BASIC ENGINE
PULLEY GPBASIC ENGINE
PULLEY GP
#SEBP34140280
143-4927: PULLEY GP-FAN DRIVE
143-4927 PULLEY GP-FAN DRIVE
1.29:1 RATIO. PROVIDES A 8 GROOVE PULLEY WITH A SHORT SHAFT
Type 3
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT
1.29:1 RATIO. PROVIDES A 8 GROOVE PULLEY WITH A SHORT SHAFT
Type 3
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-7238 | [1] | PLATE (THRUST) | |
| 2. | 190-3956 | [1] | PULLEY (8-GROOVE) | |
| 3. | 190-3968 | [1] | SHAFT-FAN | |
| 4. | 307-9798 C | [1] | BEARING AS | |
| 5. | 226-7914 C | [1] | BRACKET (FAN BEARING) | |
| 6. | 228-5827 C | [1] | RETAINER-BEARING | |
| 7. | 5C-7423 M | [4] | SCREW (M6X1X16-MM) | |
| 8. | 6V-3940 M | [3] | BOLT (M8X1.25X25-MM) | |
| 9. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 10. | 9M-1974 C | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | |
| 12. | 6V-5217 M | [3] | BOLT (M8X1.25X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP34140281
143-7018: PULLEY GP-FAN DRIVE
143-7018 PULLEY GP-FAN DRIVE
S/N CRP1-299
1:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, @@@@@120-6661@@@@@, @@@@@111-0315@@@@@, 50.8 MM PILOT
AN ATTACHMENT
S/N CRP1-299
1:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, @@@@@120-6661@@@@@, @@@@@111-0315@@@@@, 50.8 MM PILOT
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF)(PULLEY GROUP-FAN DRIVE) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 10. | 123-0856 | [1] | SHAFT-FAN | |
| 11. | 125-3722 | [1] | PULLEY-FAN | |
| 12. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| M | METRIC PART | |||
#SEBP34140282
143-7018: PULLEY GP-FAN DRIVE
143-7018 PULLEY GP-FAN DRIVE
S/N CRP300-UP
1:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, @@@@@120-6661@@@@@, @@@@@111-0315@@@@@, 50.8 MM PILOT
AN ATTACHMENT
S/N CRP300-UP
1:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, @@@@@120-6661@@@@@, @@@@@111-0315@@@@@, 50.8 MM PILOT
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-7238 | [1] | PLATE (THRUST) | |
| 2. | 123-0856 | [1] | SHAFT-FAN | |
| 3. | 125-3722 | [1] | PULLEY-FAN (8-GROOVE) | |
| 4. | 200-2282 C | [1] | BEARING AS | |
| 5. | 226-7914 C | [1] | BRACKET (FAN BEARING) | |
| 6. | 228-5827 C | [1] | RETAINER-BEARING | |
| 7. | 6V-3940 M | [3] | BOLT (M8X1.25X25-MM) | |
| 8. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 9. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 10. | 9M-1974 C | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 6V-5217 M | [4] | BOLT (M8X1.25X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP34140283
143-7019: PULLEY GP-FAN DRIVE
143-7019 PULLEY GP-FAN DRIVE
1:1 DRIVE RATIO
Type 1
FOR USE WITH @@@@@142-7107@@@@@, @@@@@111-0315@@@@@, FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT
1:1 DRIVE RATIO
Type 1
FOR USE WITH @@@@@142-7107@@@@@, @@@@@111-0315@@@@@, FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 10. | 128-2330 | [1] | SHAFT AS-FAN | |
| 10A. | 7E-8716 | [1] | CAP/PLUG-TAPERED | |
| 11. | 125-3722 | [1] | PULLEY-FAN | |
| 12. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| M | METRIC PART | |||
#SEBP34140284
143-7019: PULLEY GP-FAN DRIVE
143-7019 PULLEY GP-FAN DRIVE
1:1 DRIVE RATIO
Type 2
FOR USE WITH @@@@@142-7107@@@@@, @@@@@111-0315@@@@@, FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT
1:1 DRIVE RATIO
Type 2
FOR USE WITH @@@@@142-7107@@@@@, @@@@@111-0315@@@@@, FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-7238 | [1] | PLATE (THRUST) | |
| 2. | 125-3722 | [1] | PULLEY-FAN | |
| 3. | 128-2330 | [1] | SHAFT AS-FAN | |
| 4. | 200-2282 C | [1] | BEARING AS | |
| 5. | 226-7914 C | [1] | BRACKET (FAN BEARING) | |
| 6. | 228-5827 C | [1] | RETAINER-BEARING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 9. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 10. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP34140285
143-7021: PULLEY GP-FAN DRIVE
143-7021 PULLEY GP-FAN DRIVE
S/N CRP1-242
1.29:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT
S/N CRP1-242
1.29:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 120-6660 | [1] | PULLEY-FAN | |
| 10. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 128-2330 | [1] | SHAFT AS-FAN | |
| M | METRIC PART | |||
#SEBP34140286
143-7021: PULLEY GP-FAN DRIVE
143-7021 PULLEY GP-FAN DRIVE
S/N CRP243-UP
1.29:1 DRIVE RATIO, MULTI POSITION
Type 1
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT
S/N CRP243-UP
1.29:1 DRIVE RATIO, MULTI POSITION
Type 1
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 3. | 100-4026 | [1] | RETAINER-BEARING | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 6. | 190-3956 C | [1] | PULLEY (8-GROOVE) | |
| 7. | 190-3965 C | [1] | SHAFT AS | |
| 8. | 5M-6509 | [1] | SEAL-O-RING | |
| 9. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 10. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 12. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 13. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP34140287
143-7021: PULLEY GP-FAN DRIVE
143-7021 PULLEY GP-FAN DRIVE
S/N CRP243-UP
1.29:1 DRIVE RATIO, MULTI POSITION
Type 2
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT
S/N CRP243-UP
1.29:1 DRIVE RATIO, MULTI POSITION
Type 2
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-7238 | [1] | PLATE (THRUST) | |
| 2. | 190-3956 | [1] | PULLEY (8-GROOVE) | |
| 3. | 190-3965 | [1] | SHAFT AS | |
| 4. | 200-2282 C | [1] | BEARING AS | |
| 5. | 226-7914 C | [1] | BRACKET (FAN BEARING) | |
| 6. | 228-5827 C | [1] | RETAINER-BEARING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 9. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 10. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP34140288
175-3223: PULLEY GP-IDLER
175-3223 PULLEY GP-IDLER
PART OF 124-7786 BELT TENSIONER GP, 130-5871 PULLEY GP-ENGINE
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
AN ATTACHMENT
PART OF 124-7786 BELT TENSIONER GP, 130-5871 PULLEY GP-ENGINE
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS#SEBP34140289
250-2345: PULLEY GP-IDLER
250-2345 PULLEY GP-IDLER
PROVIDES AN IDLER GP FOR A POLY-V DRIVE SYSTEM WITHOUT A/C COMPRESSOR
FOR USE WITH @@@@@111-7242@@@@@
AN ATTACHMENT
PROVIDES AN IDLER GP FOR A POLY-V DRIVE SYSTEM WITHOUT A/C COMPRESSOR
FOR USE WITH @@@@@111-7242@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126E TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-3443 | [1] | BUSHING-TERMINAL | |
| 2. | 197-9642 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 3. | 219-7443 | [1] | BRACKET-IDLER | |
| 4. | 2Y-5829 M | [3] | NUT (M10X1.5-THD) | |
| 5. | 6V-4249 M | [2] | BOLT (M10X1.5X50-MM) | |
| 6. | 6V-5230 M | [1] | BOLT (M10X1.5X60-MM) | |
| 7. | 6V-5839 | [6] | WASHER (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
Information:
BASIC ENGINE
PULLEY GP
Operation and Maintenance Manual
Specifications
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
