AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

193-8375 WIRING GP-CAB S/N CAB1-UP; CMB1-UP; 4NZ3400-UP; 5FZ6700-UP PART OF 191-2902, 191-9602, 200-0802, 200-1002 CHASSIS AR 216


ELECTRICAL AND STARTING SYSTEM
WIRING GP
SWITCH GP
WIRING GP
LIGHTING GP
WIRING GP

SKID STEER LOADER 216 SKID STEER LOADER 4NZ
 216 226 232 242 Skid Steer Loader 4NZ03400-UP (MACHINE) POWERED BY 3024C, 3034 Engine SEBP3428 216 4NZ   (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
SWITCH GP-PRESS & TEMP
247-0323 SWITCH GP-PRESS & TEMP
220-5526 WIRING GP-AIR CONDITIONER
WIRING GP-CAB
193-8375 WIRING GP-CAB
WIRING GP-CHASSIS
190-8001 WIRING GP-CHASSIS
WIRING GP-ENGINE
197-6900 WIRING GP-ENGINE
WIRING GP-ENGINE
197-8466 WIRING GP-ENGINE
 

#SEBP34280190
 

193-8375: WIRING GP-CAB

193-8375 WIRING GP-CAB
S/N CAB1-UP; CMB1-UP; 4NZ3400-UP; 5FZ6700-UP
PART OF 191-2902, 191-9602, 200-0802, 200-1002 CHASSIS AR
i01434263 SEBP3428
1938375 WIRING GP-CAB Parts scheme 1938375 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
3. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
4. 7G-1060 [1] STRAP AS-GROUND  
5. 8T-8737 [13] PLUG-SEAL  
6. 8T-9655 [6] MOUNT-ISOLATION  
7. 9R-7941 [1] SOCKET AS  
8. 113-8490 [1] FUSE (10-AMPERE)(GAGE PANEL)  
8A. 113-8490 [1] FUSE (10-AMPERE)(INTERLOCK)  
8B. 113-8490 [1] FUSE (10-AMPERE)(COLD START)  
8C. 113-8490 [1] FUSE (10-AMPERE)(AUXILIARY HYDRAULIC)  
8D. 113-8490 [1] FUSE (10-AMPERE)(KEY START SWITCH)  
8E. 113-8490 [1] FUSE (10-AMPERE)(SPARE)  
8F. 113-8490 [1] FUSE (10-AMPERE)(RH TAIL LAMP)  
8G. 113-8490 [1] FUSE (10-AMPERE)(LH TAIL LAMP)  
8H. 113-8490 [1] FUSE (10-AMPERE)(FUEL SHUTOFF)  
9. 113-8491 [1] FUSE (15-AMPERE)(REAR WORKING LAMP)  
9A. 113-8491 [1] FUSE (15-AMPERE)(WIPER LEVER)  
10. 128-4249 [1] LOCKWASHER  
11. 143-1974 [4] RECEPTACLE  
12. 146-4323 [1] RELAY AS (12-VOLT)(PARKING BRAKE)  
13. 154-4233 Y [1] CONTROL GP-INTERLOCK  
14. 188-0131 [1] BRACKET AS  
15. 190-8002 [1] HARNESS AS-CAB (INTERLOCK)  
  116-4159 [1] BASE  
  125-2122 [1] CONNECTOR  
  112-9609 [1] BLOCK-MICRORELAY  
  124-9636 [1] BLOCK-MINIFUSE  
  112-9610 [1] LOCK-MICRORELAY  
  124-9637 [1] LOCK-MINIFUSE  
  111-6816 [1] LOCK  
  8T-8737 [24] PLUG-SEAL  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7T-0094 [6] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [115] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8L-8413 [11] STRAP-CABLE (WHITE)  
  112-9611 [8] TERMINAL-BLADE (18-GA TO 20-GA)  
  112-9612 [12] TERMINAL-BLADE  
  116-4160 [3] TERMINAL-BLADE (12-GA TO 14-GA)  
  116-4161 [14] TERMINAL-BLADE (16-GA TO 18-GA)  
  3E-9179 [4] TERMINAL-RECEPTACLE (14-GA TO 18-GA)  
  111-6792 [3] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(55-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
16. 193-8374 Y [1] COVER GP-FUSE PANEL  
17. 211-0052 [1] NUT (1-11/16-18-THD)  
18. 111-4627 M [4] SCREW-MACHINE (M6X1X30-MM)  
19. 195-0936 M [8] INSERT-THREADED (M6X1-THD)  
20. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
21. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
22. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
23. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
24. 4P-7581 [1] CLIP (LADDER)  
25. 4P-8134 [2] CLIP (LADDER)  
26. 5C-7261 M [3] NUT (M8X1.25-THD)  
27. 5C-8312 M [2] NUT (M4X0.7-THD)  
28. 5C-9553 M [6] BOLT (M6X1X16-MM)  
29. 7G-7053 [1] GROMMET  
30. 7X-0579 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
31. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [1] NUT (M10X1.5-THD)  
33. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 9X-1046 M [2] SCREW (M4X0.7X18-MM)  
35. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
36. 9X-6165 [4] WASHER (6.5X22X2.5-MM THK)  
37. 9X-2092 E TRIM-EDGE (21-CM)  
38. 146-4323 [1] RELAY AS (12-VOLT)(ARMREST INDICATOR)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP34280191
 

190-8001: WIRING GP-CHASSIS

190-8001 WIRING GP-CHASSIS
S/N CAB1-UP; CMB1-UP; 4NZ3400-UP; 5FZ6700-UP
PART OF 191-2902, 191-9602, 200-0802, 200-1002 CHASSIS AR
i01434291 SEBP3428
1908001 WIRING GP-CHASSIS Parts scheme 1908001 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
2. 7D-5473 [2] BOLT-SOCKET HEAD (8-32X0.75-IN)  
3. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
4. 8M-4963 [1] STRAP AS-GROUND  
5. 8T-9655 [6] MOUNT-ISOLATION  
6. 115-1615 [6] RELAY AS (12-VOLT)(POWER DISTRIBUTION)  
7. 128-4249 [2] LOCKWASHER  
8. 142-8640 [1] HARNESS AS-REAR LIGHTING (DOOR)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
9. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
10. 167-7801 [1] RESISTOR AS (390-OHM, 2-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
  1H-3244 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 178-2254 Y [1] ELECTRONICS GP-IMPLEMENT (AUXILIARY HYDRAULIC)(AUXILIARY)  
13. 190-8006 [1] HARNESS AS-PLATFORM (POWER)  
  9X-3401 [52] PIN-CONNECTOR (16-GA TO 18-GA)  
  7T-0093 [6] PIN-CONNECTOR (12-GA TO 14-GA)  
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  9X-1054 [6] PLUG AS-CONNECTOR (4-PIN)  
  150-6765 [1] PLUG AS-CONNECTOR (26-PIN)  
  159-9322 [1] SEAL-O-RING  
  8T-8737 [25] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  9X-3402 [101] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  7T-0094 [2] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8L-8413 [39] STRAP-CABLE (WHITE)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  128-4190 [1] TERMINAL AS  
  6H-3586 [1] TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW)  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  2L-8069 [3] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8079 [3] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  9X-1055 [10] TERMINAL-RECEPTACLE (12-GA)  
  9X-1056 [2] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  100-5041 [12] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(80-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)  
14. 190-8008 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK, LH)  
  9X-3401 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [1] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [12] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
15. 190-8009 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK, RH)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [1] PLUG-SEAL  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
16. 193-8378 [1] BRACKET AS  
17. 197-6897 [1] WIRE AS  
18. 202-0602 [1] PLATE  
19. 211-0052 [2] NUT (1-11/16-18-THD)  
20. 102-8802 B [5] KIT-RECEPTACLE (2-PIN)  
21. 102-8804 B [2] KIT-RECEPTACLE (4-PIN)  
22. 102-8806 B [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
23. 3S-2093 [34] STRAP-CABLE  
24. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
25. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
26. 4P-8134 [2] CLIP (LADDER)  
27. 5C-9553 M [7] BOLT (M6X1X16-MM)  
28. 5L-4507 [2] SCREW-MACHINE (10-32X0.875-IN)  
29. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
30. 7X-0818 M [3] BOLT (M8X1.25X45-MM)  
31. 8C-8558 [4] SCREW-LOCK (4-40X0.25-IN)  
32. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [3] NUT (M10X1.5-THD)  
34. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
35. 8T-4205 [7] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  8T-8737 F [36] PLUG-SEAL  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34280192
 

197-6900: WIRING GP-ENGINE

197-6900 WIRING GP-ENGINE
S/N CMB1-UP; 5FZ6700-UP
PART OF 191-2902, 200-1002 CHASSIS AR
i01440195 SEBP3428
1976900 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-8134 [2] CLIP (LADDER)  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 142-7513 [1] CABLE AS-BATTERY (POSITIVE)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  159-8049 E CABLE (00-GA, RED)(30-CM)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
4. 142-7517 [1] CABLE AS-GROUND  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  159-8050 E CABLE (00-GA, BLACK)(48-CM)  
  7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  8S-3020 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
5. 197-6901 [1] HARNESS AS-ENGINE  
  8T-8799 [3] BOOT (RED)  
  107-3134 [1] HOUSING-CONNECTOR (ALTERNATOR)  
  7T-0093 [2] PIN-CONNECTOR (12-GA TO 14-GA)  
  9X-3401 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  305-5362 [2] TERMINAL AS (18-GA)  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  9G-4336 [1] TERMINAL-RING (4-GA, 3/8-IN SCREW)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  128-4190 [2] TERMINAL AS  
  6H-3586 [1] TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW)  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)(ALTERNATOR)  
6. 115-3073 [1] CLIP AS-CONNECTING  
7. 3S-2093 B [5] STRAP-CABLE  
8. 4P-7581 [1] CLIP (LADDER)  
9. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [1] NUT (M10X1.5-THD)  
12. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP34280193
 

197-8466: WIRING GP-ENGINE

197-8466 WIRING GP-ENGINE
S/N CAB1-UP; 4NZ3400-UP
PART OF 191-9602, 200-0802 CHASSIS AR
i01565297 SEBP3428
1978466 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 8T-8737 [5] PLUG-SEAL  
4. 142-7517 [1] CABLE AS-GROUND  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  5P-0747 CABLE (00-GA, BLACK)(48CM)  
  7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  8S-3020 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
5. 202-2171 [1] HARNESS AS  
6. 115-3073 [1] CLIP AS-CONNECTING  
  8C-3334 [1] RIVET-TUBULAR  
7. 172-9200 [1] SUPPRESSOR-ARC  
 

#SEBP34280194
 

212-6520: WIRING GP-QUICK COUPLER

212-6520 WIRING GP-QUICK COUPLER
S/N CAB1-UP; CMB1-UP; 4NZ3400-UP; 5FZ6700-UP
PART OF 224-9412, 224-9414 CONVERSION AR-QUICK COUPLER, 212-4155, 212-4156 COUPLER AR-QUICK
AN ATTACHMENT
i01671003 SEBP3428
2126520 WIRING GP-QUICK COUPLER Parts scheme 2126520 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-6521 [1] SWITCH AS-ROCKER (QUICK COUPLER)  
  111-7899 [1] GASKET  
2. 212-6522 [1] HARNESS AS-WIRING (HYDRAULIC COUPLER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [3] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [4] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP34280195
 

192-2694: WIRING GP-REAR LIGHTING

192-2694 WIRING GP-REAR LIGHTING
S/N CAB1-UP; CMB1-UP; 4NZ3400-UP; 5FZ6700-UP
PART OF 206-3778, 222-5698 CONVERSION AR-ROADING
AN ATTACHMENT
i01516270 SEBP3428
1922694 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
2. 115-1615 [1] RELAY AS (12-VOLT)(STOP LIGHT)  
3. 166-2033 [2] TEE AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  7X-2444 [1] TEE-SWIVEL  
4. 180-3008 [1] HARNESS AS-REAR  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS , WEDGE & INTERFACE SEAL)
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (20-CM)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  100-5041 [4] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
5. 184-1564 Y [2] SWITCH GP-PRESSURE (STOP LIGHT)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP34280196
 

187-1258: WIRING GP-WORK TOOL

187-1258 WIRING GP-WORK TOOL
S/N 4NZ3400-UP; 5FZ6700-UP
AN ATTACHMENT
i01409850 SEBP3428
1871258 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 8T-8737 [3] PLUG-SEAL  
3. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 105-3542 [1] DIODE GP (RECEPTACLE)  
5. 110-8760 [1] STRAP  
6. 113-8491 [2] FUSE (15-AMPERE)(WORK TOOL)  
7. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
8. 142-9184 [1] BRACKET  
9. 142-9333 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  7T-0093 [5] PIN-CONNECTOR (12-GA TO 14-GA)  
  9G-3695 [3] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  1S-9593 [1] STRAP-CABLE  
10. 146-4323 [2] RELAY AS (12-VOLT)(WORK TOOL)  
11. 159-9495 [1] NUT (1-1/2-18-THD)  
12. 159-9496 [1] LOCKWASHER  
13. 193-8339 [1] PLATE  
14. 204-1396 Y [1] CONTROL GP-HANDLE (LH)  
15. 5C-7261 M [2] NUT (M8X1.25-THD)  
16. 8T-0255 [1] PIN-SPRING  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
19. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34280197
 

193-8353: WIRING GP-WORK TOOL

193-8353 WIRING GP-WORK TOOL
S/N 4NZ3400-UP; 5FZ6700-UP
PART OF 191-2909 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT
i01437007 SEBP3428
1938353 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
2. 3S-2093 [5] STRAP-CABLE  
3. 8T-8737 [3] PLUG-SEAL  
4. 105-3542 [1] DIODE GP  
5. 113-8491 [2] FUSE (15-AMPERE)(WORK TOOL)  
6. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
7. 142-9333 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  7T-0093 [5] PIN-CONNECTOR (12-GA TO 14-GA)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  9G-3695 [3] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  1S-9593 [1] STRAP-CABLE  
8. 146-4323 [2] RELAY AS (12-VOLT)(WORK TOOL)  
9. 159-9495 [1] NUT (1-1/2-18-THD)  
10. 159-9496 [1] LOCKWASHER  
11. 193-8339 [1] PLATE  
12. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP34280198
 

193-8379: WIRING GP-WORK TOOL

193-8379 WIRING GP-WORK TOOL
S/N CAB1-UP; CMB1-UP
PART OF 216-6133 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT
i01474608 SEBP3428
1938379 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
2. 3S-2093 [4] STRAP-CABLE  
3. 8T-8737 [3] PLUG-SEAL  
4. 105-3542 [1] DIODE GP  
5. 113-8491 [2] FUSE (15-AMPERE)(WORK TOOL)  
6. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
7. 140-9378 [2] RELAY AS (12-VOLT)(WORK TOOL)  
8. 159-9495 [1] NUT (1-1/2-18-THD)  
9. 159-9496 [1] LOCKWASHER  
10. 193-8339 [1] PLATE  
11. 197-7639 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  7T-0093 [7] PIN-CONNECTOR (12-GA TO 14-GA)  
  8T-8737 [1] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
12. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP34280199
 

197-8467: WIRING GP-WORK TOOL

197-8467 WIRING GP-WORK TOOL
S/N CAB1-UP; CMB1-UP
AN ATTACHMENT AND FIELD INSTALLATION
i01559896 SEBP3428
1978467 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 8T-8737 [3] PLUG-SEAL  
3. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 105-3542 [1] DIODE GP  
5. 113-8491 [2] FUSE (15-AMPERE)(WORK TOOL)  
6. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
7. 146-4323 [2] RELAY AS (12-VOLT)(WORK TOOL)  
8. 159-9495 [1] NUT (1-1/2-18-THD)  
9. 159-9496 [1] LOCKWASHER  
10. 193-8339 [1] PLATE  
11. 197-7639 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  7T-0093 [7] PIN-CONNECTOR (12-GA TO 14-GA)  
  8T-8737 [1] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
12. 204-1396 Y [1] CONTROL GP-HANDLE (LH)  
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
16. 8T-0255 [1] PIN-SPRING  
17. 110-8760 [1] STRAP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3034 Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 216 :

220-5526 WIRING GP-AIR CONDITIONER
WARNING GP-BACKUP
142-8656 WARNING GP-BACKUP
SWITCH GP-TEMPERATURE
164-8388 SWITCH GP-TEMPERATURE
SWITCH GP-TEMPERATURE
164-8388 SWITCH GP-TEMPERATURE
SWITCH GP-PRESSURE
184-1564 SWITCH GP-PRESSURE
SWITCH GP-PRESSURE
171-4613 SWITCH GP-PRESSURE
SWITCH GP-PRESS & TEMP
247-0323 SWITCH GP-PRESS & TEMP
STARTING MOTOR GP-ELECTRIC
339-2900 STARTING MOTOR GP-ELECTRIC
WIRING GP-CHASSIS
190-8001 WIRING GP-CHASSIS
WIRING GP-ENGINE
197-6900 WIRING GP-ENGINE
WIRING GP-ENGINE
197-8466 WIRING GP-ENGINE
WIRING GP-QUICK COUPLER
212-6520 WIRING GP-QUICK COUPLER
WIRING GP-REAR LIGHTING
192-2694 WIRING GP-REAR LIGHTING
WIRING GP-WORK TOOL
187-1258 WIRING GP-WORK TOOL
WIRING GP-WORK TOOL
193-8353 WIRING GP-WORK TOOL
WIRING GP-WORK TOOL
193-8379 WIRING GP-WORK TOOL

Truck sale:

Caterpillar 216, Skid Steer Loaders, Construction
19,500 
Caterpillar 216, Skid Steer Loaders, Construction
- Skid Steer Loaders
N C MACHINERY CO.
Caterpillar LIFT TRUCKS EJC 216, Misc Forklifts, Material handling equipment
5,000 
Caterpillar LIFT TRUCKS EJC 216, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
 
14.179 
Caterpillar 216, Kompaktlader, Bau-Und Bergbauausrüstung


Caterpillar 216.TO.299, schaufel, Bau-Und Bergbauausrüstung
 
Caterpillar 216.TO.299, schaufel, Bau-Und Bergbauausrüstung
- bucket
HASTINGS DEERING (AUSTRALIA)
Australia
 
 
Caterpillar 216, Construction
- Skid Steer Loaders
WESTERN STATES EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.