215-5696 WIRING GP-CAB S/N CRD1-UP PART OF 215-5695 CAB AR AN ATTACHMENT 938G II WHEEL LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 215-5696 WIRING GP-
1. 234-6923 WIRING GP-
2. 253-2508 WIRING GP-
3. 206-2830 WIRING GP-
4. 258-8701 WIRING GP-
5. 201-8418 WIRING GP-
6. 190-5038 WIRING GP-
7. 201-8413 WIRING GP-
8. 201-8413 WIRING GP-
9. 217-3062 WIRING GP-
0. INFORMATION

WHEEL LOADER 938G II WHEEL LOADER CRD
938G II Wheel Loader CRD00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3498 938G II CRD (2002)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

201-8410 WIRING GP-CAB

212-7449 WIRING GP-CAB

215-5696 WIRING GP-CAB

234-6923 WIRING GP-CAB

253-2508 WIRING GP-CAB

206-2830 WIRING GP-COMMUNICATION

#SEBP34980330

215-5696: WIRING GP-CAB

WIRING GP-CAB

215-5696 WIRING GP-CAB
S/N CRD1-UP
PART OF 215-5695 CAB AR
AN ATTACHMENT

i01881879 SEBP3498

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2G-5298	[3]	WIRE AS
2.	3E-5239	[2]	RELAY AS (24-VOLT)
3.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
4.	4I-3038	[4]	WASHER (3.3X8X0.5-MM THK)
5.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
6.	6V-8369	[2]	NUT (7/16-28-THD)
7.	7K-1181	[58]	STRAP-CABLE
8.	7X-3308	[4]	BOLT-SOCKET HEAD (4-40X0.375-IN)
9.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
10.	8T-9655	[8]	MOUNT-ISOLATION
11.	9W-1441	[4]	FUSE (15-AMPERE)
12.	9W-1442	[28]	FUSE (10-AMPERE)
13.	108-3320	[1]	SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING/FLOOD/PANEL/TAIL LIGHT)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	109-2356	[13]	PLUG
15.	110-6109	[6]	KNOB-CONTROL
16.	110-7886	[1]	SWITCH AS-WIPER (24-VOLT)(FRONT INTERMITTENT)
	2H-3920	[1]	LOCKWASHER
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	6V-8369	[1]	NUT (7/16-28-THD)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
17.	110-7890	[1]	SWITCH AS-ROTARY (24-VOLT)(HEATER/AC FAN CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
18.	111-7899	[13]	GASKET
19.	112-6174	[1]	SWITCH GP-ROTARY (WIPER, WASHER)(REAR WIPER)
	2H-3920	[1]	LOCKWASHER
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	6V-8369	[1]	NUT (7/16-28-THD)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
20.	115-1748	[8]	LAMP (24-VOLT, 3-WATT)
21.	117-2311	[1]	SOCKET-AUXILIARY POWER (12-VOLT)
22.	118-7362	[1]	GROMMET-SPLIT
23.	124-5638	[1]	FILM-INFORMATION (12-VOLT)
24.	135-2601	[1]	FILM-CONTROLS (CONSOLE, RH)
25.	148-5689	[1]	GROMMET-SPLIT
26.	148-6471	[1]	PLATE AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
27.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
28.	110-7887	[1]	SWITCH AS-START (KEY)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
29.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(AUTOSHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
30.	198-6570	[1]	LIGHTER GP (12-VOLT)
31.	226-2898	[1]	HARNESS AS-CAB (MAIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2257	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	3T-0204	[1]	RECEPTACLE AS-CONNECTOR (20-PIN)
	8N-1536	[1]	NUT (1-5/8-18-THD)
	7K-1181	[2]	STRAP-CABLE
	9X-1054	[2]	PLUG AS-CONNECTOR (4-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	1U-9053	[1]	CAPSULE-LUBRICANT
	110-6844	[1]	SEAL
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	1U-9053	[1]	CAPSULE-LUBRICANT
	110-6844	[1]	SEAL
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1522	[1]	NUT (2-1/4-16-THD)
	8N-1534	[1]	RECEPTACLE AS-CONNECTOR (20-PIN)
	8N-1536	[1]	NUT (1-5/8-18-THD)
	8N-1521	[1]	BELL AS-END
	8N-1535	[2]	BELL AS-END
32.	226-2901	[1]	HARNESS AS-CAB (REAR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	3S-2093	[1]	STRAP-CABLE
	7K-1181	[1]	STRAP-CABLE
33.	226-2902	[1]	HARNESS AS-PANEL (DUCT)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
34.	205-1703	[1]	FILM-PANEL (DUCT, LH)
35.	205-1704	[1]	FILM-PANEL (DUCT, RH)
36.	205-1784	[1]	MODULE GP-DISPLAY (GAUGE CLUSTER)
37.	205-9113	[1]	PLATE
38.	206-5688	[1]	SWITCH AS-ROCKER (OPERATOR MODE SELECTOR)
	111-7899	[1]	GASKET
39.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
40.	212-3501	[1]	SWITCH AS-ROCKER (XMSN NEUTRALIZER OVERRIDE CONT)
	111-7899	[1]	GASKET
41.	099-3649 M	[4]	BOLT (M8X1.25X40-MM)
43.	142-2928	[4]	LOCKNUT (4-40-THD)
44.	156-6175	[2]	CLIP (LADDER)
46.	2H-3920	[2]	LOCKWASHER
47.	4P-7581	[2]	CLIP (LADDER)
48.	4P-8134	[5]	CLIP (LADDER)
49.	132-5789	[1]	CLIP (LADDER)
50.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
51.	6D-4246	[2]	CLIP (LOOP)
52.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(AIR CONDITIONER)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
53.	6V-5645	[4]	SCREW-MACHINE (10-32X0.87-IN)
54.	6V-8225 M	[2]	NUT (M6X1-THD)
55.	6V-8837 M	[2]	BOLT (M6X1X16-MM)
56.	6V-9673 M	[4]	SCREW-MACHINE (M5X0.8X12-MM)
57.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
58.	8T-4133 M	[2]	NUT (M10X1.5-THD)
59.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
60.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
61.	8T-4189 M	[6]	BOLT (M8X1.25X20-MM)
62.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
63.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
64.	8T-4224	[7]	WASHER-HARD (8.8X16X2-MM THK)
65.	8T-4908 M	[1]	BOLT (M8X1.25X25-MM)
66.	174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
67.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
68.	9X-8486	[2]	SCREW-MACHINE (8-32X0.75-IN)
69.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	2V-3726 F	[1]	BUMPER
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34980331

234-6923: WIRING GP-CAB

WIRING GP-CAB

234-6923 WIRING GP-CAB
S/N CRD1-UP
PART OF 230-1258, 250-2194 CAB AR
ALSO AN ATTACHMENT

i01946237 SEBP3498

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2G-5298	[3]	WIRE AS
2.	3E-5239	[2]	RELAY AS (24-VOLT)
3.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
4.	4I-3038	[4]	WASHER (3.3X8X0.5-MM THK)
5.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
6.	6V-8369	[2]	NUT (7/16-28-THD)
7.	7K-1181	[57]	STRAP-CABLE
8.	7X-3308	[4]	BOLT-SOCKET HEAD (4-40X0.375-IN)
9.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
10.	8T-9655	[8]	MOUNT-ISOLATION
11.	9W-1441	[4]	FUSE (15-AMPERE)
12.	9W-1442	[28]	FUSE (10-AMPERE)
13.	108-3320	[1]	SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING/FLOOD/PANEL/TAIL LIGHT)
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
14.	109-2356	[13]	PLUG
15.	110-6109	[6]	KNOB-CONTROL (PANEL ROTARY SWITCHES)
16.	110-7886	[1]	SWITCH AS-WIPER (24-VOLT)(FRONT INTERMTTENT)
	2H-3920	[1]	LOCKWASHER
	6V-8369	[1]	NUT (7/16-28-THD)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
17.	110-7887	[1]	SWITCH AS-START (KEY)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
18.	111-7899	[13]	GASKET
19.	112-6174	[1]	SWITCH GP-ROTARY (WIPER, WASHER)(REAR WIPER)
	2H-3920	[1]	LOCKWASHER
	6V-8369	[1]	NUT (7/16-28-THD)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
20.	115-1748	[7]	LAMP (24-VOLT, 3-WATT)
21.	117-2311	[1]	SOCKET-AUXILIARY POWER (12-VOLT)
22.	118-7362	[1]	GROMMET-SPLIT
23.	124-5638	[1]	FILM-INFORMATION (12-VOLT)
24.	148-5689	[1]	GROMMET-SPLIT
25.	148-6471	[1]	PLATE AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
26.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
27.	174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
28.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(AUTOSHIFT CONTROL)
28A.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL)
			(EACH INCLUDES)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
29.	198-6570	[1]	LIGHTER GP (12-VOLT)
	198-6571	[1]	ELEMENT AS-HEATER (12-VOLT)
30.	205-1703	[1]	FILM-PANEL (DUCT, LH)
31.	205-1704	[1]	FILM-PANEL (DUCT, RH)
32.	205-1784	[1]	MODULE GP-DISPLAY (GAUGE CLUSTER)
33.	205-9113	[1]	PLATE
34.	206-5688	[1]	SWITCH AS-ROCKER (MODE SELECT)
	111-7899	[1]	GASKET
35.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
36.	212-3501	[1]	SWITCH AS-ROCKER (XMSN NEUTRALIZER OVERRIDE CONT)
	111-7899	[1]	GASKET
37.	226-2902	[1]	HARNESS AS-PANEL (DUCT)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[8]	PLUG-SEAL
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
38.	234-6925	[1]	HARNESS AS-CAB (REAR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[13]	PLUG-SEAL
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
39.	236-4233	[1]	SWITCH AS-ROCKER (AIR CONDITIONER, HEATER CONT)
	111-7899	[1]	GASKET
40.	236-4234	[1]	SWITCH AS-ROCKER (BLOWER FAN SPEED)
	111-7899	[1]	GASKET
41.	252-4575	[1]	FILM-IDENTIFICATION (CONSOLE, RH)
42.	307-3118	[1]	HARNESS AS-CAB
43.	099-3649 M	[4]	BOLT (M8X1.25X40-MM)
44.	130-5300	[2]	CLIP
45.	132-5789	[2]	CLIP (LADDER)
46.	142-2928	[4]	LOCKNUT (4-40-THD)
47.	156-6175	[2]	CLIP (LADDER)
48.	2H-3920	[2]	LOCKWASHER
49.	4P-7581	[1]	CLIP (LADDER)
50.	4P-8134	[5]	CLIP (LADDER)
51.	4S-4455	[1]	CLIP
52.	6D-4246	[2]	CLIP (LOOP)
53.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(AIR CONDITIONER)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
54.	6V-5645	[4]	SCREW-MACHINE (10-32X0.87-IN)
55.	6V-8225 M	[2]	NUT (M6X1-THD)
56.	6V-8837 M	[2]	BOLT (M6X1X16-MM)
57.	6V-9673 M	[4]	SCREW-MACHINE (M5X0.8X12-MM)
58.	8T-4121	[9]	WASHER-HARD (11X21X2.5-MM THK)
59.	8T-4133 M	[2]	NUT (M10X1.5-THD)
60.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
61.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
62.	8T-4189 M	[6]	BOLT (M8X1.25X20-MM)
63.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
64.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
65.	8T-4224	[6]	WASHER-HARD (8.8X16X2-MM THK)
66.	9K-1120	[1]	GROMMET
67.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
68.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
69.	9X-8486	[2]	SCREW-MACHINE (8-32X0.75-IN)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34980332

253-2508: WIRING GP-CAB

WIRING GP-CAB

253-2508 WIRING GP-CAB
S/N CRD1400-UP
PART OF 250-3055 CANOPY AR-OPEN ROPS
AN ATTACHMENT

i02225543 SEBP3498

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2G-5298	[3]	WIRE AS
2.	3E-5239	[2]	RELAY AS (24-VOLT)(FLOODLIGHTS)
3.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
4.	4I-3038	[4]	WASHER (3.3X8X0.5-MM THK)
5.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
6.	6V-8369	[2]	NUT (7/16-28-THD)
7.	7K-1181	[48]	STRAP-CABLE
8.	7X-3308	[4]	BOLT-SOCKET HEAD (4-40X0.375-IN)
9.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
10.	8T-8737	[28]	PLUG-SEAL
11.	8T-9655	[8]	MOUNT-ISOLATION
12.	9W-1441	[4]	FUSE (15-AMPERE)
13.	9W-1442	[28]	FUSE (10-AMPERE)
14.	108-3320	[1]	SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING,FLOOD,PANEL,TAIL LIGHT)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
15.	109-2356	[13]	PLUG
16.	110-6109	[3]	KNOB-CONTROL (PANEL ROTARY SWITCHES)
17.	110-7887	[1]	SWITCH AS-START (KEY)
	7T-6799	[1]	NUT-MOUNTING (1-32-THD)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
18.	111-7899	[13]	GASKET
19.	115-1748	[4]	LAMP (24-VOLT, 3-WATT)
20.	117-2311	[1]	SOCKET-AUXILIARY POWER (12-VOLT)
21.	118-7362	[1]	GROMMET-SPLIT
22.	124-5638	[1]	FILM-INFORMATION (12-VOLT)
24.	148-5689	[1]	GROMMET-SPLIT
25.	148-6471	[1]	PLATE AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
26.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
27.	174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
28.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(AUTOSHIFT CONTROL)
28A.	185-6335	[1]	SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL)
			(EACH SWITCH AS INCLUDES)
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
29.	198-6570	[1]	LIGHTER GP (12-VOLT)
30.	205-1703	[1]	FILM-PANEL (DUCT, LH)
31.	205-1784	[1]	MODULE GP-DISPLAY (GAUGE CLUSTER)
32.	205-9113	[1]	PLATE
33.	206-5688	[1]	SWITCH AS-ROCKER (MODE SELECT)
	111-7899	[1]	GASKET
34.	207-2530	[1]	FILM-PANEL
35.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
36.	212-3501	[1]	SWITCH AS-ROCKER (XMSN NEUTRALIZER OVERRIDE CONT)
	111-7899	[1]	GASKET
37.	226-2902	[1]	HARNESS AS-PANEL (DUCT)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[3]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[3]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
38.	261-5545	[1]	HARNESS AS-CAB (MAIN)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[5]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	1U-9053	[1]	CAPSULE-LUBRICANT
	110-6844	[1]	SEAL
	3T-0204	[1]	RECEPTACLE AS-CONNECTOR (20-PIN)
	8N-1536	[1]	NUT (1-5/8-18-THD)
	7K-1181	[2]	STRAP-CABLE
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1522	[1]	NUT (2-1/4-16-THD)
	8N-1521	[1]	BELL AS-END
	8N-1534	[1]	RECEPTACLE AS-CONNECTOR (20-PIN)
	8N-1536	[1]	NUT (1-5/8-18-THD)
	8N-1535	[2]	BELL AS-END
	9X-1054	[2]	PLUG AS-CONNECTOR (4-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	1U-9053	[1]	CAPSULE-LUBRICANT
	110-6844	[1]	SEAL
	155-2255	[7]	KIT-CONNECTING PLUG (12-PIN)
	155-2256	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2257	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[5]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	188-6253	[1]	BLOCK GP-JUNCTION
	1H-3244	[2]	LOCKWASHER
	6V-8185	[2]	NUT (1/4-20-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	151-1398	[3]	KIT-TERMINAL (LOCK)
	200-8789	[1]	SEAL
39.	262-0919	[1]	HARNESS AS-CAB (REAR)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[8]	PLUG-SEAL
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS & WEDGE)
40.	099-3649 M	[4]	BOLT (M8X1.25X40-MM)
41.	132-5789	[1]	CLIP (LADDER)
42.	142-2928	[4]	LOCKNUT (4-40-THD)
43.	156-6175	[2]	CLIP (LADDER)
44.	2H-3920	[2]	LOCKWASHER
45.	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
46.	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
47.	4P-7581	[2]	CLIP (LADDER)
48.	4P-8134	[5]	CLIP (LADDER)
49.	6D-4246	[2]	CLIP (LOOP)
50.	6V-5645	[4]	SCREW-MACHINE (10-32X0.87-IN)
51.	6V-8225 M	[2]	NUT (M6X1-THD)
52.	6V-8837 M	[2]	BOLT (M6X1X16-MM)
53.	6V-9673 M	[4]	SCREW-MACHINE (M5X0.8X12-MM)
54.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
55.	8T-4133 M	[2]	NUT (M10X1.5-THD)
56.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
57.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
58.	8T-4189 M	[6]	BOLT (M8X1.25X20-MM)
59.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
60.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
61.	8T-4224	[7]	WASHER-HARD (8.8X16X2-MM THK)
62.	8T-4908 M	[1]	BOLT (M8X1.25X25-MM)
63.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
64.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34980333

206-2830: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

206-2830 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N CRD1-UP
PART OF 206-2817 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i01683525 SEBP3498

2062830 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[2]	STRAP-CABLE
2.	144-4613	[1]	ANGLE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
3.	215-9550	[1]	HARNESS AS-CONTROL (PRODUCT LINK)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
4.	4D-7794	[3]	CLIP
5.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4133 M	[1]	NUT (M10X1.5-THD)
7.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
8.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
	M		METRIC PART

#SEBP34980334

258-8701: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

258-8701 WIRING GP-COMMUNICATION
S/N CRD1-UP
PART OF 256-0337 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i02351141 SEBP3498

2588701 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[5]	STRAP-CABLE
2.	268-5864	[1]	HARNESS AS-CONTROL
3.	125-8797	[1]	CLIP (SLOT)

#SEBP34980335

201-8418: WIRING GP-ELECTRIC CLUTCH

WIRING GP-ELECTRIC CLUTCH

201-8418 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N CRD1-UP
PART OF 201-8906 COOLER AR-AXLE OIL
AN ATTACHMENT

i01681141 SEBP3498

2018418 WIRING GP-ELECTRIC CLUTCH Parts scheme

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	155-8998	[1]	SWITCH AS-TEMPERATURE (AXLE OIL MONITORING)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	130-5301	[1]	CLIP
4.	202-3249	[1]	HARNESS AS-PUMP (AXLE OIL COOLER PUMP CLUTCH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
5.	156-6175	[1]	CLIP (LADDER)
6.	5P-9085	[1]	CLIP (LOOP)

#SEBP34980336

190-5038: WIRING GP-ENGINE

WIRING GP-ENGINE

190-5038 WIRING GP-ENGINE
S/N 5GG1-UP
HIGH SIDE ACTIVATION OF STARTING AID HEATER RELAY
PART OF 198-5914, 283-1633, 298-6581 ENGINE AR-COMPLETE

i01420754 SEBP3498

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	105-1797	[6]	MOUNT
3.	153-8920	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	6N-7523	[1]	WASHER (6.48X11.9X1.57-MM THK)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	135-5975	[1]	GROMMET-WIRING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
4.	156-6175	[2]	CLIP (LADDER)
5.	195-7336 Y	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
6.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
7.	113-8690	[1]	WASHER (11.1X37.9X3.3-MM THK)
8.	7X-7729	[1]	WASHER (11X25X3-MM THK)
9.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
10.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
11.	156-9890	[1]	WASHER (9X30X4-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34980337

201-8413: WIRING GP-ENGINE

WIRING GP-ENGINE

201-8413 WIRING GP-ENGINE
S/N CRD1-511
PART OF 199-2817 ELECTRICAL AR

i01673483 SEBP3498

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	5D-2651	[1]	CLIP
3.	7K-1181	[7]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
5.	174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
6.	202-3244	[1]	HARNESS AS-ENGINE
	8T-8827	[1]	BOOT (RED)
	9W-1795	[1]	BOOT
	135-2543	[1]	BOOT (RED)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	126-1774	[1]	COVER-CONNECTOR
	9X-6856	[20]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	3T-0203	[1]	PLUG AS-CONNECTOR (20-PIN)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
	8T-8737	[45]	PLUG-SEAL
	7G-7917	[5]	PLUG-SEAL
	7G-7918	[4]	PLUG-SEAL
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8N-1545	[1]	SOCKET-CONNECTOR (8-GA)
	9X-6857	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8N-1543	[2]	SOCKET-CONNECTOR (10-GA)
	8N-1549	[2]	SOCKET-CONNECTOR (4-GA)
	8T-8730	[38]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[2]	STRAP-CABLE
	7K-1181	[1]	STRAP-CABLE
	9X-6772	[2]	STRAP-CABLE
	1P-0810 B		TAPE-ELECTRICAL
	2L-8049	[1]	TERMINAL-RING (6-GA, NO. 10 SCREW)
			-OR-
	2L-8057	[1]	TERMINAL-RING (8-GA, NO. 10 SCREW)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	9G-4344	[3]	TERMINAL-RING (4-GA, 1/2-IN SCREW)
	2L-8054	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
			-OR-
	2L-8061	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	176-9299	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGES)
7.	215-3860	[1]	BRACKET AS
8.	235-2426	[1]	HARNESS AS-WIRING (TEMPERATURE RESISTOR)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	114-8843 E		SLEEVE-PLASTIC (60-CM)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
9.	102-2240 Y	[1]	SENSOR GP-TEMPERATURE (3-PIN)(HYDRAULIC OIL)
10.	118-6878	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
11.	130-5300	[3]	CLIP
12.	131-0427 Y	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
13.	147-0856	[1]	RESISTOR AS
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-6885 E		TUBE-HEAT SHRINK (19.05-MM DIA)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	156-6175	[2]	CLIP (LADDER)
15.	195-0882	[1]	BRACKET AS
16.	1K-3113	[1]	SPACER (0.546X0.840X3.875-IN THK)
17.	1S-1015	[2]	CLIP
18.	3J-1907	[1]	SEAL-O-RING
19.	3K-0360	[1]	SEAL-O-RING
20.	4D-9517	[1]	CLIP
21.	5C-7261 M	[4]	NUT (M8X1.25-THD)
22.	5P-4116	[7]	WASHER-HARD (8.8X20.5X2-MM THK)
23.	5P-9297	[1]	CLIP (LOOP)
24.	6D-4244	[1]	CLIP (LOOP)
25.	6D-4246	[5]	CLIP (LOOP)
26.	6D-4636	[1]	CLIP (LOOP)
27.	6V-8225 M	[2]	NUT (M6X1-THD)
28.	7X-2552 M	[1]	BOLT (M16X2X30-MM)
29.	7X-7729	[1]	WASHER (11X25X3-MM THK)
30.	8M-2773	[1]	CLIP (LOOP)
31.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
32.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
33.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
34.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
35.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
37.	9X-7345	[1]	GROMMET
38.	9X-8250	[2]	CLIP
39.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
40.	9X-8257	[1]	WASHER (17.5X30X3.5-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34980338

201-8413: WIRING GP-ENGINE

WIRING GP-ENGINE

201-8413 WIRING GP-ENGINE
S/N CRD512-UP
PART OF 199-2817 ELECTRICAL AR

i01985999 SEBP3498

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	5D-2651	[1]	CLIP
3.	7K-1181	[7]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
5.	102-2240 Y	[1]	SENSOR GP-TEMPERATURE (3-PIN)(HYDRAULIC OIL)
6.	174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
7.	212-3413	[1]	BRACKET AS
8.	215-3860	[1]	BRACKET AS
9.	228-4982	[1]	RESISTOR AS
10.	118-6878	[1]	BRACKET AS
11.	130-5300	[3]	CLIP
12.	131-0427 Y	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
13.	147-0856	[1]	RESISTOR AS
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-6885 E		TUBE-HEAT SHRINK (19.05-MM DIA)(5-CM)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	156-6175	[2]	CLIP (LADDER)
15.	189-3158	[1]	SUPPRESSOR-ARC
16.	1K-3113	[1]	SPACER (0.546X0.840X3.875-IN THK)
17.	1S-1015	[2]	CLIP
18.	278-0466	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	110-6845	[1]	PLUG AS-CONNECTOR (40-PIN)
	3S-2093	[4]	STRAP-CABLE
	3T-0203	[1]	PLUG AS-CONNECTOR (20-PIN)
	7K-1181	[1]	STRAP-CABLE
	8N-1535	[1]	BELL AS-END
	9X-6772	[1]	STRAP-CABLE
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
19.	3J-1907	[1]	SEAL-O-RING
20.	3K-0360	[1]	SEAL-O-RING
21.	3V-4791	[1]	GROMMET
22.	4D-9517	[1]	CLIP
23.	5C-7261 M	[4]	NUT (M8X1.25-THD)
24.	5P-4116	[7]	WASHER-HARD (8.8X20.5X2-MM THK)
25.	5P-9297	[1]	CLIP (LOOP)
26.	6D-4244	[1]	CLIP (LOOP)
27.	6D-4246	[5]	CLIP (LOOP)
28.	6D-4636	[1]	CLIP (LOOP)
29.	6V-8225 M	[2]	NUT (M6X1-THD)
30.	7X-2552 M	[1]	BOLT (M16X2X30-MM)
31.	7X-7729	[1]	WASHER (11X25X3-MM THK)
32.	8M-2773	[1]	CLIP (LOOP)
33.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
34.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
35.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
36.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
37.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
38.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
39.	9X-8250	[2]	CLIP
40.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
41.	9X-8257	[1]	WASHER (17.5X30X3.5-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34980339

217-3062: WIRING GP-ENGINE

WIRING GP-ENGINE

217-3062 WIRING GP-ENGINE -70-AMPERE ALTERNATOR
S/N CRD1-511
PART OF 206-7345 ALTERNATOR AR-CHARGING
AN ATTACHMENT

i01680008 SEBP3498

For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[5]	STRAP-CABLE
3.	9X-3495	[1]	CLIP AS
4.	174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
5.	215-3860	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
6.	217-3064	[1]	HARNESS AS-ENGINE (70-AMPERE ALTERNATOR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	3T-0203	[1]	PLUG AS-CONNECTOR (20-PIN)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	8T-8737	[45]	PLUG-SEAL
	7G-7917	[5]	PLUG-SEAL
	7G-7918	[4]	PLUG-SEAL
	9X-6772	[4]	STRAP-CABLE
	3S-2093	[1]	STRAP-CABLE
7.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(HYDRAULIC OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
8.	118-6878	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
9.	130-5300	[3]	CLIP
10.	131-0427 Y	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
11.	156-6175	[2]	CLIP (LADDER)
12.	195-0882	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
13.	1K-3113	[1]	SPACER (0.546X0.840X3.875-IN THK)
14.	5D-2651	[1]	CLIP
15.	1S-1015	[2]	CLIP
16.	6D-4636	[1]	CLIP (LOOP)
17.	3J-1907	[1]	SEAL-O-RING
18.	3K-0360	[1]	SEAL-O-RING
19.	4D-9517	[1]	CLIP
20.	5C-7261 M	[2]	NUT (M8X1.25-THD)
21.	5P-4116	[5]	WASHER-HARD (8.8X20.5X2-MM THK)
22.	5P-9297	[1]	CLIP (LOOP)
23.	6D-4244	[1]	CLIP (LOOP)
24.	6D-4246	[5]	CLIP (LOOP)
25.	6V-8225 M	[2]	NUT (M6X1-THD)
26.	7X-7729	[1]	WASHER (11X25X3-MM THK)
27.	8M-2773	[1]	CLIP (LOOP)
28.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
29.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
30.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
31.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
32.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
33.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
34.	9X-7345	[1]	GROMMET
35.	9X-8250	[2]	CLIP
36.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
37.	9X-8257	[1]	WASHER (17.5X30X3.5-MM THK)
38.	7X-2552 M	[1]	BOLT (M16X2X30-MM)
39.	8T-4133 M	[1]	NUT (M10X1.5-THD)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Specifications

Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Testing and Adjusting

Electric Starting System - Test
3126B Engines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engine for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3126B Engine for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines

How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines

CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Air Inlet Heater Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Shutdown Switch Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Air Inlet Heater Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Wiring Information
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21