ELECTRICAL AND STARTING SYSTEM
LIGHTING GPSENSOR GP
CIRCUIT BREAKER GP
RADIO GP
RECEPTACLE GP-AUXILIARY START
SENSOR GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
#SEBP34870230
197-4150: LIGHTING GP-WARNING BEACON
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 119-8984 | [1] | HARNESS AS-LIGHTING | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 3. | 128-6983 Y | [1] | LAMP GP-WARNING BEACON (24-VOLT) | |
| 4. | 219-9522 | [1] | SWITCH AS-ROCKER (WARNING BEACON) | |
| 5. | 204-7851 | [1] | BRACKET AS | |
| 6. | 6V-6635 | [4] | SCREW-PAN HEAD (10-14X0.5-IN) | |
| 7. | 9M-5870 | [1] | GROMMET | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870231
197-4150: LIGHTING GP-WARNING BEACON
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 119-8984 | [1] | HARNESS AS-LIGHTING | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 3. | 235-3937 CY | [1] | LAMP GP-WARNING BEACON (24-VOLT, AMBER, ROTATING) | |
| 4. | 219-9522 | [1] | SWITCH AS-ROCKER (WARNING BEACON) | |
| 5. | 204-7851 | [1] | BRACKET AS | |
| 6. | 6V-6635 | [4] | SCREW-PAN HEAD (10-14X0.5-IN) | |
| 7. | 9M-5870 | [1] | GROMMET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870232
137-0269: MOUNTING GP-PRESSURE SENSOR
137-0269 MOUNTING GP-PRESSURE SENSOR -AUTODIG, PAYLOAD
S/N ANT1-UP
PART OF 184-4924 CONTROL AR-AUTODIG, 184-4928 MONITOR AR-PAYLOAD
S/N ANT1-UP
PART OF 184-4924 CONTROL AR-AUTODIG, 184-4928 MONITOR AR-PAYLOAD
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34870233
189-8690: PANEL GP-CIRCUIT BREAKER
189-8690 PANEL GP-CIRCUIT BREAKER
S/N ANT1-UP
PART OF 180-3563 WIRING GP-CHASSIS
S/N ANT1-UP
PART OF 180-3563 WIRING GP-CHASSIS
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 149-2612 | [1] | RELAY AS (24-VOLT)(HOOD TILT MOTOR) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 3E-5239 | [1] | RELAY AS (24-VOLT)(ETHER STARTING AID RELAY) | |
| 3. | 3S-2093 | [2] | STRAP-CABLE | |
| 4. | 7V-9275 | [1] | STRAP | |
| 5. | 125-1302 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 6. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR) | |
| 6A. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(MAIN) | |
| (EACH INCLUDES) | ||||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 7. | 185-3376 | [1] | PLATE AS | |
| 8. | 186-3221 | [1] | WIRE AS | |
| 9. | 186-3223 | [1] | PLATE AS | |
| 10. | 188-9741 | [1] | COVER | |
| 11. | 190-5442 | [1] | PLATE-FUSE | |
| 12. | 190-5443 | [1] | PLATE-FUSE | |
| 13. | 190-5444 | [1] | PLATE-FUSE | |
| 14. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 15. | 229-2045 | [1] | HARNESS AS-PANEL (CIRCUIT BREAKER) | |
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [11] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [7] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 8N-1533 | [1] | PLUG AS-CONNECTOR (7-PIN) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 9X-7147 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 16. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 17. | 130-5300 | [3] | CLIP | |
| 18. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 19. | 4P-8134 | [1] | CLIP (LADDER) | |
| 20. | 5C-9553 M | [6] | BOLT (M6X1X16-MM) | |
| 21. | 5L-4507 | [4] | SCREW-MACHINE (10-32X0.875-IN) | |
| 22. | 5M-6668 | [8] | SCREW-MACHINE (8-32X0.75-IN) | |
| 23. | 5P-7970 M | [4] | NUT (M8X1.25-THD) | |
| 24. | 6T-3643 | [1] | CIRCUIT BREAKER AS (15-AMPERE)(ENGINE ECM) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 25. | 6T-3644 | [1] | CIRCUIT BREAKER AS (20-AMPERE) | |
| UNSWITCHED BATTERY POWER TO CAB | ||||
| 25A. | 6T-3644 | [1] | CIRCUIT BREAKER AS (20-AMPERE)(HOOD TILT ACTUATOR) | |
| (EACH INCLUDES) | ||||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 26. | 6V-1889 | [1] | CLIP (LOOP) | |
| 27. | 7K-1181 | [1] | STRAP-CABLE | |
| 28. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 30. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 31. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 32. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 33. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 34. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870234
336-3545: RADIO GP-COMMUNICATION
336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N ANT1-UP
PART OF 257-0428, 273-5723 INSTALLATION GP-COMMUNICATION
S/N ANT1-UP
PART OF 257-0428, 273-5723 INSTALLATION GP-COMMUNICATION
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 499-3794 | [1] | SOFTWARE GP-COMMUNICATION (PRODUCT LINK 121SR) |
#SEBP34870235
189-5519: RECEPTACLE GP-AUXILIARY START
189-5519 RECEPTACLE GP-AUXILIARY START
S/N ANT1-274
S/N ANT1-274
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 4H-1225 | [2] | WASHER (11X22X6-MM THK) | |
| 3. | 6V-4611 | [1] | FILM-WARNING (JUMP START, READ OMM) | |
| 4. | 8S-2634 | [1] | COVER AS | |
| 2P-2975 | [2] | SEAL-O-RING | ||
| 5. | 8C-6358 | [1] | BLOCK AS-JUNCTION (BATTERY) | |
| 1D-5117 | [3] | NUT-JAM (1/2-13-THD) | ||
| 8T-3519 | [3] | BOLT-BRONZE (1/2-13X2-IN) | ||
| 6. | 118-6878 | [1] | BRACKET AS | |
| 7. | 121-7848 | [2] | PLATE | |
| 8. | 122-0493 | [1] | COVER | |
| 9. | 189-6323 | [1] | RECEPTACLE AS | |
| 10. | 198-6754 | [1] | CABLE AS | |
| 11. | 199-0628 | [1] | CABLE AS | |
| 5P-0761 E | CABLE (00-GA, RED)(69-CM) | |||
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 12. | 205-7299 | [3] | CLIP | |
| 13. | 2A-2677 | [1] | SPACER (10.7X17.14X19.05-MM THK) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 19. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 20. | 7F-0560 | [4] | WASHER (0.516X0.938X0.101-IN THK) | |
| 21. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP34870236
189-5519: RECEPTACLE GP-AUXILIARY START
189-5519 RECEPTACLE GP-AUXILIARY START
S/N ANT1-UP
PART OF 257-2193, 267-2096 MACHINE AR
S/N ANT1-UP
PART OF 257-2193, 267-2096 MACHINE AR
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 4H-1225 | [2] | WASHER (11X22X6-MM THK) | |
| 3. | 6V-4611 | [1] | FILM-WARNING (JUMP START, READ OMM) | |
| 4. | 8S-2634 | [1] | COVER AS | |
| 2P-2975 | [2] | SEAL-O-RING | ||
| 5. | 9W-0742 Y | [1] | BLOCK GP-JUNCTION (BATTERY) | |
| 6. | 118-6878 | [1] | BRACKET AS | |
| 7. | 121-7848 | [2] | PLATE | |
| 8. | 122-0493 | [1] | COVER | |
| 9. | 189-6323 | [1] | RECEPTACLE AS | |
| 10. | 198-6754 | [1] | CABLE AS | |
| 11. | 199-0628 | [1] | CABLE AS | |
| 5P-0761 E | CABLE (00-GA, RED)(69-CM) | |||
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 12. | 205-7299 | [3] | CLIP | |
| 13. | 2A-2677 | [1] | SPACER (10.7X17.14X19.05-MM THK) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 19. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870237
179-9375: SENSOR & MTG GP-LIFT POSITION
179-9375 SENSOR & MTG GP-LIFT POSITION
S/N ANT1-185
PART OF 180-0576 ELECTRICAL AR
S/N ANT1-185
PART OF 180-0576 ELECTRICAL AR
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-7662 | [2] | ROD END | |
| 2. | 6C-3997 | [3] | SPACER (15X20X10-MM THK) | |
| 3. | 130-5300 | [1] | CLIP | |
| 4. | 166-0599 | [1] | ROD | |
| 5. | 169-0417 Y | [1] | SENSOR GP-POSITION (LIFT) | |
| 6. | 179-7000 | [1] | ARM | |
| 7. | 214-3616 | [1] | PLATE | |
| 8. | 214-3617 | [1] | PLATE | |
| 9. | 199-4064 | [1] | BRACKET AS | |
| 10. | 160-8500 M | [4] | NUT (M8X1.25-THD) | |
| 11. | 5C-7261 M | [5] | NUT (M8X1.25-THD) | |
| 12. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 13. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 15. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 20. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870238
179-9375: SENSOR & MTG GP-LIFT POSITION
179-9375 SENSOR & MTG GP-LIFT POSITION
S/N ANT186-UP
PART OF 180-0576 ELECTRICAL AR
S/N ANT186-UP
PART OF 180-0576 ELECTRICAL AR
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-3997 | [3] | SPACER (15X20X10-MM THK) | |
| 2. | 166-0599 | [1] | ROD | |
| 3. | 169-0417 Y | [1] | SENSOR GP-POSITION (LIFT) | |
| 4. | 179-7000 | [1] | ARM | |
| 5. | 199-4064 | [1] | BRACKET AS | |
| 6. | 214-3616 | [1] | PLATE | |
| 7. | 214-3617 | [1] | PLATE | |
| 8. | 130-5300 | [1] | CLIP | |
| 9. | 160-8500 M | [2] | NUT (M8X1.25-THD) | |
| 10. | 5C-7261 M | [5] | NUT (M8X1.25-THD) | |
| 11. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 12. | 7X-7662 | [2] | ROD END | |
| 13. | 8T-4121 C | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 CM | [3] | NUT (M10X1.5-THD) | |
| 15. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 20. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870239
179-9378: SENSOR & MTG GP-TILT POSITION
179-9378 SENSOR & MTG GP-TILT POSITION
S/N ANT1-UP
PART OF 180-0576 ELECTRICAL AR
S/N ANT1-UP
PART OF 180-0576 ELECTRICAL AR
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-1939 | [4] | CLAMP | |
| 2. | 5V-6439 | [2] | PLATE | |
| 3. | 7X-7662 | [2] | ROD END | |
| 4. | 130-5300 | [1] | CLIP | |
| 5. | 169-0417 Y | [1] | SENSOR GP-POSITION (TILT) | |
| 6. | 178-3051 | [1] | HARNESS AS-SENSOR (TILT POSITION) | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (KIT INCLUDES RECEPTACLE & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (KIT INCLUDES PLUG & WEDGE) | ||||
| 7. | 214-3616 | [1] | PLATE | |
| 8. | 214-3617 | [1] | PLATE | |
| 9. | 166-0599 | [1] | ROD | |
| 10. | 208-3906 | [1] | ARM AS-BAIL | |
| 11. | 212-8810 | [1] | BRACKET AS | |
| 12. | 160-8500 M | [5] | NUT (M8X1.25-THD) | |
| 13. | 2T-3019 | [1] | CLIP | |
| 14. | 4D-7794 | [2] | CLIP | |
| 15. | 5C-7261 M | [5] | NUT (M8X1.25-THD) | |
| 16. | 208-3908 | [1] | COVER | |
| 17. | 7X-0605 | [1] | WASHER-HARD (13X28X1.6-MM THK) | |
| 18. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 19. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 20. | 8C-8451 M | [4] | BOLT (M6X1X40-MM) | |
| 21. | 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 23. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 24. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 25. | 208-3909 | [1] | COVER AS | |
| 26. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 27. | 8T-4224 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 29. | 9M-8406 | [3] | CLIP (LOOP) | |
| 30. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 31. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
