415-8664 KIT-GASKET S/N 3PD472-UP; ANZ1-UP CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACER PART OF 415-8631 KIT-ENGINE OVERHAUL 966G II

415-8664 KIT-GASKET
S/N 3PD472-UP; ANZ1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACER
PART OF 415-8631 KIT-ENGINE OVERHAUL

i05201320 SEBP3488

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-4295	[1]	GASKET (TURBOCHARGER)
1S-7057	[1]	GASKET
7W-2398	[1]	GASKET (OIL DRAIN)
3E-8017 M	[4]	LOCKNUT (M10X1.5-THD)
295-5609	[1]	SEAL-O-RING
8L-2786	[1]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP34880911

434-7288: KIT-GASKET

KIT-GASKET

434-7288 KIT-GASKET
S/N ANZ1-UP
CLASSIC

i06852084 SEBP3488

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(THIS KIT IS SERVICED ONLY AS A COMPLETE PACKAGE)

#SEBP34880912

465-2364: KIT-GASKET

KIT-GASKET

465-2364 KIT-GASKET
S/N ANZ1-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES.

i05945868 SEBP3488

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
2S-0795	[2]	GASKET
3J-5553	[2]	GASKET
100-8525	[1]	GASKET
2N-5243	[2]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
5P-8068	[2]	SEAL-O-RING
5S-9134	[1]	SEAL-O-RING
6V-3831	[2]	SEAL-O-RING
6V-4367	[3]	SEAL-O-RING
6V-5063	[1]	SEAL-O-RING
6V-5134	[3]	SEAL-O-RING
6V-9027	[2]	SEAL-O-RING
8C-5230	[1]	SEAL-O-RING
8J-4351	[1]	SEAL-O-RING
9X-7549	[2]	SEAL-O-RING
061-7540	[2]	SEAL-O-RING
061-8561	[1]	SEAL-O-RING
117-3036	[2]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP34880913

418-4757: KIT-OIL SYSTEM GASKET

KIT-OIL SYSTEM GASKET

418-4757 KIT-OIL SYSTEM GASKET
S/N 3PD472-UP; ANZ1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS
PART OF 415-8631 KIT-ENGINE OVERHAUL

i05201257 SEBP3488

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST (ENGINE OIL)
8B-1615	[1]	GASKET
8N-6854	[1]	GASKET
133-7068	[1]	GASKET-CAMSHAFT COVER
109-5308	[1]	GASKET-OIL PAN
7C-8296	[14]	ISOLATOR
209-7309	[3]	PLUG
2N-5243	[2]	SEAL-O-RING
3D-2824	[1]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
4F-7952	[1]	SEAL-O-RING
5P-7813	[2]	SEAL-O-RING
295-5609	[1]	SEAL-O-RING
5P-8211	[1]	SEAL-O-RING
6V-1250	[1]	SEAL-O-RING
136-7227	[2]	SEAL-O-RING
6V-3831	[2]	SEAL-O-RING
8C-5230	[1]	SEAL-O-RING
6V-5048	[5]	SEAL-O-RING
6V-5134	[3]	SEAL-O-RING
6V-9746	[1]	SEAL-O-RING
8L-2786	[3]	SEAL-O-RING
061-9455	[1]	SEAL-O-RING
061-9458	[1]	SEAL-O-RING
121-0145	[1]	SEAL-O-RING
214-7566	[1]	SEAL-O-RING
214-7568	[4]	SEAL-O-RING
228-4947	[2]	SEAL-O-RING
6L-2609	[1]	SEAL-RUBBER

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

#SEBP34880914

209-0231: LINES GP-DIAGNOSTIC

LINES GP-DIAGNOSTIC

209-0231 LINES GP-DIAGNOSTIC -REMOTE PRESSURE TAPS
S/N ANZ1-UP

i01579552 SEBP3488

2090231 LINES GP-DIAGNOSTIC Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0852	[6]	CAP-DUST
2.	3S-2093	[4]	STRAP-CABLE
3.	185-6250	[6]	FITTING AS
4.	8T-4133 M	[1]	NUT (M10X1.5-THD)
5.	207-7852	[1]	HOSE AS (STEERING PUMP PRESSURE)
6.	207-7853	[1]	HOSE AS
7.	207-7854	[1]	HOSE AS (RELIEF VALVE, TRANSMISSION)
8.	209-0233	[1]	HOSE AS (TORQUE CONVERTER OUTLET PRESS)
9.	209-0234	[1]	HOSE AS (TRANSMISSION LUBRICATION OIL)
10.	209-0235	[1]	HOSE AS (TORQUE CONVERTER INLET PRESS)
11.	209-2619	[1]	BRACKET AS
12.	210-9645	[1]	COVER
13.	170-4735	[6]	RING-RETAINING
14.	3J-1907	[6]	SEAL-O-RING
15.	4J-5477	[6]	SEAL-O-RING
16.	4K-8302	[1]	CLIP (LOOP)
17.	4D-7794	[1]	CLIP
18.	6K-8179	[1]	CLIP
19.	6V-8641	[6]	CONNECTOR
20.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
22.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
23.	160-8741 M	[1]	BOLT (M10X1.5X50-MM)
24.	207-7851	[1]	PLATE
	M		METRIC PART

#SEBP34880915

165-4104: MOUNTING GP-LUBRICATION CHART

MOUNTING GP-LUBRICATION CHART

165-4104 MOUNTING GP-LUBRICATION CHART
S/N ANZ1-UP
PART OF 214-4572 CHASSIS AR

i01001349 SEBP3488

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
099-3645	[1]	CABLE-LANYARD
196-4484	[1]	SHEET
5P-7958	[2]	SLEEVE-CABLE SPLICE

#SEBP34880916

202-3192: PLATE & FILM GP

PLATE & FILM GP

202-3192 PLATE & FILM GP
S/N ANZ1-UP
PART OF 214-4572 CHASSIS AR

i01593021 SEBP3488

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
202-3189 Y	[1]	FILM GP
187-0661	[1]	FILM-INSTRUCTION (ALTERNATE EXIT)
		ON GLASS OF RIGHT HAND DOOR JUST ABOVE THE LATCH
5P-1175	[1]	FILM-IDENTIFICATION (ENGINE OIL FILL)
		ON CRANKCASE OIL FILLER CAP
1P-2807	[2]	FILM-IDENTIFICATION (LIFT EYE LOCATION)
		EACH AT FRONT LIFT EYES
8C-5346	[1]	FILM-IDENTIFICATION (HYDRAULIC OIL FILTER)
		ATTACHED TO OUTSIDE OF THE TRANSMISSION/HYDRAULIC FILTER GUARD FACING THE REAR OF THE MACHINE
8C-5346	[1]	FILM-IDENTIFICATION (HYDRAULIC OIL FILTER)
		ON HYDRAULIC OIL FILTER IF PAINTED
148-3587	[1]	FILM-INFORMATION (TRANSMISSION OIL LEVEL)
		ON FRONT SIDE OF TRANSMISSION SIGHT GAUGE
8C-8902	[1]	FILM-IDENTIFICATION (ENGINE OIL FILTER)
		ON ENGINE OIL FILTER IF PAINTED
188-8044	[1]	FILM-INFORMATION (FUEL FILTER, WATER SEP IDENT)
		CENTER ON FUEL/WATER SEPARATOR, LOCATED ON ENGINE IF PAINTED
241-6258		FILM-INSTRUCTION
		SEE MOUNTING GROUP FOR LOCATION
158-7864	[1]	FILM-IDENTIFICATION (HYDRAULIC OIL)
		FORWARD OF & ABOVE THE HYDRAULIC TANK SIGHT GAUGE ON TANK SURFACE
7X-7644	[2]	FILM-IDENTIFICATION (TIE-DOWN)
		ON EACH AT FRONT TIE DOWN EYES
124-2456	[2]	FILM-INSTRUCTION (NO STEP)
		ON TOP OF HOOD BEHIND CAB ON EACH SIDE
7X-3229	[2]	FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)
		ONE EACH AT FRONT AND REAR LIFT & TIEDOWN EYES
6V-4611	[1]	FILM-WARNING (JUMP START, READ OMM)
		ON INSIDE BATTERY BOX ON REAR WALL, 40MM FROM LEFT WALL & 70MM FROM TOP EDGE OF REAR WALL
185-2142	[1]	FILM-WARNING (HYDRAULIC PRESSURE)
		ON FLAT SURFACE IN CLOSE PROXIMITY OF FILLER NECK
188-7260	[1]	FILM-WARNING (READ OMM)
		INSIDE OF CAB ON INSIDE SURFACE OF FRONT LEFT HAND POST APPROXIMATELY 900MM ABOVE CAB FLOOR
156-3849	[1]	FILM-WARNING (RADIATOR)
		NEXT TO RADIATOR FILL CAP
190-6061	[2]	FILM-WARNING (FAN)
		ON EACH SIDE OF RADIATOR CENTERED 25MM ABOVE THE FAN ACCESS DOOR
239-6986	[1]	PLATE-SERIAL NUMBER (MACHINE)
		ON LEFT SIDE OF LOADER FRAME. FRONT EDGE OF PLATE 130-MM TO THE REAR OF CENTER LINE OF LIFT CYLINDER PIN.
		TOP OF PLATE 15-MM BELOW THE HORIZONTAL CENTER LINE OF THE LIFT CYLINDER PIN. FOR CONCEALED PIN LOCATION, SEE CHART
203-0148	[1]	PLATE-IDENTIFICATION (GREASE POINTS)
		ON OUTSIDE OF ENGINE END FRAME ON LH SIDE ABOVE GREASE FITTINGS
215-6397	[1]	PLATE-WARNING-ROPS/FOPS
		ON RH SIDE OF CAB ABOVE PLATFORM & REARWARD OF DOOR. CENTER IN PANEL. USE 4 DRIVE SCREWS TO FASTEN EACH PLATE
3N-3790 A	[1]	PLATE-SERIAL NUMBER (ENGINE)
		POSITION HORIZONTALLY ON NO. 6 ROD POCKET (65-MM FROM THE REAR FACE OF THE BLOCK & 185-MM FROM BOTTOM FACE OF BLOCK)
		ON RH SIDE OF CYLINDER BLOCK SIDE
5P-7244	[2]	PLATE-WARNING (NO CLEARANCE)
		ON SIDEFACE OF LOADER FRAME 75MM FORWARD OF REAR EDGE & UP 500MM FROM BOTTOM, ON EACH SIDE. USE TACK FASTNER
4B-4158	[4]	SCREW-DRIVE (NO 4X0.25-IN)
9X-6562	[8]	TACK
2S-2981	[1]	TAG-WARNING (STEERING FRAME LOCK)
		ATTACHED TO STEERING WHEEL
A		NOT PART OF THIS GROUP
Y		SEPARATE ILLUSTRATION

#SEBP34880917

212-2816: PLATE & FILM GP

PLATE & FILM GP

212-2816 PLATE & FILM GP -PORTUGUESE
S/N ANZ1-UP

i01893395 SEBP3488

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
202-1033	[1]	FILM-WARNING (RADIATOR)
6V-4614	[1]	FILM-WARNING (JUMP START, READ OMM)
188-8676	[1]	FILM-WARNING (READ OMM)
210-2054	[1]	FILM-WARNING (PRODUCT LINK RADIO)
	[1]	PLATE-WARNING-ROPS/FOPS
1S-3846	[2]	PLATE-WARNING (NO CLEARANCE)

#SEBP34880918

133-1640: PROTECTION GP-VANDALISM

PROTECTION GP-VANDALISM

133-1640 PROTECTION GP-VANDALISM
S/N ANZ1-UP

i00500280 SEBP3488

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7K-5636 Y	[1]	COVER GP-XMSN OIL FILLER CAP
5P-8502	[4]	PADLOCK GP
		(EACH INCLUDES)
5P-8500	[1]	KEY
8Y-6364	[1]	SLEEVE
Y		SEPARATE ILLUSTRATION

#SEBP34880919

6G-8390: PROTECTION GP-VANDALISM

PROTECTION GP-VANDALISM

6G-8390 PROTECTION GP-VANDALISM
S/N ANZ1-UP
PART OF 115-8554 COVER GP-PROTECTION

i00092802 SEBP3488

6G8390 PROTECTION GP-VANDALISM Parts scheme

For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1M-8649	[1]	RING-RETAINING
2.	5D-1901	[1]	WASHER (106.5X126.5X2.5-MM THK)
3.	5P-8502	[1]	PADLOCK GP
	5P-8500	[1]	KEY
	8Y-6364	[1]	SLEEVE
4.	1L-5072	[1]	DOWEL
5.	9M-7394	[1]	LEVER (LOCKING)
6.	116-4681	[1]	COVER-HYDRAULIC CAP