AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

446-4917 CONTROL GP-HANDLE S/N AXR1-UP WITHOUT TRIGGER PART OF 464-4860 CONTROL & MTG GP-JOYSTICK 950G II


OPERATOR STATION
CONTROL GP-HANDLE
CONTROL GP-JOYSTICK
MONITOR GP
CONTROL GP-STEERING
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-UNPROGRAMMED
OPERATOR STATION
DOOR GP

WHEEL LOADER 950G II WHEEL LOADER AXR
 950G II Wheel Loader AXR00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3494 950G II AXR   (2002)

OPERATOR STATION

CONTROL GP-HANDLE
CONTROL GP-HANDLE
206-7418 CONTROL GP-HANDLE
CONTROL GP-HANDLE
206-7419 CONTROL GP-HANDLE
CONTROL GP-HANDLE
230-9072 CONTROL GP-HANDLE
CONTROL GP-HANDLE
445-9510 CONTROL GP-HANDLE
CONTROL GP-HANDLE
446-4917 CONTROL GP-HANDLE
 

#SEBP34940770
 

446-4917: CONTROL GP-HANDLE

446-4917 CONTROL GP-HANDLE
S/N AXR1-UP
WITHOUT TRIGGER
PART OF 464-4860 CONTROL & MTG GP-JOYSTICK
i06707492 SEBP3494
4464917 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
2. 208-6081 [1] SLEEVE  
3. 6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M EACH)  
4. 434-3206 [1] CONTROL GP-SWITCH  
5. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
6. 9B-1117 [2] LOCKWASHER  
7. 218-7136 E SLEEVE (36-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP34940771
 

208-6060: CONTROL GP-JOYSTICK

208-6060 CONTROL GP-JOYSTICK -3-FUNCTION WITH AUTODIG
S/N AXR315-UP
PART OF 332-9285 CONTROL GP-ELECTROHYDRAULIC
i02272746 SEBP3494
2086060 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-4476 M [8] SCREW-PAN HEAD (M4X0.7X35-MM)  
3. 228-0850 [2] DETENT GP-CONTROL (JOYSTICK, LIFT, TILT)  
    (EACH INCLUDES)
  107-1964 [4] SCREW-PAN HEAD (6-19X0.5-IN)  
  033-9139 [1] RING-RETAINING  
4. 230-9072 Y [1] CONTROL GP-HANDLE (LIFT, TILT, AUXILIARY, AUTODIG)  
5. 151-4977 [12] WASHER (4.445X9.525X1.092-MM THK)  
6. 175-3265 [1] SCREW (8-16X0.63-IN)  
7. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
8. 257-2531 C [1] SENSOR GP-POSITION (LIFT)  
9. 257-2532 C [1] SENSOR-POSITION (TILT)  
10. 2K-4898 [1] CLAMP-TUBE  
11. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
12. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 8T-8737 [1] PLUG-SEAL  
15. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 208-6081 [1] SLEEVE  
17. 102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 175-1529 [1] BOOT  
19. 178-5077 [1] PLATE  
20. [4] SCREW-FLAT HEAD  
21. 363-9926 Y [1] CONTROL & MTG GP-JOYSTICK  
22. 230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
23. 237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34940772
 

220-6102: CONTROL GP-JOYSTICK

220-6102 CONTROL GP-JOYSTICK -2-FUNCTION WITH AUTODIG
S/N AXR1-UP
PART OF 233-0208 CONTROL GP-ELECTROHYDRAULIC
i02089875 SEBP3494
2206102 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-4476 M [8] SCREW-PAN HEAD (M4X0.7X35-MM)  
3. 206-7419 Y [1] CONTROL GP-HANDLE (LIFT, TILT, AUTODIG)  
4. 228-0850 [2] DETENT GP-CONTROL (JOYSTICK, LIFT, TILT)  
5. 151-4977 [12] WASHER (4.445X9.525X1.092-MM THK)  
6. 175-3265 [1] SCREW (8-16X0.63-IN)  
7. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
8. 257-2531 [1] SENSOR GP-POSITION (LIFT)  
9. 257-2532 [1] SENSOR-POSITION (TILT)  
10. 2K-4898 [1] CLAMP-TUBE  
11. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
12. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 8T-8737 [1] PLUG-SEAL  
15. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
16. 3E-5180 [1] WEDGE-RECEPTACLE LOCK (12-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34940773
 

226-8664: CONTROL GP-JOYSTICK

226-8664 CONTROL GP-JOYSTICK -2-FUNCTION
S/N AXR1-UP
PART OF 213-6015 CONTROL GP-ELECTROHYDRAULIC
i02138349 SEBP3494
2268664 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-4476 M [8] SCREW-PAN HEAD (M4X0.7X35-MM)  
2. 3E-5180 [1] WEDGE-RECEPTACLE LOCK (12-PIN)  
3. 228-0850 [2] DETENT GP-CONTROL (JOYSTICK, LIFT, TILT)  
4. 206-7418 [1] CONTROL GP-HANDLE (LIFT, TILT)  
  6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(1-M)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
  208-6081 [1] SLEEVE  
  218-7136 E SLEEVE (36-CM)  
5. 151-4977 [12] WASHER (4.445X9.525X1.092-MM THK)  
6. 175-3265 [1] SCREW (8-16X0.63-IN)  
7. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
8. 257-2531 [1] SENSOR GP-POSITION (LIFT)  
9. 257-2532 [1] SENSOR-POSITION (TILT)  
10. 2K-4898 [1] CLAMP-TUBE  
11. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
12. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 8T-8737 [1] PLUG-SEAL  
15. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 208-6081 [1] SLEEVE  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP34940774
 

103-5526: CONTROL GP-MONITOR

103-5526 CONTROL GP-MONITOR -BACKLIGHT DIMMER
S/N AXR1-UP
PART OF 195-6255, 207-8617 WIRING GP-CAB
i00089832 SEBP3494
1035526 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9132 [2] SCREW-HEX FLANGE (6-32X0.187-IN)  
2. [1] BOARD AS  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 20-GA)  
 

#SEBP34940775
 

246-9199: CONTROL GP-MONITOR

246-9199 CONTROL GP-MONITOR -PAYLOAD
S/N AXR1-UP
PART OF 199-9096 MONITOR GP-PAYLOAD
i02057089 SEBP3494
2469199 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CONTROL AS-ELECTRONIC  
2. 246-9198 [1] SOFTWARE GP-MONITOR (PAYLOAD CONTROL)  
3. 8C-3078 [1] SEAL-O-RING  
4. 129-9690 [1] COVER  
5. 101-1785 [1] BATTERY (LITHIUM)  
  Z   NOT SERVICED SEPARATELY
 

#SEBP34940776
 

283-1636: CONTROL GP-MONITOR

283-1636 CONTROL GP-MONITOR -PAYLOAD
S/N AXR265-UP
PART OF 241-6254 MONITOR GP-PAYLOAD
i02473300 SEBP3494
2831636 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 283-1635 [1] SOFTWARE GP-MONITOR (PAYLOAD CONTROL SYSTEM)  
2. 8C-3078 [1] SEAL-O-RING  
3. 129-9690 [1] COVER  
4. 193-5488 [1] BATTERY (LITHIUM)  
 

#SEBP34940777
 

219-7619: CONTROL GP-STEERING

219-7619 CONTROL GP-STEERING -COMMAND CONTROL STEERING
S/N AXR1-UP
PART OF 185-7632 CAB AR, 204-4489 CANOPY AR-OPEN ROPS
i01776396 SEBP3494
2197619 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2812 [1] WASHER (0.06-MM THK)  
2. 2S-2160 [1] RING-RETAINING  
3. 2V-7859 [1] BEARING  
4. 3S-2093 [1] STRAP-CABLE  
5. 6P-0593 [2] BEARING-ROLLER  
6. 105-3477 M [1] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
7. 112-2014 [1] CLAMP  
8. 112-9716 [1] LEVER  
9. 114-5309 [1] COVER AS (RH)  
10. 114-5312 [1] COVER AS (LH)  
11. 115-2014 [1] SHAFT  
12. 117-6056 [1] HOUSING AS  
13. 118-8078 [2] CLIP  
14. 123-6713 [1] WEDGE  
15. 124-0065 [1] BLOCK  
16. 155-6526 [1] SLEEVE  
17. 156-0549 Y [1] STEERING COLUMN GP  
18. 1B-8705 [1] KEY-WOODRUFF  
19. 218-0654 Y [1] STEERING WHEEL GP  
20. 4D-9517 [1] CLIP (SLOT)  
21. 6V-5683 M [4] BOLT (M6X1X16-MM)  
22. 7X-2619 M [3] BOLT (M6X1X10-MM)  
23. 8T-1159 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
24. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
26. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
27. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
28. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34940778
 

154-7443: CONTROL GP-UNPRGMED MONITOR

154-7443 CONTROL GP-UNPRGMED MONITOR -CATERPILLAR MONITORING SYSTEM
S/N AXR1-UP
PART OF 195-6255, 207-8617 WIRING GP-CAB
i01028554 SEBP3494
1547443 CONTROL GP-UNPRGMED MONITOR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 252-4501 [1] CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP34940779
 

179-8267: DOOR GP-CAB

179-8267 DOOR GP-CAB -LH
S/N AXR1-UP
PART OF 203-2507 DOOR GP-CAB
i01508946 SEBP3494
1798267 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7803 B [2] PLUG-BUTTON  
2. 6V-7636 [2] PIN AS-SPRING  
3. 225-3755 [1] GASKET  
4. 108-5471 [1] CLEVIS  
5. 109-5008 [1] BUMPER-CONICAL  
6. 170-7709 J [1] HANDLE AS-DOOR  
7. 185-7523 Y [1] WINDOW GP-CAB (SLIDING WINDOW, LH DOOR)  
8. 204-7366 [1] BRACKET AS  
9. 187-1461 [1] DOOR AS (LH)  
  205-0926 [2] HINGE  
10. 187-1466 [1] ROD  
11. 187-1469 [1] GLASS (CAB DOOR, LH)  
12. 187-1474 [1] BRACKET  
13. 252-5019 [1] LATCH AS  
14. 5C-7261 M [1] NUT (M8X1.25-THD)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
17. 3E-4316 M [1] SCREW-MACHINE (M6X1X45-MM)  
18. 9X-6155 M [3] BOLT-SOCKET HEAD (M6X1X16.7-MM)  
19. 3E-3805 E SEAL (470-CM)  
20. 6V-8185 [1] NUT (1/4-20-THD)  
21. 214-9456 [1] PLATE  
22. 242-5206 B [4] SPACER (6.4X12.5X0.76-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G II :

CONTROL GP-HANDLE
445-9510 CONTROL GP-HANDLE
CONTROL GP-HANDLE
230-9072 CONTROL GP-HANDLE
CONTROL GP-HANDLE
206-7419 CONTROL GP-HANDLE
CONTROL GP-HANDLE
206-7418 CONTROL GP-HANDLE
CONTROL GP-ELECTROHYDRAULIC
332-9285 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0209 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0208 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
218-3833 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-JOYSTICK
208-6060 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
220-6102 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
226-8664 CONTROL GP-JOYSTICK
CONTROL GP-MONITOR
103-5526 CONTROL GP-MONITOR
CONTROL GP-MONITOR
246-9199 CONTROL GP-MONITOR
CONTROL GP-MONITOR
283-1636 CONTROL GP-MONITOR
CONTROL GP-STEERING
219-7619 CONTROL GP-STEERING
CONTROL GP-UNPRGMED MONITOR
154-7443 CONTROL GP-UNPRGMED MONITOR

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.