BASIC ENGINE
VALVE MECHANISM GPCRANKSHAFT GP
MOUNTING GP-ENGINE
VALVE MECHANISM GP
COOLING SYSTEM
COOLER GPBASIC ENGINE
VALVE MECHANISM GP
#SEBP34430070
4P-5258: ROCKER ARM GP
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 006-7403 | [2] | RING-RETAINING | |
| 2. | 2N-7228 | [2] | WASHER (1X1.5X0.03-IN THK) | |
| 3. | 4N-0955 | [2] | DOWEL | |
| 4. | 2N-7229 | [2] | SPRING | |
| 5. | 4P-5261 | [1] | SHAFT AS-ARM | |
| 6. | 0L-1022 | [2] | PLUG-CUP | |
| 7. | 9Y-4384 | [2] | BRACKET-SHAFT | |
| 8. | 4P-5259 | [6] | ROCKER ARM AS | |
| 9. | 9Y-4383 | [1] | BRACKET-SHAFT | |
| 10. | 336-6781 | [6] | SCREW (3/8-24X4.78-IN) | |
| 11. | 9L-7712 | [6] | NUT (3/8-24-THD) | |
| 12. | 2N-7228 B | [2] | WASHER (1X1.5X0.03-IN THK) | |
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP34430071
319-0785: SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N CTS1-UP
PART OF 251-2303, 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
S/N CTS1-UP
PART OF 251-2303, 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-5868 J | [1] | SEAL-CRANKSHAFT (REAR) | |
| CRANKSHAFT SEAL 366-6004 IS AVAILABLE FOR FLOODED CONDITIONS | ||||
| J | FOR USE WITH DRY CLUTCH APPLICATIONS | |||
#SEBP34430072
319-7401: SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N CTS1-UP
PART OF 251-2303, 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
S/N CTS1-UP
PART OF 251-2303, 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) |
#SEBP34430073
9Y-1856: SUPPORT GP-ENGINE
9Y-1856 SUPPORT GP-ENGINE -FRONT
S/N CTS1-UP
S/N CTS1-UP
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS#SEBP34430074
9Y-3058: SUPPORT GP-ENGINE
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS#SEBP34430075
6I-2077: VALVE MECHANISM GP
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-5258 Y | [2] | ROCKER ARM GP | |
| 2. | 7W-8300 | [6] | FASTENER GP-VALVE MECHANISM | |
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 236-0485 | [1] | BOLT-12 POINT HEAD (3/4-16X11.5-IN) | ||
| 3. | 6N-6872 | [12] | SPRING-GUIDE | |
| 4. | 101-1816 | [6] | BRIDGE AS-VALVE (INLET) | |
| (EACH INCLUDES) | ||||
| 4A. | 2N-5842 | [1] | SCREW (3/8-24X1-IN) | |
| 4B. | 9L-7712 | [1] | NUT (3/8-24-THD) | |
| 4C. | 101-1819 | [1] | SEAT-WEAR | |
| 5. | 101-1818 | [6] | BRIDGE AS-EXHAUST | |
| (EACH INCLUDES) | ||||
| 5A. | 9L-7712 | [1] | NUT (3/8-24-THD) | |
| 5B. | 2N-5842 | [1] | SCREW (3/8-24X1-IN) | |
| 5C. | 101-1819 | [1] | SEAT-WEAR | |
| 6. | 4W-5998 | [12] | PUSHROD AS | |
| 7. | 422-3884 | [12] | LIFTER AS-VALVE | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34430076
6I-2077: VALVE MECHANISM GP
6I-2077 VALVE MECHANISM GP
S/N CTS1-747
S/N CTS1-747
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-5258 Y | [2] | ROCKER ARM GP | |
| 2. | 305-6843 | [12] | SPRING-GUIDE | |
| 3. | 101-1816 | [6] | BRIDGE AS-VALVE (INLET) | |
| (EACH INCLUDES) | ||||
| 3A. | 2N-5842 | [1] | SCREW (3/8-24X1-IN) | |
| 3B. | 9L-7712 | [1] | NUT (3/8-24-THD) | |
| 3C. | 101-1819 | [1] | SEAT-WEAR | |
| 4. | 101-1818 | [6] | BRIDGE AS-EXHAUST | |
| (EACH INCLUDES) | ||||
| 4A. | 2N-5842 | [1] | SCREW (3/8-24X1-IN) | |
| 4B. | 9L-7712 | [1] | NUT (3/8-24-THD) | |
| 4C. | 101-1819 | [1] | SEAT-WEAR | |
| 5. | 105-5139 | [12] | LIFTER AS-VALVE | |
| 6. | 213-7538 C | [12] | ROD | |
| 7. | 234-9558 | [6] | BOLT-12 POINT HEAD (3/4-16X12-IN) | |
| 8. | 5H-1504 C | [6] | WASHER-HARD (20X33.5X5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34430077
6I-2077: VALVE MECHANISM GP
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-5258 Y | [2] | ROCKER ARM GP | |
| 2. | 305-6843 | [12] | SPRING-GUIDE | |
| 3. | 100-6889 C | [12] | BRIDGE-VALVE | |
| 4. | 5H-1504 | [6] | WASHER-HARD (20X33.5X5-MM THK) | |
| 5. | 422-3884 | [12] | LIFTER AS-VALVE | |
| 6. | 213-7538 | [12] | ROD | |
| 7. | 234-9558 | [6] | BOLT-12 POINT HEAD (3/4-16X12-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34430078
121-2471: BASE GP-OIL FILTER
121-2471 BASE GP-OIL FILTER -ENGINE
S/N CTS1-UP
PART OF 209-8349 BASE GP-OIL FILTER, 155-4800 FILTER GP-ENGINE OIL
S/N CTS1-UP
PART OF 209-8349 BASE GP-OIL FILTER, 155-4800 FILTER GP-ENGINE OIL
For full view, you need register
Parts for your G3406 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 176-1363 CY | [1] | BASE GP-OIL FILTER (ENGINE) | |
| 2. | 183-3407 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 3. | 214-7568 | [2] | SEAL-O-RING | |
| 4. | 5P-3501 | [1] | ADAPTER | |
| 5. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 6. | 392-9208 | [2] | PLUNGER-VALVE (RELIEF) | |
| 7. | 4N-8150 | [2] | SPRING | |
| 8. | 319-6234 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-9334 | [1] | PLUG | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34430079
176-1363: BASE GP-OIL FILTER
176-1363 BASE GP-OIL FILTER -ENGINE
S/N CTS1-UP
PART OF 121-2471 BASE GP-OIL FILTER
S/N CTS1-UP
PART OF 121-2471 BASE GP-OIL FILTER
For full view, you need register
