223-1553 ENGINE AR S/N 3PD472-UP 966G II WHEEL LOADER

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
236-0963 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
228-2769 Y	[1]	COVER GP-CYLINDER BLOCK
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
169-4188 Y	[1]	CRANKSHAFT GP
226-4913 Y	[1]	CYLINDER BLOCK GP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
185-5803 Y	[1]	FLYWHEEL GP
236-5035 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
117-2750 Y	[1]	GEAR GP-FRONT
236-4891 Y	[1]	HOUSING & REGULATOR GP
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
138-2550 Y	[1]	MOUNTING GP-FAN DRIVE
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
132-3203 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
190-6017 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
277-7764 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR
201-5168	[1]	ELECTRONICS GP-ENGINE RATINGS

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
415-8631 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
417-9508 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1440 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1461 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP34870011

223-1556: ENGINE AR

ENGINE AR

223-1556 ENGINE AR
S/N 3PD472-UP
PART OF 214-4568 GENERAL AR

i02436543 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
200-5026 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
		S/N 3PD472-5551
236-0963 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
		S/N 3PD5552-UP
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
170-6487 Y	[1]	COVER GP-CYLINDER BLOCK
		S/N 3PD472-2342
228-2769 Y	[1]	COVER GP-CYLINDER BLOCK
		S/N 3PD2343-UP
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
169-4188 Y	[1]	CRANKSHAFT GP
180-6662 Y	[1]	CYLINDER BLOCK GP
		S/N 3PD472-2342
226-4913 Y	[1]	CYLINDER BLOCK GP
		S/N 3PD2343-UP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
185-5803 Y	[1]	FLYWHEEL GP
185-5873 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
		S/N 3PD472-4675
236-5035 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
		S/N 3PD4676-UP
117-2750 Y	[1]	GEAR GP-FRONT
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
138-2550 Y	[1]	MOUNTING GP-FAN DRIVE
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
132-3203 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
190-6017 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
216-8361 Y	[1]	HOUSING & REGULATOR GP
		S/N 3PD472-4153
236-4891 Y	[1]	HOUSING & REGULATOR GP
		S/N 3PD4154-UP
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
191-2925 Y	[1]	TURBOCHARGER GP
		S/N 3PD472-16043
277-7764 Y	[1]	TURBOCHARGER GP
		S/N 3PD16044-UP
117-2749 Y	[1]	VALVE MECHANISM GP
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR
201-5168	[1]	ELECTRONICS GP-ENGINE RATINGS

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
415-8631 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
417-9508 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1440 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1461 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP34870012

180-3196: INSTALLATION AR-ENGINE

INSTALLATION AR-ENGINE

180-3196 INSTALLATION AR-ENGINE
S/N ANT1-UP
PART OF 214-4568 GENERAL AR

i02052415 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
188-0800 Y	[1]	AIR CLEANER GP
185-5877 Y	[1]	ALTERNATOR GP-CHARGING
		S/N ANT1-143
220-1861 Y	[1]	ALTERNATOR GP-CHARGING
		S/N ANT144-UP
185-5869 Y	[1]	BELT TENSIONER GP
		S/N ANT1-143
220-1857 Y	[1]	BELT TENSIONER GP
		S/N ANT144-203
232-7375 Y	[1]	BELT TENSIONER GP
		S/N ANT204-UP
188-3521 Y	[1]	DUST EJECTOR GP
Y	[1]	EXTENSION GP-EXHAUST
188-3520 Y	[1]	FUMES DISPOSAL GP
188-0789 Y	[1]	LINES GP-AIR
220-0178 Y	[1]	MOUNTING GP-ALTERNATOR
		S/N ANT144-203
232-7374 Y	[1]	MOUNTING GP-ALTERNATOR
		S/N ANT204-UP
185-5298 Y	[1]	MOUNTING GP-ENGINE & XMSN
188-0249 Y	[1]	MUFFLER GP
185-7250 Y	[1]	PULLEY GP-IDLER
		S/N ANT1-143
217-5214 Y	[1]	STARTING MOTOR GP-ELECTRIC
Y		SEPARATE ILLUSTRATION

#SEBP34870013

185-5869: BELT TENSIONER GP

BELT TENSIONER GP

185-5869 BELT TENSIONER GP
S/N ANT1-143
PART OF 180-3196 INSTALLATION AR-ENGINE

i01467348 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-7023	[2]	PULLEY AS-IDLER
			(EACH INCLUDES)
1A.	151-2898	[1]	SPACER (10.4X38.1X20-MM THK)
1B.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
1C.	166-6358	[1]	COVER-DUST
2.	173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
2A.	173-1500	[1]	SPACER (10.4X45.1X1.8-MM THK)
2B.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
2C.	166-6358	[1]	COVER-DUST
3.	189-2218	[1]	BELT-SERPENTINE
4.	193-7732	[1]	BELT TENSIONER
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP34870014

220-1857: BELT TENSIONER GP

BELT TENSIONER GP

220-1857 BELT TENSIONER GP
S/N ANT144-203
PART OF 180-3196 INSTALLATION AR-ENGINE

i01801498 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-1498	[2]	PULLEY AS-IDLER (8-GROOVE)(8 GROOVES)
	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
	166-6358	[1]	COVER-DUST
	173-1500	[1]	SPACER (10.4X45.1X1.8-MM THK)
2.	190-0643	[1]	BELT TENSIONER GP
3.	220-1856	[1]	BELT-SERPENTINE
4.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP34870015

232-7375: BELT TENSIONER GP

BELT TENSIONER GP

232-7375 BELT TENSIONER GP
S/N ANT204-302
PART OF 180-3196 INSTALLATION AR-ENGINE

i02052424 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
1A.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
1B.	166-6358	[1]	COVER-DUST
2.	197-9641	[2]	PULLEY AS-IDLER
3.	226-9380	[1]	BELT-SERPENTINE
4.	233-8686	[1]	BELT TENSIONER
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP34870016

232-7375: BELT TENSIONER GP

BELT TENSIONER GP

232-7375 BELT TENSIONER GP
S/N ANT303-UP
PART OF 180-3196 INSTALLATION AR-ENGINE

i02504841 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
1A.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
1B.	166-6358	[1]	COVER-DUST
2.	197-9641	[2]	PULLEY AS-IDLER
3.	260-6107 C	[1]	BELT-SERPENTINE
4.	233-8686	[1]	BELT TENSIONER
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP34870017

171-3062: CAMSHAFT GP

CAMSHAFT GP

171-3062 CAMSHAFT GP
S/N 3PD472-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR

i01266165 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5217 M	[5]	BOLT (M8X1.25X20-MM)
2.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
3.	178-3643	[1]	PIN-THRUST
4.	133-7068	[1]	GASKET-CAMSHAFT COVER
5.	171-3063	[1]	CAMSHAFT AS
5A.	1B-8705	[1]	KEY-WOODRUFF
5B.	133-7100	[1]	GEAR-CAMSHAFT DRIVE (96-TEETH)
6.	4K-9841	[1]	WASHER (0.406X0.75X0.064-IN THK)
7.	118-0459	[1]	COVER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP34870018

170-6487: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

170-6487 COVER GP-CYLINDER BLOCK
S/N 3PD472-UP
PART OF 180-3191, 220-0794, 223-1556 ENGINE AR

i01462231 SEBP3487

1706487 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-1445	[3]	COVER
2.	061-9455	[3]	SEAL-O-RING
3.	1H-7339	[1]	SEAL-O-RING
4.	4P-1650	[1]	COVER
5.	4P-6587	[1]	COVER
6.	5S-9134	[1]	SEAL-O-RING
7.	6V-1250	[1]	SEAL-O-RING
8.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
9.	6V-5217 M	[6]	BOLT (M8X1.25X20-MM)
10.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
11.	7C-9542	[1]	COVER-FILTER BASE
12.	9M-1974	[8]	WASHER-HARD (8.8X16X2-MM THK)
13.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART

#SEBP34870019

228-2769: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

228-2769 COVER GP-CYLINDER BLOCK
S/N 3PD2343-UP
PART OF 223-1553, 223-1556 ENGINE AR

i01891397 SEBP3487

2282769 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-4039	[1]	CAP
2.	7C-1445	[2]	COVER
3.	7C-9542	[1]	COVER-FILTER BASE
4.	9X-2097 M	[2]	STUD (M8X1.25-THD)
5.	061-9455	[2]	SEAL-O-RING
6.	107-5769	[1]	SEAL-O-RING
7.	133-9116	[1]	COVER
8.	4P-6587	[1]	COVER
9.	5P-7970 M	[1]	NUT (M8X1.25-THD)
10.	5S-9134	[1]	SEAL-O-RING
11.	6V-1250	[1]	SEAL-O-RING
12.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
13.	6V-5217 M	[4]	BOLT (M8X1.25X20-MM)
14.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
15.	9M-1974	[8]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

Engine Design
3176C and 3196 Engines for Caterpillar Built Machines

General Information
3176C and 3196 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Contamination Control Guidelines

Troubleshooting

Engine Will Not Crank
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Low Engine Oil Pressure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Stalls at Low RPM
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Excessive White Smoke
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Excessive Black Smoke
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Excessive White Smoke
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Low Power/Poor or No Response to Throttle
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Poor Acceleration or Response
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Overspeeds on Start-up
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Cranks but Will Not Start
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Poor Acceleration or Response
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

E190 Engine Overspeed Warning
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Low Power/Poor or No Response to Throttle
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Diagnostic Codes
3176C and 3196 Engines for Caterpillar Built Machines

Engine Cranks but Will Not Start
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

E190 Engine Overspeed Warning
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Low Power/Poor or No Response to Throttle
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Vibration
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Excessive Fuel Consumption
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Misfires, Runs Rough or Is Unstable
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Will Not Crank
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18