AVSPARE.COM
parts catalog

169-4188 CRANKSHAFT GP S/N 3PD472-UP PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR 966G II




BASIC ENGINE

CRANKSHAFT GP
 

#SEBP34880020
 

169-4188: CRANKSHAFT GP

169-4188 CRANKSHAFT GP
S/N 3PD472-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i01222552 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 211-0588 J [3] BEARING-MAIN  
  128-0382 AB BEARING-MAIN (0.51-MM US)  
  128-0383 AB BEARING-MAIN (0.76-MM US)  
  128-0384 AB BEARING-MAIN (0.51-MM OS)  
  128-0385 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
2. 246-3144 J [2] PLATE-THRUST  
3. 211-0587 J [4] BEARING-MAIN  
  128-0400 AB BEARING-MAIN (0.51-MM US)  
  128-0401 AB BEARING-MAIN (0.76-MM US)  
  128-0402 AB BEARING-MAIN (0.51-MM OS)  
  128-0403 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
4. 326-4278 [1] CRANKSHAFT AS  
4A. 6V-3536 [1] DOWEL  
4B. 187-8972 [1] GEAR-CRANKSHAFT (48-TEETH)  
4C. 9Y-0821 [1] SLEEVE (FRONT)  
4D. 9Y-0810 [1] SLEEVE-WEAR (REAR)  
   
    AVAILABLE REPAIR KIT(S):
  196-9521 J BEARING GP-MAIN (CRANKSHAFT)  
    (INCLUDES STANDARD MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP34880021
 

200-2057: CYLINDER BLOCK AS

200-2057 CYLINDER BLOCK AS
S/N 3PD472-UP
PART OF 204-3451 CYLINDER BLOCK AS
i01579185 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 216-5583 [5] BUSHING  
2. 216-5585 [1] BUSHING  
3. 216-5584 [1] BUSHING  
4. [1] CYLINDER BLOCK AS  
4A. 117-0166 [7] CAP-BEARING  
4B. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
4C. 175-0454 M [14] BOLT (M16X2X160-MM)  
  M   METRIC PART
 

#SEBP34880022
 

204-3451: CYLINDER BLOCK AS

204-3451 CYLINDER BLOCK AS
S/N 3PD472-UP
PART OF 180-6662, 226-4913 CYLINDER BLOCK GP
i01579692 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-2057 Y [1] CYLINDER BLOCK AS  
2. 148-2125 [6] LINER-CYLINDER BLOCK  
3. 437-1409 [6] SEAL-LINER  
4. 4F-5695 [6] PLUG-CUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP34880023
 

180-6662: CYLINDER BLOCK GP

180-6662 CYLINDER BLOCK GP
S/N 3PD472-UP
PART OF 223-1556 ENGINE AR
i01579420 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-3451 Y [1] CYLINDER BLOCK AS  
2. 7N-5683 [4] DOWEL  
6. 6V-3538 [2] DOWEL  
7. 1N-5999 [2] PLUG-O-RING  
8. 5P-7813 [2] SEAL-O-RING  
9. 9S-8002 [1] PLUG (7/16-20-THD)  
10. 6V-5048 [1] SEAL-O-RING  
11. 3B-0623 [4] PLUG-CUP  
12. 4G-4972 [6] SEAL-O-RING  
13. 8C-4403 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP34880024
 

226-4913: CYLINDER BLOCK GP

226-4913 CYLINDER BLOCK GP
S/N 3PD2343-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i01845510 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-3451 Y [1] CYLINDER BLOCK AS  
2. 7N-5683 [4] DOWEL  
3. 6V-3538 [2] DOWEL  
4. 1N-5999 [2] PLUG-O-RING  
5. 5P-7813 [2] SEAL-O-RING  
6. 3B-0623 [3] PLUG-CUP  
7. 4G-4972 [6] SEAL-O-RING  
8. 8C-4403 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP34880025
 

179-9459: CYLINDER HEAD AS

179-9459 CYLINDER HEAD AS
S/N 3PD472-UP
PART OF 179-9462 CYLINDER HEAD AS, 148-2149 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@179-9462@@@@@
i01336021 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CYLINDER HEAD  
2. 3B-0623 [8] PLUG-CUP  
3. 179-9453 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  179-9455 AB [12] SEAT-VALVE (0.508-MM OS)  
4. 138-2006 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  144-2952 AB [12] INSERT-VALVE SEAT (0.508-MM OS)  
5. 116-1102 [6] SLEEVE-INJECTOR  
6. 6V-7604 [16] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Z   NOT SERVICED SEPARATELY
 

#SEBP34880026
 

179-9462: CYLINDER HEAD AS

179-9462 CYLINDER HEAD AS
S/N 3PD472-UP
FIELD REPLACEMENT FOR @@@@@179-9459@@@@@
i01336027 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-9459 Y [1] CYLINDER HEAD AS  
2. 100-8150 [24] GUIDE-VALVE (STANDARD)  
  103-0734 ABF GUIDE-VALVE (0.127-MM OS)  
  103-0735 ABF GUIDE-VALVE (0.508-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP34880027
 

116-1085: CYLINDER HEAD GP

116-1085 CYLINDER HEAD GP
S/N 3PD472-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i01144013 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-2149 CY [1] CYLINDER HEAD GP  
2. 6V-9607 M [7] BOLT (M8X1.25X120-MM)  
3. 187-3307 C [1] GASKET AS-CYLINDER HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP34880028
 

148-2149: CYLINDER HEAD GP

148-2149 CYLINDER HEAD GP
S/N 3PD472-UP
PART OF 116-1085 CYLINDER HEAD GP, 20R-1461 KIT-ENGINE OVERHAUL
i01336001 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-9459 Y [1] CYLINDER HEAD AS  
2. 100-8150 [24] GUIDE-VALVE (STANDARD)  
  103-0734 AB GUIDE-VALVE (0.127-MM OS)  
  103-0735 AB GUIDE-VALVE (0.508-MM OS)  
3. 6I-1638 [12] BASE-INJECTOR POSITIONING  
4. 2A-4429 [48] LOCK-RETAINER  
5. 133-7029 [12] VALVE-EXHAUST  
6. 7E-9578 [12] VALVE-INLET  
7. 224-4441 [24] SPRING (VALVE)(INNER)  
8. 332-2152 [24] SPRING-VALVE (OUTER)  
9. 6I-2663 [24] ROTOCOIL AS  
    (EACH INCLUDES)
  6I-2662 [1] SHIELD  
  7C-8581 [1] ROTOCOIL AS  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP34880029
 

185-5308: DAMPER & PULLEY GP

185-5308 DAMPER & PULLEY GP
S/N 3PD472-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i01462248 SEBP3488
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8125 [1] DAMPER AS  
2. 175-7314 [1] PULLEY  
3. 213-1585 [1] SPACER (10.5-MM THK)  
4. 179-0092 [1] ADAPTER  
5. 136-4183 M [8] BOLT-12 POINT HEAD (M10X1.5X30-MM)  
6. 5P-8247 [6] WASHER-HARD (17X32X3.5-MM THK)  
7. 8T-0281 M [6] BOLT (M16X2X80-MM)  
8. 9X-2027 [8] WASHER (11X18X2-MM THK)  
  M   METRIC PART
 

Information:

Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Main Bearings - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Rear Seal - Install
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Front Seal - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Front Seal - Install
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Main Bearings - Install
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft - Install
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Gear - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Service Magazine

Caterpillar Parts SIS Catalog 966G II :

Truck sale:

64,000 USD 
Caterpillar 966GII, Construction
- Wheel Loaders
H.O. PENN MACHINERY CO., INC.
 
55,000 
75,800 
Caterpillar 966GII, Construction
- Wheel Loaders
EMPIRE MACHINERY
73,750 
Caterpillar 966GII, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.