AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

265-6529 WIRING GP-ENGINE S/N SLE4500-UP PART OF 271-0945 INSTALLATION AR-ENGINE AN ATTACHMENT TH355B


ELECTRICAL AND STARTING SYSTEM
WIRING GP

TELEHANDLER TH355B TELEHANDLER JRK
 TH355B TH360B Telehandler JRK00001-UP (MACHINE) POWERED BY 3054E Engine SEBP3507 TH355B JRK   (2003)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ENGINE
206-7181 WIRING GP-ENGINE
WIRING GP-ENGINE
206-7181 WIRING GP-ENGINE
WIRING GP-ENGINE
265-6529 WIRING GP-ENGINE
WIRING GP-LEVELING
200-2903 WIRING GP-LEVELING
WIRING GP-LEVELING
261-2703 WIRING GP-LEVELING
WIRING GP-MACHINE
227-1135 WIRING GP-MACHINE
 

#SEBP35070270
 

265-6529: WIRING GP-ENGINE

265-6529 WIRING GP-ENGINE
S/N SLE4500-UP
PART OF 271-0945 INSTALLATION AR-ENGINE
AN ATTACHMENT
i02377780 SEBP3507
2656529 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-2228 [2] BUSHING-TERMINAL  
2. 7K-1181 [2] STRAP-CABLE  
3. 8T-8737 B [4] PLUG-SEAL  
4. 115-1615 [3] RELAY AS (12-VOLT)  
5. 135-2543 [4] BOOT (RED)  
6. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  253-2111 [2] LOCKWASHER  
7. 228-0651 [1] CABLE AS  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  8C-3056 E CABLE (2-GA, RED)(66-CM)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8Y-8081 E TUBE-CONVOLUTED (66-CM)  
  135-2543 [1] BOOT (RED)  
8. 229-1416 [1] BAR  
9. 232-7405 [1] BRACKET  
10. 263-9557 [1] HARNESS AS-ENGINE  
  3L-6513 [1] TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  9X-1054 [3] PLUG AS-CONNECTOR (4-PIN)  
  9X-1055 [5] TERMINAL-RECEPTACLE (12-GA)  
  9X-1056 [2] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  100-5041 [5] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  100-6674 [1] SEAL-CONNECTOR  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  7N-9017 [2] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  8C-3056 E CABLE (2-GA, RED)(150-CM)  
  9X-1054 [3] PLUG AS-CONNECTOR (4-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  167-3692 [1] RECEPTACLE AS-CONNECTOR (31-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  225-4950 [1] HOLDER AS-FUSE  
  232-6312 [1] FUSE (20-AMPERE)  
11. 137-6722 [2] CLIP  
12. 189-0108 [1] PLATE (MAIN)  
13. 216-4970 [1] CIRCUIT BREAKER AS (120-AMPERE)  
14. 217-7318 [1] PLATE (STARTER)  
15. 3B-4502 [8] LOCKWASHER  
16. 102-8804 B [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
17. 3S-2093 [2] STRAP-CABLE  
18. 5C-2874 M [2] NUT (M5X0.8-THD)  
19. 5C-2890 M [1] NUT (M6X1-THD)  
20. 044-3994 [4] SCREW  
22. 5W-8683 [1] WASHER (6.4X11X0.5-MM THK)  
23. 6V-4298 M [2] BOLT (M5X0.8X16-MM)  
24. 8T-4171 M [3] BOLT (M6X1X12-MM)  
25. 8T-4193 M [2] BOLT (M16X2X50-MM)  
26. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP35070271
 

200-2903: WIRING GP-LEVELING

200-2903 WIRING GP-LEVELING -FRAME
S/N SLE4500-UP; JRK1-UP
PART OF 212-1015 LEVELING AR-FRAME
ALSO AN ATTACHMENT
i01648972 SEBP3507
2002903 WIRING GP-LEVELING Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-9378 [1] RELAY AS (12-VOLT)(FRAME LEVEL)  
2. 190-8219 [1] SWITCH AS (FRAME LEVEL)  
  111-7899 [1] GASKET  
 

#SEBP35070272
 

261-2703: WIRING GP-LEVELING

261-2703 WIRING GP-LEVELING -FRAME
S/N SLE3724-4499
PART OF 265-9419 CONFIGURATION AR
AN ATTACHMENT
i02303990 SEBP3507
2612703 WIRING GP-LEVELING Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [9] STRAP-CABLE  
2. 259-3013 [1] HARNESS AS-SOLENOID  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8I-3641 [2] SLEEVE (BLUE)  
  106-8704 [4] SUPPRESSOR AS-ARC  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS WEDGE & INTERFACE SEAL)
3. 3S-2093 [10] STRAP-CABLE  
 

#SEBP35070273
 

227-1135: WIRING GP-MACHINE

227-1135 WIRING GP-MACHINE
S/N SLE1-UP; JRK1-UP
PART OF 209-3512, 237-0088 COMMON AR
i01809424 SEBP3507
2271135 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [3] STRAP-CABLE  
2. 7K-1181 [4] STRAP-CABLE  
3. 8T-8737 B [8] PLUG-SEAL  
4. 206-1345 [1] STRAP-CABLE  
5. 102-8802 B [1] KIT-RECEPTACLE (2-PIN)  
6. 102-8805 B [1] KIT-RECEPTACLE (6-PIN)  
7. 9X-6932 [2] BOOT-TERMINAL  
  B   USE AS REQUIRED
 

#SEBP35070274
 

210-1310: WIRING GP-PLATFORM

210-1310 WIRING GP-PLATFORM -FIXED
S/N SLE1-UP
PART OF 212-0731 PLATFORM AR-ACCESS
AN ATTACHMENT
i01888751 SEBP3507
2101310 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
2. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
3. 8T-9655 [8] MOUNT-ISOLATION  
4. 243-6361 [1] ALARM GP (ACTION)  
5. 202-2277 [1] SWITCH AS-ROCKER (PLATFORM SELECT)  
  111-7899 [1] GASKET  
6. 202-2278 [1] SWITCH AS-ROCKER (ENGINE START)  
  111-7899 [1] GASKET  
7. 213-2581 [2] COVER  
8. 213-5091 Y [1] SWITCH GP-PUSH BUTTON (ENGINE STOP)  
9. 213-5093 Y [1] SWITCH GP-PEDAL (PLATFORM CONTROLS)  
10. 231-2617 [1] HARNESS AS-PLATFORM (PLATFORM)  
  180-0050 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11. 231-5382 [1] PLATE  
12. 231-5383 [1] PLATE  
13. 232-3811 Y [2] CONTROL GP-HANDLE (ACCESS PLATFORM)  
14. 232-7328 [1] BRACKET  
15. 233-7379 [1] PLATE  
16. 124-0312 [8] SCREW-PAN HEAD (8-16X0.32-IN)  
17. 167-3593 [1] STRAP  
18. 212-9870 [1] LAMP AS (12-VOLT)  
  111-7899 [1] GASKET  
19. 3C-6969 M [5] NUT (M3X0.5-THD)  
20. 3S-2093 [9] STRAP-CABLE  
21. 5C-2890 M [19] NUT (M6X1-THD)  
22. 5C-7261 M [8] NUT (M8X1.25-THD)  
23. 6V-9189 M [4] LOCKNUT (M8X1.25-THD)  
24. 6V-9671 M [5] SCREW-MACHINE (M3X0.5X12-MM)  
25. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
26. 8T-3991 M [14] SCREW-BUTTON HEAD (M6X1X20-MM)  
27. 8T-4138 M [5] BOLT (M6X1X20-MM)  
28. 8T-4205 [24] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 8T-4224 [12] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
31. 9B-1117 [5] LOCKWASHER  
32. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
33. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35070275
 

210-1311: WIRING GP-PLATFORM

210-1311 WIRING GP-PLATFORM -SWIVEL
S/N SLE1-UP
PART OF 233-0268 PLATFORM GP-ACCESS
Type 1
AN ATTACHMENT
i01888803 SEBP3507
2101311 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 243-6361 [1] ALARM GP (ACTION)  
2. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
3. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
4. 8T-8737 [6] PLUG-SEAL  
5. 8T-9655 [8] MOUNT-ISOLATION  
6. 167-3593 [1] STRAP  
7. 202-2277 [1] SWITCH AS-ROCKER (PLATFORM SELECT)  
  111-7899 [1] GASKET  
8. 202-2278 [1] SWITCH AS-ROCKER (ENGINE START)  
  111-7899 [1] GASKET  
9. 213-2581 [3] COVER  
10. 213-5091 Y [1] SWITCH GP-PUSH BUTTON (ENGINE STOP)  
11. 213-5093 Y [1] SWITCH GP-PEDAL (PLATFORM CONTROLS)  
12. 230-7184 [1] PLATE  
13. 230-7185 [1] PLATE  
14. 230-7186 [1] PLATE  
15. 231-2618 [1] HARNESS AS-PLATFORM (PLATFORM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  180-0050 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS & WEDGES)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16. 232-3811 CY [3] CONTROL GP-HANDLE (ACCESS PLATFORM)  
17. 232-7328 [1] BRACKET  
18. 124-0312 [12] SCREW-PAN HEAD (8-16X0.32-IN)  
19. 212-9870 [1] LAMP AS (12-VOLT)  
  111-7899 [1] GASKET  
20. 3C-6969 M [5] NUT (M3X0.5-THD)  
21. 3D-6209 [1] GROMMET  
22. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
23. 3S-2093 [10] STRAP-CABLE  
24. 5C-2890 M [21] NUT (M6X1-THD)  
25. 5C-7261 M [8] NUT (M8X1.25-THD)  
26. 6V-9189 M [4] LOCKNUT (M8X1.25-THD)  
27. 6V-9671 M [5] SCREW-MACHINE (M3X0.5X12-MM)  
28. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
29. 8T-3991 M [16] SCREW-BUTTON HEAD (M6X1X20-MM)  
30. 8T-4138 M [5] BOLT (M6X1X20-MM)  
31. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
32. 8T-4205 [26] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 8T-4224 [12] WASHER-HARD (8.8X16X2-MM THK)  
34. 9B-1117 [5] LOCKWASHER  
35. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
36. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35070276
 

210-1311: WIRING GP-PLATFORM

210-1311 WIRING GP-PLATFORM -SWIVEL
S/N SLE1-UP
PART OF 268-8776 PLATFORM GP-OPERATOR
Type 2
AN ATTACHMENT
i02394139 SEBP3507
2101311 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 243-6361 [1] ALARM GP (ACTION)  
2. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
3. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
5. 8T-9655 [8] MOUNT-ISOLATION  
6. 273-0187 C [1] STRAP  
7. 202-2277 [1] SWITCH AS-ROCKER (PLATFORM SELECT)  
  111-7899 [1] GASKET  
8. 202-2278 [1] SWITCH AS-ROCKER (ENGINE START)  
  111-7899 [1] GASKET  
9. 213-2581 [3] COVER  
10. 213-5091 Y [1] SWITCH GP-PUSH BUTTON (ENGINE STOP)  
11. 213-5093 Y [1] SWITCH GP-PEDAL (PLATFORM CONTROLS)  
12. 270-9115 C [1] PLATE AS  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  7T-1099 [5] LINK  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
13. 230-7185 [1] PLATE  
14. 230-7186 [1] PLATE  
15. 268-8777 C [1] HARNESS AS-PLATFORM  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  174-0681 [1] PLUG AS  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16. 232-3811 Y [3] CONTROL GP-HANDLE (ACCESS PLATFORM)  
17. 270-2014 C [1] ENCLOSURE AS  
18. 124-0312 [12] SCREW-PAN HEAD (8-16X0.32-IN)  
19. 212-9870 [1] LAMP AS (12-VOLT)  
  111-7899 [1] GASKET  
20. 3C-6969 M [5] NUT (M3X0.5-THD)  
22. 5C-9553 CM [8] BOLT (M6X1X16-MM)  
23. 3S-2093 C [13] STRAP-CABLE  
24. 5C-2890 CM [7] NUT (M6X1-THD)  
25. 5C-7261 CM [4] NUT (M8X1.25-THD)  
26. 268-1050 C [1] COVER  
27. 120-0091 CM [5] BOLT (M3X0.5X10-MM)  
28. 099-3649 CM [4] BOLT (M8X1.25X40-MM)  
29. 9X-8256 C [14] WASHER (6.6X12X2-MM THK)  
30. 8T-4138 CM [7] BOLT (M6X1X20-MM)  
31. 8T-4200 CM [4] BOLT (M8X1.25X16-MM)  
32. 8T-4205 C [8] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 8T-4224 C [4] WASHER-HARD (8.8X16X2-MM THK)  
34. 9B-1117 [5] LOCKWASHER  
35. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35070277
 

213-4663: WIRING GP-PLATFORM

213-4663 WIRING GP-PLATFORM -BOOM
S/N SLE1-UP; JRK1-UP
PART OF 228-8933, 272-1509 CONVERSION AR-ACCESS PLATFORM, 257-0624 PLATFORM AR, 222-0313 STABILIZER AR, 223-8988 WIRING GP-ACCESS PLATFORM
AN ATTACHMENT
i01654248 SEBP3507
2134663 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-4982 M [2] BOLT-SOCKET HEAD (M4X0.7X20-MM)  
2. 165-6854 [1] PLATE  
3. 211-4658 [1] HARNESS AS-SENSOR (BOOM)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 247-4818 [1] SENSOR AS-POSITION (BOOM)  
5. 221-8445 [1] PLATE  
6. 3S-2093 [12] STRAP-CABLE  
7. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
8. 5C-8312 M [2] NUT (M4X0.7-THD)  
9. 8T-4171 M [4] BOLT (M6X1X12-MM)  
10. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP35070278
 

234-9516: WIRING GP-PLATFORM

234-9516 WIRING GP-PLATFORM -SWIVEL
S/N SLE1-UP
PART OF 234-9515 PLATFORM GP-ACCESS
Type 1
AN ATTACHMENT
i02113641 SEBP3507
2349516 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 243-6361 [1] ALARM GP (ACTION)  
2. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
3. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
4. 8T-9655 [8] MOUNT-ISOLATION  
5. 167-3593 [1] STRAP  
6. 202-2277 [1] SWITCH AS-ROCKER (PLATFORM SELECT)  
  111-7899 [1] GASKET  
7. 202-2278 [1] SWITCH AS-ROCKER (ENGINE START)  
  111-7899 [1] GASKET  
8. 213-2581 [3] COVER  
9. 213-5091 Y [1] SWITCH GP-PUSH BUTTON  
10. 213-5093 Y [1] SWITCH GP-PEDAL (PLATFORM CONTROLS)  
11. 230-7184 [1] PLATE  
12. 230-7185 [1] PLATE  
13. 230-7186 [1] PLATE  
14. 231-2618 [1] HARNESS AS-PLATFORM (PLATFORM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
15. 232-3811 Y [3] CONTROL GP-HANDLE (ACCESS PLATFORM)  
16. 232-7328 [1] BRACKET  
17. 124-0312 [12] SCREW-PAN HEAD (8-16X0.32-IN)  
18. 212-9870 [1] LAMP AS (12-VOLT)  
  111-7899 [1] GASKET  
19. 235-4398 [1] MODULE GP-DISPLAY (LOAD INDICATOR)  
20. 3C-6969 M [5] NUT (M3X0.5-THD)  
21. 3D-6209 [1] GROMMET  
22. 3S-2093 [11] STRAP-CABLE  
23. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
24. 5C-2890 M [21] NUT (M6X1-THD)  
25. 5C-7261 M [8] NUT (M8X1.25-THD)  
26. 5C-8312 M [4] NUT (M4X0.7-THD)  
27. 6V-9189 M [4] LOCKNUT (M8X1.25-THD)  
28. 6V-9671 M [5] SCREW-MACHINE (M3X0.5X12-MM)  
29. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
30. 8T-3991 M [16] SCREW-BUTTON HEAD (M6X1X20-MM)  
31. 8T-3998 M [4] BOLT (M4X0.7X12-MM)  
32. 8T-4138 M [5] BOLT (M6X1X20-MM)  
33. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
34. 8T-4205 [26] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 8T-4224 [12] WASHER-HARD (8.8X16X2-MM THK)  
36. 9B-1117 [5] LOCKWASHER  
37. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
38. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35070279
 

234-9516: WIRING GP-PLATFORM

234-9516 WIRING GP-PLATFORM -SWIVEL
S/N SLE1-UP
PART OF 234-9515 PLATFORM GP-ACCESS, 266-9650 PLATFORM GP-OPERATOR
Type 2
AN ATTACHMENT
i02405510 SEBP3507
2349516 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your TH355B TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 243-6361 [1] ALARM GP (ACTION)  
2. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
3. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
4. 8T-9655 [8] MOUNT-ISOLATION  
5. 202-2277 [1] SWITCH AS-ROCKER (PLATFORM SELECT)  
  111-7899 [1] GASKET  
6. 202-2278 [1] SWITCH AS-ROCKER (ENGINE START)  
  111-7899 [1] GASKET  
7. 213-2581 [3] COVER  
8. 213-5091 Y [1] SWITCH GP-PUSH BUTTON (ENGINE STOP)  
9. 213-5093 Y [1] SWITCH GP-PEDAL (PLATFORM CONTROLS)  
10. 230-7185 [1] PLATE  
11. 230-7186 [1] PLATE  
12. 232-3811 Y [3] CONTROL GP-HANDLE (ACCESS PLATFORM)  
13. 268-1050 C [1] COVER  
14. 268-8777 C [1] HARNESS AS-PLATFORM  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  180-0050 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  174-0681 [1] PLUG AS  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  104-1995 [9] TERMINAL-BLADE (14-GA TO 18-GA)  
15. 270-2014 C [1] ENCLOSURE AS  
16. 270-9115 C [1] PLATE AS  
17. 273-0187 C [1] STRAP  
18. 099-3649 CM [4] BOLT (M8X1.25X40-MM)  
19. 124-0312 [12] SCREW-PAN HEAD (8-16X0.32-IN)  
20. 170-5632 CM [4] BOLT (M4X0.7X16-MM)  
21. 212-9870 [1] LAMP AS (12-VOLT)  
22. 235-4398 [1] MODULE GP-DISPLAY (LOAD INDICATOR)  
23. 3C-6969 M [5] NUT (M3X0.5-THD)  
24. 3S-2093 C [13] STRAP-CABLE  
25. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
26. 5C-2890 CM [7] NUT (M6X1-THD)  
27. 5C-7261 CM [4] NUT (M8X1.25-THD)  
28. 5C-9553 CM [8] BOLT (M6X1X16-MM)  
29. 8T-0284 CM [5] SCREW-MACHINE (M3X0.5X8-MM)  
30. 8T-4138 CM [7] BOLT (M6X1X20-MM)  
31. 8T-4200 CM [4] BOLT (M8X1.25X16-MM)  
32. 8T-4205 C [8] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 8T-4224 C [4] WASHER-HARD (8.8X16X2-MM THK)  
34. 9B-1117 [5] LOCKWASHER  
35. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
36. 9X-8256 C [14] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054 Engine
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog TH355B :

WIRING GP-ENGINE
206-7181 WIRING GP-ENGINE
WIRING GP-ENGINE
206-7181 WIRING GP-ENGINE
WIRING GP-ENGINE
178-3502 WIRING GP-ENGINE
WIRING GP-ELECTRONIC CONTROL
258-4968 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
232-6670 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CHASSIS
274-6282 WIRING GP-CHASSIS
WIRING GP-CHASSIS
265-6515 WIRING GP-CHASSIS
WIRING GP-CHASSIS
225-8739 WIRING GP-CHASSIS
WIRING GP-LEVELING
200-2903 WIRING GP-LEVELING
WIRING GP-LEVELING
261-2703 WIRING GP-LEVELING
WIRING GP-MACHINE
227-1135 WIRING GP-MACHINE
WIRING GP-PLATFORM
210-1310 WIRING GP-PLATFORM
WIRING GP-PLATFORM
210-1311 WIRING GP-PLATFORM
WIRING GP-PLATFORM
210-1311 WIRING GP-PLATFORM
WIRING GP-PLATFORM
213-4663 WIRING GP-PLATFORM
WIRING GP-PLATFORM
234-9516 WIRING GP-PLATFORM

Truck sale:

Caterpillar TH355B, , Bau-Und Bergbauausrüstung
31,358 USD 
Caterpillar TH355B, , Bau-Und Bergbauausrüstung
- telehandler
ZEPPELIN BAUMASCHINEN
Germany
CATERPILLAR TH355B 2005
 
CATERPILLAR TH355B 2005
- TELEHANDLER
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR TH355B 2005
- TELEHANDLER
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
CAT TH355B
 
CAT TH355B

Finning Parts (UK) Ltd
Cannock, Staffs, United Kingdom
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.