229-0293 PUMP GP-PISTON -AUTOMATIC REVERSING FAN S/N BAA1-UP PART OF 230-3123 CONTROL AR-FAN 950G II

HYDRAULIC SYSTEM

PUMP GP

0. 229-0293 PUMP GP-PI
1. 167-0995 PUMP GP-PI
2. 143-5438 PUMP GP-VA

MOTOR GP

3. 233-2530 ROTATING G

PUMP GP

4. 194-9453 ROTATING G

TANK GP

5. 4Z-6472 TANK & FIL
6. 129-1243 TANK GP-HY

VALVE GP-CONTROL

7. 207-8626 VALVE & MT
8. 207-8627 VALVE & MT
9. 207-8634 VALVE & MT
0. INFORMATION

WHEEL LOADER 950G II WHEEL LOADER BAA
950G II WHEEL LOADER BAA00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3492 950G II BAA (1999)

HYDRAULIC SYSTEM

PUMP GP

244-1025 PUMP GP-GEAR

191-2942 PUMP GP-PISTON

229-0293 PUMP GP-PISTON

167-0995 PUMP GP-PISTON & VANE

143-5438 PUMP GP-VANE

194-9453 ROTATING GP-PUMP

#SEBP34920520

229-0293: PUMP GP-PISTON

PUMP GP-PISTON

229-0293 PUMP GP-PISTON -AUTOMATIC REVERSING FAN
S/N BAA1-UP
PART OF 230-3123 CONTROL AR-FAN

i02158062 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	194-9453 Y	[1]	ROTATING GP-PUMP
2.	168-7861	[1]	PISTON-ACTUATOR
3.	194-9461	[1]	ROD-PISTON
4.	194-9471	[1]	SWASHPLATE
5.	233-6306	[1]	SHAFT-DRIVE
6.	198-5351	[1]	PLUG
7.	194-9472	[1]	SPRING
8.	191-7582	[1]	SHIM (2.5-MM THK)
9.	194-9473	[1]	RING
10.	155-9125	[1]	BEARING AS-ROLLER
11.	191-7583	[1]	BEARING-TAPERED
12.	194-9474	[2]	BEARING-CRADLE
13.	155-9127	[1]	SEAL
14.	231-4707	[1]	SEAL-O-RING
15.	8T-7525	[1]	SEAL-O-RING
16.	168-3504	[1]	SEAL
17.	8T-9597	[1]	RING-RETAINING
18.	8T-9515 M	[4]	BOLT-SOCKET HEAD (M10X1.5X40-MM)
19.	9S-8005	[1]	PLUG (3/4-16-THD)
20.	136-8423	[1]	PLUG-BREAK OFF
21.	204-2799	[1]	DOWEL
22.	3K-0360	[1]	SEAL-O-RING
23.	207-0697 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)
24.	155-9133	[1]	KEY
25.	9S-8002	[1]	PLUG (7/16-20-THD)
26.	3J-7354	[1]	SEAL-O-RING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34920521

167-0995: PUMP GP-PISTON & VANE

PUMP GP-PISTON & VANE

167-0995 PUMP GP-PISTON & VANE
S/N BAA1-UP
PART OF 112-6995 PUMP & MTG GP-HYDRAULIC

i01069884 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-0375 M	[2]	BOLT (M16X2X45-MM)
141-8209	[1]	COUPLING-SHAFT
167-0994 Y	[1]	PUMP GP-PISTON (STEERING)
143-5438 Y	[1]	PUMP GP-VANE (IMPLEMENT, PILOT & BRAKING)
117-8801	[1]	SEAL-O-RING
9X-8268	[2]	WASHER (17.5X30X3.5-MM THK)
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP34920522

143-5438: PUMP GP-VANE

PUMP GP-VANE

143-5438 PUMP GP-VANE -IMPLEMENT, PILOT, BRAKE
S/N BAA1-UP
PART OF 167-0995 PUMP GP-PISTON & VANE

i00810872 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2B-0947	[2]	BOLT (1/2-13X2.25-IN)
2.	146-5074 Y	[1]	CARTRIDGE GP-VANE PUMP (REAR)
3.	1B-7709	[4]	BOLT (5/8-11X8-IN)
4.	146-5076 Y	[1]	CARTRIDGE GP-VANE PUMP (FRONT)
5.	1J-6474	[1]	RING-RETAINING (EXTERNAL)
6.	3J-7719	[1]	RING-RETAINING (INNER)
7.	3L-1425	[1]	BALL BEARING
8.	3G-0785	[1]	BALL
9.	146-5077	[1]	SHAFT-PUMP
10.	6V-2318	[1]	SEAL-LIP TYPE
11.	5P-0904	[1]	SEAL-LIP TYPE
12.	146-5078	[1]	BODY-PUMP
13.	5H-3252	[1]	SEAL-O-RING
14.	146-5081	[1]	HOUSING-PUMP
15.	5E-8771	[1]	SEAL-O-RING
16.	146-5082	[1]	COVER-PUMP
17.	146-5599	[2]	STUD
18.	6V-1722	[1]	ADAPTER
19.	3D-2824	[1]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34920523

233-2530: ROTATING GP-MOTOR

ROTATING GP-MOTOR

233-2530 ROTATING GP-MOTOR -AUTOMATIC REVERSING FAN-HYDRAULIC FAN
S/N BAA1-UP
PART OF 228-8527 MOTOR GP-PISTON

i02158105 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	189-9380	[9]	PISTON AS
2.	233-4885	[1]	BARREL
3.	233-2535	[1]	PLATE (VALVE)
4.	189-9382	[1]	PLATE
5.	138-8175	[1]	BEARING-SPHERICAL
6.	168-7941	[1]	SPRING
7.	168-7940	[3]	PIN
8.	096-0015	[1]	RING-RETAINING
9.	168-7942	[1]	WASHER (28.2X36.5X2-MM THK)

#SEBP34920524

194-9453: ROTATING GP-PUMP

ROTATING GP-PUMP

194-9453 ROTATING GP-PUMP -HYDRAULIC FAN-HYDRAULIC FAN
S/N BAA1-UP
PART OF 191-2942, 229-0293 PUMP GP-PISTON

i01529266 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	155-9112	[9]	PISTON AS
2.	155-9136	[1]	BARREL
3.	266-7837	[1]	PLATE
4.	155-9116	[1]	GUIDE-BALL
5.	155-9117	[1]	SPRING
6.	194-9479	[3]	PIN
7.	194-9480	[1]	RING-RETAINING
8.	194-9481	[1]	DISC-THRUST
9.	194-9478	[1]	PLATE-PORT

#SEBP34920525

4Z-6472: TANK & FILTER GP-HYDRAULIC

TANK & FILTER GP-HYDRAULIC

4Z-6472 TANK & FILTER GP-HYDRAULIC
S/N BAA1-UP
PART OF 189-7907 GUARD GP-HYDRAULIC TANK

i01999834 SEBP3492

4Z6472 TANK & FILTER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-0361	[1]	GASKET
2.	3G-5980	[1]	PLATE
3.	4Z-6473	[1]	COVER AS
4.	9J-3047	[1]	STRAINER
5.	9R-2630	[1]	RETAINER
6.	129-1245	[1]	TANK AS
7.	129-1256	[1]	BLOCK
8.	171-7297	[1]	MANIFOLD
9.	1H-5728	[1]	SEAL-O-RING
10.	1L-5072	[1]	DOWEL
11.	1U-2827	[1]	GUIDE-VALVE
12.	2D-4202	[1]	PLATE
13.	2J-7761	[1]	RING-RETAINING
14.	1P-4579	[2]	FLANGE-HALF
15.	4J-8251	[1]	GROMMET
16.	4J-8252	[1]	GAUGE-SIGHT
17.	4T-8698	[1]	WASHER (12.2X62X3.5-MM THK)
18.	5D-1911	[1]	COVER-HYDRAULIC CAP
19.	5H-6005	[5]	SEAL-O-RING
20.	5M-2057	[1]	SEAL-O-RING
21.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	7F-8607	[4]	SEAL-O-RING
23.	8T-4956 M	[4]	BOLT (M12X1.75X35-MM)
24.	6V-4248 M	[65]	BOLT (M10X1.5X25-MM)
25.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
26.	6V-7732 M	[2]	BOLT (M10X1.5X25-MM)
27.	6V-7744 M	[66]	LOCKNUT (M10X1.5-THD)
28.	7B-3039	[1]	SPRING
29.	7F-8267	[1]	SEAL-O-RING
30.	7H-1447	[1]	CAP-FILLER (HYDRAULIC OIL)
31.	7J-2656	[1]	SCREEN AS
32.	7L-2197	[1]	SEAL-O-RING
33.	8F-9206	[4]	SEAL-O-RING
34.	8J-8782	[1]	BODY-DRAIN VALVE
35.	8J-8783	[1]	VALVE-DRAIN
36.	8T-2275	[1]	BALL
37.	8T-3298	[1]	SEAL-RECTANGULAR
38.	9H-6454	[1]	GASKET
39.	9J-7031	[1]	PLUG-DRAIN
40.	9M-7394	[1]	LEVER
41.	9T-9226	[1]	PLATE
42.	9T-9227	[1]	SCREEN AS
43.	5P-9119 D		GASKET-TAPE (ADHESIVE BACKED)(2.5-M)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP34920526

129-1243: TANK GP-HYDRAULIC

TANK GP-HYDRAULIC

129-1243 TANK GP-HYDRAULIC
S/N BAA1-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE

i00791906 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-0361	[1]	GASKET
2.	3G-5980	[1]	PLATE
3.	9J-3047	[1]	STRAINER
4.	9R-2630	[1]	RETAINER
5.	9T-9227	[1]	SCREEN AS
6.	129-1245	[1]	TANK AS
7.	171-7297	[1]	MANIFOLD
8.	129-1256	[1]	BLOCK
9.	188-9469	[1]	COVER AS
10.	1H-5728	[1]	SEAL-O-RING
11.	1L-5072	[1]	DOWEL
12.	1U-2827	[1]	GUIDE-VALVE
13.	2D-4202	[1]	PLATE
14.	2J-7761	[1]	RING-RETAINING
16.	4J-8251	[1]	GROMMET
17.	4J-8252	[1]	GAUGE-SIGHT
18.	4T-8698	[1]	WASHER (12.2X62X3.5-MM THK)
19.	5D-1911	[1]	COVER-HYDRAULIC CAP
20.	5H-6005	[5]	SEAL-O-RING
21.	5M-2057	[1]	SEAL-O-RING
23.	7F-8607	[4]	SEAL-O-RING
25.	6V-4248 M	[65]	BOLT (M10X1.5X25-MM)
26.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
27.	6V-7732 M	[2]	BOLT (M10X1.5X25-MM)
28.	6V-7744 M	[66]	LOCKNUT (M10X1.5-THD)
29.	7B-3039	[1]	SPRING
30.	7F-8267	[1]	SEAL-O-RING
31.	7H-1447	[1]	CAP-FILLER (HYDRAULIC)
32.	7J-2656	[1]	SCREEN AS
33.	7L-2197	[1]	SEAL-O-RING
34.	8F-9206	[4]	SEAL-O-RING
35.	8J-8782	[1]	BODY-DRAIN VALVE
36.	8J-8783	[1]	VALVE-DRAIN
37.	8T-2275	[1]	BALL
38.	8T-3298	[1]	SEAL-RECTANGULAR
39.	9H-6454	[1]	GASKET
40.	9J-7031	[1]	PLUG-DRAIN
41.	9M-7394	[1]	LEVER
42.	9T-9226	[1]	PLATE
43.	5P-9119 D		GASKET-TAPE (ADHESIVE BACKED)(2.5M)
44.	8T-4956 M	[4]	BOLT (M12X1.75X35-MM)
45.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
46.	1P-4579	[2]	FLANGE-HALF
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP34920527

207-8626: VALVE & MTG GP-MAIN CONTROL

VALVE & MTG GP-MAIN CONTROL

207-8626 VALVE & MTG GP-MAIN CONTROL -2-FUNCTION, WITH RIDE CONTROL
S/N BAA1-UP
PART OF 201-0319 CONTROL AR-RIDE

i01724574 SEBP3492

2078626 VALVE & MTG GP-MAIN CONTROL Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	120-4577 Y	[1]	VALVE GP-MAIN CONTROL (2-FUNCTION)
3.	126-6872	[1]	TEE
4.	129-8124	[1]	TUBE AS
5.	130-5300	[1]	CLIP
6.	130-9468	[1]	TUBE AS
7.	144-0115 Y	[1]	VALVE GP-PILOT (OIL MANIFOLD)
8.	144-6231	[1]	TUBE AS
9.	200-5978	[2]	STRAINER
10.	207-8622	[1]	TUBE
11.	207-8623	[1]	PLATE AS
12.	208-8356	[1]	TUBE AS
14.	209-2116 Y	[1]	WIRING GP-RIDE CONTROL
15.	214-3326	[1]	BRACKET AS
16.	223-5976 Y	[1]	VALVE GP-DIVERTER (RIDE CONTROL)
17.	270-7628 I	[1]	HOSE AS
18.	3J-1907	[16]	SEAL-O-RING
19.	3J-7354	[2]	SEAL-O-RING
20.	4J-0522	[2]	SEAL-O-RING
21.	5P-9297	[1]	CLIP (LOOP)
22.	6V-3265	[1]	CLIP
23.	6V-8397	[15]	SEAL-O-RING
24.	6V-8636	[4]	CONNECTOR
25.	6V-8641	[1]	CONNECTOR
26.	6V-8724	[6]	ELBOW
27.	6V-8781	[1]	TEE
28.	6V-8785	[1]	TEE
29.	6V-9001	[2]	ELBOW
30.	6V-9005	[1]	ELBOW
31.	6V-9200	[1]	ELBOW
32.	6V-9829	[1]	CAP (ORFS)
33.	6V-9843	[1]	TEE
34.	6V-9850	[1]	ELBOW
35.	6V-9872	[1]	CONNECTOR
36.	7B-1597	[3]	CLIP
37.	7M-8485	[2]	SEAL-O-RING
38.	7X-7729	[1]	WASHER (11X25X3-MM THK)
39.	8T-0075	[1]	CONNECTOR
40.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-4133 M	[3]	NUT (M10X1.5-THD)
42.	8T-4136 M	[7]	BOLT (M10X1.5X25-MM)
43.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
44.	8T-4178 M	[3]	BOLT (M10X1.5X90-MM)
45.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
46.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
47.	8T-4244 M	[1]	NUT (M12X1.75-THD)
48.	8T-5412 M	[9]	BOLT (M12X1.75X140-MM)
49.	8T-7930 M	[2]	BOLT (M12X1.75X160-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34920528

207-8627: VALVE & MTG GP-MAIN CONTROL

VALVE & MTG GP-MAIN CONTROL

207-8627 VALVE & MTG GP-MAIN CONTROL -3-FUNCTION, WITH RIDE CONTROL
S/N BAA1-UP
PART OF 201-0320 CONTROL AR-RIDE

i01724496 SEBP3492

2078627 VALVE & MTG GP-MAIN CONTROL Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	120-4581 Y	[1]	VALVE GP-MAIN CONTROL (3-FUNCTION)
3.	126-6872	[1]	TEE
4.	129-8124	[1]	TUBE AS
5.	130-5300	[1]	CLIP
6.	130-9468	[1]	TUBE AS
7.	144-0115 Y	[1]	VALVE GP-PILOT (OIL MANIFOLD)
8.	144-6231	[1]	TUBE AS
9.	200-5978	[2]	STRAINER
10.	207-8622	[1]	TUBE
11.	207-8623	[1]	PLATE AS
12.	208-8356	[1]	TUBE AS
14.	209-2116 Y	[1]	WIRING GP-RIDE CONTROL
15.	214-3326	[1]	BRACKET AS
16.	223-5976 Y	[1]	VALVE GP-DIVERTER (RIDE CONTROL)
17.	270-7628 I	[1]	HOSE AS
18.	3J-1907	[18]	SEAL-O-RING
19.	3J-7354	[2]	SEAL-O-RING
20.	4J-0522	[2]	SEAL-O-RING
21.	5P-9297	[1]	CLIP (LOOP)
22.	6V-3265	[1]	CLIP
23.	6V-8397	[15]	SEAL-O-RING
24.	6V-8636	[4]	CONNECTOR
25.	6V-8641	[1]	CONNECTOR
26.	6V-8724	[7]	ELBOW
27.	6V-8781	[1]	TEE
28.	6V-8785	[1]	TEE
29.	6V-9001	[2]	ELBOW
30.	6V-9005	[1]	ELBOW
31.	6V-9200	[1]	ELBOW
32.	6V-9829	[1]	CAP (ORFS)
33.	6V-9843	[1]	TEE
34.	6V-9850	[1]	ELBOW
35.	6V-9872	[1]	CONNECTOR
36.	7B-1597	[3]	CLIP
37.	7M-8485	[2]	SEAL-O-RING
38.	7X-7729	[1]	WASHER (11X25X3-MM THK)
39.	8T-0075	[1]	CONNECTOR
40.	8T-1905	[1]	ELBOW
41.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
42.	8T-4133 M	[3]	NUT (M10X1.5-THD)
43.	8T-4136 M	[7]	BOLT (M10X1.5X25-MM)
44.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
45.	8T-4178 M	[3]	BOLT (M10X1.5X90-MM)
46.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
47.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
48.	8T-4244 M	[1]	NUT (M12X1.75-THD)
49.	8T-5412 M	[9]	BOLT (M12X1.75X140-MM)
50.	8T-7930 M	[2]	BOLT (M12X1.75X160-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34920529

207-8634: VALVE & MTG GP-MAIN CONTROL

VALVE & MTG GP-MAIN CONTROL

207-8634 VALVE & MTG GP-MAIN CONTROL -3-FUNCTION, WITH RIDE CONTROL
S/N BAA1-UP
PART OF 202-8124 CONTROL AR-RIDE

i01855319 SEBP3492

2078634 VALVE & MTG GP-MAIN CONTROL Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-7930 M	[2]	BOLT (M12X1.75X160-MM)
2.	6V-0852	[1]	CAP-DUST
3.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
4.	120-4579 Y	[1]	VALVE GP-MAIN CONTROL (3-FUNCTION)
5.	126-6872	[1]	TEE
6.	129-8124	[1]	TUBE AS
7.	130-5300	[1]	CLIP
8.	130-9468	[1]	TUBE AS
9.	214-3326	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
10.	144-0115 Y	[1]	VALVE GP-PILOT (OIL MANIFOLD)
11.	144-6231	[1]	TUBE AS
12.	223-5976 Y	[1]	VALVE GP-DIVERTER (RIDE CONTROL)
13.	200-5978	[2]	STRAINER
14.	270-7628 I	[1]	HOSE AS
15.	207-8622	[1]	TUBE
16.	207-8623	[1]	PLATE AS
	7T-1099	[2]	LINK
	8T-3490 M	[17]	NUT-WELD (M10X1.5-THD)
	8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
	8T-3851 M	[1]	BOSS-WELD (M10X1.5X17.5-MM)
17.	208-8356	[1]	TUBE AS
19.	209-2116 Y	[1]	WIRING GP-RIDE CONTROL
20.	3J-1907	[18]	SEAL-O-RING
21.	3J-7354	[2]	SEAL-O-RING
22.	4J-0522	[2]	SEAL-O-RING
24.	5P-9297	[1]	CLIP (LOOP)
25.	6V-3265	[1]	CLIP
26.	6V-8397	[15]	SEAL-O-RING
27.	6V-9005	[1]	ELBOW
28.	6V-8636	[4]	CONNECTOR
29.	6V-8724	[7]	ELBOW
30.	6V-8781	[1]	TEE
31.	6V-8785	[1]	TEE
32.	6V-9001	[2]	ELBOW
33.	6V-9200	[1]	ELBOW
34.	6V-9829	[1]	CAP (ORFS)
36.	6V-9843	[1]	TEE
37.	6V-9850	[1]	ELBOW
38.	6V-9872	[1]	CONNECTOR
39.	7B-1597	[3]	CLIP
40.	7M-8485	[2]	SEAL-O-RING
41.	7X-7729	[1]	WASHER (11X25X3-MM THK)
42.	8T-0075	[1]	CONNECTOR
43.	8T-1905	[1]	ELBOW
44.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
45.	8T-4133 M	[3]	NUT (M10X1.5-THD)
46.	8T-4136 M	[7]	BOLT (M10X1.5X25-MM)
47.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
48.	8T-4178 M	[3]	BOLT (M10X1.5X90-MM)
49.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
50.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
51.	8T-4244 M	[1]	NUT (M12X1.75-THD)
52.	8T-5412 M	[9]	BOLT (M12X1.75X140-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

PUMP GP

Operation and Maintenance Manual

Case Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - Clean
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Flushing Contaminated Wheel Loader Hydraulic Systems{5050, 5055, 5084}
Flushing Contaminated Wheel Loader Hydraulic Systems{5050, 5055, 5084}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS

PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950G II, 962G, 962G II, IT62G AND IT62G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950G II, 962G, 962G II, IT62G AND IT62G II WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE HOSE OR TUBE ASSEMBLY ON CERTAIN 950G, 950G SERIES II, 962G, AND 962G SERIES II WHEEL LOADERS AND IT62G AND IT62G SERIES II INTEGRATED TOOLCARRIERS EQUIPPED WITH IMPLEMENT GEAR PUMP
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HOSE OR TUBE ASSEMBLY ON CERTAIN 950G, 950G SERIES II, 962G, AND 962G SERIES II WHEEL LOADERS AND IT62G AND IT62G SERIES II INTEGRATED TOOLCARRIERS EQUIPPED WITH IMPLEMENT GEAR PUMP

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

PROCEDURE TO DETERMINE WHICH SEAL IS LEAKING ON STEERING PUMPS ON 950/962 Series G/G II & 980 Series G/G II/H WHEEL LOADERS
PROCEDURE TO DETERMINE WHICH SEAL IS LEAKING ON STEERING PUMPS ON 950/962 Series G/G II & 980 Series G/G II/H WHEEL LOADERS

Specifications

Piston Pump (Hydraulic Fan)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Solenoid Valve (Demand Fan)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Vane Pump (Implement, Pilot, Brake)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Gear Pump (Implement, Pilot, Brake)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Service Letter-China

Service Letter-Asia

Systems Operation

Vane Pump
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Piston Pump (Hydraulic Fan)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Hydraulic Fan System
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Gear Pump
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Reuse And Salvage Guidelines

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Service Letter-APD

Testing and Adjusting

Pump Performance (Pilot and Braking) - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Pump Performance (Implement) - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Torque Converter Stall and Implement Pump Double Stall - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Hydraulic Fan Speed - Test and Adjust
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Bench Test Procedures

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}

Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}

Disassembly and Assembly

Vane Pump (Implement, Pilot and Braking) - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems

Vane Pump (Implement, Pilot and Braking) - Assemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems

Vane Pump (Implement, Pilot and Braking) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems

Vane Pump (Implement, Pilot and Braking) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems

Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement

Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement

Service Magazine

Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
2004/07/05

A New Two-Piece Seal Is Used in Various Metering Pumps (Steering) and in the New 257-8471 Seal Kit {4312}
2004/12/20

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Wear that is Acceptable in Specific Gear Pumps {4007, 5073, 5073, 7516}
2008/02/04