HYDRAULIC SYSTEM
CONTROL GP-FANCYLINDER GP
CONTROL GP-RIDE
CYLINDER GP
HYDRAULIC SYSTEM
CONTROL GP-FAN
#SEBP34940570
227-5345: CONTROL & LINES GP-FAN
For full view, you need register
Parts for your 950G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2T-2099 I | [2] | HOSE AS | |
| 2. | 3S-2093 | [7] | STRAP-CABLE | |
| 3. | 7K-1181 | [4] | STRAP-CABLE | |
| 4. | 133-3260 | [1] | SPACER (11X19X10-MM THK) | |
| 5. | 135-1741 | [1] | PLATE AS | |
| 6. | 149-2406 | [1] | BRACKET | |
| 7. | 162-2191 Y | [1] | VALVE GP-FAN REVERSING | |
| 8. | 188-9883 | [2] | ELBOW | |
| 9. | 189-8336 | [1] | HARNESS AS-CAB (AUTOMATIC REVERSING FAN) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 10. | 189-8353 | [1] | BRACKET AS | |
| 11. | 189-8356 | [1] | PLATE | |
| 12. | 189-8367 I | [1] | HOSE AS | |
| 13. | 189-8368 I | [1] | HOSE AS | |
| 14. | 189-8369 I | [1] | HOSE AS | |
| 15. | 189-8375 | [1] | BRACKET AS | |
| 16. | 189-8377 | [1] | BRACKET AS | |
| 17. | 189-8378 Y | [1] | HARDWARE GP-REAR FRAME | |
| 18. | 189-8413 | [1] | HARNESS AS-CHASSIS (AUTOMATIC REVERSING FAN) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 19. | 227-5143 Y | [1] | GUARD GP-CRANKCASE | |
| 20. | 228-8527 Y | [1] | MOTOR GP-PISTON (AUTOMATIC REVERSING FAN) | |
| 21. | 148-8327 | [4] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8637 | [1] | CONNECTOR | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 22. | 148-8364 | [1] | ELBOW AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8625 | [1] | ELBOW | ||
| 23. | 164-5572 | [1] | UNION AS | |
| 6V-8398 | [2] | SEAL-O-RING | ||
| 6V-8731 | [1] | UNION | ||
| 24. | 164-5606 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 8T-0078 | [1] | CONNECTOR | ||
| 25. | 219-9534 | [1] | SWITCH AS-ROCKER (24-VOLT)(REVERSING FAN) | |
| 26. | 3D-2824 | [2] | SEAL-O-RING | |
| 27. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| 28. | 6V-1889 | [1] | CLIP (LOOP) | |
| 29. | 7X-7729 | [7] | WASHER (11X25X3-MM THK) | |
| 30. | 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 32. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 33. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 34. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 35. | 9D-1829 | [1] | CLIP | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34940571
230-3123: CONTROL AR-FAN
For full view, you need register
Parts for your 950G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 227-5345 Y | [1] | CONTROL & LINES GP-FAN (AUTOMATIC REVERSING) | ||
| 221-7000 Y | [1] | GRILL GP-RADIATOR | ||
| 229-0293 Y | [1] | PUMP GP-PISTON (AUTOMATIC REVERSING FAN) | ||
| 230-3124 Y | [1] | SHIELD GP-HEAT (EXHAUST) | ||
| 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | ||
| 7X-2539 M | [1] | BOLT (M8X1.25X110-MM) | ||
| 194-5141 | [1] | GUARD (AIR CONDITIONER COMPR PULLEY) | ||
| 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34940572
209-2426: CONTROL AR-HIGH LIFT
For full view, you need register
Parts for your 950G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 209-2424 Y | [1] | ARM & BEARING AS-LIFT (HIGH LIFT MACHINES) | ||
| 126-7724 Y | [1] | COUNTERWEIGHT GP | ||
| 163-1741 Y | [1] | CYLINDER GP-TILT (HIGH LIFT MACHINES) | ||
| 142-4922 | [1] | LINK & BEARING AS | ||
| 3G-8779 | [2] | BUSHING | ||
| 211-7764 Y | [1] | WIRING GP-SENSOR (TILT POSITION) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34940573
209-2428: CONTROL AR-HIGH LIFT
209-2428 CONTROL AR-HIGH LIFT -3-VALVE HYDRAULICS
S/N AXR1-UP
REPLACED BY @@@@@234-3083@@@@@
FOR USE WITH @@@@@192-4677@@@@@
S/N AXR1-UP
REPLACED BY @@@@@234-3083@@@@@
FOR USE WITH @@@@@192-4677@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 209-2425 Y | [1] | ARM GP-LIFT (HIGH LIFT MACHINES) | ||
| 126-7724 Y | [1] | COUNTERWEIGHT GP | ||
| 163-1741 Y | [1] | CYLINDER GP-TILT (HIGH LIFT MACHINES) | ||
| 211-7764 Y | [1] | WIRING GP-SENSOR (TILT POSITION) | ||
| 142-4922 | [1] | LINK & BEARING AS | ||
| 3G-8779 | [2] | BUSHING | ||
| 2Q-8269 | [1] | TUBE AS | ||
| 2Q-8270 | [1] | TUBE AS | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34940574
234-3081: CONTROL AR-HIGH LIFT
234-3081 CONTROL AR-HIGH LIFT
S/N AXR1-UP
S/N AXR1-UP
For full view, you need register
Parts for your 950G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 232-7635 Y | [1] | CONTROL GP-BUCKET (HIGH LIFT MACHINES) | ||
| 126-7724 Y | [1] | COUNTERWEIGHT GP | ||
| 232-7639 Y | [1] | CYLINDER & SEAL GP-TILT | ||
| 208-3906 | [1] | ARM AS-BAIL | ||
| 225-5160 | [1] | HARNESS AS-CONTROL (TILT POSITION SENSOR) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS, WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34940575
234-3083: CONTROL AR-HIGH LIFT
234-3083 CONTROL AR-HIGH LIFT -3-VALVE HYDRAULICS
S/N AXR1-UP
FOR USE WITH @@@@@192-4677@@@@@
S/N AXR1-UP
FOR USE WITH @@@@@192-4677@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 232-7636 Y | [1] | ARM GP-LIFT (HIGH LIFT MACHINES) | ||
| 232-7635 Y | [1] | CONTROL GP-BUCKET (HIGH LIFT MACHINES) | ||
| 126-7724 Y | [1] | COUNTERWEIGHT GP | ||
| 232-7639 Y | [1] | CYLINDER & SEAL GP-TILT | ||
| 208-3906 | [1] | ARM AS-BAIL | ||
| 225-5160 | [1] | HARNESS AS-CONTROL (TILT POSITION SENSOR) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS, WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE) | ||||
| 244-5575 | [2] | TUBE AS | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34940576
201-0321: CONTROL AR-RIDE
201-0321 CONTROL AR-RIDE
S/N AXR1-UP
PART OF 257-2191, 267-2094 MACHINE AR
FOR USE WITH 2 VALVE E/H HYDRAULIC SYSTEM
S/N AXR1-UP
PART OF 257-2191, 267-2094 MACHINE AR
FOR USE WITH 2 VALVE E/H HYDRAULIC SYSTEM
For full view, you need register
#SEBP34940577
201-0322: CONTROL AR-RIDE
201-0322 CONTROL AR-RIDE
S/N AXR1-UP
FOR USE WITH 3 VALVE, E/H, NON-LOGGING, HYDRAULIC SYSTEM
S/N AXR1-UP
FOR USE WITH 3 VALVE, E/H, NON-LOGGING, HYDRAULIC SYSTEM
For full view, you need register
#SEBP34940578
202-8125: CONTROL AR-RIDE
For full view, you need register
#SEBP34940579
112-6986: CYLINDER & SEAL GP-LIFT
112-6986 CYLINDER & SEAL GP-LIFT -LH
S/N AXR1-UP
PART OF 191-8991 HYDRAULIC AR-2 VALVE
S/N AXR1-UP
PART OF 191-8991 HYDRAULIC AR-2 VALVE
For full view, you need register
