AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

211-3118 CONTROL GP-HANDLE -DIRECTION, DOWNSHIFT S/N BAA1-UP 950G II WHEEL LOADER


OPERATOR STATION
CONTROL GP-HANDLE
MONITOR GP
CONTROL GP-PILOT OPERATED HYD
CONTROL GP-STEERING

WHEEL LOADER 950G II WHEEL LOADER BAA
 950G II WHEEL LOADER BAA00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3492 950G II BAA   (1999)

OPERATOR STATION

CONTROL GP-HANDLE
CONTROL GP-HANDLE
211-3118 CONTROL GP-HANDLE
 

#SEBP34920630
 

211-3118: CONTROL GP-HANDLE

211-3118 CONTROL GP-HANDLE -DIRECTION, DOWNSHIFT
S/N BAA1-UP
i01724845 SEBP3492
2113118 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-1293 M [2] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
2. 208-6097 [1] HANDLE GP-MODULAR (DIRECTION, DOWNSHIFT SWITCHES)  
  186-3735 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 196-0109 [1] ROD  
4. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
5. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
6. 114-3940 J [1] ROD  
  J   REQUIRED ONLY WHEN USED ON 2 & 3 VALVE SINGLE AXIS LEVERS
  M   METRIC PART
 

#SEBP34920631
 

103-5526: CONTROL GP-MONITOR

103-5526 CONTROL GP-MONITOR -DIMMER
S/N BAA1-UP
PART OF 195-6256, 207-8618 WIRING GP-CAB
i00192034 SEBP3492
1035526 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9132 [2] SCREW-HEX FLANGE (6-32X0.187-IN)  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#SEBP34920632
 

246-9199: CONTROL GP-MONITOR

246-9199 CONTROL GP-MONITOR -PAYLOAD
S/N BAA1-UP
PART OF 199-9096 MONITOR GP-PAYLOAD
i02098665 SEBP3492
2469199 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CONTROL AS-ELECTRONIC  
2. 246-9198 [1] SOFTWARE GP-MONITOR (PAYLOAD CONTROL)  
3. 8C-3078 [1] SEAL-O-RING  
4. 129-9690 [1] COVER  
5. 101-1785 [1] BATTERY (LITHIUM)  
  Z   NOT SERVICED SEPARATELY
 

#SEBP34920633
 

283-1636: CONTROL GP-MONITOR

283-1636 CONTROL GP-MONITOR -PAYLOAD
S/N BAA1-UP
PART OF 241-6254 MONITOR GP-PAYLOAD
i02614772 SEBP3492
2831636 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 283-1635 [1] SOFTWARE GP-MONITOR (PAYLOAD CONTROL SYSTEM)  
2. 8C-3078 [1] SEAL-O-RING  
3. 129-9690 [1] COVER  
4. 193-5488 [1] BATTERY (LITHIUM)  
 

#SEBP34920634
 

188-9709: CONTROL GP-PILOT OPERATED HYD

188-9709 CONTROL GP-PILOT OPERATED HYD -2-FUNCTION
S/N BAA1-UP
PART OF 185-7631 CAB AR-ENCLOSED ROPS, 203-9835 CANOPY AR-OPEN ROPS
i01484848 SEBP3492
1889709 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
7. 8T-8737 [4] PLUG-SEAL  
8. 124-4401 [1] KNOB  
9. 125-6798 I [1] HOSE AS  
10. 128-7063 [4] CONNECTOR-ORIFICE (1.7-MM)  
11. 141-9191 [1] PLATE-INSTRUCTION (BUCKET CONTROL)  
12. 143-9354 Y [1] VALVE GP-SHUTOFF (HYDRAULIC LOCKOUT)  
13. 152-6480 Y [1] VALVE GP-PILOT (2-FUNCTION)  
14. 152-9068 I [1] HOSE AS  
15. 152-9070 I [1] HOSE AS  
16. 152-9071 I [2] HOSE AS  
17. 152-9072 I [1] HOSE AS  
18. 155-8751 [1] COVER  
19. 158-8863 [1] CONTROL GP-HANDLE (JOYSTICK)(LIFT)  
20. 175-2806 [1] ROD  
21. 175-2947 [1] GROMMET  
22. 194-0857 I [1] HOSE AS  
23. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
24. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
25. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
26. 3J-1907 [7] SEAL-O-RING  
27. 3K-0360 [1] SEAL-O-RING  
28. 5C-7261 M [4] NUT (M8X1.25-THD)  
29. 5P-7213 [1] WASHER-HARD (13.5X20.5X2-MM THK)  
30. 6V-8397 [12] SEAL-O-RING  
31. 6V-8398 [2] SEAL-O-RING  
32. 6V-8636 [2] CONNECTOR  
33. 6V-8724 [1] ELBOW  
34. 6V-8980 [5] ELBOW  
35. 6V-8981 [1] ELBOW  
36. 6V-9168 [5] NUT (11/16-16-THD)  
37. 6V-9169 [1] NUT (13/16-16-THD)  
38. 6V-9508 [2] PLUG (11/16-16-THD)  
39. 8T-1686 [1] ADAPTER-ELBOW  
40. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
41. 8T-4244 M [3] NUT (M12X1.75-THD)  
42. 8T-2562 D TRIM (.03M)  
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920635
 

190-5005: CONTROL GP-PILOT OPERATED HYD

190-5005 CONTROL GP-PILOT OPERATED HYD -3-FUNCTION
S/N BAA1-UP
PART OF 192-4676, 192-4678, 202-8010 HYDRAULIC AR-3 VALVE
i01781024 SEBP3492
1905005 CONTROL GP-PILOT OPERATED HYD Parts scheme 1905005 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8981 [1] ELBOW  
2. 6V-9168 [7] NUT (11/16-16-THD)  
3. 4M-2381 [1] SPRING  
4. 6V-9169 [1] NUT (13/16-16-THD)  
5. 8T-1686 [1] ADAPTER-ELBOW  
6. 6W-8349 [1] KNOB  
7. 7I-5418 I [1] HOSE AS  
8. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 8T-4244 M [4] NUT (M12X1.75-THD)  
10. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8T-2562 D TRIM (.3M)  
12. 8T-8737 [4] PLUG-SEAL  
13. 106-4436 [1] ROD  
14. 114-3938 [1] TAB  
15. 114-3949 [1] LOCK AS  
16. 124-4401 [1] KNOB  
17. 125-6798 I [1] HOSE AS  
18. 128-7063 [6] CONNECTOR-ORIFICE (1.7-MM)  
19. 141-9191 [1] PLATE-INSTRUCTION (BUCKET CONTROL)  
20. 143-9069 [2] ROD  
21. 143-9354 Y [1] VALVE GP-SHUTOFF (HYDRAULIC LOCKOUT)  
22. 152-6481 Y [1] VALVE GP-PILOT (3-FUNCTION)  
23. 152-9068 I [1] HOSE AS  
24. 152-9070 I [1] HOSE AS  
25. 152-9071 I [2] HOSE AS  
26. 152-9072 I [1] HOSE AS  
27. 152-9073 I [1] HOSE AS  
28. 156-1816 [1] COVER  
29. 158-8863 [1] CONTROL GP-HANDLE (JOYSTICK)(LIFT)  
  1H-4393 [2] LOCKWASHER  
  3E-4313 M [2] SCREW-BUTTON HEAD (M4X0.7X8-MM)  
  [1] SWITCH AS (TRANSMISSION DOWNSHIFT)  
30. 175-2806 [1] ROD  
31. 175-2947 [1] GROMMET  
32. 194-0857 I [1] HOSE AS  
33. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
34. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
35. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
36. 3J-1907 [9] SEAL-O-RING  
37. 3K-0360 [1] SEAL-O-RING  
38. 5C-7261 M [4] NUT (M8X1.25-THD)  
39. 5P-7213 [1] WASHER-HARD (13.5X20.5X2-MM THK)  
40. 6V-5683 M [2] BOLT (M6X1X16-MM)  
41. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
42. 6V-8397 [16] SEAL-O-RING  
43. 6V-8398 [2] SEAL-O-RING  
44. 6V-8636 [2] CONNECTOR  
45. 6V-8724 [1] ELBOW  
46. 6V-8980 [7] ELBOW  
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920636
 

210-6781: CONTROL GP-PILOT OPERATED HYD

210-6781 CONTROL GP-PILOT OPERATED HYD -JOYSTICK, 3-FUNCTION
S/N BAA1-UP
i01726768 SEBP3492
2106781 CONTROL GP-PILOT OPERATED HYD Parts scheme 2106781 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-1122 [4] TAG-IDENTIFICATION (LETTERS SPL)  
2. 1V-1123 [2] TAG-IDENTIFICATION (LETTERS RET)  
3. 4J-6555 [1] SPRING  
4. 4V-9798 [2] TAG-IDENTIFICATION (LETTER, NUMBER C2)  
5. 4V-9799 [2] TAG-IDENTIFICATION (LETTER, NUMBER C1)  
6. 7K-3971 [2] TAG-IDENTIFICATION (LETTER, NUMBER L1)  
7. 7K-3972 [2] TAG-IDENTIFICATION (LETTER, NUMBER L2)  
8. 7K-3974 [2] TAG-IDENTIFICATION (LETTER, NUMBER T1)  
9. 7K-3975 [2] TAG-IDENTIFICATION (LETTER, NUMBER T2)  
10. 8T-8737 [4] PLUG-SEAL  
11. 070-0463 [1] ROD  
12. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
13. 124-4401 [1] KNOB  
14. 128-7063 [5] CONNECTOR-ORIFICE (1.7-MM)  
15. 141-9193 [1] PLATE-INSTRUMENT  
16. 143-9354 Y [1] VALVE GP-SHUTOFF (HYDRAULIC LOCKOUT)  
17. 156-9811 [2] ROD  
18. 158-3814 I [1] HOSE AS  
19. 158-3816 I [1] HOSE AS  
20. 158-3817 I [1] HOSE AS  
21. 158-3818 I [1] HOSE AS  
23. 158-3820 I [2] HOSE AS  
24. 158-8863 [1] CONTROL GP-HANDLE (JOYSTICK)(LIFT)  
  1H-4393 [2] LOCKWASHER  
  3E-4313 M [2] SCREW-BUTTON HEAD (M4X0.7X8-MM)  
  [1] SWITCH AS (TRANSMISSION DOWNSHIFT)  
25. 159-5901 I [1] HOSE AS  
26. 159-5902 I [1] HOSE AS  
27. [1] LOCK AS  
28. 177-3047 I [1] HOSE AS  
29. 212-7762 [1] COVER  
30. 213-8189 Y [1] VALVE GP-PILOT (JOYSTICK, 3-FUNCTION)  
31. 218-4407 [1] TAB  
32. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
33. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
34. 3J-1907 [10] SEAL-O-RING  
35. 5C-7261 M [4] NUT (M8X1.25-THD)  
36. 5P-7213 [1] WASHER-HARD (13.5X20.5X2-MM THK)  
37. 6V-8397 [16] SEAL-O-RING  
38. 6V-8398 [2] SEAL-O-RING  
39. 6V-8636 [2] CONNECTOR  
40. 6V-8980 [7] ELBOW  
41. 6V-8981 [1] ELBOW  
42. 6V-9001 [2] ELBOW  
43. 6V-9168 [7] NUT (11/16-16-THD)  
44. 6V-9169 [1] NUT (13/16-16-THD)  
45. 6V-9873 [1] CONNECTOR  
46. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4244 M [3] NUT (M12X1.75-THD)  
48. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
49. 8T-2562 D TRIM (0.3-M)  
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920637
 

212-8234: CONTROL GP-PILOT OPERATED HYD

212-8234 CONTROL GP-PILOT OPERATED HYD -JOYSTICK, 2-FUNCTION
S/N BAA1-UP
i01859846 SEBP3492
2128234 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-1122 [4] TAG-IDENTIFICATION (LETTERS SPL)  
2. 1V-1123 [2] TAG-IDENTIFICATION (LETTERS RET)  
3. 7K-3971 [2] TAG-IDENTIFICATION (LETTER, NUMBER L1)  
4. 7K-3972 [2] TAG-IDENTIFICATION (LETTER, NUMBER L2)  
5. 7K-3974 [2] TAG-IDENTIFICATION (LETTER, NUMBER T1)  
6. 7K-3975 [2] TAG-IDENTIFICATION (LETTER, NUMBER T2)  
7. 8T-8737 [4] PLUG-SEAL  
8. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
9. 128-7063 [5] CONNECTOR-ORIFICE (1.7-MM)  
10. 141-9193 [1] PLATE-INSTRUMENT  
11. 143-9354 Y [1] VALVE GP-SHUTOFF (HYDRAULIC LOCKOUT)  
12. 158-3814 I [1] HOSE AS  
13. 158-3816 I [1] HOSE AS  
14. 158-3817 I [1] HOSE AS  
15. 158-3818 I [1] HOSE AS  
17. 158-3820 I [2] HOSE AS  
18. 158-8863 [1] CONTROL GP-HANDLE (JOYSTICK)  
  1H-4393 [2] LOCKWASHER  
  3E-4313 M [2] SCREW-BUTTON HEAD (M4X0.7X8-MM)  
  [1] SWITCH AS (TRANSMISSION DOWNSHIFT)  
19. 177-3047 I [1] HOSE AS  
20. 213-8190 Y [1] VALVE GP-PILOT (JOYSTICK, 2-FUNCTION)  
21. 218-4445 [1] COVER  
22. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
24. 3J-1907 [8] SEAL-O-RING  
25. 5C-7261 M [4] NUT (M8X1.25-THD)  
26. 6V-8397 [12] SEAL-O-RING  
27. 6V-8398 [2] SEAL-O-RING  
28. 6V-8636 [2] CONNECTOR  
29. 6V-8980 [5] ELBOW  
30. 6V-8981 [1] ELBOW  
31. 6V-9168 [5] NUT (11/16-16-THD)  
32. 6V-9169 [1] NUT (13/16-16-THD)  
33. 6V-9873 [1] CONNECTOR  
34. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4244 M [1] NUT (M12X1.75-THD)  
36. 8T-2562 D TRIM (0.3-M)  
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920638
 

141-8802: CONTROL GP-STEERING

141-8802 CONTROL GP-STEERING -HMU STEERING
S/N BAA1-UP
PART OF 185-7631 CAB AR-ENCLOSED ROPS, 203-9835 CANOPY AR-OPEN ROPS
Type 1
i00796383 SEBP3492
1418802 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-3360 [1] BUTTON AS-HORN  
2. 8R-2918 [1] KNOB AS  
3. 105-3477 M [1] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
4. 123-6713 [1] WEDGE  
5. 141-8803 J [1] COLUMN AS  
6. 141-8808 [1] COVER AS (RH)  
7. 141-8811 [1] COVER AS (LH)  
8. 144-0896 [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
9. 146-3793 [1] STEERING WHEEL  
10. 6V-5683 M [4] BOLT (M6X1X16-MM)  
11. 8T-1159 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
12. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
14. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
15. 124-0065 [1] BLOCK  
16. 255-8545 [1] WASHER-RUBBER (21.5X55X2-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  149-2906 J [1] KIT-NUT  
  228-5847 J [1] KIT-SHAFT  
  220-3933 J [2] KIT-HORN  
    (INCLUDES HORN CONTACT, SCREWS, & GREASE)
  145-8867 J [1] KIT-GAS ASSIST  
    (INLCUDES GAS SPRING, DOWELS, SHAFT PROTECTOR TOOL, SHOULDER SCREWS, & COMPRESSION SCREEN)
  149-2907 J [1] KIT-TILT LEVER  
    (INCLUDES TILT LEVER & DOWEL PIN)
  J   KIT(S) MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP34920639
 

141-8802: CONTROL GP-STEERING

141-8802 CONTROL GP-STEERING -HMU STEERING
S/N BAA1-UP
PART OF 185-7631 CAB AR-ENCLOSED ROPS, 203-9835 CANOPY AR-OPEN ROPS
Type 2
i02500505 SEBP3492
1418802 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-3360 [1] BUTTON AS-HORN  
2. 8R-2918 [1] KNOB AS  
3. 105-3477 M [1] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
4. 123-6713 [1] WEDGE  
5. 124-0065 [1] BLOCK  
6. 141-8808 [1] COVER AS (RH)  
7. 141-8811 [1] COVER AS (LH)  
8. 144-0896 [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
9. 146-3793 [1] STEERING WHEEL  
10. 223-3667 CY [1] STEERING COLUMN GP-ADJUSTABLE  
11. 255-8545 [2] WASHER-RUBBER (21.5X55X2-MM THK)  
12. 291-5392 [1] BOOT (HMU)  
13. 099-7241 [1] WASHER-HARD (19X34X3-MM THK)  
14. 6V-5683 M [4] BOLT (M6X1X16-MM)  
15. 8T-1159 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
16. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
18. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Handle Control (Lift)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Service Magazine
Improved Modular Handle Group Is Now Used {5063, 5705}
2005/07/11
An Improved Handle Control Group is Now Available {5063, 5705}
2006/11/20

Caterpillar Parts SIS Catalog 950G II :

CONDENSER & MTG GP-REFRIGERANT
209-5806 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
394-9671 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
216-9818 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
203-9835 CANOPY AR-OPEN ROPS
185-7631 CAB AR-ENCLOSED ROPS
ARMREST GP
8Y-5904 ARMREST GP
ARMREST GP
292-1302 ARMREST GP
CONTROL GP-MONITOR
103-5526 CONTROL GP-MONITOR
CONTROL GP-MONITOR
246-9199 CONTROL GP-MONITOR
CONTROL GP-MONITOR
283-1636 CONTROL GP-MONITOR
CONTROL GP-PILOT OPERATED HYD
188-9709 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
190-5005 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
210-6781 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
212-8234 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-STEERING
141-8802 CONTROL GP-STEERING

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.