WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)ELECTRICAL AND STARTING SYSTEM
RECEIVER GPWORK TOOLS
RIPPER GPWORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP35130890
107-3293: EDGE GP-BIT & CUTTING
107-3293 EDGE GP-BIT & CUTTING
S/N BLE1-UP; BMJ1-UP
EXTENDED WEAR LIFE-STRAIGHT
FOR USE WITH @@@@@108-3978@@@@@, @@@@@108-3979@@@@@, @@@@@108-3982@@@@@, @@@@@108-3983@@@@@
AN ATTACHMENT
S/N BLE1-UP; BMJ1-UP
EXTENDED WEAR LIFE-STRAIGHT
FOR USE WITH @@@@@108-3978@@@@@, @@@@@108-3979@@@@@, @@@@@108-3982@@@@@, @@@@@108-3983@@@@@
AN ATTACHMENT
For full view, you need register
#SEBP35130891
107-3294: EDGE GP-BIT & CUTTING
107-3294 EDGE GP-BIT & CUTTING
S/N BLE1-UP
EXTENDED WEAR LIFE-STRAIGHT
AN ATTACHMENT
S/N BLE1-UP
EXTENDED WEAR LIFE-STRAIGHT
AN ATTACHMENT
For full view, you need register
#SEBP35130892
5Q-5299: EDGE GP-BIT & CUTTING
5Q-5299 EDGE GP-BIT & CUTTING
S/N BLE1-UP; BMJ1-UP
PART OF 267-2518 BLADE GP-ANGLING, 5Q-5298 BLADE GP-SEMI-UNIVERSAL
AN ATTACHMENT
S/N BLE1-UP; BMJ1-UP
PART OF 267-2518 BLADE GP-ANGLING, 5Q-5298 BLADE GP-SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP35130893
6Y-1744: EDGE GP-BIT & CUTTING
6Y-1744 EDGE GP-BIT & CUTTING
S/N BLE1-UP; BMJ1-UP; 3EP1-UP
PART OF 9U-8093 BLADE & EDGE GP-STRAIGHT, 5Q-5779 BLADE GP-STRAIGHT
AN ATTACHMENT
S/N BLE1-UP; BMJ1-UP; 3EP1-UP
PART OF 9U-8093 BLADE & EDGE GP-STRAIGHT, 5Q-5779 BLADE GP-STRAIGHT
AN ATTACHMENT
For full view, you need register
#SEBP35130894
6Y-2039: EDGE GP-BIT & CUTTING
6Y-2039 EDGE GP-BIT & CUTTING -ANGLING BULLDOZER
S/N BLE1-UP; BMJ1-UP; 3GP1-UP; 4BP1-UP
PART OF 9U-8094, 9U-8202 BLADE & EDGE GP-STRAIGHT
AN ATTACHMENT
S/N BLE1-UP; BMJ1-UP; 3GP1-UP; 4BP1-UP
PART OF 9U-8094, 9U-8202 BLADE & EDGE GP-STRAIGHT
AN ATTACHMENT
For full view, you need register
#SEBP35130895
9W-3762: EDGE GP-BIT & CUTTING
9W-3762 EDGE GP-BIT & CUTTING
S/N BLE1-UP; BMJ1-UP; 3FP1-UP; 4AP1-UP
PART OF 9U-8095 BLADE & EDGE GP-SEMI-UNIVERSAL, 9U-8608 BLADE GP-SEMI-UNIVERSAL, 5Q-5499 BLADE GP-WASTE HANDLING, 7Z-9954 BULLDOZER GP
AN ATTACHMENT
S/N BLE1-UP; BMJ1-UP; 3FP1-UP; 4AP1-UP
PART OF 9U-8095 BLADE & EDGE GP-SEMI-UNIVERSAL, 9U-8608 BLADE GP-SEMI-UNIVERSAL, 5Q-5499 BLADE GP-WASTE HANDLING, 7Z-9954 BULLDOZER GP
AN ATTACHMENT
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP35130896
245-4122: MOUNTING GP-MAST
245-4122 MOUNTING GP-MAST -GRADE CONTROL
S/N BLE316-UP; BMJ164-UP
PART OF 288-2509 BLADE GP-ANGLING
AN ATTACHMENT
S/N BLE316-UP; BMJ164-UP
PART OF 288-2509 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP35130897
9W-0610: MOUNTING GP-RIPPER
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-0609 | [4] | SPACER (53X100X35-MM THK) | |
| 2. | 1U-0301 | [2] | BRACKET AS | |
| 3. | 1U-0612 | [2] | PIN | |
| 4. | 7X-0292 | [2] | BOLT (3/8-16X4.5-IN) | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 5. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| 6. | 5D-3118 | [20] | STUD-TAPERLOCK (1-8-THD) | |
| 7. | 7X-0335 | [2] | BOLT (1/2-13X5.25-IN) | |
| 8. | 1U-0300 | [1] | BRACKET AS (RH) | |
| 7T-1975 | [1] | BRACKET AS (LH) | ||
| 9. | 1U-0159 | [2] | PIN | |
| 10. | 9N-4449 B | [12] | SPACER (68X121X1.5-MM THK) | |
| 11. | 6V-8190 | [20] | NUT (1-8-THD) | |
| 12. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP35130898
9W-0804: RIPPER AR
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9T-2716 Y | [1] | CYLINDER GP-RIPPER | ||
| 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | ||
| 9W-1018 Y | [1] | LINES GP-RIPPER | ||
| 9W-0610 Y | [1] | MOUNTING GP-RIPPER | ||
| 9W-1017 Y | [1] | RIPPER GP | ||
| 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35130899
9W-1017: RIPPER GP
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-0201 | [1] | CARRIAGE AS | |
| 1A. | 5K-7748 | [3] | HOLDER-BIT | |
| 9W-0513 | [2] | PLATE AS | ||
| 2. | 2K-4309 | [1] | REINFORCEMENT (RH) | |
| 2K-4310 | [1] | REINFORCEMENT (LH) | ||
| 3. | 9W-0553 | [1] | PLATE AS | |
| 4. | 9J-9598 | [2] | PIN | |
| 5. | 7X-0292 | [2] | BOLT (3/8-16X4.5-IN) | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 6. | 8T-9389 | [8] | BOLT (1/2-13X2.75-IN) | |
| 7. | 6V-8188 | [8] | NUT (1/2-13-THD) | |
| 8. | 9W-0873 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 9. | 9W-0876 | [2] | BUSHING | |
| 10. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 11. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 12. | 3K-8510 | [1] | PIN | |
| 13. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 14. | 2K-0703 | [1] | BAR | |
| 15. | 189-0985 | [1] | FRAME & BEARING AS | |
| 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | ||
| 16. | 9W-0099 | [4] | BUSHING | |
| 17. | 1U-0159 | [2] | PIN | |
| 18. | 7X-0340 | [2] | BOLT (1/2-13X6.5-IN) | |
| 19. | 9J-8926 Y | [1] | TOOTH GP-RIPPER | |
| 20. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
