MACHINE ARRANGEMENT
MACHINE ARENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
BELT TIGHTENER GPMACHINE ARRANGEMENT
MACHINE AR#SEBP34900001
214-4574: CHASSIS AR
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 185-3650 Y | [1] | CONTROL GP-BUCKET | ||
| 119-4402 Y | [1] | CONTROL GP-SERVICE BRAKE | ||
| S/N AWP1-175 | ||||
| 230-3117 Y | [1] | CONTROL GP-SERVICE BRAKE | ||
| S/N AWP176-UP | ||||
| 216-6415 Y | [1] | COUNTERWEIGHT GP | ||
| 119-4398 Y | [1] | CYLINDER & MTG GP-STEERING | ||
| 165-4586 Y | [1] | DOOR GP-BATTERY | ||
| 119-4387 Y | [1] | FENDER GP | ||
| 246-0676 Y | [1] | FRAME AS-LOADER | ||
| 216-7408 Y | [1] | FRAME AS-REAR | ||
| 176-2572 Y | [1] | GUARD GP-FRONT | ||
| 119-4401 Y | [1] | HITCH GP-ARTICULATING | ||
| 188-9462 Y | [1] | HOOD & GUARD GP | ||
| 119-4386 Y | [1] | LADDER GP | ||
| 180-0600 Y | [1] | LINES GP-AIR | ||
| 180-0607 Y | [1] | LINES GP-FUEL | ||
| 197-3861 Y | [1] | LINES GP-GREASE | ||
| 180-0603 Y | [1] | LINES GP-CAB HEATER | ||
| 180-0608 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 143-6258 Y | [1] | LINES GP-STEERING | ||
| S/N AWP1-295 | ||||
| 240-1723 Y | [1] | LINES GP-STEERING | ||
| S/N AWP296-UP | ||||
| 180-0609 Y | [1] | LINES GP-TORQUE CONV COOLER | ||
| 195-7314 Y | [1] | LINES GP-WATER | ||
| 112-6973 Y | [1] | LINK GP-STEERING FRAME LOCK | ||
| 6V-1970 Y | [1] | LITERATURE GP (STANDARD CAB) | ||
| 165-4104 Y | [1] | MOUNTING GP-LUBRICATION CHART | ||
| 202-3193 Y | [1] | PLATE & FILM GP | ||
| 189-6666 Y | [1] | RADIATOR & FAN GP | ||
| 191-5412 Y | [1] | SHIELD GP-ENGINE COMPARTMENT | ||
| 188-3948 Y | [1] | SUPPORT GP-AIR INLET | ||
| 184-4720 Y | [1] | TANK GP-FUEL | ||
| 126-7695 Y | [1] | WASHER GP-WINDOW | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34900002
214-4569: GENERAL AR
214-4569 GENERAL AR
S/N AWP1-UP
S/N AWP1-UP
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34900003
240-1628: MACHINE AR
240-1628 MACHINE AR -VALUE PACKAGE
S/N AWP1-UP
S/N AWP1-UP
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34900004
221-0311: WASTE HANDLING AR
221-0311 WASTE HANDLING AR
S/N AWP1-UP
FOR USE WITH @@@@@241-3373@@@@@, @@@@@241-3374@@@@@, @@@@@241-3375@@@@@, @@@@@241-3376@@@@@
CANNOT BE USED WITH @@@@@232-5205@@@@@, @@@@@232-5204@@@@@, @@@@@231-6093@@@@@, @@@@@231-6090@@@@@
S/N AWP1-UP
FOR USE WITH @@@@@241-3373@@@@@, @@@@@241-3374@@@@@, @@@@@241-3375@@@@@, @@@@@241-3376@@@@@
CANNOT BE USED WITH @@@@@232-5205@@@@@, @@@@@232-5204@@@@@, @@@@@231-6093@@@@@, @@@@@231-6090@@@@@
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 221-1649 Y | [1] | ACTUATOR GP-POWER (GUARD) | ||
| 201-6779 Y | [1] | FENDER GP-FRONT | ||
| 189-8177 Y | [1] | FRAME AS-LOADER | ||
| 189-8187 Y | [1] | FRAME AS-REAR | ||
| 221-7002 Y | [1] | GRILL GP-RADIATOR | ||
| 231-6046 Y | [1] | GUARD GP-AXLE SEAL | ||
| 070-0229 Y | [1] | GUARD GP-HYDRAULIC TANK | ||
| 070-0220 Y | [1] | GUARD GP-LIGHTING | ||
| S/N AWP1-295 | ||||
| 202-0318 Y | [1] | GUARD GP-LIGHTING | ||
| S/N AWP296-UP | ||||
| 070-0219 Y | [1] | GUARD GP-LOADER FRAME | ||
| 070-0221 Y | [1] | GUARD GP-POWER TRAIN | ||
| 070-0226 Y | [1] | LINES GP-HYDRAULIC | ||
| 070-0227 Y | [1] | PLATFORM GP-OPERATOR (LH) | ||
| 240-5961 Y | [1] | WIRING GP-LIGHTING (WASTE HANDLER FLOOD) | ||
| S/N AWP296-UP | ||||
| 199-2090 | [1] | COVER AS | ||
| 211-9291 | [2] | FILM (WASTE HANDLER) | ||
| 070-0384 | [1] | SHROUD | ||
| 070-0385 | [1] | SHROUD | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34900005
265-8911: WASTE HANDLING AR
265-8911 WASTE HANDLING AR
S/N AWP1-UP
S/N AWP1-UP
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 221-1649 Y | [1] | ACTUATOR GP-POWER (GUARD) | ||
| 201-6779 Y | [1] | FENDER GP-FRONT | ||
| 189-8177 Y | [1] | FRAME AS-LOADER | ||
| 189-8187 Y | [1] | FRAME AS-REAR | ||
| 221-7002 Y | [1] | GRILL GP-RADIATOR | ||
| 231-6046 Y | [1] | GUARD GP-AXLE SEAL | ||
| 070-0229 Y | [1] | GUARD GP-HYDRAULIC TANK | ||
| 202-0318 Y | [1] | GUARD GP-LIGHTING | ||
| 070-0219 Y | [1] | GUARD GP-LOADER FRAME | ||
| 070-0221 Y | [1] | GUARD GP-POWER TRAIN | ||
| 070-0226 Y | [1] | LINES GP-HYDRAULIC | ||
| 070-0227 Y | [1] | PLATFORM GP-OPERATOR (LH) | ||
| 240-5961 Y | [1] | WIRING GP-LIGHTING (WASTE HANDLER FLOOD) | ||
| 199-2090 | [1] | COVER AS | ||
| 211-9290 | [2] | FILM (SCRAP HANDLER) | ||
| 070-0384 | [1] | SHROUD | ||
| 070-0385 | [1] | SHROUD | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34900006
267-8590: WASTE HANDLING AR
267-8590 WASTE HANDLING AR
S/N AWP1-UP
S/N AWP1-UP
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 221-1649 Y | [1] | ACTUATOR GP-POWER (GUARD) | ||
| 221-0315 Y | [1] | CONTROL AR-FAN (AUTOMATIC REVERSING) | ||
| 201-6779 Y | [1] | FENDER GP-FRONT | ||
| 189-8177 Y | [1] | FRAME AS-LOADER | ||
| 189-8187 Y | [1] | FRAME AS-REAR | ||
| 231-6046 Y | [1] | GUARD GP-AXLE SEAL | ||
| 070-0229 Y | [1] | GUARD GP-HYDRAULIC TANK | ||
| 202-0318 Y | [1] | GUARD GP-LIGHTING | ||
| 070-0219 Y | [1] | GUARD GP-LOADER FRAME | ||
| 070-0221 Y | [1] | GUARD GP-POWER TRAIN | ||
| 070-0226 Y | [1] | LINES GP-HYDRAULIC | ||
| 070-0227 Y | [1] | PLATFORM GP-OPERATOR (LH) | ||
| 240-5961 Y | [1] | WIRING GP-LIGHTING (WASTE HANDLER FLOOD) | ||
| 199-2090 | [1] | COVER AS | ||
| 211-9290 | [2] | FILM (SCRAP HANDLER) | ||
| 070-0384 | [1] | SHROUD | ||
| 070-0385 | [1] | SHROUD | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34900007
223-1559: ENGINE AR
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 171-3062 Y | [1] | CAMSHAFT GP | ||
| 200-5026 Y | [1] | CONTROL & MTG GP-ENGINE ELEK | ||
| S/N 5ED1-1631 | ||||
| 236-0963 Y | [1] | CONTROL & MTG GP-ENGINE ELEK | ||
| S/N 5ED1632-UP | ||||
| 185-5825 Y | [1] | COOLER GP-ENGINE & XMSN OIL | ||
| 170-6487 Y | [1] | COVER GP-CYLINDER BLOCK | ||
| S/N 5ED1-1029 | ||||
| 228-2769 Y | [1] | COVER GP-CYLINDER BLOCK | ||
| S/N 5ED1030-UP | ||||
| 209-6669 Y | [1] | COVER GP-FRONT HOUSING (AIR COMPRESSOR) | ||
| 169-4190 Y | [1] | CRANKSHAFT GP | ||
| 210-8429 Y | [1] | CYLINDER BLOCK GP | ||
| S/N 5ED1-1029 | ||||
| 226-4914 Y | [1] | CYLINDER BLOCK GP | ||
| S/N 5ED1030-UP | ||||
| 116-1085 Y | [1] | CYLINDER HEAD GP | ||
| 185-5308 Y | [1] | DAMPER & PULLEY GP | ||
| 127-3288 Y | [1] | ELBOW GP-AIR INLET | ||
| 201-5174 | [1] | ELECTRONICS GP-ENGINE RATINGS | ||
| 185-5874 Y | [1] | FILLER GP-ENGINE OIL | ||
| 117-2751 Y | [1] | FILTER GP-ENGINE OIL | ||
| 185-5803 Y | [1] | FLYWHEEL GP | ||
| 185-5873 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
| S/N 5ED1-1475 | ||||
| 236-5035 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
| S/N 5ED1476-UP | ||||
| 117-2750 Y | [1] | GEAR GP-FRONT | ||
| 185-5811 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 133-7075 Y | [1] | HOUSING GP-FRONT | ||
| 117-2748 Y | [1] | LIFTING GP-ENGINE | ||
| 185-5881 Y | [1] | LINES GP-AIR | ||
| 191-0788 Y | [1] | LINES GP-FUEL | ||
| 185-2187 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
| 116-5460 Y | [1] | LINES GP-WATER (BYPASS) | ||
| 118-2808 Y | [1] | LINES GP-WATER (INLET ELBOW) | ||
| 185-5378 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 116-5405 Y | [1] | MANIFOLD GP-INLET | ||
| 138-2550 Y | [1] | MOUNTING GP-FAN DRIVE | ||
| 116-5408 Y | [1] | MOUNTING GP-VALVE MECHANISM | ||
| 183-1258 Y | [1] | PAN GP-OIL | ||
| 130-0863 Y | [6] | PISTON & ROD GP | ||
| 200-6085 Y | [1] | PLUG GP-ENGINE | ||
| 206-7336 Y | [1] | PUMP & MTG GP-FUEL TRANSFER | ||
| 117-2746 Y | [1] | PUMP GP-ENGINE OIL | ||
| 189-0351 Y | [6] | PUMP GP-FUEL INJECTION | ||
| 191-0789 Y | [1] | PUMP GP-FUEL PRIMING | ||
| 117-2674 Y | [1] | PUMP GP-WATER | ||
| 216-8361 Y | [1] | HOUSING & REGULATOR GP | ||
| S/N 5ED1-1377 | ||||
| 236-4891 Y | [1] | HOUSING & REGULATOR GP | ||
| S/N 5ED1378-UP | ||||
| 116-1091 Y | [1] | SEAL GP-CRANKSHAFT (REAR) | ||
| 183-5518 Y | [1] | SUPPORT GP-ENGINE | ||
| 191-2926 Y | [1] | TURBOCHARGER GP | ||
| 117-2749 Y | [1] | VALVE MECHANISM GP | ||
| 216-9607 Y | [1] | WIRING GP-ENGINE (ELECTRONIC CONTROL) | ||
| 117-2760 Y | [1] | WIRING GP-UNIT INJECTOR | ||
| GASKET KITS WILL BE PROVIDED WHEN AVAILABLE | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34900008
180-3197: INSTALLATION AR-ENGINE
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 188-0800 Y | [1] | AIR CLEANER GP | ||
| 185-5877 Y | [1] | ALTERNATOR GP-CHARGING | ||
| S/N AWP1-167 | ||||
| 220-1861 Y | [1] | ALTERNATOR GP-CHARGING | ||
| S/N AWP168-UP | ||||
| 188-3521 Y | [1] | DUST EJECTOR GP | ||
| Y | [1] | EXTENSION GP-EXHAUST | ||
| 188-3520 Y | [1] | FUMES DISPOSAL GP | ||
| 215-4563 Y | [1] | LINES GP-AIR | ||
| 220-0178 Y | [1] | MOUNTING GP-ALTERNATOR | ||
| S/N AWP168-248 | ||||
| 232-7374 Y | [1] | MOUNTING GP-ALTERNATOR | ||
| S/N AWP249-UP | ||||
| 185-5298 Y | [1] | MOUNTING GP-ENGINE & XMSN | ||
| 188-3518 Y | [1] | MUFFLER GP | ||
| 185-7250 Y | [1] | PULLEY GP-IDLER | ||
| S/N AWP1-167 | ||||
| 174-0620 Y | [1] | STARTING MOTOR GP-ELECTRIC | ||
| S/N AWP1-167 | ||||
| 217-5214 Y | [1] | STARTING MOTOR GP-ELECTRIC | ||
| S/N AWP168-UP | ||||
| 185-5869 Y | [1] | BELT TENSIONER GP | ||
| S/N AWP1-167 | ||||
| 220-1857 Y | [1] | BELT TENSIONER GP | ||
| S/N AWP168-248 | ||||
| 232-7375 Y | [1] | BELT TENSIONER GP | ||
| S/N AWP249-UP | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34900009
185-5869: BELT TENSIONER GP
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-7023 | [2] | PULLEY AS-IDLER | |
| (EACH INCLUDES) | ||||
| 1A. | 151-2898 | [1] | SPACER (10.4X38.1X20-MM THK) | |
| 1B. | 151-2900 M | [1] | BOLT (M10X1.5X54.25-MM) | |
| 1C. | 166-6358 | [1] | COVER-DUST | |
| 2. | 173-1498 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 2A. | 173-1500 | [1] | SPACER (10.4X45.1X1.8-MM THK) | |
| 2B. | 151-2900 M | [1] | BOLT (M10X1.5X54.25-MM) | |
| 2C. | 166-6358 | [1] | COVER-DUST | |
| 3. | 189-2218 | [1] | BELT-SERPENTINE | |
| 4. | 193-7732 | [1] | BELT TENSIONER | |
| 5. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| M | METRIC PART | |||
Information:
MACHINE ARRANGEMENT
MACHINE AR
Truck Engine News
Engine News
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Tool Operating Manual
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Service Magazine
Caterpillar Parts SIS Catalog 972G II :
Truck sale:
CATERPILLAR 972GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
$76,739 USD
CATERPILLAR 972GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia




