189-0351 PUMP GP-FUEL INJECTION S/N 5ED1-904 PART OF 223-1559 ENGINE AR 972G II WHEEL LOADER

FUEL SYSTEM

PUMP GP-FUEL INJECTION

0. 189-0351 PUMP GP-FU
1. 189-0351 PUMP GP-FU
2. 189-0351 PUMP GP-FU

PUMP GP-FUEL PRIMING

3. 191-0789 PUMP GP-FU
4. 191-0789 PUMP GP-FU
5. 191-0789 PUMP GP-FU
6. 191-0789 PUMP GP-FU

FILTER GP-FUEL

7. 190-8977 PUMP GP-FU

TANK GP-FUEL

8. 184-4720 TANK GP-FU

VALVE GP-CHECK

9. 156-5783 VALVE GP-C
0. INFORMATION

WHEEL LOADER 972G II WHEEL LOADER ANY
972G II Wheel Loader ANY00001-UP (MACHINE) POWERED BY 3196 Engine SEBP3489 972G II ANY (1999)

FUEL SYSTEM

PUMP GP-FUEL INJECTION

170-5252 INJECTOR GP-FUEL

203-7685 INJECTOR GP-FUEL

350-7555 INJECTOR GP-FUEL

189-0351 PUMP GP-FUEL INJECTION

#SEBP34890120

189-0351: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

189-0351 PUMP GP-FUEL INJECTION
S/N 5ED1-904
PART OF 223-1559 ENGINE AR

i01432342 SEBP3489

1890351 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-8525	[1]	SPACER (9X16X30-MM THK)
2.	7C-8851	[1]	CLAMP-INJECTOR
3.	152-3001 M	[1]	BOLT (8X1.25X7-MM)
4.	170-5252 Y	[1]	INJECTOR GP-FUEL
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890121

189-0351: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

189-0351 PUMP GP-FUEL INJECTION
S/N 5ED905-4597
PART OF 223-1559 ENGINE AR

i01776226 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	203-7685 CY	[1]	INJECTOR GP-FUEL
2.	152-3001 M	[1]	BOLT (8X1.25X7-MM)
3.	7C-8851	[1]	CLAMP-INJECTOR
4.	4P-8525	[1]	SPACER (9X16X30-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34890122

189-0351: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

189-0351 PUMP GP-FUEL INJECTION
S/N 5ED4598-UP
PART OF 223-1559 ENGINE AR

i03742924 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	350-7555 CY	[1]	INJECTOR GP-FUEL
2.	152-3001 M	[1]	BOLT (8X1.25X7-MM)
3.	7C-8851	[1]	CLAMP-INJECTOR
4.	4P-8525	[1]	SPACER (9X16X30-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34890123

191-0789: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

191-0789 PUMP GP-FUEL PRIMING
S/N 5ED1-984
ELECTRIC
PART OF 223-1559 ENGINE AR

i01462651 SEBP3489

1910789 PUMP GP-FUEL PRIMING Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9655	[6]	MOUNT-ISOLATION
2.	165-5970 Y	[1]	SWITCH GP-TOGGLE (FUEL PRIMING PUMP CONTROL)
3.	190-8977 Y	[1]	PUMP GP-FUEL PRM & WATER SEP
4.	191-1782	[1]	SPACER (8.5X12.7X38.2-MM THK)
5.	191-1783	[2]	SPACER (8.5X12.7X87.3-MM THK)
6.	199-5107	[1]	BRACKET AS
	8T-3612 M	[8]	NUT-WELD (M8X1.25-THD)
7.	200-1299 I	[1]	HOSE AS
8.	205-7388	[1]	BRACKET
9.	209-7659	[1]	PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF)
10.	209-8441	[1]	HARNESS AS-PUMP (FUEL PRIMING)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
11.	030-7964	[1]	ELBOW
12.	130-5300	[1]	CLIP
13.	6V-8624	[1]	ELBOW
	2M-9780	[1]	SEAL-O-RING (LARGE)
	6V-8398	[1]	SEAL-O-RING (SMALL)
14.	164-5619	[2]	PLUG AS
			(EACH INCLUDES)
	2M-9780	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
15.	3S-8665	[1]	CLIP (LOOP)
16.	3V-0409	[1]	SPACER (0.423X0.675X1.25-IN THK)
17.	7X-0579	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
18.	7X-2539 M	[2]	BOLT (M8X1.25X110-MM)
19.	8T-0100 M	[1]	BOLT (M8X1.25X60-MM)
20.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4178 M	[2]	BOLT (M10X1.5X90-MM)
22.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
23.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
24.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
25.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
26.	8M-2771	[1]	CLIP
27.	6V-8721	[1]	ELBOW
28.	2M-9780	[1]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890124

191-0789: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

191-0789 PUMP GP-FUEL PRIMING
S/N 5ED985-1131
ELECTRIC
PART OF 223-1559 ENGINE AR

i01810636 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9655	[6]	MOUNT-ISOLATION
2.	165-5970 Y	[1]	SWITCH GP-TOGGLE (FUEL PRIMING PUMP CONTROL)
3.	190-8977 Y	[1]	PUMP GP-FUEL PRM & WATER SEP
4.	191-1782	[1]	SPACER (8.5X12.7X38.2-MM THK)
5.	191-1783	[2]	SPACER (8.5X12.7X87.3-MM THK)
6.	225-1283	[1]	BRACKET AS
	8T-3612 M	[5]	NUT-WELD (M8X1.25-THD)
7.	200-1299 I	[1]	HOSE AS
8.	205-7388	[1]	BRACKET
9.	209-7659	[1]	PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF)
10.	209-8441	[1]	HARNESS AS-PUMP (FUEL PRIMING)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
11.	030-7964	[1]	ELBOW
12.	130-5300	[1]	CLIP
13.	6V-8624	[1]	ELBOW
	2M-9780	[1]	SEAL-O-RING (LARGE)
	6V-8398	[1]	SEAL-O-RING (SMALL)
14.	164-5619	[2]	PLUG AS
			(EACH INCLUDES)
	2M-9780	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
15.	3S-8665	[1]	CLIP (LOOP)
16.	3V-0409	[1]	SPACER (0.423X0.675X1.25-IN THK)
17.	7X-0579	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
18.	7X-2539 M	[2]	BOLT (M8X1.25X110-MM)
19.	8T-0100 M	[1]	BOLT (M8X1.25X60-MM)
20.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4178 M	[2]	BOLT (M10X1.5X90-MM)
22.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
23.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
24.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
25.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
26.	4D-7794	[1]	CLIP
27.	6V-8721	[1]	ELBOW
28.	2M-9780	[1]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890125

191-0789: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

191-0789 PUMP GP-FUEL PRIMING
S/N 5ED1132-1915
ELECTRIC
PART OF 223-1559 ENGINE AR

i01960684 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9655	[6]	MOUNT-ISOLATION
2.	165-5970 Y	[1]	SWITCH GP-TOGGLE (FUEL PRIMING PUMP CONTROL)
3.	190-8977 Y	[1]	PUMP GP-FUEL PRM & WATER SEP
4.	191-1782	[1]	SPACER (8.5X12.7X38.2-MM THK)
5.	191-1783	[2]	SPACER (8.5X12.7X87.3-MM THK)
6.	225-1283	[1]	BRACKET AS
	8T-3612 M	[5]	NUT-WELD (M8X1.25-THD)
7.	200-1299 I	[1]	HOSE AS
8.	205-7388	[1]	BRACKET
9.	209-7659	[1]	PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF)
10.	209-8441	[1]	HARNESS AS-PUMP (FUEL PRIMING)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
11.	030-7964	[1]	ELBOW
12.	130-5300	[1]	CLIP
13.	6V-8624	[1]	ELBOW
	2M-9780	[1]	SEAL-O-RING (LARGE)
	6V-8398	[1]	SEAL-O-RING (SMALL)
14.	164-5619	[2]	PLUG AS
			(EACH INCLUDES)
	2M-9780	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
15.	3S-8665	[1]	CLIP (LOOP)
16.	3V-0409	[1]	SPACER (0.423X0.675X1.25-IN THK)
17.	7X-0579	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
18.	7X-2539 M	[2]	BOLT (M8X1.25X110-MM)
19.	8T-0100 M	[1]	BOLT (M8X1.25X60-MM)
20.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4178 M	[2]	BOLT (M10X1.5X90-MM)
22.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
23.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
24.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
25.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
26.	4D-7794	[1]	CLIP
27.	6V-8721	[1]	ELBOW
28.	2M-9780	[1]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890126

191-0789: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

191-0789 PUMP GP-FUEL PRIMING
S/N 5ED1916-UP
ELECTRIC
PART OF 223-1559 ENGINE AR

i02044793 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9655 C	[8]	MOUNT-ISOLATION
2.	165-5970 Y	[1]	SWITCH GP-TOGGLE (FUEL PRIMING PUMP CONTROL)
3.	190-8977 Y	[1]	PUMP GP-FUEL PRM & WATER SEP
4.	191-1782	[1]	SPACER (8.5X12.7X38.2-MM THK)
5.	200-1299 I	[1]	HOSE AS
6.	209-7659	[1]	PLATE-INFORMATION (FUEL PRIMING PUMP ON, OFF)
7.	209-8441	[1]	HARNESS AS-PUMP (FUEL PRIMING)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
8.	225-1283	[1]	BRACKET AS
	8T-3612 M	[5]	NUT-WELD (M8X1.25-THD)
9.	232-1374 C	[1]	BRACKET
10.	232-1376 C	[2]	SPACER (8.5X12.7X139.1-MM THK)
11.	130-5300	[1]	CLIP
12.	148-8358	[1]	ELBOW AS
	6V-8624	[1]	ELBOW
	2M-9780	[1]	SEAL-O-RING (LARGE)
	6V-8398	[1]	SEAL-O-RING (SMALL)
13.	164-5619	[2]	PLUG AS
			(EACH INCLUDES)
	2M-9780	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
14.	2M-9780	[1]	SEAL-O-RING
15.	3E-8005 CM	[2]	BOLT (M8X1.25X160-MM)
16.	3S-8665	[1]	CLIP (LOOP)
17.	3V-0409	[1]	SPACER (0.423X0.675X1.25-IN THK)
18.	6V-4249 CM	[1]	BOLT (M10X1.5X50-MM)
19.	6V-5217 CM	[1]	BOLT (M8X1.25X20-MM)
20.	6V-5839 C	[3]	WASHER (11X21X2.5-MM THK)
21.	6V-8398	[1]	SEAL-O-RING
22.	6V-8721	[1]	ELBOW
23.	6V-9830	[1]	CAP (ORFS)
24.	8T-0100 CM	[1]	BOLT (M8X1.25X60-MM)
25.	8T-0644 CM	[2]	BOLT (M10X1.5X90-MM)
26.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
27.	9N-0869 C	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890127

190-8977: PUMP GP-FUEL PRM & WATER SEP

PUMP GP-FUEL PRM & WATER SEP

190-8977 PUMP GP-FUEL PRM & WATER SEP -PRIMARY FUEL FILTER
S/N 5ED1-UP
PART OF 191-0789 PUMP GP-FUEL PRIMING

i01420567 SEBP3489

1908977 PUMP GP-FUEL PRM & WATER SEP Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	174-9570 Y	[1]	FILTER GP-WATER SEP & FUEL (PRIMARY)
2.	190-8970	[1]	PUMP GP-FUEL PRIMING
	Y		SEPARATE ILLUSTRATION

#SEBP34890128

184-4720: TANK GP-FUEL

TANK GP-FUEL

184-4720 TANK GP-FUEL
S/N ANY1-UP
PART OF 214-4575 CHASSIS AR

i01573407 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-8306	[1]	SCREW-PURGE (1/2-20X1.625-IN)
2.	101-8909	[1]	CAP AS-FILLER (FUEL TANK)
3.	9P-7121	[1]	STRAINER-FUEL (FUEL TANK)
4.	187-7331	[8]	MOUNT-RUBBER
5.	322-7451	[1]	SENDER AS-FUEL LEVEL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
6.	184-4719	[1]	TANK AS-FUEL
7.	7M-8485	[1]	SEAL-O-RING
8.	7X-0607	[4]	WASHER-HARD (20X55X8-MM THK)
9.	7X-2554 M	[4]	BOLT (M16X2X70-MM)
10.	8C-3210 M	[5]	BOLT (M6X1X16-MM)
11.	9S-9334	[1]	PLUG (1-5/16-12-THD)
12.	9X-8256	[5]	WASHER (6.6X12X2-MM THK)
13.	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
14.	1U-8846 B	[2]	SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP34890129

156-5783: VALVE GP-CHECK

VALVE GP-CHECK

156-5783 VALVE GP-CHECK -FUEL
S/N 5ED1-UP
PART OF 191-0788 LINES GP-FUEL

i01226449 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	6V-6923	[1]	RING-BACKUP
2.	033-6033	[1]	SEAL-O-RING

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Tool Operating Manual

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Testing and Adjusting

Electronic Unit Injector - Adjust
3176C and 3196 Engines for Caterpillar Built Machines

Electronic Unit Injector - Test
3176C and 3196 Engines for Caterpillar Built Machines

Troubleshooting

Injector Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Injector Code - Calibrate
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0001 FMI 11 Cylinder #1 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0002 FMI 11 Cylinder #2 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0003 FMI 11 Cylinder #3 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0004 FMI 11 Cylinder #4 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0006 FMI 11 Cylinder #6 Injector fault
3176C and 3196 Engines for Caterpillar Built Machines

CID 0001 FMI 11 Cylinder #1 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0002 FMI 11 Cylinder #2 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0003 FMI 11 Cylinder #3 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0004 FMI 11 Cylinder #4 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0006 FMI 11 Cylinder #6 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Disassembly and Assembly

Electronic Unit Injector - Remove
3176C and 3196 Engines For Caterpillar Built Machines

Electronic Unit Injector - Install
3176C and 3196 Engines For Caterpillar Built Machines

Service Magazine

Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
2003/10/20

The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 972G II :

206-7336 PUMP & MTG GP-FUEL TRANSFER

191-0788 LINES GP-FUEL

180-0607 LINES GP-FUEL

189-0351 PUMP GP-FUEL INJECTION

191-0789 PUMP GP-FUEL PRIMING

190-8977 PUMP GP-FUEL PRM & WATER SEP

184-4720 TANK GP-FUEL

Truck sale:

69,000

Caterpillar 972GII, Construction
- Wheel Loaders
MILTON CAT

77,500

Caterpillar 972GII, Construction
- Wheel Loaders
BLANCHARD MACHINERY CO.

CATERPILLAR 972GII 2004
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MACALLISTER MACHINERY
United States

CATERPILLAR 972GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

$76,739 USD

CATERPILLAR 972GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia