ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRONICS GP-POWER TRAIN
WIRING GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP35110150
202-5797: WIRING GP-AIR CONDITIONER
202-5797 WIRING GP-AIR CONDITIONER
S/N BNK2753-5899
PART OF 202-5777 AIR CONDITIONER AR
AN ATTACHMENT
S/N BNK2753-5899
PART OF 202-5777 AIR CONDITIONER AR
AN ATTACHMENT
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9362 | [1] | RELAY AS (12-VOLT) | |
| 2. | 3S-2093 | [4] | STRAP-CABLE | |
| 3. | 8Y-7833 | [1] | WIRE AS (18-GA) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 9U-2277 | [1] | CLIP AS | |
| 5. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 6. | 113-8490 | [1] | FUSE (10-AMPERE) | |
| 7. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(AIR CONDITIONER COMPRESSOR) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 131-3201 | [2] | BOOT | |
| 9. | 169-0605 | [1] | SWITCH AS-ROCKER (BLOWER FAN SPEED) | |
| 10. | 169-0606 | [1] | SWITCH AS-ROCKER (AIR CONDITIONER, HEATER) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 11. | 170-2237 | [1] | RELAY AS (12-VOLT) | |
| 12. | 174-6417 | [1] | HARNESS AS-HEATER & AIR COND (AIR COMPRESSOR) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 13. | 229-8377 | [1] | CIRCUIT BREAKER AS (35-AMPERE) | |
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 14. | 220-4141 | [1] | HARNESS AS-HEATER & AIR COND (BLOWER FAN SPEED) | |
| 142-9117 | [2] | CONNECTOR (10-PIN) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 7T-0093 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 192-2111 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7T-0094 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 192-2112 | [3] | SOCKET-TERMINAL | ||
| 8L-8413 | [25] | STRAP-CABLE (WHITE) | ||
| 128-2016 | [8] | TERMINAL | ||
| 2L-8065 | [2] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 112-9611 | [7] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 3E-9179 | [4] | TERMINAL-RECEPTACLE (14-GA TO 18-GA) | ||
| 111-6792 | [1] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 15. | 138-8454 M | [1] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 16. | 213-7315 M | [2] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 17. | 4B-4863 | [1] | WASHER (4.7X11X1.2-MM THK) | |
| 18. | 4P-8134 | [1] | CLIP (LADDER) | |
| 19. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 21. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP35110151
202-6107: WIRING GP-AIR CONDITIONER
202-6107 WIRING GP-AIR CONDITIONER
S/N BNK2502-5899
SHUT-OFF
PART OF 202-5775 COOLING AR-HIGH AMBIENT TEMP
AN ATTACHMENT
S/N BNK2502-5899
SHUT-OFF
PART OF 202-5775 COOLING AR-HIGH AMBIENT TEMP
AN ATTACHMENT
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9362 | [1] | RELAY AS (12-VOLT)(HEATER, A/C POWER) | |
| 2. | 3S-2093 B | [6] | STRAP-CABLE | |
| 3. | 202-6108 | [1] | HARNESS AS-HEATER & AIR COND (POWER) | |
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [11] | STRAP-CABLE (WHITE) | ||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 111-6792 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 4. | 131-1424 | [1] | SEAL | |
| 5. | 188-2470 | [1] | TACHOMETER AS (12-VOLT) | |
| 4B-2043 | [6] | NUT (8-32-THD) | ||
| 9B-7233 | [6] | LOCKWASHER | ||
| 122-7137 | [1] | LAMP (12-VOLT) | ||
| B | USE AS REQUIRED | |||
#SEBP35110152
185-8809: WIRING GP-AUTOSHIFT
185-8809 WIRING GP-AUTOSHIFT
S/N BNK2502-5899
PART OF 192-4659, 192-4660, 192-4664 POWER TRAIN AR
AN ATTACHMENT
S/N BNK2502-5899
PART OF 192-4659, 192-4660, 192-4664 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8679 | [1] | DIODE AS-LIGHT | |
| 2. | 3S-2093 | [17] | STRAP-CABLE | |
| 3. | 6K-0806 | [5] | STRAP-CABLE | |
| 4. | 7K-1181 | [2] | STRAP-CABLE | |
| 5. | 8Y-7833 | [1] | WIRE AS (18-GA) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.1-M) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 7. | 155-8522 | [3] | MOUNT | |
| 8. | 169-0604 | [1] | SWITCH AS-ROCKER (AUTOSHIFT)(FIFTH GEAR LOCKOUT) | |
| 111-7899 | [1] | GASKET | ||
| 9. | 174-6411 | [1] | HARNESS AS-CONSOLE (AUTOSHIFT SWITCH) | |
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 112-9611 | [6] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 10. | 174-6415 | [1] | HARNESS AS-PLATFORM (AUTOSHIFT) | |
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 9X-3401 | [39] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 180-9340 | [17] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [27] | STRAP-CABLE (WHITE) | ||
| 141-8061 B | TAPE | |||
| 111-6792 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 174-6649 | [1] | CONTROL GP-TRANSMISSION | |
| 12. | 187-1043 | [1] | CONTROL GP-AUTOSHIFT | |
| 13. | 209-1925 | [1] | HARNESS AS-CONTROL (AUTOSHIFT CONTROL)(BATTERY BOX) | |
| 7T-8894 | [1] | GROMMET | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 180-9340 | [52] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
| 165-7097 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 006-2884 | [1] | TERMINAL-BLADE (16-GA TO 20-GA) | ||
| 6V-2689 E | TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 14. | 209-1947 | [1] | HARNESS AS-TRANSMISSION (AUTOSHIFT) | |
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 15. | 095-0756 M | [4] | SCREW-MACHINE (M5X0.8X16-MM) | |
| 16. | 138-8454 M | [1] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 17. | 3E-9362 | [1] | RELAY AS (12-VOLT) | |
| 18. | 4B-4863 | [1] | WASHER (4.7X11X1.2-MM THK) | |
| 19. | 4P-7429 | [1] | CLIP (LADDER) | |
| 20. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 21. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 22. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP35110153
185-8801: WIRING GP-CAB
185-8801 WIRING GP-CAB
S/N BNK2502-3078
STANDARD
PART OF 184-9737, 184-9738 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N BNK2502-3078
STANDARD
PART OF 184-9737, 184-9738 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-1118 | [1] | ANTENNA AS | |
| 2. | 8R-6111 | [1] | CABLE AS-COAXIAL | |
| 3. | 113-8491 | [2] | FUSE (15-AMPERE) | |
| 4. | 141-2759 | [1] | FUSE (5-AMPERE) | |
| 5. | 146-9439 | [1] | RELAY AS (12-VOLT)(CAB) | |
| 6. | 169-0596 | [1] | SWITCH AS-ROCKER (REAR WASHER, WIPER) | |
| 111-7899 | [1] | GASKET | ||
| 7. | 179-1215 | [1] | HARNESS AS-CAB (UPPER CAB CONTROLS) | |
| 8. | 213-8479 | [1] | SWITCH GP-MULTIFUNCTION (HD LIGHT, TURN SIG, WDO WIPER) | |
| 9. | 3S-2093 | [6] | STRAP-CABLE | |
| 10. | 4P-8134 | [1] | CLIP (LADDER) | |
| 11. | 8T-0352 M | [2] | BOLT (M5X0.8X45-MM) | |
| 12. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| M | METRIC PART | |||
#SEBP35110154
185-8801: WIRING GP-CAB
185-8801 WIRING GP-CAB
S/N BNK3079-5899
STANDARD
PART OF 184-9737, 184-9738 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N BNK3079-5899
STANDARD
PART OF 184-9737, 184-9738 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [6] | STRAP-CABLE | |
| 2. | 8E-1118 | [1] | ANTENNA AS | |
| 3. | 8R-6111 | [1] | CABLE AS-COAXIAL | |
| 4. | 113-8492 | [2] | FUSE (20-AMPERE) | |
| 5. | 141-2759 | [1] | FUSE (5-AMPERE) | |
| 6. | 146-9439 | [1] | RELAY AS (12-VOLT) | |
| 7. | 169-0596 | [1] | SWITCH AS-ROCKER (REAR WASHER, WIPER) | |
| 111-7899 | [1] | GASKET | ||
| 8. | 179-1215 | [1] | HARNESS AS-CAB (UPPER CAB CONTROLS) | |
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 180-9340 | [19] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [57] | STRAP-CABLE (WHITE) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 124-8616 | [2] | TERMINAL-RECEPTACLE (18-GA TO 22-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M) | |||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9. | 246-2671 | [1] | SWITCH AS-MULTIFUNCTION (HD LIGHT, TURN SIG, WDO WIPER) | |
| 11. | 4P-8134 | [1] | CLIP (LADDER) | |
| 12. | 8T-0352 M | [2] | BOLT (M5X0.8X45-MM) | |
| 13. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP35110155
185-8802: WIRING GP-CAB
185-8802 WIRING GP-CAB -CANOPY
S/N BNK2502-5899
PART OF 184-9736 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N BNK2502-5899
PART OF 184-9736 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 138-4894 | [1] | SWITCH AS-ROCKER (TURN SIGNAL) | |
| 111-7899 | [1] | GASKET | ||
| 2. | 164-1601 | [1] | BRACKET | |
| 3. | 183-4492 | [1] | HARNESS AS-OPERATOR CONTROLS (TURN SIGNAL) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 111-7898 | [1] | CONNECTOR (8-PIN) | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
| 091-2436 | [4] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 4. | 125-3298 M | [3] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP35110156
186-0306: WIRING GP-CAB
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-8491 | [1] | FUSE (15-AMPERE) | |
| 2. | 146-9439 B | [1] | RELAY AS (12-VOLT) | |
| 3. | 169-0595 | [1] | SWITCH AS-ROCKER (BEACON) | |
| 111-7899 | [1] | GASKET | ||
| 4. | 178-7539 | [1] | RECEPTACLE AS (POWER SUPPLY) | |
| 5. | 179-5435 | [1] | FLANGE | |
| 6. | 3E-6922 | [2] | SCREW-RECESS FLAT HEAD (6-19X0.5-IN) | |
| B | USE AS REQUIRED | |||
#SEBP35110157
169-0625: WIRING GP-CONSOLE
169-0625 WIRING GP-CONSOLE -FRONT
S/N BNK2502-5899
BASIC
PART OF 184-7863 CHASSIS AR
S/N BNK2502-5899
BASIC
PART OF 184-7863 CHASSIS AR
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [6] | STRAP-CABLE | |
| 2. | 144-9931 Y | [1] | MODULE GP-WARNING INDICATOR (WITHOUT ALARM) | |
| 3. | 157-1997 | [2] | SPACER (4.34X15.88X6.34-MM THK) | |
| 4. | 167-3701 | [1] | HARNESS AS-CONSOLE | |
| 5. | 169-0587 | [1] | SWITCH AS-ROCKER (HORN) | |
| 111-7899 | [1] | GASKET | ||
| 6. | 169-0588 | [1] | SWITCH AS-ROCKER (TRANSMISSION NEUTRAL LOCK) | |
| 111-7899 | [1] | GASKET | ||
| 7. | 229-8182 | [1] | SWITCH AS-ROCKER (HAZARD WARNING LIGHTS) | |
| 111-7899 | [1] | GASKET | ||
| 8. | 187-1644 | [7] | PLUG | |
| 9. | 095-0741 M | [2] | SCREW-MACHINE (M6X1-THD) | |
| 10. | 099-0492 M | [2] | LOCKNUT (M6X1-THD) | |
| 11. | 116-7491 | [2] | ANCHOR | |
| 12. | 205-7700 | [1] | KIT-SERVICE METER | |
| (INCLUDES FILM & METER) | ||||
| 13. | 188-0863 | [1] | FILM-IDENTIFICATION (MACHINE SYSTEMS INFORMATION) | |
| 14. | 8T-2659 M | [2] | LOCKNUT (M4X0.7-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35110158
186-0309: WIRING GP-CONSOLE
186-0309 WIRING GP-CONSOLE -FRONT, ALL WHEEL DRIVE
S/N BNK2502-5899
PART OF 184-7940 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N BNK2502-5899
PART OF 184-7940 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
#SEBP35110159
202-5810: WIRING GP-CONSOLE
202-5810 WIRING GP-CONSOLE -SIDE
S/N BNK2502-5899
PART OF 184-9737 CAB AR-ENCLOSED ROPS, 184-9736 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N BNK2502-5899
PART OF 184-9737 CAB AR-ENCLOSED ROPS, 184-9736 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 430D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 B | [12] | STRAP-CABLE | |
| 2. | 6K-0806 | [4] | STRAP-CABLE | |
| 3. | 7K-1181 | [3] | STRAP-CABLE | |
| 4. | 143-0421 Y | [1] | FILTER GP-OIL (HYDRAULIC) | |
| 5. | 157-1997 | [2] | SPACER (4.34X15.88X6.34-MM THK) | |
| 6. | 169-0586 | [1] | SWITCH AS-ROCKER (STARTING AID) | |
| 111-7899 | [1] | GASKET | ||
| 7. | 172-9200 | [1] | SUPPRESSOR-ARC | |
| 8. | 184-5293 B | [1] | PLUG | |
| 9. | 187-1644 B | [6] | PLUG | |
| 10. | 205-4286 | [1] | HARNESS AS-PANEL (SIDE CONSOLE) | |
| 180-9340 | [63] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [59] | STRAP-CABLE (WHITE) | ||
| 122-4401 | [18] | TERMINAL | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 5P-4571 | [4] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 091-2436 | [16] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [8] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 228-5856 | [8] | CONNECTOR (10-PIN) | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 114-1749 | [5] | RECEPTACLE AS | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 223-6539 Y | [1] | MODULE GP-WARNING INDICATOR (WITH ALARM) | |
| 12. | 226-7164 | [1] | GAUGE GP-COOLANT TEMPERATURE | |
| 4B-2043 | [3] | NUT (8-32-THD) | ||
| 7X-9065 | [1] | LAMP (12-VOLT) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 13. | 095-0741 M | [1] | SCREW-MACHINE (M6X1-THD) | |
| 14. | 116-7491 | [1] | ANCHOR | |
| 15. | 134-2305 | [3] | SEAL | |
| 16. | 170-6305 | [1] | GAUGE GP-FUEL LEVEL (FUEL LEVEL) | |
| 17. | 170-6542 | [1] | GAUGE GP-OIL TEMPERATURE (TORQUE CONVERTER) | |
| (EACH GAUGE GP INCLUDES) | ||||
| 4B-2043 | [3] | NUT (8-32-THD) | ||
| 7X-9065 | [1] | LAMP (12-VOLT) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 18. | 196-2966 | [1] | PLUG | |
| 19. | 198-0099 | [1] | FILM-IDENTIFICATION (INDICATOR) | |
| 20. | 4P-8134 B | [3] | CLIP (LADDER) | |
| 21. | 8T-2659 M | [2] | LOCKNUT (M4X0.7-THD) | |
| 22. | 8T-4133 BM | [3] | NUT (M10X1.5-THD) | |
| 23. | 8T-4191 BM | [3] | BOLT (M10X1.5X16-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Service Magazine
Caterpillar Parts SIS Catalog 430D :
Truck sale:
41.500
50.700
