207-8617 WIRING GP-CAB S/N ANT1-UP PART OF 204-4490 CANOPY AR-OPEN ROPS 966G II WHEEL LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 207-8617 WIRING GP-
1. 207-8617 WIRING GP-
2. 207-8617 WIRING GP-
3. 180-3563 WIRING GP-
4. 180-3563 WIRING GP-
5. 204-0367 WIRING GP-
6. 266-7160 WIRING GP-
7. 209-0755 WIRING GP-
8. 180-3561 WIRING GP-
9. 180-3561 WIRING GP-
0. INFORMATION

WHEEL LOADER 966G II WHEEL LOADER ANT
966G II Wheel Loader ANT00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3487 966G II ANT (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

195-6255 WIRING GP-CAB

207-8617 WIRING GP-CAB

180-3563 WIRING GP-CHASSIS

#SEBP34870290

207-8617: WIRING GP-CAB

WIRING GP-CAB

207-8617 WIRING GP-CAB
S/N ANT1-UP
PART OF 204-4490 CANOPY AR-OPEN ROPS

i01738282 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-0109	[15]	PLUG (ROCKER SWITCH)
2.	3E-5239	[3]	RELAY AS (24-VOLT)
3.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
4.	3E-6389 Y	[2]	LAMP GP-DOME (24-VOLT)
5.	3S-2093	[21]	STRAP-CABLE
6.	4V-4164	[8]	BUSHING-TERMINAL
7.	6I-1418	[8]	SPACER (8.2X12.7X28.7-MM THK)
8.	7K-1181 C	[21]	STRAP-CABLE
9.	7N-5876	[4]	LAMP (24-VOLT, 0.2-AMPERE)
10.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
11.	8T-8737 C	[49]	PLUG-SEAL
12.	8T-9655	[16]	MOUNT-ISOLATION
13.	8X-5804	[1]	STRAP AS-GROUND
14.	9F-8125	[8]	LOCKWASHER
15.	9W-1441	[2]	FUSE (15-AMPERE)
16.	9W-1442	[29]	FUSE (10-AMPERE)
17.	9W-1446	[1]	FUSE (20-AMPERE)
18.	098-8968	[8]	WASHER (5X16X1.2-MM THK)
19.	103-5526 Y	[1]	CONTROL GP-MONITOR (BACKLIGHT DIMMER)
20.	108-3320	[1]	SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING LAMP)
21.	110-6109	[3]	KNOB-CONTROL
22.	110-7887	[1]	SWITCH AS-START (KEY)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
23.	117-2311	[1]	SOCKET-AUXILIARY POWER (12-VOLT)
24.	121-8038	[1]	RECEPTACLE AS
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	5P-5624	[1]	WIRE (14-GA, BLACK)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
25.	6V-5645 C	[1]	SCREW-MACHINE (10-32X0.87-IN)
26.	131-3987 M	[4]	SCREW (M4X0.7X12-MM)
27.	139-1398	[1]	CLIP (LOOP)
28.	154-7443 Y	[1]	CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM)
29.	166-6928 Y	[1]	MODULE GP-QUAD GAUGE
30.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
31.	172-9391 Y	[1]	CONTROL GP-UNPROGRAMMED (IMPLEMENT)
32.	173-2234	[1]	PLATE AS
33.	173-2235	[1]	PLATE AS
34.	173-2236	[1]	PLATE AS
35.	177-3187	[1]	PLATE
36.	180-6752	[1]	SWITCH AS-ROCKER (FINE MODULATION)
	118-0637	[1]	SWITCH AS-ROCKER
	3E-8825	[1]	LAMP (24-VOLT)
	180-6748	[1]	ACTUATOR
37.	185-2172	[1]	HARNESS AS-OPERATOR CONTROLS
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	8T-8737	[11]	PLUG-SEAL
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
38.	185-5880	[1]	SWITCH AS-ROCKER (LIFT & TILT KICKOUT)
	193-0709	[1]	SWITCH AS
	3E-8825	[2]	LAMP (24-VOLT)
	185-5879	[1]	ACTUATOR
39.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
40.	188-4804	[1]	SWITCH AS-ROCKER (TMSN NEUTRALIZER OVERRIDE)
	123-6388	[1]	SWITCH AS
	3E-8825	[1]	LAMP (24-VOLT)
	3E-9331	[1]	ACTUATOR
41.	197-4840	[1]	HARNESS AS-LIGHTING (FRONT FLOODLIGHTS)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
42.	197-4845	[1]	HARNESS AS-WIRING (SERVICE TOOL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	8T-8737	[7]	PLUG-SEAL
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
43.	198-6570	[1]	LIGHTER GP (12-VOLT)
	198-6571	[1]	ELEMENT AS-HEATER (12-VOLT)
45.	201-7952	[1]	SWITCH AS-ROTARY (AUTOSHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	9W-0852	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
46.	202-9803	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, RH)
	1S-9593	[1]	STRAP-CABLE
	3E-5180	[1]	WEDGE-RECEPTACLE LOCK (12-PIN)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
47.	202-9804	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, LH)
	1S-9593	[1]	STRAP-CABLE
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	3E-5180	[1]	WEDGE-RECEPTACLE LOCK (12-PIN)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
48.	202-9805	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, CENTER)
	1S-9593	[1]	STRAP-CABLE
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	186-3735		PIN-CONNECTOR (16-GA TO 18-GA)
49.	206-5015	[1]	HARNESS AS-CAB (MAIN)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[4]	KIT-RECEPTACLE (6-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[3]	KIT-RECEPTACLE (12-PIN)
	197-7565	[1]	KIT-RECEPTACLE (4-PIN)(4 PIN)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
	8T-8737	[218]	PLUG-SEAL
	7G-7917	[1]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	3E-7996	[18]	PLUG-CONNECTOR (6-PIN)
	169-8672	[13]	PLUG AS-CONNECTOR
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
	110-6846	[2]	PLUG AS-CONNECTOR (40-PIN)
			(EACH INCLUDES)
	110-6844	[1]	SEAL
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	9X-7148	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	8N-1532	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	8N-1536	[1]	NUT (1-5/8-18-THD)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[7]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[5]	KIT-CONNECTING PLUG (12-PIN)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
50.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
51.	6V-1889 C	[1]	CLIP (LOOP)
52.	099-3649 M	[8]	BOLT (M8X1.25X40-MM)
53.	112-6171	[1]	SWITCH AS-ROCKER (OPERATOR MONITOR SELECTOR)
	3E-8768	[1]	SWITCH AS (24-VOLT)
	3E-8825	[1]	LAMP (24-VOLT)
	112-6170	[1]	ACTUATOR
54.	116-4502	[1]	SWITCH AS-ROCKER (24-VOLT)(IMPLEMENT LOCKOUT)
	116-4503	[1]	SWITCH AS-ROCKER (24-VOLT)
	3E-8825	[1]	LAMP (24-VOLT)
	116-4501	[1]	ACTUATOR
55.	130-5300	[5]	CLIP
56.	132-5789	[1]	CLIP (LADDER)
57.	149-7738	[1]	CLIP (LOOP)
58.	2H-3920	[2]	LOCKWASHER
59.	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
60.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
61.	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
62.	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
63.	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
64.	4B-2049	[8]	NUT (10-32-THD)
65.	4S-1962	[1]	CLIP (LOOP)
66.	5C-7261 M	[2]	NUT (M8X1.25-THD)
67.	5C-8312 M	[4]	NUT (M4X0.7-THD)
68.	6D-1641	[1]	CLIP (LOOP)
69.	6D-6146	[4]	SCREW-MACHINE (10-32X1.25-IN)
70.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(HVAC)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
71.	6V-2687	[16]	SCREW-PAN HEAD (10-24X1-IN)
72.	6V-9673 M	[3]	SCREW-MACHINE (M5X0.8X12-MM)
73.	7X-2621 M	[3]	BOLT (M10X1.5X12-MM)
74.	8M-2773	[1]	CLIP (LOOP)
75.	8T-0337 M	[4]	SCREW-MACHINE (M4X0.7X12-MM)
76.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
77.	8T-4133 M	[1]	NUT (M10X1.5-THD)
78.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
79.	8T-4137 CM	[5]	BOLT (M10X1.5X20-MM)
80.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
81.	8T-4191 M	[5]	BOLT (M10X1.5X16-MM)
82.	8T-4199 CM	[1]	BOLT (M8X1.25X12-MM)
83.	8T-4205	[7]	WASHER-HARD (7.2X14.5X2-MM THK)
84.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
85.	8T-4224 C	[2]	WASHER-HARD (8.8X16X2-MM THK)
86.	8T-4244 M	[5]	NUT (M12X1.75-THD)
87.	8T-4970 M	[3]	BOLT (M6X1X14-MM)
88.	9M-5870	[4]	GROMMET
89.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
90.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
91.	9X-2480 M	[2]	BOLT (M6X1X45-MM)
92.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
93.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(SEAT)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
94.	6V-8369 C	[2]	NUT (7/16-28-THD)
95.	8T-4195 CM	[1]	BOLT (M10X1.5X30-MM)
96.	5P-4116 C	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34870291

207-8617: WIRING GP-CAB

WIRING GP-CAB

207-8617 WIRING GP-CAB
S/N ANT1-185
PART OF 204-4490 CANOPY AR-OPEN ROPS

i01796967 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-0109	[15]	PLUG (ROCKER SWITCH)
2.	3E-5239	[3]	RELAY AS (24-VOLT)
3.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
4.	3E-6389 Y	[2]	LAMP GP-DOME (24-VOLT)
5.	3S-2093	[21]	STRAP-CABLE
6.	4V-4164	[8]	BUSHING-TERMINAL
7.	6I-1418	[8]	SPACER (8.2X12.7X28.7-MM THK)
8.	7K-1181	[21]	STRAP-CABLE
9.	7N-5876	[4]	LAMP (24-VOLT, 0.2-AMPERE)
10.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
11.	8T-8737 C	[49]	PLUG-SEAL
12.	8T-9655	[16]	MOUNT-ISOLATION
13.	8X-5804	[1]	STRAP AS-GROUND
14.	9F-8125	[8]	LOCKWASHER
15.	9W-1441	[2]	FUSE (15-AMPERE)
16.	9W-1442	[29]	FUSE (10-AMPERE)
17.	9W-1446	[1]	FUSE (20-AMPERE)
18.	098-8968	[8]	WASHER (5X16X1.2-MM THK)
19.	103-5526 Y	[1]	CONTROL GP-MONITOR (BACKLIGHT DIMMER)
20.	108-3320	[1]	SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING LAMP)
21.	110-6109	[3]	KNOB-CONTROL
22.	110-7887	[1]	SWITCH AS-START (KEY)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
23.	117-2311	[1]	SOCKET-AUXILIARY POWER (12-VOLT)
24.	121-8038	[1]	RECEPTACLE AS
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	5P-5624	[1]	WIRE (14-GA, BLACK)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
25.	6V-5645	[1]	SCREW-MACHINE (10-32X0.87-IN)
26.	131-3987 M	[4]	SCREW (M4X0.7X12-MM)
27.	139-1398	[1]	CLIP (LOOP)
28.	154-7443 Y	[1]	CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM)
29.	166-6928 Y	[1]	MODULE GP-QUAD GAUGE
30.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
31.	172-9391 Y	[1]	CONTROL GP-UNPROGRAMMED (IMPLEMENT)
32.	173-2234	[1]	PLATE AS
33.	173-2235	[1]	PLATE AS
34.	173-2236	[1]	PLATE AS
35.	177-3187	[1]	PLATE
36.	219-9538 C	[1]	SWITCH AS-ROCKER (FINE MODULATION)
37.	185-2172	[1]	HARNESS AS-OPERATOR CONTROLS
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	8T-8737	[11]	PLUG-SEAL
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
38.	219-9524 C	[1]	SWITCH AS-ROCKER (LIFT & TILT KICKOUT)
39.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
40.	219-9530 C	[1]	SWITCH AS-ROCKER (TMSN NEUTRALIZER OVERRIDE)
41.	197-4840	[1]	HARNESS AS-LIGHTING (FRONT FLOODLIGHTS)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
42.	197-4845	[1]	HARNESS AS-WIRING (SERVICE TOOL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	8T-8737	[7]	PLUG-SEAL
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
43.	198-6570	[1]	LIGHTER GP (12-VOLT)
	198-6571	[1]	ELEMENT AS-HEATER (12-VOLT)
45.	201-7952	[1]	SWITCH AS-ROTARY (AUTOSHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	9W-0852	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
46.	202-9803	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, RH)
	1S-9593	[1]	STRAP-CABLE
	3E-5180	[1]	WEDGE-RECEPTACLE LOCK (12-PIN)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
47.	202-9804	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, LH)
	1S-9593	[1]	STRAP-CABLE
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	3E-5180	[1]	WEDGE-RECEPTACLE LOCK (12-PIN)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
48.	202-9805	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, CENTER)
	1S-9593	[1]	STRAP-CABLE
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	186-3735		PIN-CONNECTOR (16-GA TO 18-GA)
49.	206-5015	[1]	HARNESS AS-CAB (MAIN)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[4]	KIT-RECEPTACLE (6-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[3]	KIT-RECEPTACLE (12-PIN)
	197-7565	[1]	KIT-RECEPTACLE (4-PIN)(4 PIN)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
	8T-8737	[218]	PLUG-SEAL
	7G-7917	[1]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	3E-7996	[18]	PLUG-CONNECTOR (6-PIN)
	169-8672	[13]	PLUG AS-CONNECTOR
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
	110-6846	[2]	PLUG AS-CONNECTOR (40-PIN)
			(EACH INCLUDES)
	110-6844	[1]	SEAL
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	9X-7148	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	8N-1532	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	8N-1536	[1]	NUT (1-5/8-18-THD)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[7]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[5]	KIT-CONNECTING PLUG (12-PIN)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
50.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
51.	6V-1889	[1]	CLIP (LOOP)
52.	099-3649 M	[8]	BOLT (M8X1.25X40-MM)
53.	220-8358 C	[1]	SWITCH AS-ROCKER (24-VOLT)(OPERATOR MONITOR SELECTOR)
54.	219-9533 C	[1]	SWITCH AS-ROCKER (24-VOLT)(IMPLEMENT LOCKOUT)
	116-4503	[1]	SWITCH AS-ROCKER (24-VOLT)
	3E-8825	[1]	LAMP (24-VOLT)
55.	130-5300	[5]	CLIP
56.	132-5789	[1]	CLIP (LADDER)
57.	149-7738	[1]	CLIP (LOOP)
58.	2H-3920	[2]	LOCKWASHER
59.	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
60.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
61.	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
62.	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
63.	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
64.	4B-2049	[8]	NUT (10-32-THD)
65.	4S-1962	[1]	CLIP (LOOP)
66.	5C-7261 M	[2]	NUT (M8X1.25-THD)
67.	5C-8312 M	[4]	NUT (M4X0.7-THD)
68.	6D-1641	[1]	CLIP (LOOP)
69.	6D-6146	[4]	SCREW-MACHINE (10-32X1.25-IN)
70.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(HVAC)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
71.	6V-2687	[16]	SCREW-PAN HEAD (10-24X1-IN)
72.	6V-9673 M	[3]	SCREW-MACHINE (M5X0.8X12-MM)
73.	7X-2621 M	[3]	BOLT (M10X1.5X12-MM)
74.	8M-2773	[1]	CLIP (LOOP)
75.	8T-0337 M	[4]	SCREW-MACHINE (M4X0.7X12-MM)
76.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
77.	8T-4133 M	[1]	NUT (M10X1.5-THD)
78.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
79.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
80.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
81.	8T-4191 M	[5]	BOLT (M10X1.5X16-MM)
82.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
83.	8T-4205	[7]	WASHER-HARD (7.2X14.5X2-MM THK)
84.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
85.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
86.	8T-4244 M	[5]	NUT (M12X1.75-THD)
87.	8T-4970 M	[3]	BOLT (M6X1X14-MM)
88.	9M-5870	[4]	GROMMET
89.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
90.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
91.	9X-2480 M	[2]	BOLT (M6X1X45-MM)
92.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
93.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(SEAT)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
94.	6V-8369	[2]	NUT (7/16-28-THD)
95.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
96.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34870292

207-8617: WIRING GP-CAB

WIRING GP-CAB

207-8617 WIRING GP-CAB
S/N ANT186-UP
PART OF 204-4490 CANOPY AR-OPEN ROPS

i01974677 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-0109	[15]	PLUG (ROCKER SWITCH)
2.	3E-5239	[2]	RELAY AS (24-VOLT)(HORN)
2A.	3E-5239	[1]	RELAY AS (24-VOLT)(REAR FLOODLIGHTS)
2B.	3E-5239	[1]	RELAY AS (24-VOLT)(FRONT CAB FLOODLIGHTS)
3.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
4.	3E-6389 Y	[2]	LAMP GP-DOME (24-VOLT)
5.	3S-2093 C	[20]	STRAP-CABLE
6.	4V-4164	[8]	BUSHING-TERMINAL
7.	6I-1418	[8]	SPACER (8.2X12.7X28.7-MM THK)
8.	7K-1181	[21]	STRAP-CABLE
9.	7N-5876	[4]	LAMP (24-VOLT, 0.2-AMPERE)
10.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
11.	8T-8737 C	[45]	PLUG-SEAL
12.	8T-9655	[16]	MOUNT-ISOLATION
13.	8X-5804	[1]	STRAP AS-GROUND
14.	9F-8125	[8]	LOCKWASHER
15.	9W-1441	[2]	FUSE (15-AMPERE)
16.	9W-1442	[29]	FUSE (10-AMPERE)
17.	9W-1446	[1]	FUSE (20-AMPERE)
18.	098-8968	[8]	WASHER (5X16X1.2-MM THK)
19.	103-5526 Y	[1]	CONTROL GP-MONITOR (BACKLIGHT DIMMER)
20.	108-3320	[1]	SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING LIGHTS)
21.	110-6109	[3]	KNOB-CONTROL (CONTROL PANEL SWITCHES)
22.	110-7887	[1]	SWITCH AS-START (KEY)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
23.	117-2311	[1]	SOCKET-AUXILIARY POWER (12-VOLT)
24.	121-8038	[1]	RECEPTACLE AS
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	5P-5624	[1]	WIRE (14-GA, BLACK)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
25.	6V-5645	[1]	SCREW-MACHINE (10-32X0.87-IN)
26.	131-3987 M	[4]	SCREW (M4X0.7X12-MM)
27.	156-6175 C	[1]	CLIP (LADDER)
28.	154-7443	[1]	CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM)
29.	166-6928 Y	[1]	MODULE GP-QUAD GAUGE
30.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
31.	172-9391 Y	[1]	CONTROL GP-UNPROGRAMMED (IMPLEMENT)
32.	173-2234	[1]	PLATE AS
33.	173-2235	[1]	PLATE AS
34.	173-2236	[1]	PLATE AS
35.	177-3187	[1]	PLATE
36.	219-9538	[1]	SWITCH AS-ROCKER (FINE MODULATION)
37.	185-2172	[1]	HARNESS AS-OPERATOR CONTROLS
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	8T-8737	[11]	PLUG-SEAL
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
38.	219-9524	[1]	SWITCH AS-ROCKER (LIFT,TILT KICKOUT)
39.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
40.	219-9530	[1]	SWITCH AS-ROCKER (TMSN NEUTRALIZER OVERRIDE)
41.	197-4840	[1]	HARNESS AS-LIGHTING (FRONT FLOODLIGHTS)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
42.	197-4845	[1]	HARNESS AS-WIRING (SERVICE TOOL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	8T-8737	[7]	PLUG-SEAL
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
43.	198-6570	[1]	LIGHTER GP (12-VOLT)
	198-6571	[1]	ELEMENT AS-HEATER (12-VOLT)
44.	9X-8256 C	[1]	WASHER (6.6X12X2-MM THK)
45.	201-7952	[1]	SWITCH AS-ROTARY (AUTOSHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	9W-0852	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
46.	202-9803	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, RH)
	1S-9593	[1]	STRAP-CABLE
	3E-5180	[1]	WEDGE-RECEPTACLE LOCK (12-PIN)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
47.	202-9804	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, LH)
	1S-9593	[1]	STRAP-CABLE
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	3E-5180	[1]	WEDGE-RECEPTACLE LOCK (12-PIN)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
48.	202-9805	[1]	CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL, CENTER)
	1S-9593	[1]	STRAP-CABLE
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	186-3735		PIN-CONNECTOR (16-GA TO 18-GA)
49.	242-9229	[1]	HARNESS AS-CAB (MAIN, ELECTROHYDRAULIC CONTROL)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8805	[6]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[4]	KIT-RECEPTACLE (12-PIN)
	197-7565	[1]	KIT-RECEPTACLE (4-PIN)
	8T-8737	[212]	PLUG-SEAL
	7G-7917	[1]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	3E-7996	[17]	PLUG-CONNECTOR (6-PIN)
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
	101-0205	[2]	PLUG AS-CONNECTOR (40-PIN)
			(EACH INCLUDES)
	110-6844	[1]	SEAL
	110-6848	[2]	PLUG AS-CONNECTOR (40-PIN)
			(EACH INCLUDES)
	110-6844	[1]	SEAL
	9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	9X-7148	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2274	[28]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[14]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[5]	KIT-CONNECTING PLUG (4-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[5]	KIT-CONNECTING PLUG (12-PIN)
50.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
51.	6V-1889	[1]	CLIP (LOOP)
52.	099-3649 M	[8]	BOLT (M8X1.25X40-MM)
53.	220-8358	[1]	SWITCH AS-ROCKER (24-VOLT)(MODE SELECT)
54.	219-9533	[1]	SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT)
55.	130-5300 C	[3]	CLIP
56.	132-5789 C	[2]	CLIP (LADDER)
57.	149-7738	[1]	CLIP (LOOP)
58.	2H-3920 C	[4]	LOCKWASHER
59.	102-8802 C	[1]	KIT-RECEPTACLE (2-PIN)
60.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
61.	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
62.	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
63.	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
64.	4B-2049	[8]	NUT (10-32-THD)
65.	4S-1962	[1]	CLIP (LOOP)
66.	5C-7261 M	[2]	NUT (M8X1.25-THD)
67.	5C-8312 M	[4]	NUT (M4X0.7-THD)
68.	6D-1641	[1]	CLIP (LOOP)
69.	6D-6146	[4]	SCREW-MACHINE (10-32X1.25-IN)
70.	6T-3643	[2]	CIRCUIT BREAKER AS (15-AMPERE)(A/C, HEATER CONTROL)
			(EACH INCLUDES)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
71.	6V-2687	[16]	SCREW-PAN HEAD (10-24X1-IN)
72.	6V-9673 M	[3]	SCREW-MACHINE (M5X0.8X12-MM)
73.	7X-2621 M	[3]	BOLT (M10X1.5X12-MM)
74.	4D-7388	[1]	CLIP (LOOP)
75.	8T-0337 M	[4]	SCREW-MACHINE (M4X0.7X12-MM)
76.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
77.	8T-4133 M	[1]	NUT (M10X1.5-THD)
78.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
79.	8T-4137 CM	[5]	BOLT (M10X1.5X20-MM)
80.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
81.	8T-4191 M	[5]	BOLT (M10X1.5X16-MM)
82.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
83.	8T-4205	[7]	WASHER-HARD (7.2X14.5X2-MM THK)
84.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
85.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
86.	8T-4244 M	[5]	NUT (M12X1.75-THD)
87.	8T-4970 CM	[5]	BOLT (M6X1X14-MM)
88.	9M-5870	[4]	GROMMET
89.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
90.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
91.	9X-2480 M	[2]	BOLT (M6X1X45-MM)
92.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
94.	6V-8369	[2]	NUT (7/16-28-THD)
95.	9X-6165 C	[1]	WASHER (6.5X22X2.5-MM THK)
96.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
97.	4P-7581 C	[1]	CLIP (LADDER)
98.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
99.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
100.	242-6099	[1]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34870293

180-3563: WIRING GP-CHASSIS

WIRING GP-CHASSIS

180-3563 WIRING GP-CHASSIS
S/N ANT1-185
PART OF 180-0576 ELECTRICAL AR

i01573711 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[18]	STRAP-CABLE
3.	4E-6859	[1]	BRACKET AS
4.	118-7226 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
5.	123-2993	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
6.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
7.	139-2397	[1]	BRACKET AS
8.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
9.	149-5400	[1]	PLATE
10.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	9G-3695	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
11.	164-7577 Y	[1]	SWITCH GP-BYPASS (POWER TRAIN OIL FILTER)
12.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	188-6185	[2]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	189-8690 Y	[1]	PANEL GP-CIRCUIT BREAKER
17.	209-4926	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK, WINDOW WASHER)
	8T-8737	[5]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
18.	104-6202	[1]	CLIP (LADDER)
19.	130-5300	[13]	CLIP
20.	5F-9757	[1]	GROMMET
21.	1S-0994	[4]	CLIP (LOOP)
22.	2M-3433	[2]	GROMMET
23.	2M-9780	[1]	SEAL-O-RING
24.	3J-1907	[2]	SEAL-O-RING
25.	4D-9517	[1]	CLIP
26.	4P-7581	[3]	CLIP (LADDER)
27.	4S-1962	[4]	CLIP (LOOP)
28.	4S-4455	[3]	CLIP
29.	5C-8312 M	[4]	NUT (M4X0.7-THD)
30.	5P-9297	[2]	CLIP (LOOP)
31.	6D-3479	[3]	CLIP (LOOP)
32.	6D-4244	[1]	CLIP (LOOP)
33.	6V-1889	[7]	CLIP (LOOP)
34.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
35.	8M-2770	[1]	CLIP (LOOP)
36.	8M-2772	[1]	CLIP (LOOP)
37.	8M-2773	[5]	CLIP (LOOP)
38.	8T-4121	[41]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4133 M	[20]	NUT (M10X1.5-THD)
40.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
41.	8T-4137 M	[19]	BOLT (M10X1.5X20-MM)
42.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
43.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
45.	8T-4244 M	[1]	NUT (M12X1.75-THD)
46.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
47.	4H-1225	[3]	WASHER (11X22X6-MM THK)
48.	3D-9872	[2]	PLUG-BUTTON
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34870294

180-3563: WIRING GP-CHASSIS

WIRING GP-CHASSIS

180-3563 WIRING GP-CHASSIS
S/N ANT186-UP
PART OF 180-0576 ELECTRICAL AR

i02057106 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2U-6654 C	[1]	SPACER (10X20X10-MM THK)
2.	3E-5169	[1]	GUARD-SWITCH
3.	3S-2093 C	[20]	STRAP-CABLE
4.	4E-6859	[1]	BRACKET AS
5.	4H-1225	[3]	WASHER (11X22X6-MM THK)
6.	122-4026	[1]	SPACER (13X25X25-MM THK)
7.	127-9323	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
9.	134-2252 CY	[1]	SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC TANK)
10.	139-2397	[1]	BRACKET AS
11.	149-5400	[1]	PLATE
12.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	9G-3695	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
13.	164-7577 Y	[1]	SWITCH GP-BYPASS (POWER TRAIN OIL FILTER)
14.	172-8660 CY	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK)
15.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
16.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
17.	188-6185	[2]	GROMMET
18.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
19.	189-8690 Y	[1]	PANEL GP-CIRCUIT BREAKER
20.	249-5492	[1]	GUARD-SWITCH
21.	259-1107	[1]	SWITCH AS-TOGGLE (TILT HOOD ACTUATOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3390		PIN-CONNECTOR
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
22.	261-7523	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK, WINDOW WASHER)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
23.	104-6202	[1]	CLIP (LADDER)
24.	130-5300	[12]	CLIP
25.	132-5789 C	[1]	CLIP (LADDER)
26.	1S-0994	[4]	CLIP (LOOP)
27.	2M-3433	[2]	GROMMET
28.	3D-9872	[2]	PLUG-BUTTON
29.	3J-1907	[3]	SEAL-O-RING
30.	4D-9517	[1]	CLIP
31.	4P-7581 C	[4]	CLIP (LADDER)
32.	4S-1962 C	[8]	CLIP (LOOP)
33.	4S-4455	[3]	CLIP
34.	5C-8312 M	[4]	NUT (M4X0.7-THD)
35.	5F-9757	[1]	GROMMET
36.	5P-9297	[2]	CLIP (LOOP)
37.	6D-3479	[3]	CLIP (LOOP)
38.	6D-4244	[1]	CLIP (LOOP)
39.	6V-1889 C	[3]	CLIP (LOOP)
40.	7N-3718 C	[2]	CLIP
41.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
42.	8M-2770	[1]	CLIP (LOOP)
43.	8M-2772	[1]	CLIP (LOOP)
44.	8M-2773	[5]	CLIP (LOOP)
45.	8T-4121	[43]	WASHER-HARD (11X21X2.5-MM THK)
46.	8T-4133 CM	[18]	NUT (M10X1.5-THD)
47.	8T-4136 CM	[5]	BOLT (M10X1.5X25-MM)
48.	8T-4137 M	[19]	BOLT (M10X1.5X20-MM)
49.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
50.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
51.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
52.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
53.	8T-4244 M	[2]	NUT (M12X1.75-THD)
54.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34870295

204-0367: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

204-0367 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N ANT1-UP
PART OF 204-0365 INSTALLATION AR-COMMUNICATION

i01579651 SEBP3487

2040367 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	218-3235	[1]	HARNESS AS-CONTROL (PRODUCT LINK)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
2.	033-8248	[3]	CLIP (LOOP)
3.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP34870296

266-7160: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

266-7160 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N ANT1-UP
PART OF 256-0336 INSTALLATION AR-COMMUNICATION

i02365032 SEBP3487

2667160 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[3]	STRAP-CABLE
2.	258-8677	[1]	HARNESS AS-CONTROL
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)

#SEBP34870297

209-0755: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

209-0755 WIRING GP-ELECTROHYDRAULIC
S/N ANT1-UP
PART OF 208-0831, 208-0832, 208-0833 VALVE & MTG GP-MAIN CONTROL

i01583306 SEBP3487

2090755 WIRING GP-ELECTROHYDRAULIC Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	209-0756	[1]	HARNESS AS-CONTROL (ELECTROHYDRAULIC)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	3S-2093	[3]	STRAP-CABLE
3.	5P-9297	[1]	CLIP (LOOP)
4.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP34870298

180-3561: WIRING GP-ENGINE

WIRING GP-ENGINE

180-3561 WIRING GP-ENGINE
S/N ANT1-143
PART OF 180-0576 ELECTRICAL AR

i01488604 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	7K-1181	[3]	STRAP-CABLE
3.	9C-5344	[3]	SPACER (10.5X20X18-MM THK)
4.	114-9224	[1]	SPACER (11.13X19.05X47-MM THK)
5.	130-9811	[1]	SENSOR GP-TEMPERATURE (ENGINE COOLANT)
5A.	130-9811	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
6.	140-2978	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
7.	208-0793	[1]	HARNESS AS-ENGINE
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	7K-1181	[1]	STRAP-CABLE
	9X-6772	[3]	STRAP-CABLE
	8N-1521	[1]	BELL AS-END
	8T-8737	[75]	PLUG-SEAL
8.	096-4840	[1]	CLIP
9.	124-3019	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
10.	126-3580	[1]	BRACKET AS
11.	130-5300	[5]	CLIP
13.	132-5789	[1]	CLIP (LADDER)
14.	194-6722 Y	[1]	SENSOR GP-PRESSURE (TURBO INLET)
15.	197-0529	[1]	PLATE AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
16.	1S-1015	[1]	CLIP
17.	3J-1907	[1]	SEAL-O-RING
18.	3K-0360	[2]	SEAL-O-RING
19.	4D-7794	[1]	CLIP
20.	4D-8123	[3]	CLIP
21.	4L-6454	[1]	BOLT (3/8-16X1-IN)
22.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
23.	5P-9085	[2]	CLIP (LOOP)
24.	6D-4246	[7]	CLIP (LOOP)
25.	6V-5219 M	[1]	BOLT (M8X1.25X40-MM)
26.	8M-2770	[1]	CLIP (LOOP)
27.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
28.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
29.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
30.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
31.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
33.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
34.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
35.	8T-9383	[1]	BOLT (1/2-13X0.75-IN)
36.	9M-8406	[1]	CLIP (LOOP)
37.	9X-8250	[2]	CLIP
38.	130-5301	[1]	CLIP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34870299

180-3561: WIRING GP-ENGINE

WIRING GP-ENGINE

180-3561 WIRING GP-ENGINE
S/N ANT144-185
PART OF 180-0576 ELECTRICAL AR

i04683329 SEBP3487

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	7K-1181 C	[5]	STRAP-CABLE
3.	9C-5344 C	[1]	SPACER (10.5X20X18-MM THK)
4.	116-4491 C	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	121-1340 C	[2]	ANGLE AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	130-9811	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION LUBE OIL)
6A.	130-9811	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
7.	216-7109 C	[1]	HARNESS AS-ENGINE
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[2]	STRAP-CABLE
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	8N-1521	[1]	BELL AS-END
	9X-6772	[3]	STRAP-CABLE
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	171-5349	[2]	STRAP-MARKER
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
8.	130-5300	[5]	CLIP
9.	130-5301	[1]	CLIP
10.	132-5789	[1]	CLIP (LADDER)
11.	156-6175 C	[1]	CLIP (LADDER)
12.	194-6722 Y	[1]	SENSOR GP-PRESSURE (TURBO INLET)
13.	197-0529	[1]	PLATE AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
14.	1S-1015	[1]	CLIP
15.	3J-1907	[1]	SEAL-O-RING
16.	3K-0360	[2]	SEAL-O-RING
17.	4D-7794	[1]	CLIP
18.	4K-8864 C	[1]	CLIP (LOOP)
19.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
20.	5P-9297 C	[2]	CLIP (LOOP)
21.	6D-4246 C	[5]	CLIP (LOOP)
22.	8M-2770	[1]	CLIP (LOOP)
23.	8T-4121 C	[9]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4136 CM	[8]	BOLT (M10X1.5X25-MM)
25.	8T-4138 CM	[1]	BOLT (M6X1X20-MM)
26.	8T-4189 CM	[3]	BOLT (M8X1.25X20-MM)
27.	8T-4196 CM	[1]	BOLT (M10X1.5X35-MM)
28.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
30.	8T-9383	[1]	BOLT (1/2-13X0.75-IN)
31.	9M-8406	[1]	CLIP (LOOP)
32.	9X-8250	[2]	CLIP
33.	9X-8256 C	[1]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines

CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines

CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21