AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

185-5311 SUPPORT GP-HYDRAULIC CONTROL S/N BAA1-UP PART OF 185-7631 CAB AR-ENCLOSED ROPS 950G II WHEEL LOADER


OPERATOR STATION
SUPPORT GP
SUPPRESSION GP
SEAT GP
WASHER GP-WINDOW
CAB GP
WASHER GP-WINDOW

WHEEL LOADER 950G II WHEEL LOADER BAA
 950G II WHEEL LOADER BAA00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3492 950G II BAA   (1999)

OPERATOR STATION

SUPPORT GP
SUPPORT GP-HYDRAULIC CONTROL
185-5311 SUPPORT GP-HYDRAULIC CONTROL
SUPPORT GP-HYDRAULIC CONTROL
222-2789 SUPPORT GP-HYDRAULIC CONTROL
 

#SEBP34920730
 

185-5311: SUPPORT GP-HYDRAULIC CONTROL

185-5311 SUPPORT GP-HYDRAULIC CONTROL
S/N BAA1-UP
PART OF 185-7631 CAB AR-ENCLOSED ROPS
i01484828 SEBP3492
1855311 SUPPORT GP-HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 8Y-5746 [1] ASHTRAY  
3. 8Y-6334 [1] GASKET (ASHTRAY)  
4. 187-2082 [1] LEVER-CONTROL  
5. 149-2582 [1] PLATE AS  
6. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
7. 173-2217 [1] CUSHION AS  
8. 185-5315 [1] BRACKET  
9. 185-5316 [1] SUPPORT AS  
10. 219-0467 [1] SUPPORT AS  
11. 185-5319 [1] COVER  
12. 219-0465 [1] COVER AS  
13. 201-0575 [1] SUPPORT AS  
14. 187-1878 [1] WASHER-PLASTIC (8.1X19X3.2-MM THK)  
15. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
16. 7X-7729 [3] WASHER (11X25X3-MM THK)  
17. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
18. 8T-4138 M [2] BOLT (M6X1X20-MM)  
19. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 9X-2041 M [13] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
21. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
22. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
23. 5P-6120 D TRIM-EDGE (.1M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP34920731
 

222-2789: SUPPORT GP-HYDRAULIC CONTROL

222-2789 SUPPORT GP-HYDRAULIC CONTROL
S/N BAA1-UP
PART OF 203-9835 CANOPY AR-OPEN ROPS
i01851292 SEBP3492
2222789 SUPPORT GP-HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 8Y-5746 [1] ASHTRAY  
3. 8Y-6334 [1] GASKET (ASHTRAY)  
4. 187-2082 [1] LEVER-CONTROL  
5. [1] PLATE AS  
6. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
7. 173-2217 [1] CUSHION AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
8. 185-5315 [1] BRACKET  
9. 185-5316 [1] SUPPORT AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
10. 219-0467 [1] SUPPORT AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [2] LINK  
  8T-3490 M [5] NUT-WELD (M10X1.5-THD)  
  8T-3851 M [1] BOSS-WELD (M10X1.5X17.5-MM)  
11. 185-5319 [1] COVER  
12. 219-0465 [1] COVER AS  
13. 201-0575 [1] SUPPORT AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  7T-1099 [3] LINK  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3851 M [1] BOSS-WELD (M10X1.5X17.5-MM)  
14. 187-1878 [1] WASHER-PLASTIC (8.1X19X3.2-MM THK)  
15. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. [1] ANGLE  
17. 3T-4509 [1] PLATE  
18. 8T-4138 M [2] BOLT (M6X1X20-MM)  
19. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 9X-2041 M [15] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
21. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
22. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
23. 5P-6120 D TRIM-EDGE (0.1-M)  
24. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4133 M [4] NUT (M10X1.5-THD)  
26. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
27. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP34920732
 

229-8216: SUPPRESSION GP-CAB SOUND

229-8216 SUPPRESSION GP-CAB SOUND
S/N BAA355-UP
PART OF 185-7631 CAB AR-ENCLOSED ROPS
i02086020 SEBP3492
2298216 SUPPRESSION GP-CAB SOUND Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4168 [1] INSULATION  
2. 228-4428 [1] INSULATION  
 

#SEBP34920733
 

172-9444: SUSPENSION GP-SEAT

172-9444 SUSPENSION GP-SEAT -AIR
S/N BAA1-UP
PART OF 178-7916 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
i01487065 SEBP3492
1729444 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-4818 [4] LOCKWASHER (EXTERNAL TOOTH)  
2. 8Y-6917 [1] BOOT  
3. 102-6317 [2] BUMPER  
4. 123-8157 [2] SHAFT  
5. 123-9131 [1] ABSORBER AS-SHOCK  
6. 124-7126 [1] SCISSORS AS  
7. 124-7128 [1] BUSHING-RELIEF  
8. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
9. 147-4549 [1] FITTING-ELBOW  
10. 147-6522 [1] SPRING  
11. 149-2399 [1] FITTING  
12. 149-2400 [1] FITTING  
13. 149-2403 [1] VALVE AS  
14. 160-7765 [1] WASHER (16.26X22.23X1.97-MM THK)  
15. 160-7766 B [3] WASHER (16.26X22.23X0.51-MM THK)  
16. 160-7767 B [8] WASHER (3.68X12.57X0.51-MM THK)  
17. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
18. 171-4045 [1] HOUSING AS  
19. 1B-4430 [4] NUT-JAM (1/2-20-THD)  
20. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
21. 4V-7884 [2] BEARING  
22. 4V-8556 [1] BOLT (3/8-16X2.20-IN)  
23. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
24. 6K-0806 [1] STRAP-CABLE  
25. 8L-8413 [4] STRAP-CABLE (WHITE)  
26. 8M-3267 [1] SCREW-HEX SOCKET (3/8-16X0.75-IN)  
27. 8Y-6922 [1] HOUSING AS  
28. 9M-0164 [1] CLAMP-HOSE  
29. 147-6541 E TUBE (38CM)  
30. JZ [1] COMPRESSOR AS  
31. JZ [1] SLEEVE  
32. LZ [30] CLIP  
33. NZ [4] BEARING  
34. NZ [4] ROLLER  
35. VZ [2] TETHER  
   
    AVAILABLE REPAIR KIT(S):
  149-2398 J [1] KIT-AIR COMPRESSOR  
  8Y-6928 L [1] KIT-FASTENER  
  123-9128 N [1] KIT-ROLLER  
    (INCLUDES TIE WRAP)
  128-0613 V [1] KIT-TETHER  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REPAIR KIT MARKED J INCLUDES PART(S) MARKED J
  L   REPAIR KIT MARKED L INCLUDES PART(S) MARKED L
  N   REPAIR KIT MARKED N INCLUDES PART(S) MARKED N
  V   REPAIR KIT MARKED V INCLUDES PART(S) MARKED V
  Z   NOT SERVICED SEPARATELY
 

#SEBP34920734
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N BAA1-UP
PART OF 219-8096 SEAT GP-SUSPENSION
i01816125 SEBP3492
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [33] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 192-7760 [1] SHAFT  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  211-5358 E CONDUIT-FLEXIBLE (64-CM)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 192-7822 [1] SHAFT  
23. 237-3943 [1] BRACKET  
24. 237-3970 Y [1] AIR COMPRESSOR GP-SEAT  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.267-M)  
31A. 5P-6010 D TUBE (0.356-M)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 B [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920735
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N BAA380-UP
PART OF 219-8096 SEAT GP-SUSPENSION
Type 1
i05781895 SEBP3492
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  211-5358 E CONDUIT-FLEXIBLE (64-CM)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
23. 372-2158 C [1] BRACKET-MOUNTING  
24. 370-9894 C [1] COMPRESSOR AS  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.27-M)  
31A. 5P-6010 D TUBE (0.36-M)  
32. 387-0314 C [1] WIRE AS (16-GA, ORANGE)  
33. 387-0317 C [1] WIRE AS (16-GA, BLACK)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP34920736
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N BAA380-UP
PART OF 219-8096 SEAT GP-SUSPENSION
Type 2
i05823827 SEBP3492
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 CY [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (29-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (43-CM)  
32. 442-8151 C [1] CLIP-CABLE  
33. 3S-2093 C [5] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  452-6716 CY [1] KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT)  
    (INCLUDES SCREWS, COMPRESSOR AS, BRACKET, STRAPS & HOSE)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920737
 

155-4774: TANK GP-WINDOW WASHER

155-4774 TANK GP-WINDOW WASHER
S/N BAA1-UP
PART OF 126-7695 WASHER GP-WINDOW
i00808667 SEBP3492
1554774 TANK GP-WINDOW WASHER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-8890 [2] PUMP AS-WASHER (24-VOLT)  
2. 8T-5913 [2] SCREEN-FILTER (WINDOW WASHER PUMP)  
3. 8T-5914 [2] GROMMET  
4. 155-4777 [1] RESERVOIR  
5. 322-4964 [1] CAP-VENTED (WINDOW WASHER TANK)  
 

#SEBP34920738
 

131-2633: VISOR GP-CAB

131-2633 VISOR GP-CAB
S/N BAA1-UP
i01105997 SEBP3492
1312633 VISOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-4627 M [2] SCREW-MACHINE (M6X1X30-MM)  
2. 123-4371 [1] VISOR AS  
  M   METRIC PART
 

#SEBP34920739
 

126-7695: WASHER GP-WINDOW

126-7695 WASHER GP-WINDOW
S/N BAA1-UP
PART OF 215-6922 CHASSIS AR
i00791739 SEBP3492
1267695 WASHER GP-WINDOW Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-4774 Y [1] TANK GP-WINDOW WASHER  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G II :

STEERING COLUMN GP-ADJUSTABLE
223-3667 STEERING COLUMN GP-ADJUSTABLE
SEAT GP-SUSPENSION
230-4126 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
219-8096 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
204-4491 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
202-0443 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
202-0443 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
188-9672 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
188-9672 SEAT GP-SUSPENSION
SUPPORT GP-HYDRAULIC CONTROL
222-2789 SUPPORT GP-HYDRAULIC CONTROL
SUPPRESSION GP-CAB SOUND
229-8216 SUPPRESSION GP-CAB SOUND
SUSPENSION GP-SEAT
172-9444 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
TANK GP-WINDOW WASHER
155-4774 TANK GP-WINDOW WASHER
VISOR GP-CAB
131-2633 VISOR GP-CAB

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.