AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

167-1171 MOUNTING GP-CONTROL VALVE S/N ABJ1-601 PART OF 167-7570, 167-7572 CONTROL AR-PILOT HYDRAULIC AN ATTACHMENT D7R II


HYDRAULIC SYSTEM
MOUNTING GP
CYLINDER GP
MOUNTING GP
PUMP GP
MOTOR GP
TANK GP
VALVE GP
VALVE GP-BANK

TRACK-TYPE TRACTOR D7R II TRACK-TYPE TRACTOR ABJ
 D7R Series ll Track-Type Tractor LGP Differential Steering ABJ00001-01499 (MACHINE) POWERED BY 3176C Engine SEBP3424 D7R II ABJ   (1999)

HYDRAULIC SYSTEM

MOUNTING GP
MOUNTING GP-CONTROL VALVE
167-1170 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CONTROL VALVE
167-1170 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CONTROL VALVE
167-1171 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CONTROL VALVE
167-1171 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CYLINDER
6Y-5694 MOUNTING GP-CYLINDER
MOUNTING GP-VALVE
164-3274 MOUNTING GP-VALVE
 

#SEBP34240540
 

167-1171: MOUNTING GP-CONTROL VALVE

167-1171 MOUNTING GP-CONTROL VALVE
S/N ABJ1-601
PART OF 167-7570, 167-7572 CONTROL AR-PILOT HYDRAULIC
AN ATTACHMENT
i01082785 SEBP3424
1671171 MOUNTING GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-5291 M [4] SCREW (M10X1.5X30-MM)  
2. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
3. [1] PLATE AS  
  5D-9629 [1] ROD  
  7T-1099 [3] LINK  
4. 225-4135 [1] GASKET  
5. 7X-7729 [4] WASHER (11X25X3-MM THK)  
6. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
7. 225-4134 [1] GASKET  
  M   METRIC PART
 

#SEBP34240541
 

167-1171: MOUNTING GP-CONTROL VALVE

167-1171 MOUNTING GP-CONTROL VALVE
S/N ABJ602-1499
PART OF 167-7570, 167-7572 CONTROL AR-PILOT HYDRAULIC
AN ATTACHMENT
i02225921 SEBP3424
1671171 MOUNTING GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-5291 M [4] SCREW (M10X1.5X30-MM)  
2. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
3. [1] PLATE AS  
  5D-9629 [1] ROD  
  7T-1099 [3] LINK  
4. 225-4135 [1] GASKET  
5. 7X-7729 [4] WASHER (11X25X3-MM THK)  
6. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
7. 225-4134 [1] GASKET  
  M   METRIC PART
 

#SEBP34240542
 

6Y-5694: MOUNTING GP-CYLINDER

6Y-5694 MOUNTING GP-CYLINDER
S/N 8RH1-99999; ABJ1-1499; J4L1-UP; 9KP1-UP
PART OF 154-3134, 212-7418, 9U-8549 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00392962 SEBP3424
6Y5694 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 4T-4875 [2] PIN  
3. 6Y-9280 [2] CLAMP (TAB)  
4. 6Y-9281 [2] CLAMP (SLOT)  
5. 9N-4233 [2] STRAP  
6. 229-9744 [2] YOKE  
7. 230-2636 [4] CAP AS  
    (EACH INCLUDES)
  104-1844 [1] BUSHING  
8. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
9. 5P-8248 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
10. 6V-0273 [2] SEAL-LIP TYPE  
11. 6V-8188 [2] NUT (1/2-13-THD)  
12. 7X-2568 M [8] BOLT (M20X2.5X180-MM)  
13. 8T-2561 [2] WASHER-HARD (10.5X28.5X5-MM THK)  
14. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4835 [2] BOLT (1/2-13X2-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
 

#SEBP34240543
 

164-3274: MOUNTING GP-VALVE

164-3274 MOUNTING GP-VALVE
S/N ABJ1-1499
PART OF 163-5431 HYDRAULIC AR
i01085162 SEBP3424
1643274 MOUNTING GP-VALVE Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
2. 030-9620 [3] BOLT (1/2-13X1.45-IN)  
3. 8T-4223 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 165-6577 N [1] PLATE AS  
5. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
6. 3F-4360 [3] SPACER (0.563X1X0.844-IN THK)  
  N   NEW PART
 

#SEBP34240544
 

162-0325: PUMP GP-PISTON

162-0325 PUMP GP-PISTON -IMPLEMENT
S/N ABJ1-1499
PART OF 163-5431 HYDRAULIC AR
i01474456 SEBP3424
1620325 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9599 [1] RING-RETAINING (INTERNAL)  
2. 9T-4912 [1] SEAL-LIP TYPE  
3. [1] HOUSING  
4. 9S-8008 [1] PLUG (1-1/16-12-THD)  
5. 3D-2824 [1] SEAL-O-RING  
6. 121-9910 [1] RING  
7. 8Q-6071 [1] SPACER (45.5X55X3-MM THK)  
8. 4K-5843 [1] CUP-BEARING (TAPERED ROLLER)  
9. 192-8866 [1] SHAFT  
10. 8U-9480 [2] PIN  
11. 121-9913 [2] BEARING  
12. 190-7684 [1] SWASHPLATE  
13. 121-9915 [3] SLEEVE  
14. 191-2156 [9] PISTON AS  
15. 121-9917 [1] WASHER (66.5X133X5.5-MM THK)  
16. 121-9918 B [1] PLATE (0.05-MM THK)  
17. 121-9919 B [1] PLATE (0.075-MM THK)  
18. 121-9920 B [1] PLATE (0.1-MM THK)  
19. 121-9921 [1] PLATE  
20. 121-9922 B [1] PLATE (0.05-MM THK)  
21. 121-9924 B [1] PLATE (0.075-MM THK)  
22. 121-9923 B [1] PLATE (0.1-MM THK)  
23. 121-9925 [1] PLATE  
24. 8U-3297 M [4] BOLT (M10X1.5X25-MM)  
25. 190-8368 [1] BARREL AS  
26. 121-9927 [1] WASHER (44.4X57.6X5-MM THK)  
27. 190-8830 [1] SPRING  
28. 191-2127 [1] WASHER (44X57.9X4-MM THK)  
29. 193-2219 [1] SPACER (46X50.5X23.2-MM THK)  
30. 193-2239 [1] SEAL  
31. 195-6882 [1] RING  
32. 195-6890 [1] SPACER (51.5X58X23-MM THK)  
33. 195-6899 [1] RING  
34. 195-6901 [1] BEARING  
35. 8U-5009 B [1] SHIM (0.1-MM THK)  
36. 8U-5010 B [1] SHIM (0.3-MM THK)  
37. 195-6902 B [1] SHIM (1-MM THK)  
38. 195-6903 [1] PLATE (HEAD)  
39. 101-2862 [2] DOWEL  
40. 285-9263 [1] HOUSING AS-PUMP  
41. 8U-3875 [1] PLUG  
42. 285-5644 [1] RING-RETAINING  
44. 131-4675 [1] RING  
45. 8C-3131 [2] SEAL-O-RING  
46. 121-9941 [2] RING  
47. 121-9942 [2] PIPE  
48. 195-6913 [1] PISTON-ACTUATOR  
49. 285-9162 [1] PISTON-ACTUATOR  
50. 195-6928 [1] RETAINER  
51. 288-1200 [1] RETAINER  
52. 195-6930 [1] SPRING  
53. 121-9946 [2] PIN  
54. 9T-4901 M [2] NUT (M12X1-THD)  
55. 195-6931 [9] BOLT (M14X2X70-MM)  
56. 117-8765 [1] SEAL-O-RING  
57. 195-6932 [1] COVER  
58. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
59. 6V-5192 M [3] BOLT-SOCKET HEAD (M8X1.25X30-MM)  
60. 227-3021 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
61. 284-3782 [1] PISTON (SLEEVE)  
62. 7T-6654 [1] CONE-BEARING (TAPERED ROLLER)  
   
    AVAILABLE REPAIR KIT(S):
  B [1] KIT-SHIM (INCLUDES 21-SHIMS)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34240545
 

171-6001: ROTATING GP-MOTOR

171-6001 ROTATING GP-MOTOR -STEERING
S/N ABJ1-1499
PART OF 159-7156 MOTOR GP-PISTON
i01121138 SEBP3424
1716001 ROTATING GP-MOTOR Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-3068 [1] SHAFT-MOTOR  
2. 123-5748 [1] SEAL-SHAFT  
3. 472-3665 [1] COVER AS-FRONT  
  123-5748 [1] SEAL-SHAFT  
4. 6V-3326 [1] RING-RETAINING  
5. 2J-8163 [1] SEAL-O-RING  
6. 9T-1576 B [2] SHIM (0.1-MM THK)  
7. 9T-1579 B [2] SHIM (0.3-MM THK)  
8. 216-0029 M [7] SCREW (M6X20-MM)  
9. 9T-1687 [1] BARREL-CYLINDER  
10. 171-3054 [1] PIN-CENTER  
11. 171-3061 [1] SPRING  
12. 171-3055 B [1] SHIM (4-MM THK)  
13. 171-3057 B [1] SHIM (3.9-MM THK)  
14. 171-3058 B [1] SHIM (3.8-MM THK)  
15. 171-3059 B [1] SHIM (3.7-MM THK)  
16. 171-3060 B [1] SHIM (3.6-MM THK)  
17. 9T-1689 [1] PLATE-PORT  
18. 165-6969 [7] PISTON AS  
19. 9T-1642 [1] PLATE-RETAINING  
20. 171-5989 [1] KIT-BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP34240546
 

140-8484: TANK GP-HYDRAULIC

140-8484 TANK GP-HYDRAULIC
S/N ABJ1-1499
PART OF 163-5431 HYDRAULIC AR
i00500660 SEBP3424
1408484 TANK GP-HYDRAULIC Parts scheme 1408484 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2827 [1] GUIDE-VALVE  
2. 8J-8782 [1] BODY-DRAIN VALVE  
3. 8J-8783 [1] VALVE-DRAIN (TANK DRAIN)  
4. 9J-7031 [1] PLUG-DRAIN (HYDRAULIC TANK)  
5. 170-2488 [1] TANK AS  
  9J-7203 [1] FILLER  
6. 0L-1351 [66] BOLT (3/8-16X0.875-IN)  
7. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
8. 0S-1594 [2] BOLT (3/8-16X1-IN)  
9. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
10. 187-0566 [1] COVER AS  
  3J-1907 [1] SEAL-O-RING  
  7V-0654 [4] BLOCK  
  8C-5054 [8] STUD-WELD  
11. 1L-5072 [1] DOWEL  
12. 1P-4579 [2] FLANGE-HALF  
13. 2D-4202 [1] PLATE  
14. 2J-7761 [1] RING-RETAINING  
15. 2K-4973 [82] LOCKNUT (3/8-16-THD)  
16. 3G-2692 [1] RETAINER  
17. 3J-7354 [2] SEAL-O-RING  
18. 4J-0524 [3] SEAL-O-RING  
19. 4J-8251 [1] GROMMET  
20. 4J-8252 [1] GAUGE-SIGHT  
21. 5D-0353 [2] BOLT-LOCKING (3/8-16X1-IN)  
22. 5D-1911 [1] COVER-HYDRAULIC CAP  
23. 5D-7927 [1] STRAINER AS-OIL  
24. 5H-4893 [4] BOLT (1/2-13X1-IN)  
25. 5H-6005 [2] SEAL-O-RING  
26. 5M-2057 [1] SEAL-O-RING  
27. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 6H-9361 [1] RING-RETAINING  
30. 6K-6307 [1] SEAL-O-RING  
31. 6Y-3530 [1] PLATE  
32. 7B-3039 [1] SPRING  
33. 7H-1447 [1] CAP-FILLER (HYDRAULIC)  
34. 8T-2275 [1] BALL  
35. 8T-3298 [1] SEAL-RECTANGULAR  
36. 8V-7764 [1] ADAPTER-O-RING  
37. 9H-6454 [1] GASKET  
38. 9M-7394 [1] LEVER  
39. 9S-8002 [2] PLUG (7/16-20-THD)  
40. 187-9194 [1] PLATE (SIGHT GLASS)  
41. 9T-1786 Y [1] FILTER GP-OIL (IMPLEMENT RETURN)  
42. 9T-1969 [1] BLOCK  
43. 9T-2435 [1] ADAPTER  
44. 9T-8999 [1] FILTER GP-OIL (CASE DRAIN)  
  4T-6788 [1] FILTER-OIL (ADVANCED EFFICIENCY)  
45. 5P-9119 BD GASKET-TAPE (ADHESIVE BACKED)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP34240547
 

234-5126: VALVE & MTG GP-BULLDOZER

234-5126 VALVE & MTG GP-BULLDOZER -GRADE CONTROL
S/N ABJ1-1499
PART OF 250-1849 LINES GP-PILOT
AN ATTACHMENT
i02212420 SEBP3424
2345126 VALVE & MTG GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 201-0950 Y [1] VALVE GP-SOLENOID (HYDRAULIC LOCKOUT)  
2. 234-5124 [1] MANIFOLD AS  
  148-9359 [9] PLUG  
3. 341-9214 Y [4] VALVE GP-SOLENOID (BLADE CONTROL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP34240548
 

250-1850: VALVE & MTG GP-BULLDOZER

250-1850 VALVE & MTG GP-BULLDOZER -GRADE CONTROL
S/N ABJ1-1499
PART OF 250-6089 GRADE CONTROL AR
AN ATTACHMENT
i02309895 SEBP3424
2501850 VALVE & MTG GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 239-0681 Y [1] VALVE GP-COUNTERBALANCE  
2. 250-2957 [1] TUBE AS  
3. 250-2958 [1] TUBE AS  
4. 1P-3704 [2] SEAL-RECTANGULAR  
5. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
6. 8T-6466 M [8] BOLT (M10X1.5X60-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34240549
 

162-8310: VALVE GP-BANK 3

162-8310 VALVE GP-BANK 3 -BULLDOZER, STEERING
S/N ABJ1-1499
PART OF 164-6172 CONTROL AR-HYDRAULIC IMPLEMENT
i01090829 SEBP3424
1628310 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-3624 [2] PLUG AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
2. 112-9497 Y [1] VALVE GP-CONTROL (STEERING)  
3. 162-8314 Y [1] VALVE GP-CONTROL (BULLDOZER LIFT)  
4. 162-8315 Y [1] VALVE GP-CONTROL (BULLDOZER TILT)  
5. 164-7677 [3] ROD  
6. 164-8913 Y [1] MANIFOLD GP-VALVE (INLET)  
8. 169-9119 [1] COVER  
10. 1P-3702 [1] SEAL-RECTANGULAR  
11. 1P-4577 [8] FLANGE-HALF  
12. 1P-4578 [2] FLANGE-HALF  
13. 1P-5765 [4] FLANGE-HALF  
14. 207-7899 [1] PLUG AS  
  4K-1388 [1] SEAL-O-RING  
  9S-4188 [1] PLUG  
15. 4J-0522 [12] SEAL-O-RING  
16. 4J-8997 [3] SEAL-O-RING  
17. 5S-7382 [16] BOLT (3/8-16X1.375-IN)  
18. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
19. 6V-5555 [12] SEAL-O-RING  
20. 6V-8188 [3] NUT (1/2-13-THD)  
21. 7X-3392 [3] WASHER-HARD (13.5X22.5X3-MM THK)  
22. 8T-4896 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-5360 [4] WASHER (12X22.5X2.5-MM THK)  
24. 8T-8916 [4] BOLT (7/16-14X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D7R II :

MOUNTING GP-CONTROL VALVE
167-1170 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CONTROL VALVE
167-1170 MOUNTING GP-CONTROL VALVE
MOTOR GP-PISTON
159-7156 MOTOR GP-PISTON
MANIFOLD GP-VALVE
164-8913 MANIFOLD GP-VALVE
MANIFOLD GP-VALVE
164-8913 MANIFOLD GP-VALVE
MANIFOLD GP-HYDRAULIC
161-8893 MANIFOLD GP-HYDRAULIC
LINES GP-WINCH
164-3263 LINES GP-WINCH
LINES GP-TILT CYLINDER
9U-8548 LINES GP-TILT CYLINDER
MOUNTING GP-CONTROL VALVE
167-1171 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CYLINDER
6Y-5694 MOUNTING GP-CYLINDER
MOUNTING GP-VALVE
164-3274 MOUNTING GP-VALVE
PUMP GP-PISTON
162-0325 PUMP GP-PISTON
ROTATING GP-MOTOR
171-6001 ROTATING GP-MOTOR
TANK GP-HYDRAULIC
140-8484 TANK GP-HYDRAULIC
VALVE & MTG GP-BULLDOZER
234-5126 VALVE & MTG GP-BULLDOZER
VALVE & MTG GP-BULLDOZER
250-1850 VALVE & MTG GP-BULLDOZER

Truck sale:

Caterpillar D7RII, Construction
238,939 
Caterpillar D7RII, Construction
- Dozers
WESTRAC PTY. LTD. (NSW)
Australia
 
260,337 
Caterpillar D7RII, Construction
- Dozers
WESTRAC PTY. LTD. (NSW)
Australia
Caterpillar D7RIILGP, Construction
220,000 
Caterpillar D7RIILGP, Construction
- Dozers
ZIEGLER CAT
Caterpillar D7RIILGP, Construction
179,000 
Caterpillar D7RIILGP, Construction
- Dozers
FOLEY, INC.
Caterpillar D7RIILGP, Construction
244,500 
Caterpillar D7RIILGP, Construction
- Dozers
YANCEY BROS. CO.
GA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.