AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

190-6017 PUMP GP-FUEL INJECTION S/N 3PD472-21419 PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR 966G II


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
FILTER GP-FUEL
TANK GP-FUEL
VALVE GP-CHECK

WHEEL LOADER 966G II WHEEL LOADER ANT
 966G II Wheel Loader ANT00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3487 966G II ANT   (1999)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
190-6017 PUMP GP-FUEL INJECTION
 

#SEBP34870130
 

190-6017: PUMP GP-FUEL INJECTION

190-6017 PUMP GP-FUEL INJECTION
S/N 3PD472-21419
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i01364047 SEBP3487
1906017 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-3001 M [1] BOLT (8X1.25X7-MM)  
2. 317-5278 [1] INJECTOR GP-FUEL  
2A. 9X-7317 J [1] SEAL-O-RING  
2B. 119-8784 J [1] SEAL-O-RING  
2C. 215-3198 J [1] SEAL-O-RING  
3. 7C-8851 [1] CLAMP-INJECTOR  
4. 4P-8525 [1] SPACER (9X16X30-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  224-5797 J [1] KIT-GASKET (SINGLE FUEL INJECTOR)  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP34870131
 

191-0789: PUMP GP-FUEL PRIMING

191-0789 PUMP GP-FUEL PRIMING
S/N 3PD472-UP
ELECTRIC
PART OF 223-1556 ENGINE AR
i01462651 SEBP3487
1910789 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9655 [6] MOUNT-ISOLATION  
2. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP CONTROL)  
3. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP  
4. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
5. 191-1783 [2] SPACER (8.5X12.7X87.3-MM THK)  
6. 199-5107 [1] BRACKET AS  
  8T-3612 M [8] NUT-WELD (M8X1.25-THD)  
7. 200-1299 I [1] HOSE AS  
8. 205-7388 [1] BRACKET  
9. 209-7659 [1] PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF)  
10. 209-8441 [1] HARNESS AS-PUMP (FUEL PRIMING)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
11. 030-7964 [1] ELBOW  
12. 130-5300 [1] CLIP  
13. 6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING (LARGE)  
  6V-8398 [1] SEAL-O-RING (SMALL)  
14. 164-5619 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
15. 3S-8665 [1] CLIP (LOOP)  
16. 3V-0409 [1] SPACER (0.423X0.675X1.25-IN THK)  
17. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
18. 7X-2539 M [2] BOLT (M8X1.25X110-MM)  
19. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
20. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4178 M [2] BOLT (M10X1.5X90-MM)  
22. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
23. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
24. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
25. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
26. 8M-2771 [1] CLIP  
27. 6V-8721 [1] ELBOW  
28. 2M-9780 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34870132
 

191-0789: PUMP GP-FUEL PRIMING

191-0789 PUMP GP-FUEL PRIMING
S/N 3PD472-2922
ELECTRIC
PART OF 223-1556 ENGINE AR
i01810636 SEBP3487
1910789 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9655 [6] MOUNT-ISOLATION  
2. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP CONTROL)  
3. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP  
4. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
5. 191-1783 [2] SPACER (8.5X12.7X87.3-MM THK)  
6. 225-1283 [1] BRACKET AS  
  8T-3612 M [5] NUT-WELD (M8X1.25-THD)  
7. 200-1299 I [1] HOSE AS  
8. 205-7388 [1] BRACKET  
9. 209-7659 [1] PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF)  
10. 209-8441 [1] HARNESS AS-PUMP (FUEL PRIMING)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
11. 030-7964 [1] ELBOW  
12. 130-5300 [1] CLIP  
13. 6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING (LARGE)  
  6V-8398 [1] SEAL-O-RING (SMALL)  
14. 164-5619 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
15. 3S-8665 [1] CLIP (LOOP)  
16. 3V-0409 [1] SPACER (0.423X0.675X1.25-IN THK)  
17. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
18. 7X-2539 M [2] BOLT (M8X1.25X110-MM)  
19. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
20. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4178 M [2] BOLT (M10X1.5X90-MM)  
22. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
23. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
24. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
25. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
26. 4D-7794 [1] CLIP  
27. 6V-8721 [1] ELBOW  
28. 2M-9780 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34870133
 

191-0789: PUMP GP-FUEL PRIMING

191-0789 PUMP GP-FUEL PRIMING
S/N 3PD2923-6784
ELECTRIC
PART OF 223-1556 ENGINE AR
i01960684 SEBP3487
1910789 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9655 [6] MOUNT-ISOLATION  
2. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP CONTROL)  
3. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP  
4. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
5. 191-1783 [2] SPACER (8.5X12.7X87.3-MM THK)  
6. 225-1283 [1] BRACKET AS  
  8T-3612 M [5] NUT-WELD (M8X1.25-THD)  
7. 200-1299 I [1] HOSE AS  
8. 205-7388 [1] BRACKET  
9. 209-7659 [1] PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF)  
10. 209-8441 [1] HARNESS AS-PUMP (FUEL PRIMING)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
11. 030-7964 [1] ELBOW  
12. 130-5300 [1] CLIP  
13. 6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING (LARGE)  
  6V-8398 [1] SEAL-O-RING (SMALL)  
14. 164-5619 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
15. 3S-8665 [1] CLIP (LOOP)  
16. 3V-0409 [1] SPACER (0.423X0.675X1.25-IN THK)  
17. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
18. 7X-2539 M [2] BOLT (M8X1.25X110-MM)  
19. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
20. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4178 M [2] BOLT (M10X1.5X90-MM)  
22. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
23. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
24. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
25. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
26. 4D-7794 [1] CLIP  
27. 6V-8721 [1] ELBOW  
28. 2M-9780 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34870134
 

191-0789: PUMP GP-FUEL PRIMING

191-0789 PUMP GP-FUEL PRIMING
S/N 3PD6785-UP
ELECTRIC
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i02044793 SEBP3487
1910789 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9655 C [8] MOUNT-ISOLATION  
2. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP CONTROL)  
3. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP  
4. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
5. 200-1299 I [1] HOSE AS  
6. 209-7659 [1] PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF)  
7. 209-8441 [1] HARNESS AS-PUMP (FUEL PRIMING)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
8. 225-1283 [1] BRACKET AS  
  8T-3612 M [5] NUT-WELD (M8X1.25-THD)  
9. 232-1374 C [1] BRACKET  
10. 232-1376 C [2] SPACER (8.5X12.7X139.1-MM THK)  
11. 130-5300 [1] CLIP  
12. 148-8358 [1] ELBOW AS  
  6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING (LARGE)  
  6V-8398 [1] SEAL-O-RING (SMALL)  
13. 164-5619 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 3E-8005 CM [2] BOLT (M8X1.25X160-MM)  
16. 3S-8665 [1] CLIP (LOOP)  
17. 3V-0409 [1] SPACER (0.423X0.675X1.25-IN THK)  
18. 6V-4249 CM [1] BOLT (M10X1.5X50-MM)  
19. 6V-5217 CM [1] BOLT (M8X1.25X20-MM)  
20. 6V-5839 C [3] WASHER (11X21X2.5-MM THK)  
21. 6V-8398 [1] SEAL-O-RING  
22. 6V-8721 [1] ELBOW  
23. 6V-9830 [1] CAP  
24. 8T-0100 CM [1] BOLT (M8X1.25X60-MM)  
25. 8T-0644 CM [2] BOLT (M10X1.5X90-MM)  
26. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
27. 9N-0869 C [3] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34870135
 

190-8977: PUMP GP-FUEL PRM & WATER SEP

190-8977 PUMP GP-FUEL PRM & WATER SEP -PRIMARY FUEL FILTER
S/N 3PD472-UP
PART OF 191-0789 PUMP GP-FUEL PRIMING
i01420567 SEBP3487
1908977 PUMP GP-FUEL PRM & WATER SEP Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9570 Y [1] FILTER GP-WATER SEP & FUEL (PRIMARY)  
2. 190-8970 [1] PUMP GP-FUEL PRIMING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP34870136
 

184-4720: TANK GP-FUEL

184-4720 TANK GP-FUEL
S/N ANT1-UP
PART OF 214-4573 CHASSIS AR
i01573407 SEBP3487
1844720 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-8306 [1] SCREW-PURGE (1/2-20X1.625-IN)  
2. 101-8909 [1] CAP AS-FILLER (FUEL TANK)  
3. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
4. 187-7331 [8] MOUNT-RUBBER  
5. 322-7451 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 184-4719 [1] TANK AS-FUEL  
7. 7M-8485 [1] SEAL-O-RING  
8. 7X-0607 [4] WASHER-HARD (20X55X8-MM THK)  
9. 7X-2554 M [4] BOLT (M16X2X70-MM)  
10. 8C-3210 M [5] BOLT (M6X1X16-MM)  
11. 9S-9334 [1] PLUG  
12. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
13. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
14. 1U-8846 B [2] SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP34870137
 

156-5783: VALVE GP-CHECK

156-5783 VALVE GP-CHECK -FUEL
S/N 3PD472-UP
PART OF 191-0788 LINES GP-FUEL
i01226449 SEBP3487
1565783 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-6923 [1] RING-BACKUP  
2. 033-6033 [1] SEAL-O-RING  
 

#SEBP34870138
 

233-6742: VALVE GP-CHECK

233-6742 VALVE GP-CHECK -FUEL
S/N 3PD5552-16170
PART OF 191-0788 LINES GP-FUEL
i01935774 SEBP3487
2336742 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 238-0296 Y [1] VALVE GP-CHECK (FUEL)  
2. 6V-4589 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP34870139
 

233-6742: VALVE GP-CHECK

233-6742 VALVE GP-CHECK -FUEL
S/N 3PD16171-UP
PART OF 191-0788 LINES GP-FUEL
i02443795 SEBP3487
2336742 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 281-2725 CY [1] VALVE GP-CHECK (FUEL)  
2. 238-5081 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Testing and Adjusting
Electronic Unit Injector - Adjust
3176C and 3196 Engines for Caterpillar Built Machines
Electronic Unit Injector - Test
3176C and 3196 Engines for Caterpillar Built Machines
Troubleshooting
Injector Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Injector Code - Calibrate
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0001 FMI 11 Cylinder #1 Injector fault
3176C and 3196 Engines for Caterpillar Built Machines
CID 0002 FMI 11 Cylinder #2 Injector fault
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0003 FMI 11 Cylinder #3 Injector fault
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0004 FMI 11 Cylinder #4 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0006 FMI 11 Cylinder #6 Injector fault
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0001 FMI 11 Cylinder #1 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0002 FMI 11 Cylinder #2 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0003 FMI 11 Cylinder #3 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0004 FMI 11 Cylinder #4 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0006 FMI 11 Cylinder #6 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Disassembly and Assembly
Electronic Unit Injector - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Electronic Unit Injector - Install
3176C and 3196 Engines For Caterpillar Built Machines
Service Magazine
Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
2003/10/20
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 966G II :

PUMP & MTG GP-FUEL TRANSFER
206-7336 PUMP & MTG GP-FUEL TRANSFER
PUMP & MTG GP-FUEL TRANSFER
206-7336 PUMP & MTG GP-FUEL TRANSFER
LINES GP-FUEL
191-0788 LINES GP-FUEL
LINES GP-FUEL
191-0788 LINES GP-FUEL
LINES GP-FUEL
191-0788 LINES GP-FUEL
LINES GP-FUEL
180-0607 LINES GP-FUEL
LINES GP-FUEL
180-0607 LINES GP-FUEL
LINES GP-FUEL
180-0607 LINES GP-FUEL
PUMP GP-FUEL PRIMING
191-0789 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
191-0789 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
191-0789 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
191-0789 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRM & WATER SEP
190-8977 PUMP GP-FUEL PRM & WATER SEP
TANK GP-FUEL
184-4720 TANK GP-FUEL
VALVE GP-CHECK
156-5783 VALVE GP-CHECK
VALVE GP-CHECK
233-6742 VALVE GP-CHECK

Truck sale:

Caterpillar 966GII, Construction
64,000 USD 
Caterpillar 966GII, Construction
- Wheel Loaders
H.O. PENN MACHINERY CO., INC.
Caterpillar 966GII, Construction
 
Caterpillar 966GII, Construction
- Wheel Loaders
NMC
Caterpillar 966GII, Construction
55,000 
Caterpillar 966GII, Construction
- Wheel Loaders
NMC
Caterpillar 966GII, Construction
75,800 
Caterpillar 966GII, Construction
- Wheel Loaders
EMPIRE MACHINERY
Caterpillar 966GII, Construction
73,750 
Caterpillar 966GII, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.