OPERATOR STATION
SEAT GPCAB GP
SUPPORT GP
SUPPRESSION GP
SEAT GP
OPERATOR STATION
SEAT GP
#SEBP34870800
504-4297: SEAT GP-SUSPENSION
504-4297 SEAT GP-SUSPENSION
S/N ANT1-UP
24-VOLT. VINYL, AIR
PART OF 204-4492 SEAT GP-SUSPENSION
FIELD REPLACEMENT FOR @@@@@219-8095@@@@@
S/N ANT1-UP
24-VOLT. VINYL, AIR
PART OF 204-4492 SEAT GP-SUSPENSION
FIELD REPLACEMENT FOR @@@@@219-8095@@@@@
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 188-9820 Y | [1] | ARMREST GP (LH) | |
| 2. | 191-2933 Y | [1] | SUSPENSION GP-SEAT (AIR) | |
| 3. | 489-6536 Y | [1] | SEAT GP | |
| 4. | 6V-4248 M | [2] | BOLT (M10X1.5X25-MM) | |
| 5. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 173-7035 | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (INCLUDES WASHERS, BOLT, BLOCK-SLIDERS & SET-SCREWS) | ||||
| 7. | 498-4463 | [1] | KIT-LITERATURE HOLDER | |
| 4K-9429 | [6] | RIVET-POP | ||
| 5P-7957 | [1] | LANYARD | ||
| 173-2052 | [1] | RETAINER | ||
| 178-7907 | [1] | HOLDER (LITERATURE) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870801
528-9582: SEAT GP-SUSPENSION
528-9582 SEAT GP-SUSPENSION
S/N ANT1-UP
24-VOLT. CLOTH, HEATED, AIR
FIELD REPLACEMENT FOR @@@@@248-6193@@@@@
S/N ANT1-UP
24-VOLT. CLOTH, HEATED, AIR
FIELD REPLACEMENT FOR @@@@@248-6193@@@@@
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 188-9820 Y | [1] | ARMREST GP (LH) | |
| 2. | 241-5786 | [1] | HARNESS AS-HEATER (SEAT) | |
| 3. | 256-8768 Y | [1] | SUSPENSION GP-SEAT (AIR) | |
| 4. | 489-6537 Y | [1] | SEAT GP | |
| 5. | 6V-4248 M | [2] | BOLT (M10X1.5X25-MM) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 173-7035 | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (INCLUDES WASHERS, BOLT, SLIDER BLOCKS, & SET SCREWS) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870802
156-0549: STEERING COLUMN GP
156-0549 STEERING COLUMN GP
S/N ANT1-UP
PART OF 171-8885, 219-7619 CONTROL GP-STEERING
S/N ANT1-UP
PART OF 171-8885, 219-7619 CONTROL GP-STEERING
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34870803
198-8771: SUPPORT GP-HYDRAULIC CONTROL
198-8771 SUPPORT GP-HYDRAULIC CONTROL
S/N ANT1-UP
PART OF 173-2119 CAB AR, 204-4490 CANOPY AR-OPEN ROPS
S/N ANT1-UP
PART OF 173-2119 CAB AR, 204-4490 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-2027 | [1] | WASHER (11X18X2-MM THK) | |
| 2. | 4E-6523 | [1] | SUPPORT-SLIDE | |
| 3. | 4E-8722 | [2] | NUT (RETAINER) | |
| 4. | 4E-9173 | [2] | SHAFT-CONTROL | |
| 5. | 4E-9174 | [2] | BEARING | |
| 6. | 7V-0445 | [1] | SPRING | |
| 7. | 7X-3310 | [1] | KNOB-BALL | |
| 8. | 9U-0952 | [1] | PIN | |
| 9. | 9U-0953 | [1] | GUIDE | |
| 10. | 9U-0954 | [1] | STUD | |
| 11. | 9U-0955 | [1] | PIN | |
| 12. | 9U-0958 | [1] | SLIDER | |
| 13. | 9U-3925 | [4] | RING-RETAINING | |
| 14. | 9U-3926 | [2] | STOP | |
| 15. | 9U-3927 | [1] | BEARING | |
| 16. | 137-6841 B | [2] | SHIM (0.2-MM THK) | |
| 17. | 173-2217 | [1] | CUSHION AS | |
| 18. | 198-8767 | [1] | CUSHION AS | |
| 19. | 198-8768 | [1] | BRACKET AS | |
| 20. | 200-0728 | [1] | BRACKET | |
| 21. | 200-0729 | [1] | BRACKET | |
| 22. | 198-8769 | [1] | CONSOLE AS | |
| 23. | 198-8770 | [1] | COVER | |
| 24. | 174-4301 | [1] | LEVER AS | |
| 25. | 179-1235 | [1] | CUSHION AS | |
| 26. | 203-9991 | [3] | KNOB AS | |
| 27. | 099-3649 M | [4] | BOLT (M8X1.25X40-MM) | |
| 28. | 3K-4897 | [1] | PIN-SPRING | |
| 29. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 30. | 6V-9327 M | [4] | SETSCREW-SOCKET (M6X1-THD) | |
| 31. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 32. | 8T-4138 M | [9] | BOLT (M6X1X20-MM) | |
| 33. | 8T-4205 | [9] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 34. | 8T-4224 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 9X-2038 | [9] | WASHER (7X19X2-MM THK) | |
| 36. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 37. | 9X-2616 M | [2] | SCREW-SOCKET (M8X1.25X16-MM) | |
| 38. | 8Y-5746 | [1] | ASHTRAY | |
| 39. | 8Y-6333 | [1] | GASKET (ASHTRAY) | |
| 40. | 203-0328 | [1] | SPACER (16X19X9-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP34870804
199-3390: SUPPRESSION GP-CAB SOUND
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4222 | [4] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 2. | 168-9980 | [1] | PLATE | |
| 3. | 169-6430 | [2] | PLATE | |
| 4. | 200-1825 | [1] | BARRIER | |
| 5. | 203-4767 | [2] | PLATE AS | |
| 6. | 228-4428 | [1] | INSULATION | |
| 7. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 9. | 8T-4195 M | [8] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#SEBP34870805
229-8215: SUPPRESSION GP-CAB SOUND
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-4428 | [1] | INSULATION |
#SEBP34870806
172-9444: SUSPENSION GP-SEAT
172-9444 SUSPENSION GP-SEAT -AIR
S/N ANT1-176
24-VOLT
PART OF 178-7915, 207-2745 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
S/N ANT1-176
24-VOLT
PART OF 178-7915, 207-2745 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-4818 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 2. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 3. | 8Y-6917 | [1] | BOOT | |
| 4. | 102-6317 | [2] | BUMPER | |
| 5. | 123-8157 | [2] | SHAFT | |
| 6. | 123-9131 | [1] | ABSORBER AS-SHOCK | |
| 7. | 124-7126 | [1] | SCISSORS AS | |
| 8. | 124-7128 | [1] | BUSHING-RELIEF | |
| 9. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 10. | 147-4549 | [1] | FITTING-ELBOW | |
| 11. | 147-6522 | [1] | SPRING | |
| 12. | 149-2399 | [1] | FITTING | |
| 13. | 149-2400 | [1] | FITTING | |
| 14. | 149-2403 | [1] | VALVE AS | |
| 15. | 160-7765 | [1] | WASHER (16.26X22.23X1.97-MM THK) | |
| 16. | 160-7766 B | [3] | WASHER (16.26X22.23X0.51-MM THK) | |
| 17. | 160-7767 B | [8] | WASHER (3.68X12.57X0.51-MM THK) | |
| 18. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 19. | 171-4045 | [1] | HOUSING AS | |
| 20. | 1B-4430 | [4] | NUT-JAM (1/2-20-THD) | |
| 21. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 22. | 4V-7884 | [2] | BEARING | |
| 23. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 24. | 6K-0806 | [1] | STRAP-CABLE | |
| 25. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| 26. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) | |
| 27. | 8Y-6922 | [1] | HOUSING AS | |
| 28. | 9M-0164 | [1] | CLAMP-HOSE | |
| 29. | 147-6541 E | TUBE (29.4-CM) | ||
| 29A. | 147-6541 E | TUBE (0.9-CM) | ||
| 203-7700 F | [1] | BOLT (3/8-16-THD) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 149-2398 | [1] | KIT-AIR COMPRESSOR | ||
| (INCLUDES COMPRESSOR AS & SLEEVE) | ||||
| 8Y-6928 | [1] | KIT-FASTENER | ||
| (INCLUDES CLIPS-RATCHET) | ||||
| 123-9128 | [1] | KIT-ROLLER | ||
| (INCLUDES BEARINGS-FLANGED, ROLLERS, & TIE WRAP (SMALL)) | ||||
| 128-0613 | [1] | KIT-TETHER | ||
| (INCLUDES TETHER) | ||||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
#SEBP34870807
191-2933: SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT -AIR
S/N ANT1-UP
24-VOLT
PART OF 219-8095, 504-4296, 504-4297 SEAT GP-SUSPENSION
S/N ANT1-UP
24-VOLT
PART OF 219-8095, 504-4296, 504-4297 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [33] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 192-7760 | [1] | SHAFT | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 211-5358 E | CONDUIT-FLEXIBLE (64-CM) | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 192-7822 | [1] | SHAFT | |
| 23. | 237-3943 | [1] | BRACKET | |
| 24. | 237-3970 Y | [1] | AIR COMPRESSOR GP-SEAT | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.267-M) | ||
| 31A. | 5P-6010 D | TUBE (0.356-M) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 B | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34870808
191-2933: SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT -AIR
S/N ANT177-UP
24-VOLT
PART OF 219-8094, 219-8095, 504-4296, 504-4297 SEAT GP-SUSPENSION
Type 1
S/N ANT177-UP
24-VOLT
PART OF 219-8094, 219-8095, 504-4296, 504-4297 SEAT GP-SUSPENSION
Type 1
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [26] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 211-5358 E | CONDUIT-FLEXIBLE (64-CM) | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 | [1] | SHAFT (OUTER) | |
| 23. | 372-2158 C | [1] | BRACKET-MOUNTING | |
| 24. | 370-9894 C | [1] | COMPRESSOR AS | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.27-M) | ||
| 31A. | 5P-6010 D | TUBE (0.36-M) | ||
| 32. | 387-0314 C | [1] | WIRE AS (16-GA, ORANGE) | |
| 33. | 387-0317 C | [1] | WIRE AS (16-GA, BLACK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP34870809
191-2933: SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT -AIR
S/N ANT177-UP
24-VOLT
PART OF 219-8094, 219-8095, 504-4296, 504-4297 SEAT GP-SUSPENSION
Type 2
S/N ANT177-UP
24-VOLT
PART OF 219-8094, 219-8095, 504-4296, 504-4297 SEAT GP-SUSPENSION
Type 2
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [26] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 433-5754 CY | [1] | HARNESS AS-WIRING (SEAT AIR COMPRESSOR) | |
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 | [1] | SHAFT (OUTER) | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.27-M) | ||
| 31A. | 5P-6010 D | TUBE (0.36-M) | ||
| 32. | 442-8151 C | [1] | CLIP-CABLE | |
| 33. | 3S-2093 C | [4] | STRAP-CABLE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| 397-6405 C | [1] | KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT) | ||
| (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET & HARNESS ASSEMBLIES) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
