OPERATOR STATION
AIR CONDITIONER GPWIPER GP-WINDOW
SEAT GP
OPERATOR STATION
AIR CONDITIONER GP#SEBP34930550
190-1249: AIR CONDITIONER GP
Parts for your IT62G II INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP34930551
276-3965: AIR CONDITIONER GP
Parts for your IT62G II INTEGRATED TOOLCARRIER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
2. | 119-9631 | [1] | SWITCH-TEMPERATURE | |
3. | 3S-2093 | [1] | STRAP-CABLE | |
4. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
5. | 8C-7581 M | [1] | SCREW-MACHINE (M4X0.7X8-MM) | |
6. | 125-9740 | [1] | RESISTOR | |
7. | 133-9012 | [1] | FUSE (15-AMPERE) | |
8. | 177-6696 | [1] | GROMMET | |
9. | 177-6704 | [2] | GASKET | |
10. | 177-6716 | [1] | DOOR | |
11. | 177-6727 | [1] | ACTUATOR | |
12. | 320-1457 | [1] | DOOR AS | |
208-2929 | [2] | GASKET | ||
4K-9429 | [4] | RIVET-POP | ||
187-7719 M | [1] | SCREW-HEX FLANGE (M5X2.24X14-MM) | ||
13. | 179-4682 | [2] | LEVER | |
14. | 179-4683 | [1] | ROD | |
15. | 185-4778 | [1] | HOUSING AS | |
16. | 185-4780 | [1] | HOUSING | |
17. | 185-4782 | [1] | HOUSING | |
18. | 185-4783 | [1] | COVER | |
19. | 185-4785 | [1] | DUCT AS | |
20. | 187-7719 M | [24] | SCREW-HEX FLANGE (M5X2.24X14-MM) | |
21. | 188-7690 | [1] | SUPPORT | |
22. | 189-4680 | [1] | COIL AS-EVAPORATOR | |
23. | 189-4682 | [1] | COIL AS-HEATER | |
24. | 192-2820 | [1] | PLATE | |
25. | 192-2822 | [1] | GASKET | |
26. | 192-2823 | [1] | HARNESS AS-HEATER & AIR COND | |
6T-6505 | [7] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
9W-0852 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
9G-3695 | [3] | PLUG-SEAL | ||
100-6674 | [3] | SEAL-CONNECTOR | ||
9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
6T-6506 | [7] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
27. | 193-0702 | [1] | GASKET | |
28. | 197-1397 | [1] | BRACKET | |
29. | 197-1398 | [1] | BRACKET | |
30. | 197-1399 | [1] | BRACKET | |
31. | 329-4959 | [1] | BRACKET AS | |
32. | 199-7499 | [1] | GASKET | |
33. | 202-1327 | [1] | GASKET | |
34. | 212-7042 | [1] | BRACKET | |
35. | 268-8792 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
36. | 129-3178 M | [7] | LOCKNUT (M6X1-THD) | |
37. | 130-5300 | [1] | CLIP | |
38. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
39. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
40. | 5C-9553 M | [8] | BOLT (M6X1X16-MM) | |
41. | 5P-4115 | [3] | WASHER-HARD (7.2X19X2-MM THK) | |
42. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
43. | 9M-8406 | [1] | CLIP (LOOP) | |
44. | 6V-7357 M | [3] | BOLT (M6X1X25-MM) | |
45. | 8T-4205 | [11] | WASHER-HARD (7.2X14.5X2-MM THK) | |
46. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
47. | 9X-7373 | [1] | GROMMET | |
48. | 5P-5927 D | SEAL (1-M) | ||
49. | 5P-5639 D | SEAL (1-M) | ||
50. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
D | ORDER BY THE METER | |||
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART |
#SEBP34930552
276-3965: AIR CONDITIONER GP
Parts for your IT62G II INTEGRATED TOOLCARRIER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
2. | 119-9631 | [1] | SWITCH-TEMPERATURE | |
3. | 3S-2093 | [1] | STRAP-CABLE | |
4. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
5. | 8C-7581 M | [1] | SCREW-MACHINE (M4X0.7X8-MM) | |
6. | 125-9740 | [1] | RESISTOR | |
7. | 133-9012 | [1] | FUSE (15-AMPERE) | |
8. | 177-6696 | [1] | GROMMET | |
9. | 177-6704 | [2] | GASKET | |
10. | 177-6716 | [1] | DOOR | |
11. | 177-6727 | [1] | ACTUATOR | |
12. | 320-1457 | [1] | DOOR AS | |
208-2929 | [2] | GASKET | ||
4K-9429 | [4] | RIVET-POP | ||
187-7719 M | [1] | SCREW-HEX FLANGE (M5X2.24X14-MM) | ||
13. | 179-4682 | [2] | LEVER | |
14. | 179-4683 | [1] | ROD | |
15. | 185-4778 | [1] | HOUSING AS | |
16. | 185-4780 | [1] | HOUSING | |
17. | 185-4782 | [1] | HOUSING | |
18. | 185-4783 | [1] | COVER | |
19. | 185-4785 | [1] | DUCT AS | |
20. | 187-7719 M | [24] | SCREW-HEX FLANGE (M5X2.24X14-MM) | |
21. | 188-7690 | [1] | SUPPORT | |
22. | 189-4680 | [1] | COIL AS-EVAPORATOR | |
23. | 189-4682 | [1] | COIL AS-HEATER | |
24. | 192-2820 | [1] | PLATE | |
25. | 192-2822 | [1] | GASKET | |
26. | 192-2823 | [1] | HARNESS AS-HEATER & AIR COND | |
6T-6505 | [7] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
9W-0852 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
9G-3695 | [3] | PLUG-SEAL | ||
100-6674 | [3] | SEAL-CONNECTOR | ||
9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
6T-6506 | [7] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
27. | 193-0702 | [1] | GASKET | |
28. | 197-1397 | [1] | BRACKET | |
29. | 197-1398 | [1] | BRACKET | |
30. | 197-1399 | [1] | BRACKET | |
31. | 329-4959 | [1] | BRACKET AS | |
32. | 199-7499 | [1] | GASKET | |
33. | 202-1327 | [1] | GASKET | |
34. | 212-7042 | [1] | BRACKET | |
35. | 268-8792 C | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
36. | 129-3178 M | [7] | LOCKNUT (M6X1-THD) | |
37. | 130-5300 | [1] | CLIP | |
38. | 7X-0490 CM | [1] | BOLT (M6X1X200-MM) | |
39. | 342-0606 C | [2] | WASHER-HARD (5.5X11X1.6-MM THK) | |
40. | 5C-9553 M | [8] | BOLT (M6X1X16-MM) | |
41. | 5P-4115 | [3] | WASHER-HARD (7.2X19X2-MM THK) | |
42. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
43. | 9M-8406 | [1] | CLIP (LOOP) | |
44. | 6V-7357 M | [3] | BOLT (M6X1X25-MM) | |
45. | 8T-4205 | [11] | WASHER-HARD (7.2X14.5X2-MM THK) | |
46. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
47. | 9X-7373 | [1] | GROMMET | |
48. | 5P-5927 D | SEAL (1-M) | ||
49. | 5P-5639 D | SEAL (1-M) | ||
50. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
51. | 322-4474 C | [1] | FILM-INFORMATION (24-VOLT HEATER) | |
C | CHANGE FROM PREVIOUS TYPE | |||
D | ORDER BY THE METER | |||
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART |
#SEBP34930553
214-7634: ARM GP-WINDOW WIPER
#SEBP34930554
214-7635: ARM GP-WINDOW WIPER
#SEBP34930555
162-8447: ARMREST GP
Parts for your IT62G II INTEGRATED TOOLCARRIER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8Y-5904 Y | [1] | ARMREST GP | |
2. | [1] | BOLT | ||
3. | 163-1149 | [1] | BRACKET AS (LH) | |
4. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
5. | 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | |
6. | 4H-0094 | [1] | RING-RETAINING | |
7. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
8. | 7X-0521 | [1] | WASHER-HARD (20X36.5X5-MM THK) | |
9. | 9X-8873 | [1] | BOLT (1/2-13X2.25-IN) | |
Y | SEPARATE ILLUSTRATION |
#SEBP34930556
162-8448: ARMREST GP
Parts for your IT62G II INTEGRATED TOOLCARRIER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8Y-5904 Y | [1] | ARMREST GP | |
2. | [1] | BOLT | ||
3. | 163-1148 | [1] | BRACKET AS (RH) | |
4. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
5. | 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | |
6. | 4H-0094 | [1] | RING-RETAINING | |
7. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
8. | 7X-0521 | [1] | WASHER-HARD (20X36.5X5-MM THK) | |
9. | 9X-8873 | [1] | BOLT (1/2-13X2.25-IN) | |
Y | SEPARATE ILLUSTRATION |
#SEBP34930557
292-1301: ARMREST GP
Parts for your IT62G II INTEGRATED TOOLCARRIER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6A-9083 M | [1] | SCREW-MACHINE (M6X1X15-MM) | |
2. | 163-1149 | [1] | BRACKET AS (LH) | |
3. | 278-5457 | [1] | ARMREST AS (LH) | |
6A-9083 M | [1] | SCREW-MACHINE (M6X1X15-MM) | ||
278-2564 | [1] | PAD AS | ||
4. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN) | |
5. | 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | |
6. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
M | METRIC PART |
#SEBP34930558
292-1302: ARMREST GP
Parts for your IT62G II INTEGRATED TOOLCARRIER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6A-9083 M | [1] | SCREW-MACHINE (M6X1X15-MM) | |
2. | 163-1148 | [1] | BRACKET AS (RH) | |
3. | 278-5457 | [1] | ARMREST AS (RH) | |
6A-9083 M | [1] | SCREW-MACHINE (M6X1X15-MM) | ||
278-2564 | [1] | PAD AS | ||
4. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN) | |
5. | 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | |
6. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
M | METRIC PART |
#SEBP34930559
8Y-5904: ARMREST GP
Parts for your IT62G II INTEGRATED TOOLCARRIER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8Y-5906 | [1] | BASE-ARMREST | |
2. | 8S-7803 L | [1] | RING-RETAINING | |
3. | 6V-2687 J | [4] | SCREW-PAN HEAD (10-24X1-IN) | |
4. | 8T-8641 L | [1] | WASHER (9.8X16X0.8-MM THK) | |
5. | 3E-4312 L | [1] | NUT-SQUARE (3/8-16-THD) | |
6. | 8Y-5914 | [1] | SPRING | |
AVAILABLE REPAIR KIT(S): | ||||
8Y-5988 J | [1] | KIT-CUSHION | ||
8Y-6028 L | [1] | KIT-ADJUSTER | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
L | KIT MARKED L SERVICES PART(S) MARKED L |
Information:
OPERATOR STATION
AIR CONDITIONER GP
Operation and Maintenance Manual
Receiver Dryer (Refrigerant) - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Specifications
System Capacities for Refrigerant (Integrated Toolcarriers)
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Systems Operation
Refrigerant Compressor Protection System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Air Conditioning System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Cab Pressurization and Filtration System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Custom Service Information
System Capacities for Refrigerant (Integrated Toolcarriers)
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Testing and Adjusting
Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Remove
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Testing and Adjusting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting
Machine Preparation for Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Condensate Drainage System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Heating and Air Conditioning Control System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Disassembly and Assembly
Refrigerant Expansion Valve - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Evaporator Coil and Heater Coil - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Evaporator Coil and Heater Coil - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Refrigerant Compressor - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Refrigerant Condenser - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Air Conditioner Lines - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
In-Line Refrigerant Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Magazine
Caterpillar Parts SIS Catalog IT62G II :
Truck sale:
$140,955 USD