-7043	[1]	ELBOW
16.	118-4728	[1]	ELBOW
17.	117-0221	[1]	RING-PILOT
18.	128-0420	[1]	GEAR (42-TEETH)
19.	164-7564 Y	[1]	AIR COMPRESSOR GP
20.	1W-0428 I	[1]	HOSE AS
21.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
22.	2S-2053	[1]	CLIP
23.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
24.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	5S-0003	[2]	NUT (5/16-18-THD)
26.	6D-4244	[1]	CLIP
27.	6M-7476	[1]	ELBOW
28.	6V-3251	[2]	SEAL-O-RING
29.	6V-4248 M	[3]	BOLT (M10X1.5X25-MM)
30.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
31.	6V-6609	[1]	SEAL-O-RING
32.	6V-7742 M	[1]	NUT-FULL (M20X2.5-THD)
33.	6V-8197 M	[3]	BOLT (M12X1.75X40-MM)
34.	8L-6557	[1]	CONNECTOR
35.	8M-2770	[1]	CLIP
36.	8T-3282	[1]	WASHER-HARD (22X35X3.5-MM THK)
37.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
38.	9N-0869	[2]	WASHER-HARD (8.8X25.5X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34110004

164-7564: AIR COMPRESSOR GP

AIR COMPRESSOR GP

164-7564 AIR COMPRESSOR GP
S/N CRJ1-UP
16.5 CFM AT 1250 RPM
PART OF 133-7032 AIR COMPRESSOR GP

i01070481 SEBP3411

For full view, you need register

Parts for your CPT372 PUMPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-4505	[4]	LOCKWASHER
2.	4P-3977	[1]	GASKET-CYLINDER HEAD
3.	0S-1617	[12]	BOLT (5/16-18X0.75-IN)
4.	7E-8924	[1]	PISTON & ROD AS
			(INCLUDES 2 PISTONS AND 2 ROD AS.)
5.	0L-1352	[6]	BOLT (3/8-16X3.25-IN)
6.	8T-6764	[2]	PLUG-PIPE (1/8-27-THD)
7.	2H-3934	[1]	SEAL-O-RING
8.	7C-6178	[2]	BEARING-REAR
9.	7E-8928	[1]	GASKET
10.	146-0835	[2]	STUD
11.	103-6216	[1]	KEY-WOODRUFF
12.	124-5572	[1]	VALVE AS-RELIEF (AIR COMPRESSOR)
13.	8T-6762	[1]	PLUG-PIPE (9.52 CF SQ HOLE)

			AVAILABLE REPAIR KIT(S):
	7E-8923	[1]	KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)
			(INCLUDES SEALS, GASKETS, WASHERS, & INSERTS)
	7E-8926	[1]	KIT-CYLINDER HEAD (AIR COMPRESSOR)
			(INCLUDES GASKETS, SEALS, VALVE,SEAT, & SPRING)
	164-7572	[1]	KIT-RING (AIR COMPRESSOR)
			(INCLUDES RINGS & PISTONS)
	150-5146	[1]	KIT-UNLOADER (AIR COMPRESSOR)

#SEBP34110005

196-9521: BEARING GP-MAIN

BEARING GP-MAIN

196-9521 BEARING GP-MAIN -CRANKSHAFT
S/N CRJ1-UP
FIELD INSTALLATION

i02039722 SEBP3411

For full view, you need register

Parts for your CPT372 PUMPER:

CATERPILLAR SIS

Part No	Qty	Parts name
211-0587	[4]	BEARING-MAIN
211-0588	[3]	BEARING-MAIN
246-3144	[2]	PLATE-THRUST

#SEBP34110006

136-4281: BELT TENSIONER GP

BELT TENSIONER GP

136-4281 BELT TENSIONER GP
S/N CRJ1-UP
INCLUDES ALTERNATOR BRACKET, POSITIONING STRAP, AND 370 IN/LB BELT TIGHTENER

i00502269 SEBP3411

For full view, you need register

Parts for your CPT372 PUMPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-7040	[1]	BRACKET
2.	133-7042	[1]	BRACKET
3.	133-3545	[1]	BELT TENSIONER
4.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
5.	9H-8260	[1]	BOLT (1/2-13X6.25-IN)
6.	1F-7958	[1]	NUT-FULL (1/2-13-THD)
7.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	6V-1820 M	[5]	BOLT (M10X1.5X30-MM)
9.	3E-4353	[5]	WASHER-HARD (11X25X3-MM THK)
10.	8T-0643 M	[5]	BOLT (M10X1.5X80-MM)
11.	0S-1595	[1]	BOLT (1/2-13X1.25-IN)
12.	131-6655	[1]	STRAP
13.	7D-1649	[1]	WASHER-HARD (13.5X32X5-MM THK)
14.	6V-8197 M	[1]	BOLT (M12X1.75X40-MM)
15.	6V-8149 M	[1]	NUT (M12X1.75-THD)
	M		METRIC PART

#SEBP34110007

171-3062: CAMSHAFT GP

CAMSHAFT GP

171-3062 CAMSHAFT GP
S/N CRJ1-UP

i01266165 SEBP3411

For full view, you need register

Parts for your CPT372 PUMPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5217 M	[5]	BOLT (M8X1.25X20-MM)
2.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
3.	178-3643	[1]	PIN-THRUST
4.	133-7068	[1]	GASKET-CAMSHAFT COVER
5.	171-3063	[1]	CAMSHAFT AS
5A.	1B-8705	[1]	KEY-WOODRUFF
5B.	128-0411	[1]	JOURNAL
5C.	133-7100	[1]	GEAR-CAMSHAFT DRIVE (96-TEETH)
6.	4K-9841	[1]	WASHER (0.406X0.75X0.064-IN THK)
7.	118-0459	[1]	COVER
	M		METRIC PART
	R		REMFG PART MAY BE AVAILABLE

#SEBP34110008

115-2985: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

115-2985 COVER GP-CYLINDER BLOCK
S/N CRJ1-UP
FOR USE WITH @@@@@117-2786@@@@@, SPIN ON PAPER BYPASS FILTER OR WHEN NO BYPASS FILTER IS USED

i00491113 SEBP3411

1152985 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your CPT372 PUMPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-6587	[1]	COVER
2.	6V-5217 M	[2]	BOLT (M8X1.25X20-MM)
3.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
4.	6V-1250	[1]	SEAL-O-RING
	M		METRIC PART

#SEBP34110009

113-8987: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

113-8987 COVER GP-FRONT HOUSING
S/N CRJ1-UP
POWER TAKE-OFF

i00480178 SEBP3411

1138987 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your CPT372 PUMPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
2.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
3.	129-2905	[1]	COVER
4.	107-5769	[1]	SEAL-O-RING
	M		METRIC PART

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Storage Procedures Exist for Caterpillar Products {1000, 7000}
2008/12/08

Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Severe Service Application - Check
CPT372 Truck Mounted Pumper

Engine - Clean
CPT372 Truck Mounted Pumper

Welding on Engines with Electronic Controls
CPT372 Truck Mounted Pumper

Starting the Engine
CPT372 Truck Mounted Pumper

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
3176C Engine

Engine Design
C-10 and C-12 Industrial Engines

Tool Operating Manual

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

Systems Operation

Engine Design
C-10 and C-12 Industrial Engines

General Information
C-10 and C-12 Industrial Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Troubleshooting

Engine Will Not Crank
C-10, C-12, C-15 and C-16 Industrial Engines

Low Engine Oil Pressure
C-10, C-12, C-15 and C-16 Industrial Engines

Engine Stalls at Low RPM
C-10, C-12, C-15 and C-16 Industrial Engines

Excessive Black Smoke
C-10, C-12, C-15 and C-16 Industrial Engines

Engine Cranks but Will Not Start
C-10, C-12, C-15 and C-16 Industrial Engines

Poor Acceleration or Response
C-10, C-12, C-15 and C-16 Industrial Engines

E190 Engine Overspeed Warning
C-10, C-12, C-15 and C-16 Industrial Engines

Engine Vibration
C-10, C-12, C-15 and C-16 Industrial Engines

Engine Misfires, Runs Rough or Is Unstable
C-10, C-12, C-15 and C-16 Industrial Engines

E004 Engine Overspeed Shutdown
C-10, C-12, C-15 and C-16 Industrial Engines

Excessive White Smoke
C-10, C-12, C-15 and C-16 Industrial Engines

Low Power/Poor or No Response to Throttle
C-10, C-12, C-15 and C-16 Industrial Engines

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog CPT372 :

117-0176 ADAPTER GP-ENGINE TO XMSN

133-7032 AIR COMPRESSOR GP

164-7564 AIR COMPRESSOR GP

196-9521 BEARING GP-MAIN

136-4281 BELT TENSIONER GP

171-3062 CAMSHAFT GP

115-2985 COVER GP-CYLINDER BLOCK

113-8987 COVER GP-FRONT HOUSING

201-7993 ENGINE AR S/N CRJ1-UP 250 BRAKE KW (335 BHP) AT 2100 RPM. LH SERVICE PART OF 150-5300 GENERAL AR-PUMPER CPT372

ENGINE ARRANGEMENT