AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

138-2028 PLUG GP-CYLINDER BLOCK USE WHEN DIPSTICK IS NOT REQUIRED C-12 ENGINE - MACHINE


BASIC ENGINE
CYLINDER BLOCK GP
HOUSING GP-FRONT
PULLEY GP
VALVE MECHANISM GP
CRANKSHAFT GP
MOUNTING GP-ENGINE
VALVE MECHANISM GP
COOLING SYSTEM
COOLER GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL

ENGINE - MACHINE C-12 ENGINE - MACHINE BDL
 C-12 Industrial Engine For Claas Combine Applications BDL00001-UP SEBP3442 C-12 BDL   (2018)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
115-2985 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
200-2054 CYLINDER BLOCK AS
CYLINDER BLOCK AS
204-3449 CYLINDER BLOCK AS
CYLINDER BLOCK GP
115-2983 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
115-2984 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
138-2028 PLUG GP-CYLINDER BLOCK
 

#SEBP34420040
 

138-2028: PLUG GP-CYLINDER BLOCK

138-2028 PLUG GP-CYLINDER BLOCK
USE WHEN DIPSTICK IS NOT REQUIRED
i00635439 SEBP3442
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-4182 [1] PLUG (7/16-20 THD)  
  8T-6762 [1] PLUG-PIPE (1/4-14NPTF THD)  
  9S-4191 [1] PLUG (9/16-18 THD)  
  3J-1907 [1] SEAL-O-RING (11.89MM ID)  
  6V-5048 [1] SEAL-O-RING (8.92MM ID)  
 

#SEBP34420041
 

116-5452: PLUG GP-FRONT HOUSING

116-5452 PLUG GP-FRONT HOUSING
SENSOR
CANNOT BE USED WITH TWO SPEED TIMING SENSORS
i00486962 SEBP3442
1165452 PLUG GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8005 [1] PLUG  
2. 8L-2786 [1] SEAL-O-RING  
 

#SEBP34420042
 

117-0177: PULLEY GP-ALTERNATOR

117-0177 PULLEY GP-ALTERNATOR
3.34:1 DRIVE RATIO. 68.5 MM (2.9 IN) DIAMETER, 8 GROOVE
FOR USE WITH @@@@@116-5444@@@@@, 22.19 MM (0.87 IN) DIAMETER ALTERNATOR SHAFT WITH OR WITHOUT KEY, 228.5 MM (9.0 IN) DIAMETER CRANKSHAFT PULLEY
i00490664 SEBP3442
1170177 PULLEY GP-ALTERNATOR Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-0791 [1] PULLEY (8 GROOVE)(ALTERNATOR)  
 

#SEBP34420043
 

116-5444: PULLEY GP-CRANKSHAFT

116-5444 PULLEY GP-CRANKSHAFT
225.5MM(9 INCH) DIAMETER-8 GROOVE
FOR USE WITH @@@@@117-2771@@@@@
i01438030 SEBP3442
1165444 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-7316 [1] PULLEY (8 GROOVE)  
 

#SEBP34420044
 

115-9397: ROCKER ARM GP

115-9397 ROCKER ARM GP
PART OF 117-2749 VALVE MECHANISM GP
i00474540 SEBP3442
1159397 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-9398 [2] ARM-VALVE ROCKER (EXHAUST)  
2. 115-9400 [2] ARM AS (UNIT INJECTION)  
    (EACH INCLUDES)
  2D-6642 [2] BALL  
  115-9402 [1] BEARING  
3. 115-9399 [2] ARM-VALVE ROCKER (INLET)  
4. 7C-1798 [2] SCREW-ARM ADJUSTMENT  
5. 245-6095 [2] NUT-HEX THIN (CLASS 10, HEAT TREATED)  
6. 7W-7235 [2] BUTTON  
7. 8L-2777 [2] SEAL-O-RING  
8. 115-9403 [2] SHAFT AS  
    (EACH INCLUDES)
9. 3S-6605 [1] PLUG-CUP  
10. 096-0014 [1] PIN-SPRING  
11. 185-4461 [2] SUPPORT AS  
    (EACH INCLUDES)
12. 180-1538 [2] DOWEL  
13. 183-4365 M [4] SCREW-ADJUSTMENT (M10X1.5-THD)  
14. 2Y-5829 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP34420045
 

116-1091: SEAL GP-CRANKSHAFT

116-1091 SEAL GP-CRANKSHAFT -SINGLE LIP
FOR USE WITH DRY TRANSMISSIONS
i00479020 SEBP3442
1161091 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-2323 [1] COVER  
2. 8T-0640 M [6] BOLT (M6X1X30-MM)  
3. 5P-0537 [13] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 9X-2022 M [7] BOLT-LOCKING  
5. 7C-1583 [1] GASKET  
6. 107-6280 [1] SEAL-O-RING  
7. 7C-1728 [1] SEAL GP-CRANKSHAFT  
  M   METRIC PART
 

#SEBP34420046
 

129-2910: SUPPORT GP-ENGINE

129-2910 SUPPORT GP-ENGINE
FRONT
i00494719 SEBP3442
1292910 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-7327 [1] SUPPORT AS-FRONT  
2. 5P-8245 [8] WASHER-HARD (13.5X25.5X3MM THK)  
3. 6V-8336 M [8] BOLT (M12X1.75X70MM)  
  M   METRIC PART
 

#SEBP34420047
 

117-2749: VALVE MECHANISM GP

117-2749 VALVE MECHANISM GP
i00997769 SEBP3442
1172749 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8267 [4] WASHER (6.6X12X2MM THK)  
2. 8T-0275 M [4] BOLT (M6X1.0X50MM)  
3. 3E-4352 [8] WASHER-HARD (8.8X20.5X2.5MM THK)  
4. 8T-0100 M [16] BOLT (M8X1.25X60MM)  
5. 7C-8292 [8] ISOLATOR  
6. 9Y-7215 [8] SLEEVE-ISOLATOR  
7. 9Y-4357 [1] BREATHER AS (CRANKCASE)  
8. 9Y-1758 [1] GASKET-BREATHER (CRANKCASE)  
9. 102-5842 [1] BASE-VALVE COVER  
10. 109-5309 [1] GASKET-BASE (VALVE COVER)  
11. 115-9397 Y [3] ROCKER ARM GP  
12. 148-2063 CY [2] LIFTER GP-VALVE  
13. 104-3567 [12] PUSHROD-VALVE  
14. 104-3568 [6] PUSHROD  
15. 9M-1974 [9] WASHER-HARD (8.8X16X2MM THK)  
16. 6V-5217 M [1] BOLT (M8X1.25X20MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34420048
 

166-1329: BASE GP-OIL FILTER

166-1329 BASE GP-OIL FILTER -ENGINE
PART OF 117-2751 FILTER GP-ENGINE OIL
i01168060 SEBP3442
1661329 BASE GP-OIL FILTER Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
2. 166-1328 [1] BASE AS  
2A. 2P-4304 [1] STUD-TAPERLOCK  
2B. 3B-0623 [1] PLUG-CUP  
2C. 3P-1896 [2] PLUG-CUP  
2D. 7W-6390 [1] STUD-FILTER BASE  
3. 6V-4367 [3] SEAL-O-RING  
4. 6V-3940 M [3] BOLT (M8X1.25X25-MM)  
5. 7C-2891 [3] COVER  
6. 7C-3954 [1] SPRING AS  
7. 111-2645 [1] VALVE-PUMP BYPASS (ENGINE OIL FILTER)  
8. 6V-8359 M [1] BOLT (M6X1X70-MM)  
9. 7C-3083 [1] SEAT-RELIEF VALVE SPRING  
10. 7C-3082 [1] RETAINER  
11. 7C-3081 [1] SPACER (6.88X9.53X50-MM THK)  
12. 1A-2170 [1] SPRING-RETAINER  
13. 9M-0853 [2] PLUNGER-VALVE  
14. 7C-3953 [2] SPRING AS  
15. 9S-4185 [1] PLUG  
16. 8L-2786 [1] SEAL-O-RING  
17. 9X-2097 M [3] STUD (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP34420049
 

117-2786: COVER GP-OIL FILTER BASE

117-2786 COVER GP-OIL FILTER BASE -ENGINE
NO BYPASS
FOR USE WITH @@@@@115-2985@@@@@
i00492820 SEBP3442
1172786 COVER GP-OIL FILTER BASE Parts scheme
  For full view, you need register

Parts for your C-12 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-9542 [1] COVER-FILTER BASE  
2. 5S-9134 [1] SEAL-O-RING  
 

Information:

Engine News
A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Liner Projection
C-10 and C-12 Industrial Engines
Main Bearing Journal
C-10 and C-12 Industrial Engines
Cylinder Block
C-10 and C-12 Industrial Engines
Piston Cooling Jet
C-10 and C-12 Industrial Engines
Cylinder Liner
C-10 and C-12 Industrial Engines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN C-12 ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN C-12 ENGINE APPLICATIONS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Testing and Adjusting
Main Bearings - Inspect
C-10 and C-12 Industrial Engines
Cylinder Block - Inspect
C-10 and C-12 Industrial Engines
Cylinder Liner Projection - Inspect
C-10 and C-12 Industrial Engines
Excessive Bearing Wear - Inspect
C-10 and C-12 Industrial Engines
Disassembly and Assembly
Cylinder Liner - Install
C-10 and C-12 Industrial Engines
Piston Cooling Jets - Remove and Install
C-10 and C-12 Industrial Engines
Crankshaft Main Bearings - Remove
C-10 and C-12 Industrial Engines
Crankshaft Main Bearings - Install
C-10 and C-12 Industrial Engines
Cylinder Liner - Remove
C-10 and C-12 Industrial Engines
Camshaft Bearings - Install
C-10 and C-12 Industrial Engines
Camshaft Bearings - Remove
C-10 and C-12 Industrial Engines

Caterpillar Parts SIS Catalog C-12 :

PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
115-2984 PLUG GP-CYLINDER BLOCK
PISTON & ROD GP
130-0863 PISTON & ROD GP
PAN GP-OIL
126-0144 PAN GP-OIL
PAN GP-OIL
126-0144 PAN GP-OIL
MOUNTING GP-VALVE MECHANISM
116-5408 MOUNTING GP-VALVE MECHANISM
MOUNTING GP-FAN DRIVE
138-2550 MOUNTING GP-FAN DRIVE
MOUNTING GP-ALTERNATOR & COMPR
202-7961 MOUNTING GP-ALTERNATOR & COMPR
PLUG GP-FRONT HOUSING
116-5452 PLUG GP-FRONT HOUSING
PULLEY GP-ALTERNATOR
117-0177 PULLEY GP-ALTERNATOR
PULLEY GP-CRANKSHAFT
116-5444 PULLEY GP-CRANKSHAFT
ROCKER ARM GP
115-9397 ROCKER ARM GP
SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT
SUPPORT GP-ENGINE
129-2910 SUPPORT GP-ENGINE
VALVE MECHANISM GP
117-2749 VALVE MECHANISM GP
BASE GP-OIL FILTER
166-1329 BASE GP-OIL FILTER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.