220-1861 ALTERNATOR GP-CHARGING S/N ANY406-UP 70 AMPERE, 24 VOLT PART OF 180-3197 INSTALLATION AR-ENGINE 972G II

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING

0. 220-1861 ALTERNATOR

BATTERY GP

1. 180-3560 BATTERY &

WIRING GP

2. 9W-0742 BLOCK GP-J

ELECTRONICS GP-COMMUNICATION

3. 204-0366 CONTROL &
4. 256-5068 CONTROL &

ELECTRONICS GP-ENGINE

5. 200-5026 CONTROL &
6. 236-0963 CONTROL &

ELECTRONICS GP-IMPLEMENT

7. 184-4924 CONTROL AR
8. 190-0057 CONTROL GP
9. 190-0057 CONTROL GP
0. INFORMATION

WHEEL LOADER 972G II WHEEL LOADER ANY
972G II Wheel Loader ANY00001-UP (MACHINE) POWERED BY 3196 Engine SEBP3489 972G II ANY (1999)

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING

220-0178 MOUNTING GP-ALTERNATOR

232-7374 MOUNTING GP-ALTERNATOR

107-7977 ALTERNATOR GP-CHARGING

185-5294 ALTERNATOR GP-CHARGING

185-5877 ALTERNATOR GP-CHARGING

220-1861 ALTERNATOR GP-CHARGING

#SEBP34890140

220-1861: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

220-1861 ALTERNATOR GP-CHARGING
S/N ANY406-UP
70 AMPERE, 24 VOLT
PART OF 180-3197 INSTALLATION AR-ENGINE

i02504814 SEBP3489

2201861 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	185-5294 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT)(70-AMPERE)
2.	224-9911	[1]	BRACKET
3.	123-0790 C	[1]	PULLEY (8-GROOVE)
4.	7X-7729	[1]	WASHER (11X25X3-MM THK)
5.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
6.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
7.	8T-4244 M	[1]	NUT (M12X1.75-THD)
8.	8T-7930 M	[1]	BOLT (M12X1.75X160-MM)
9.	8T-8917	[1]	BOLT (1/2-13X1.25-IN)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34890141

180-3560: BATTERY & WIRING GP

BATTERY & WIRING GP

180-3560 BATTERY & WIRING GP
S/N ANY1-UP
PART OF 203-9831 ELECTRICAL AR

i01488590 SEBP3489

1803560 BATTERY & WIRING GP Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	221-9790	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
2.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
3.	3S-2093	[6]	STRAP-CABLE
4.	6W-6005	[1]	HOLD-DOWN-BATTERY
5.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
6.	8G-4090	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(58CM)
7.	5V-3889	[1]	CABLE AS
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(213CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
8.	111-7758	[1]	ROD
9.	115-2422	[2]	BATTERY GP (12-VOLT, MAINTENANCE FREE, WET)
10.	116-0080	[1]	CABLE AS (JUMPER)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	5P-0761 E		CABLE (00-GA, RED)(31CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
11.	162-9728	[1]	BRACKET AS
12.	188-6185	[4]	GROMMET
13.	205-7299	[18]	CLIP (LOOP)
14.	207-6060	[1]	CABLE AS
15.	6V-7744 M	[1]	LOCKNUT (M10X1.5-THD)
16.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4133 M	[5]	NUT (M10X1.5-THD)
18.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
19.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
20.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
21.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
22.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
24.	8T-4244 M	[2]	NUT (M12X1.75-THD)
25.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890142

9W-0742: BLOCK GP-JUNCTION

BLOCK GP-JUNCTION

9W-0742 BLOCK GP-JUNCTION -BATTERY
S/N ANY1-UP
PART OF 189-5519 RECEPTACLE GP-AUXILIARY START, 184-7259 WIRING GP-SECONDARY STEERING

i00089814 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	435-2848	[1]	COVER-TERMINAL
2.	8C-6358	[1]	BLOCK AS-JUNCTION (BATTERY)
	7F-0560	[6]	WASHER (0.516X0.938X0.101-IN THK)
	8T-3518	[6]	NUT-FULL (1/2-13-THD)

#SEBP34890143

204-0366: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

204-0366 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK
S/N ANY1-UP
PART OF 204-0365 INSTALLATION AR-COMMUNICATION

i01579649 SEBP3489

2040366 CONTROL & MTG GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-5607	[8]	MOUNT-ISOLATION
2.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
3.	9X-6165	[4]	WASHER (6.5X22X2.5-MM THK)
4.	242-7205 Y	[1]	CONTROL GP-COMMUNICATION (PRODUCT LINK 201)
5.	170-9198	[2]	PLATE
6.	207-6797	[1]	ANTENNA AS (FLEXIBLE)
7.	201-4082	[1]	BRACKET AS
8.	5P-9297	[2]	CLIP (LOOP)
9.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
10.	9X-2480 M	[4]	BOLT (M6X1X45-MM)
11.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
12.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890144

256-5068: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

256-5068 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 321SR
S/N ANY1-UP
PART OF 256-0336 INSTALLATION AR-COMMUNICATION

i02206655 SEBP3489

2565068 CONTROL & MTG GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	7K-1181	[9]	STRAP-CABLE
3.	8C-5607	[8]	MOUNT-ISOLATION
4.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
5.	229-2704	[4]	SEAL
6.	239-9954 Y	[1]	CONTROL GP-UNPROGRAMMED (PRODUCT LINK 300)
7.	255-4369	[1]	GROMMET
8.	263-8948	[1]	ANTENNA AS (600-CM)
9.	263-9088	[1]	RADIO GP-COMMUNICATION (PRODUCT LINK 121SR)
10.	264-4872	[1]	BRACKET AS
11.	264-7671	[1]	BRACKET
12.	276-0031	[1]	HARNESS AS-CONTROL (PRODUCT LINK)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-6772	[2]	STRAP-CABLE
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
13.	122-8705 M	[1]	U-BOLT (M10X1.5-MM THD)
14.	156-6175	[2]	CLIP (LADDER)
15.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
16.	8C-8451 M	[3]	BOLT (M6X1X40-MM)
17.	8T-2947 M	[1]	BOLT (M6X1X45-MM)
18.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4133 M	[2]	NUT (M10X1.5-THD)
20.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
21.	9X-2046 M	[2]	SCREW-TRUSS HEAD (M6X1X35-MM)
22.	9X-6165	[8]	WASHER (6.5X22X2.5-MM THK)
23.	9X-8256	[6]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890145

200-5026: CONTROL & MTG GP-ENGINE ELEK

CONTROL & MTG GP-ENGINE ELEK

200-5026 CONTROL & MTG GP-ENGINE ELEK
S/N 5ED1-1631
FUEL COOLED
PART OF 223-1559 ENGINE AR

i01462156 SEBP3489

2005026 CONTROL & MTG GP-ENGINE ELEK Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4971	[1]	SPACER (0.406X1X1-IN THK)
2.	8S-4950	[1]	CAP (FLARED 37-DEG)
3.	8T-9655	[8]	MOUNT-ISOLATION
4.	101-3128	[2]	SPACER-SPECIAL
5.	133-3489	[1]	PLATE AS
6.	169-3111	[2]	SPACER
7.	210-0849 Y	[1]	CONTROL GP-ENGINE ELECTRONIC
8.	5P-8347 M	[1]	BOLT (M8X1.25X70-MM)
9.	6V-3821 M	[1]	BOLT (M8X1.25X110-MM)
10.	6V-5223 M	[2]	BOLT (M8X1.25X100-MM)
11.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
12.	9N-0869	[6]	WASHER-HARD (8.8X25.5X2-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34890146

236-0963: CONTROL & MTG GP-ENGINE ELEK

CONTROL & MTG GP-ENGINE ELEK

236-0963 CONTROL & MTG GP-ENGINE ELEK
S/N 5ED1632-UP
PART OF 223-1559 ENGINE AR

i01983093 SEBP3489

2360963 CONTROL & MTG GP-ENGINE ELEK Parts scheme

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9655	[8]	MOUNT-ISOLATION
2.	101-3128	[4]	SPACER-SPECIAL
3.	143-9392 M	[2]	STUD (M8X1.25-THD)
4.	209-9588 Y	[1]	CONTROL GP-ENGINE ELECTRONIC
5.	5P-8347 M	[2]	BOLT (M8X1.25X70-MM)
6.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
7.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34890147

184-4924: CONTROL AR-AUTODIG

CONTROL AR-AUTODIG

184-4924 CONTROL AR-AUTODIG
S/N ANY1-UP
PART OF 257-2194, 267-2097 MACHINE AR
FOR USE WITH MONITOR AR-PAYLOAD

i01578715 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
190-0057 Y	[1]	CONTROL GP-AUTODIG (CAB)
137-0269 Y	[1]	MOUNTING GP-PRESSURE SENSOR (LIFT CYLINDER)
214-0113	[1]	CONFIGURATION-PREMIUM
Y		SEPARATE ILLUSTRATION

#SEBP34890148

190-0057: CONTROL GP-AUTODIG

CONTROL GP-AUTODIG

190-0057 CONTROL GP-AUTODIG
S/N ANY1-UP
PART OF 184-4924 CONTROL AR-AUTODIG
Type 1

i01462311 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4E-2229	[1]	DAMPER AS-ALARM
2.	106-0107	[1]	SWITCH GP-ROTARY (AUTODIG MATERIAL SELECTOR)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	7Y-5458 M	[1]	NUT (M12X1-THD)
	7Y-5464	[1]	WASHER (12.2X15.4X0.5-MM THK)
	8T-8737	[1]	PLUG-SEAL
	106-0210	[1]	SEAL
3.	110-6109	[1]	KNOB-CONTROL (AUTODIG SELECTOR SWITCH)
4.	123-9694	[1]	HORN (AUDIBLE ALARM/AUTODIG CYCLE)
5.	175-2209	[1]	SWITCH AS-PUSH BUTTON (AUTODIG TRIGGER)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6F-0253	[1]	LOCKWASHER
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	172-3511	[1]	NUT (5/8-24-THD)
6.	180-6753	[1]	SWITCH AS-ROCKER (AUTODIG MODE SELECTOR)
	193-0708	[1]	SWITCH AS (AUTODIG MODE SELECTOR)
	3E-8825	[1]	LAMP (24-VOLT)
	180-6749	[1]	ACTUATOR
7.	184-0880	[1]	SWITCH AS-ROCKER (AUTODIG KICKOUT SET)
	118-0637	[1]	SWITCH AS-ROCKER (AUTODIG KICKOUT SET)
	3E-8825	[1]	LAMP (24-VOLT)
	184-0879	[1]	ACTUATOR
8.	7Y-5464	[1]	WASHER (12.2X15.4X0.5-MM THK)
9.	200-8064 B	[1]	FILM-CONTROL (AUTODIG)
10.	201-1531	[1]	FILM-IDENTIFICATION (AUTODIG)
			***STANDARD REMOVAL***
	3E-0109 J	[2]	PLUG (ROCKER SWITCH)
	8R-3695 L	[1]	GROMMET
	173-2173 N	[1]	FILM-IDENTIFICATION (UPPER PANEL, CCS)
	B		USE AS REQUIRED
	J		PART OF STANDARD WIRING GP-CAB
	L		PART OF STANDARD CONTROL GP-ELECTROHYDRAULIC
	M		METRIC PART
	N		PART OF STANDARD PANEL GP-INSTRUMENT

#SEBP34890149

190-0057: CONTROL GP-AUTODIG

CONTROL GP-AUTODIG

190-0057 CONTROL GP-AUTODIG
S/N ANY1-UP
PART OF 184-4924 CONTROL AR-AUTODIG
Type 2

i01792921 SEBP3489

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4E-2229	[1]	DAMPER AS-ALARM
2.	106-0107	[1]	SWITCH GP-ROTARY (AUTODIG MATERIAL SELECTOR)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	7Y-5458 M	[1]	NUT (M12X1-THD)
	7Y-5464	[1]	WASHER (12.2X15.4X0.5-MM THK)
	8T-8737	[1]	PLUG-SEAL
	106-0210	[1]	SEAL
3.	110-6109	[1]	KNOB-CONTROL (AUTODIG SELECTOR SWITCH)
4.	123-9694	[1]	HORN (AUDIBLE ALARM/AUTODIG CYCLE)
5.	175-2209	[1]	SWITCH AS-PUSH BUTTON (AUTODIG TRIGGER)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6F-0253	[1]	LOCKWASHER
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	172-3511	[1]	NUT (5/8-24-THD)
6.	219-9539 C	[1]	SWITCH AS-ROCKER (AUTO LOADING MODE SELECT)
7.	219-9540 C	[1]	SWITCH AS-ROCKER (AUTO LOADING KICKOUT SET)
8.	2H-3920	[1]	LOCKWASHER
9.	200-8064 B	[1]	FILM-CONTROL (AUTODIG)
10.	201-1531	[1]	FILM-IDENTIFICATION (AUTODIG)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING

Testing and Adjusting

Belt Tension Chart
3176C and 3196 Engines for Caterpillar Built Machines

Charging System - Test
3176C and 3196 Engines for Caterpillar Built Machines

Troubleshooting

Alternator - Noisy Operation
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Alternator - Charging Problem
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Disassembly and Assembly

Alternator - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines

Caterpillar Parts SIS Catalog 972G II :

220-1861 ALTERNATOR GP-CHARGING

185-5877 ALTERNATOR GP-CHARGING

185-5294 ALTERNATOR GP-CHARGING

107-7977 ALTERNATOR GP-CHARGING

3E-6328 ALARM GP

132-1829 ALARM GP

281-2725 VALVE GP-CHECK

238-0296 VALVE GP-CHECK

180-3560 BATTERY & WIRING GP

9W-0742 BLOCK GP-JUNCTION

204-0366 CONTROL & MTG GP-COMMUNICATION

256-5068 CONTROL & MTG GP-COMMUNICATION

200-5026 CONTROL & MTG GP-ENGINE ELEK

236-0963 CONTROL & MTG GP-ENGINE ELEK

184-4924 CONTROL AR-AUTODIG

190-0057 CONTROL GP-AUTODIG

Truck sale:

69,000

Caterpillar 972GII, Construction
- Wheel Loaders
MILTON CAT

77,500

Caterpillar 972GII, Construction
- Wheel Loaders
BLANCHARD MACHINERY CO.

CATERPILLAR 972GII 2004
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MACALLISTER MACHINERY
United States

CATERPILLAR 972GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

$76,739 USD

CATERPILLAR 972GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia