AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

232-5960 LINES GP-WINCH S/N BNC1-UP; DAE1-UP PART OF 232-6203 CONTROL AR-HYDRAULIC AN ATTACHMENT D6R II


HYDRAULIC SYSTEM
LINES GP-WINCH
MANIFOLD GP
MOTOR GP
MOUNTING GP
CYLINDER GP
MOUNTING GP
PUMP GP

TRACK-TYPE TRACTOR D6R II TRACK-TYPE TRACTOR BNC
 D6R Series II TRACK-TYPE TRACTOR LGP, XW BNC00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3515 D6R II BNC   (2001)

HYDRAULIC SYSTEM

LINES GP-WINCH
LINES GP-WINCH
232-5960 LINES GP-WINCH
 

#SEBP35150640
 

232-5960: LINES GP-WINCH

232-5960 LINES GP-WINCH
S/N BNC1-UP; DAE1-UP
PART OF 232-6203 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02298679 SEBP3515
2325960 LINES GP-WINCH Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 170-4891 [1] HARNESS AS-SOLENOID (WINCH, REAR)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 178-5036 [1] BRACKET AS  
4. 201-0950 Y [1] VALVE GP-SOLENOID (WINCH CONTROL)  
5. 234-2869 [1] MANIFOLD (HYDRAULIC)  
6. 234-3425 [1] GUARD  
7. 239-5235 [1] BRACKET AS  
8. 240-0244 I [2] HOSE AS  
9. 240-0246 I [1] HOSE AS  
10. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
11. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
12. 148-8411 [1] PLUG AS  
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
13. 164-9904 [1] TEE AS  
  122-9088 [1] TEE  
  2M-9780 [1] SEAL-O-RING  
  6V-9746 [2] SEAL-O-RING  
14. 183-3406 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4191 [1] PLUG (9/16-18-THD)  
  6V-5049 [1] SEAL-O-RING  
15. 1P-3702 [2] SEAL-RECTANGULAR  
16. 1P-3703 [4] SEAL-RECTANGULAR  
17. 1S-0994 [2] CLIP (LOOP)  
18. 4P-7581 [1] CLIP (LADDER)  
19. 5P-0047 [2] COVER  
20. 5P-1075 [5] WASHER-HARD (10.2X22.5X3-MM THK)  
21. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
22. 6V-0400 [8] FLANGE-HALF  
23. 7G-3832 [1] GROMMET  
24. 7G-3833 [1] CLIP (TAB)  
25. 7G-3834 [1] CLIP (SLOT)  
26. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
27. 8T-4184 M [16] BOLT (M12X1.75X45-MM)  
28. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
29. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35150641
 

164-8913: MANIFOLD GP-VALVE

164-8913 MANIFOLD GP-VALVE
S/N BNC1-UP; DAE1-UP
PART OF 162-8034 VALVE GP-BANK 3, 162-8036, 232-5921 VALVE GP-BANK 4
ALSO AN ATTACHMENT
i01602892 SEBP3515
1648913 MANIFOLD GP-VALVE Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3541 Y [1] VALVE GP-RELIEF (MAIN)  
2. 148-8407 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
3. 1P-5766 [2] FLANGE-HALF  
4. 8C-6877 [4] BOLT (7/16-14X1.75-IN)  
5. 8T-5360 [4] WASHER (12X22.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP35150642
 

159-7156: MOTOR GP-PISTON

159-7156 MOTOR GP-PISTON -STEERING
S/N BNC1-UP; DAE1-UP
PART OF 164-4808 HYDRAULIC AR
i01121678 SEBP3515
1597156 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6001 Y [1] ROTATING GP-MOTOR  
2. 106-1227 [1] HOUSING  
3. 2H-3934 [1] SEAL-O-RING  
4. 9T-4849 [1] HEAD  
5. 8T-4231 [1] DOWEL  
6. 8T-3957 M [6] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35150643
 

167-1170: MOUNTING GP-CONTROL VALVE

167-1170 MOUNTING GP-CONTROL VALVE
S/N BNC1-353; DAE1-175
PART OF 168-7419 CONTROL AR-PILOT HYDRAULIC
i01590635 SEBP3515
1671170 MOUNTING GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-5291 M [4] SCREW (M10X1.5X30-MM)  
2. 160-4702 [1] PLATE  
3. [1] PLATE AS  
  7T-1099 [4] LINK  
4. 165-8433 [1] GASKET  
5. 7X-7729 [4] WASHER (11X25X3-MM THK)  
6. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
7. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP35150644
 

167-1170: MOUNTING GP-CONTROL VALVE

167-1170 MOUNTING GP-CONTROL VALVE
S/N BNC354-UP; DAE176-UP
PART OF 168-7419 CONTROL AR-PILOT HYDRAULIC
i02225897 SEBP3515
1671170 MOUNTING GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-4702 [1] PLATE  
2. [1] PLATE AS  
  5D-9629 [1] ROD  
  7T-1099 [3] LINK  
3. 172-5291 M [4] SCREW (M10X1.5X30-MM)  
4. 225-4134 [1] GASKET  
5. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
6. 7X-7729 [4] WASHER (11X25X3-MM THK)  
7. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 225-4135 [1] GASKET  
  M   METRIC PART
 

#SEBP35150645
 

167-1171: MOUNTING GP-CONTROL VALVE

167-1171 MOUNTING GP-CONTROL VALVE
S/N BNC1-353; DAE1-175
PART OF 232-5959 CONTROL AR-HYDRAULIC, 171-6134 CONTROL AR-PILOT HYDRAULIC
AN ATTACHMENT
i01592287 SEBP3515
1671171 MOUNTING GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-5291 M [4] SCREW (M10X1.5X30-MM)  
2. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
3. [1] PLATE AS  
  5D-9629 [1] ROD  
  7T-1099 [3] LINK  
4. 225-4135 [1] GASKET  
5. 7X-7729 [4] WASHER (11X25X3-MM THK)  
6. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
7. 225-4134 [1] GASKET  
  M   METRIC PART
 

#SEBP35150646
 

167-1171: MOUNTING GP-CONTROL VALVE

167-1171 MOUNTING GP-CONTROL VALVE
S/N BNC354-UP; DAE176-UP
PART OF 232-5959 CONTROL AR-HYDRAULIC, 171-6134 CONTROL AR-PILOT HYDRAULIC
AN ATTACHMENT
i02225919 SEBP3515
1671171 MOUNTING GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-5291 M [4] SCREW (M10X1.5X30-MM)  
2. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
3. [1] PLATE AS  
  5D-9629 [1] ROD  
  7T-1099 [3] LINK  
4. 225-4135 [1] GASKET  
5. 7X-7729 [4] WASHER (11X25X3-MM THK)  
6. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
7. 225-4134 [1] GASKET  
  M   METRIC PART
 

#SEBP35150647
 

3G-9451: MOUNTING GP-CYLINDER

3G-9451 MOUNTING GP-CYLINDER
S/N BNC1-UP; DAE1-UP; 3HP1-UP; 9BP1-UP
PART OF 139-2633 BULLDOZER AR-SEMI-UNIVERSAL, 108-3972 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00365785 SEBP3515
3G9451 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3G-9405 [4] CAP AS  
    (EACH INCLUDES)
2A. 3G-9402 [1] BUSHING  
3. 4T-4875 [2] PIN  
4. 5P-2671 [2] SEAL-LIP TYPE  
5. 299-5344 [2] YOKE  
6. 6Y-9280 C [2] CLAMP (TAB)  
7. 6Y-9281 C [2] CLAMP (SLOT)  
8. 9N-4233 C [2] STRAP  
9. 5P-2566 C [2] BOLT (1/2-13X1.5-IN)  
10. 6V-8188 C [2] NUT (1/2-13-THD)  
11. 7X-2557 M [8] BOLT (M16X2X140-MM)  
12. 8T-2561 [2] WASHER-HARD (10.5X28.5X5-MM THK)  
13. 8T-4123 C [2] WASHER (3.62X5.75X0.375-MM THK)  
14. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
15. 8T-4223 C [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP35150648
 

166-7289: MOUNTING GP-VALVE

166-7289 MOUNTING GP-VALVE
S/N BNC1-UP; DAE1-UP
PART OF 164-4808 HYDRAULIC AR
i01602834 SEBP3515
1667289 MOUNTING GP-VALVE Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-5993 [1] PLATE AS  
2. 7X-0325 [3] BOLT (1/2-13X2.5-IN)  
3. 7X-0346 [3] BOLT (5/8-11X2-IN)  
4. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
5. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8T-6871 [1] BOLT (5/8-11X2.5-IN)  
 

#SEBP35150649
 

162-0324: PUMP GP-PISTON

162-0324 PUMP GP-PISTON -IMPLEMENT, STEERING
S/N BNC1-UP; DAE1-UP
PART OF 164-4808 HYDRAULIC AR
i01602663 SEBP3515
1620324 PUMP GP-PISTON Parts scheme 1620324 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your D6R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-0940 [1] RING-RETAINING (INTERNAL)  
2. 7X-1553 [1] SEAL-LIP TYPE  
3. 197-0074 [1] HOUSING  
4. 9S-8006 [2] PLUG (7/8-14-THD)  
5. 2M-9780 [2] SEAL-O-RING  
6. 197-0075 [1] RACE  
7. 197-0076 [1] BEARING  
8. 197-0077 [1] SHAFT  
9. 8U-9480 [2] PIN  
10. 197-0078 [2] BEARING  
11. 131-4647 [1] CRADLE  
12. 121-9915 [3] SLEEVE  
13. 197-0079 [9] PISTON AS  
14. 131-4649 [1] WASHER (61X123X5.5-MM THK)  
15. 197-0080 [1] PLATE  
16. 131-4657 [1] PLATE  
17. 8U-3297 M [4] BOLT (M10X1.5X25-MM)  
18. 286-1674 [1] BARREL  
19. 197-0082 [1] WASHER (39.2X53.8X4-MM THK)  
20. 197-0083 [1] SPRING  
21. 197-0084 [1] RING  
22. 197-0085 [1] SPACER (41X46X19.2-MM THK)  
23. 195-6882 [1] RING  
24. 121-9943 [1] RING  
25. 197-0086 [1] SPACER (47X54X38-MM THK)  
26. 197-0087 [1] RING  
27. 197-0090 [1] PLATE  
28. 101-2862 [2] DOWEL  
29. 197-0088 [1] RING  
30. 197-0089 [1] BEARING  
31. 199-4193 B [1] KIT-SHIM (INCLUDES 21-SHIMS)  
32. 8C-3131 [2] SEAL-O-RING  
33. 121-9941 [2] RING  
34. 131-4674 [2] PIPE  
35. 131-4675 [1] RING  
36. 131-4676 [1] PISTON  
37. 284-3781 [1] PISTON  
38. 197-0093 [1] RETAINER  
39. 197-0094 [1] SPRING  
40. 288-1199 [1] RETAINER  
41. 284-3782 [1] PISTON  
42. 9T-4901 M [2] NUT (M12X1-THD)  
43. 121-9946 [2] PIN  
44. 3E-6910 M [9] BOLT-SOCKET HEAD (M12X1.75X70-MM)  
45. 117-8765 [1] SEAL-O-RING  
46. 8T-9384 [2] BOLT (1/2-13X0.875-IN)  
47. 195-6932 [1] COVER  
48. 227-3021 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
49. 285-8226 [1] HOUSING  
50. 8U-3875 [1] PLUG  
51. 5W-7461 B [1] SHIM (1.05-MM THK)  
52. 5W-7462 B [1] SHIM (1.1-MM THK)  
53. 5W-7463 B [1] SHIM (1.15-MM THK)  
54. 5W-7464 B [1] SHIM (1.25-MM THK)  
55. 5W-7465 B [1] SHIM (1.5-MM THK)  
56. 5W-7466 B [1] SHIM (1.75-MM THK)  
57. 131-4654 B [1] PLATE (0.05-MM THK)  
58. 131-4655 B [1] PLATE (0.075-MM THK)  
59. 131-4656 B [1] PLATE (0.1-MM THK)  
60. 131-4650 B [1] PLATE (0.05-MM THK)  
61. 131-4651 B [1] PLATE (0.075-MM THK)  
62. 131-4652 B [1] PLATE (0.1-MM THK)  
63. 6V-5192 M [3] BOLT-SOCKET HEAD (M8X1.25X30-MM)  
64. 285-5644 [1] RING-RETAINING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6R II :

LINES GP-TILT CYLINDER
9W-9079 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
1U-2525 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
166-7283 LINES GP-TILT CYLINDER
LINES GP-TILT
4Z-9225 LINES GP-TILT
LINES GP-RIPPER
9W-1018 LINES GP-RIPPER
LINES GP-RIPPER
171-6132 LINES GP-RIPPER
LINES GP-PUMP
166-7286 LINES GP-PUMP
LINES GP-PUMP
166-7286 LINES GP-PUMP
MANIFOLD GP-VALVE
164-8913 MANIFOLD GP-VALVE
MOTOR GP-PISTON
159-7156 MOTOR GP-PISTON
MOUNTING GP-CONTROL VALVE
167-1170 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CONTROL VALVE
167-1170 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CONTROL VALVE
167-1171 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CONTROL VALVE
167-1171 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CYLINDER
3G-9451 MOUNTING GP-CYLINDER
MOUNTING GP-VALVE
166-7289 MOUNTING GP-VALVE

Truck sale:

Caterpillar D6RIILGP, Construction
67,831 
Caterpillar D6RIILGP, Construction
- Dozers
FINNING CANADA
Canada
Caterpillar D6RIIXL, Construction
82,326 
Caterpillar D6RIIXL, Construction
- Dozers
FINNING CANADA
Canada
Caterpillar D6RII, Construction
160,000 
Caterpillar D6RII, Construction
- Dozers
Амур Машинери | Amur Machinery
Russia
 
111,500 
Caterpillar D6RIILGP, Construction
- Dozers
ZIEGLER CAT
Caterpillar D6RIILGP, Construction
72,000 
Caterpillar D6RIILGP, Construction
- Dozers
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.