AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

219-2455 PUMP GP-FUEL TRANSFER S/N CPT5000-UP PART OF 179-1797, 206-2745, 295-9745 ENGINE AR-PRIMARY IT28G


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER
TANK GP-FUEL
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALTERNATOR GP-CHARGING

INTEGRATED TOOLCARRIER IT28G INTEGRATED TOOLCARRIER DBT
 928G Wheel Loader IT28G Integrated Toolcarrier DBT00001-01676 (MACHINE) POWERED BY 3056E Engine SEBP3520 IT28G DBT   (2002)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
219-2455 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
219-2455 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
233-2638 PUMP GP-FUEL TRANSFER
 

#SEBP35200100
 

219-2455: PUMP GP-FUEL TRANSFER

219-2455 PUMP GP-FUEL TRANSFER
S/N CPT5000-UP
PART OF 179-1797, 206-2745, 295-9745 ENGINE AR-PRIMARY
i02062542 SEBP3520
2192455 PUMP GP-FUEL TRANSFER Parts scheme 2192455 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 C [3] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
5. 033-7849 [1] PLUG  
6. 067-6269 C [3] FERRULE  
7. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
8. 101-3906 [1] BOLT  
9. 101-3907 [2] WASHER  
10. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
11. 102-9988 [1] SPACER  
12. 127-8162 [1] CLIP  
13. 162-2000 [1] WASHER  
14. 216-9043 [1] PUMP AS-FUEL TRANSFER  
14A. 231-4457 [1] GASKET  
15. 216-9053 [1] CONNECTOR  
16. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
17. 216-9092 [2] CONNECTOR-SPECIAL (BANJO)  
18. 216-9752 [4] WASHER  
19. 217-0721 [1] BOLT-SPECIAL (BANJO)  
20. 219-2443 [1] TUBE AS  
20A. 102-9986 [1] CLIP  
20B. 067-6268 [1] NUT-FUEL LINE  
20C. 067-6269 [1] FERRULE  
21. 219-2450 [1] BRACKET  
24. 219-2453 [1] TUBE AS  
24A. 149-6117 [1] CLIP  
25. 223-5418 [1] TUBE AS  
25A. 067-6268 [2] NUT-FUEL LINE  
25B. 067-6269 [2] FERRULE  
25C. 102-9986 [1] CLIP  
25D. 102-9987 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP35200101
 

219-2455: PUMP GP-FUEL TRANSFER

219-2455 PUMP GP-FUEL TRANSFER
S/N CPT1-4999
PART OF 179-1797, 206-2745, 295-9745 ENGINE AR-PRIMARY
i01725072 SEBP3520
2192455 PUMP GP-FUEL TRANSFER Parts scheme 2192455 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [5] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
5. 033-7849 [1] PLUG  
6. 067-6269 [4] FERRULE  
7. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
8. 101-3906 [1] BOLT  
9. 101-3907 [2] WASHER  
10. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
11. 102-9988 [1] SPACER  
12. 127-8162 [1] CLIP  
13. 162-2000 [1] WASHER  
14. 216-9043 [1] PUMP AS-FUEL TRANSFER  
14A. 231-4457 [1] GASKET  
15. 216-9053 [1] CONNECTOR  
16. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
17. 216-9092 [1] CONNECTOR-SPECIAL (BANJO)  
18. 216-9752 [4] WASHER  
19. 217-0721 [1] BOLT-SPECIAL (BANJO)  
20. 219-2443 [1] TUBE AS  
20A. 102-9986 [1] CLIP  
20B. 067-6268 [1] NUT-FUEL LINE  
20C. 067-6269 [1] FERRULE  
21. 219-2450 [1] BRACKET  
22. 219-2451 [1] CONNECTOR-SPECIAL (BANJO)  
23. 219-2452 [1] BALL  
24. 219-2453 [1] TUBE AS  
24A. 149-6117 [1] CLIP  
25. 223-5418 [1] TUBE AS  
25A. 067-6268 [2] NUT-FUEL LINE  
25B. 067-6269 [2] FERRULE  
25C. 102-9986 [1] CLIP  
25D. 102-9987 [1] CLIP  
  M   METRIC PART
 

#SEBP35200102
 

233-2638: PUMP GP-FUEL TRANSFER

233-2638 PUMP GP-FUEL TRANSFER
S/N CPT1-1190
PART OF 179-1797 ENGINE AR-PRIMARY
i02022552 SEBP3520
2332638 PUMP GP-FUEL TRANSFER Parts scheme 2332638 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [6] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-0654 M [2] BOLT (M10X1.5X25-MM)  
5. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
6. 033-7849 [1] PLUG  
7. 067-6269 [5] FERRULE  
8. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
9. 101-3906 [1] BOLT  
10. 101-3907 [2] WASHER  
11. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
12. 102-9988 [1] SPACER  
13. 162-2000 [1] WASHER  
14. 216-9043 [1] PUMP AS-FUEL TRANSFER  
14A. 231-4457 [1] GASKET  
15. 216-9053 [1] CONNECTOR  
16. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
17. 216-9092 [1] CONNECTOR-SPECIAL (BANJO)  
18. 216-9752 [4] WASHER  
19. 217-0721 [1] BOLT-SPECIAL (BANJO)  
20. 219-2443 [1] TUBE AS  
20A. 067-6268 [1] NUT-FUEL LINE  
20B. 067-6269 [1] FERRULE  
20C. 102-9986 [1] CLIP  
21. 219-2450 [1] BRACKET  
22. 219-2451 [1] CONNECTOR-SPECIAL (BANJO)  
23. 219-2452 [1] BALL  
24. 219-2453 [1] TUBE AS  
24A. 149-6117 [1] CLIP  
25. 223-5418 [1] TUBE AS  
25A. 067-6268 [2] NUT-FUEL LINE  
25B. 067-6269 [2] FERRULE  
25C. 102-9986 [1] CLIP  
25D. 102-9987 [1] CLIP  
26. 232-3368 [1] TUBE AS  
  M   METRIC PART
 

#SEBP35200103
 

220-5557: SEPARATOR GP-WATER

220-5557 SEPARATOR GP-WATER -PRIMARY FUEL FILTER
S/N DJD1-2977; DBT1-1676
WITH BOWL
PART OF 184-1333 LINES GP-FUEL
i01773888 SEBP3520
2205557 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-9401 [1] BOWL AS-WATER COLLECTION  
  128-8614 [1] KIT-SEAL (WATER SEPARATOR)  
2. 118-8118 [1] RING-RETAINING  
3. 118-8119 [1] NUT  
4. 121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)  
    (INCLUDES CAP NUT, HEADER CAP, CAP SEAL, VOLUME PLUG, O-RING SEAL, VENT PLUG, DUST SEAL & RETAINING RING)
5. 131-1812 [1] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
 

#SEBP35200104
 

202-0354: TANK & MTG GP-FUEL

202-0354 TANK & MTG GP-FUEL
S/N DJD1-2977; DBT1-1676
PART OF 176-5221, 204-4349 CHASSIS AR
i01774612 SEBP3520
2020354 TANK & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 202-0355 [1] TANK AS-FUEL  
  142-8828 [1] CAP AS-FILLER (FUEL)  
  180-3730 [1] STRAINER-FUEL (FILLER NECK SCREEN)  
  206-4441 [1] ADAPTER-FUEL CAP  
2. 202-0360 [2] STRAP AS  
    (EACH INCLUDES)
  202-0358 [1] STRAP  
3. 180-4686 M [2] BOLT (M10X1.5X60-MM)  
4. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [2] NUT (M10X1.5-THD)  
6. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

#SEBP35200105
 

3E-6328: ALARM GP

3E-6328 ALARM GP -ACTION
S/N DJD1-2977; DBT1-1676
24-VOLT
PART OF 204-9417 LIGHTING GP-FLOOD & SIGNAL
i00089659 SEBP3520
3E6328 ALARM GP Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#SEBP35200106
 

177-9953: ALTERNATOR GP-CHARGING

177-9953 ALTERNATOR GP-CHARGING
S/N DJD1-2977; DBT1-1676
24-VOLT, 80-AMPERE
PART OF 210-1672, 254-1543 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i01531014 SEBP3520
1779953 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-2653 [1] FRAME  
2. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
3. 185-2639 [1] FAN AS (ALTERNATOR)  
4. 1H-3244 [1] LOCKWASHER  
5. 185-2645 [1] FRAME  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
8. 228-9657 [1] COVER AS  
9. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 185-2647 [1] GROMMET  
11. 9L-6770 [1] CAP-DUST  
12. 423-2775 [1] STATOR AS (24-VOLT, 95-AMPERE)(ALTERNATOR)  
13. 185-2638 [2] COLLAR  
14. 185-2654 [1] PLATE  
15. 185-2650 [1] ROTOR AS (ALTERNATOR)  
16. 185-2644 [1] COIL AS  
17. 185-2648 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
18. 6V-8189 J [1] NUT (5/16-18-THD)  
19. 8T-4224 J [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 3F-9556 J [1] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  199-7891 J [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, WASHERS, NUT & STEP NUT)
  185-2655 [1] KIT-BEARING (ALTERNATOR)  
    (INCLUDES 3 BEARINGS)
  199-8436 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET & NUT)
  185-2658 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES BOLTS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP35200107
 

197-8820: ALTERNATOR GP-CHARGING

197-8820 ALTERNATOR GP-CHARGING
S/N DJD1-2977; DBT1-1676
24-VOLT, 95-AMPERE
PART OF 210-1675, 256-4715 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i01691128 SEBP3520
1978820 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-2653 [1] FRAME  
2. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
3. 185-2639 [1] FAN AS  
4. 1H-3244 [1] LOCKWASHER  
5. 185-2645 [1] FRAME  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
8. 228-9657 [1] COVER AS  
9. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 185-2647 [1] GROMMET  
11. 9L-6770 [1] CAP-DUST  
12. 205-0626 [1] STATOR AS-ALTERNATOR  
13. 185-2638 [2] COLLAR  
14. 185-2654 [1] PLATE  
15. 185-2650 [1] ROTOR AS  
16. 185-2644 [1] COIL AS  
17. 185-2648 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
18. 6V-8189 [1] NUT (5/16-18-THD)  
19. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 3F-9556 [1] LOCKWASHER  
21. 185-2655 [1] KIT-BEARING (ALTERNATOR)  
    (INCLUDES BEARINGS)
22. 199-8436 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLTS, GROMMET & NUTS)
23. 199-7891 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, WASHERS & NUTS)
24. 185-2658 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES BOLTS)
 

#SEBP35200108
 

210-1672: ALTERNATOR GP-CHARGING

210-1672 ALTERNATOR GP-CHARGING
S/N DJD1-2977; DBT1-1676
24-VOLT,80-AMP
AN ATTACHMENT
i01782199 SEBP3520
2101672 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6246 [1] PULLEY-ALTERNATOR (2-GROOVE)  
2. 9S-1240 [1] BRACKET AS  
3. 130-3216 [1] V-BELT SET (INCLUDES 2-BELTS)  
4. 157-2393 [1] BRACKET AS  
5. 158-2829 [1] STRAP  
6. 212-8743 [1] BRACKET-ALTERNATOR  
7. 177-9953 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE)  
8. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
9. 7X-0338 [1] BOLT (1/2-13X6-IN)  
10. 7X-7729 [1] WASHER (11X25X3-MM THK)  
11. 8C-4436 [1] BOLT (1/2-13X1.375-IN)  
12. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
13. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
16. 8T-6870 M [2] BOLT (M8X1.25X70-MM)  
17. 7X-0599 [1] WASHER-HARD (13X20X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35200109
 

210-1675: ALTERNATOR GP-CHARGING

210-1675 ALTERNATOR GP-CHARGING
S/N DJD1-2977; DBT1-1676
24-VOLT,95-AMP
AN ATTACHMENT
i01746937 SEBP3520
2101675 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6246 [1] PULLEY-ALTERNATOR (2-GROOVE)  
2. 9S-1240 [1] BRACKET AS  
3. 130-3216 [1] V-BELT SET (INCLUDES 2-BELTS)  
4. 157-2393 [1] BRACKET AS  
5. 158-2829 [1] STRAP  
6. 197-8820 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 95-AMPERE)  
7. 212-8743 [1] BRACKET-ALTERNATOR  
8. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
9. 7X-0338 [1] BOLT (1/2-13X6-IN)  
10. 7X-7729 [1] WASHER (11X25X3-MM THK)  
11. 8C-4436 [1] BOLT (1/2-13X1.375-IN)  
12. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
13. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
16. 8T-6870 M [2] BOLT (M8X1.25X70-MM)  
17. 7X-0599 [1] WASHER-HARD (13X20X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog IT28G :

PUMP GP-FUEL INJECTION
249-2897 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
LINES GP-FUEL
233-2483 LINES GP-FUEL
LINES GP-FUEL
184-1333 LINES GP-FUEL
FILTER GP-FUEL
235-6347 FILTER GP-FUEL
BASE GP-FUEL FILTER
141-7844 BASE GP-FUEL FILTER
PUMP GP-FUEL TRANSFER
219-2455 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
233-2638 PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER
220-5557 SEPARATOR GP-WATER
TANK & MTG GP-FUEL
202-0354 TANK & MTG GP-FUEL
ALARM GP
3E-6328 ALARM GP
ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
197-8820 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
210-1672 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
MILTON CAT
Caterpillar IT28G, Wheel Loaders, Construction
37,500 
Caterpillar IT28G, Wheel Loaders, Construction
- Wheel Loaders
OHIO CAT
Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
ZIEGLER CAT
 
48,707 
Caterpillar IT28G, Wheel Loaders, Construction


Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.