AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

189-4870 WIRING GP-COMMUNICATION -PRODUCT LINK 201 S/N DJD1443-2977; DBT1547-1676 AN ATTACHMENT IT28G


ELECTRICAL AND STARTING SYSTEM
WIRING GP

ELECTRICAL AND STARTING SYSTEM
WIRING GP


INTEGRATED TOOLCARRIER IT28G INTEGRATED TOOLCARRIER DBT
 928G Wheel Loader IT28G Integrated Toolcarrier DBT00001-01676 (MACHINE) POWERED BY 3056E Engine SEBP3520 IT28G DBT   (2002)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
233-6563 WIRING GP-CAB
WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-ELECTRONIC CONTROL
219-2462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
 

#SEBP35200200
 

189-4870: WIRING GP-COMMUNICATION

189-4870 WIRING GP-COMMUNICATION -PRODUCT LINK 201
S/N DJD1443-2977; DBT1547-1676
AN ATTACHMENT
i02242036 SEBP3520
1894870 WIRING GP-COMMUNICATION Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [7] STRAP-CABLE  
2. 9R-4750 [1] BOSS (19.76X20X28-MM THK)  
3. 031-5644 B [6] CLIP  
4. 190-4564 [1] PLATE AS  
  2M-7077 [4] SPACER (0.406X0.62X0.37-IN THK)  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
5. 207-6796 [1] ANTENNA AS (FLEXIBLE)  
6. 218-2439 [1] HARNESS AS-CONTROL (PRODUCT LINK)  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 226-3681 [1] PLATE  
8. 230-1340 [1] FILM-WARNING (PRODUCT LINK RADIO, U.S.)  
9. 242-7205 CY [1] CONTROL GP-COMMUNICATION (PRODUCT LINK 201)  
10. 8T-4138 M [3] BOLT (M6X1X20-MM)  
11. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
12. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 8T-4971 M [4] BOLT (M6X1X30-MM)  
14. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35200201
 

219-2462: WIRING GP-ELECTRONIC CONTROL

219-2462 WIRING GP-ELECTRONIC CONTROL
S/N CPT1-UP
PART OF 179-1797 ENGINE AR-PRIMARY
i01725083 SEBP3520
2192462 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4458 M [3] BOLT (M8X1.25X14-MM)  
2. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
3. 140-8783 M [1] BOLT (M10X1.5X45-MM)  
4. 216-9086 [2] SPACER (10.5X20X32-MM THK)  
5. 217-8477 [2] CLIP  
6. 217-9038 [5] BOLT (M4X0.7X14-MM)  
7. 217-9039 [2] STRAP-CABLE  
8. 226-8778 [1] BRACKET  
9. 226-8780 [1] BRACKET  
10. 228-7477 [1] CLIP  
11. 233-4694 [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
  M   METRIC PART
 

#SEBP35200202
 

258-0807: WIRING GP-ELECTRONIC CONTROL

258-0807 WIRING GP-ELECTRONIC CONTROL
S/N CPT1-UP
PART OF 179-1797, 206-2745, 295-9745 ENGINE AR-PRIMARY
i02186805 SEBP3520
2580807 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4458 M [3] BOLT (M8X1.25X14-MM)  
2. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
3. 128-4249 [1] LOCKWASHER  
4. 140-8783 M [1] BOLT (M10X1.5X45-MM)  
5. 211-0052 [1] NUT (1-11/16-18-THD)  
6. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
7. 217-8477 [4] CLIP  
8. 217-9038 [3] BOLT (M4X0.7X14-MM)  
10. 226-8778 [1] BRACKET  
11. 226-8780 [1] BRACKET  
12. 228-7477 [1] CLIP  
13. 255-3454 [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
14. 258-0806 [1] PLATE  
  M   METRIC PART
 

#SEBP35200203
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N DJD1-2977; DBT1-1676
PART OF 176-5221, 204-4349 CHASSIS AR
i01774673 SEBP3520
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(START AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 3S-2093 [5] STRAP-CABLE  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(HEAD LAMP)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 [21] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8827 [5] BOOT (RED)  
7. 091-0081 [1] SPACER (10.5X20X10-MM THK)  
8. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
9. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING RELAY)  
10. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
11. 131-3201 [4] BOOT  
12. 134-2540 [1] RECEPTACLE AS-CONNECTOR  
13. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(ALTERNATOR)  
15. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(MAIN)  
16. 148-8298 [1] WIRE AS  
17. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
18. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
    (EACH CIRCUIT BREAKER AS INCLUDES)
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 224-9610 [1] HARNESS AS-ENGINE  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  3E-4367 [1] RING-RETAINING  
  9X-5615 [2] SEAL (INTERFACE, 70-PIN)  
  116-6158 [1] PLUG AS-CONNECTOR (2-PIN)  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  8T-8737 [58] PLUG-SEAL  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-7110 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  100-6674 [1] SEAL-CONNECTOR  
  7T-0094 [4] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1547 [1] SOCKET-CONNECTOR (6-GA)  
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  180-9340 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  6T-5598 [1] TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [3] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  9F-3965 [1] TERMINAL (6-GA, 1/4-IN SCREW)  
  2L-8067 [4] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8078 [2] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  281-4546 [1] TERMINAL-BLADE  
  9X-1056 [8] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(6-CM)  
20. 225-5224 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(20CM)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
21. 226-5923 [1] BRACKET  
22. 229-6257 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
23. 230-4927 [2] CLAMP-HALF  
24. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
25. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 [2] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [10] CLIP (LADDER)  
31. 4P-8134 [5] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-1889 [2] CLIP (LOOP)  
34. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
35. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
42. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
48. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
49. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
50. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
51. 8T-9534 M [2] BOLT (M6X1X50-MM)  
52. 9M-4972 [2] CLIP (LOOP)  
53. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35200204
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N DJD1-2675; DBT1-1676
PART OF 176-5221, 204-4349 CHASSIS AR
i02190526 SEBP3520
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(STARTING AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 3S-2093 [5] STRAP-CABLE  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(FLOODLIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 [21] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8827 C [4] BOOT (RED)  
7. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
8. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING RELAY)  
9. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
10. 131-3201 [4] BOOT  
11. 134-2540 [1] RECEPTACLE AS-CONNECTOR  
12. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(ALTERNATOR)  
14. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(MAIN)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 204-2281 C [3] STRAP-CABLE  
18. 225-5224 [1] CABLE AS  
  8C-3056 BE CABLE (2-GA, RED)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
19. 226-5923 [1] BRACKET  
20. 229-6257 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
21. 236-4236 C [1] HARNESS AS-ENGINE  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
22. 251-6182 C [1] WIRE AS  
23. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 204-8000 C [3] MOUNTING-CABLE TIE  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 [2] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [10] CLIP (LADDER)  
31. 4P-8134 [5] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
34. 8T-0269 CM [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
35. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
42. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4205 C [1] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
52. 9M-4972 [2] CLIP (LOOP)  
53. 9X-8256 C [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35200205
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N DJD2676-2688
PART OF 204-4349 CHASSIS AR
i02661695 SEBP3520
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP35200206
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N DJD2689-2977
PART OF 204-4349 CHASSIS AR
i02665334 SEBP3520
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP35200207
 

123-7333: WIRING GP-FRONT

123-7333 WIRING GP-FRONT
S/N DJD1-2977; DBT1-1676
PART OF 176-5221, 204-4349 CHASSIS AR
i01069332 SEBP3520
1237333 WIRING GP-FRONT Parts scheme 1237333 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [21] STRAP-CABLE  
2. 8T-8737 [8] PLUG-SEAL  
3. 163-1201 C [1] HORN AS (24-VOLT, LOW TONE)  
4. 176-0302 [1] HARNESS AS-FRONT (FRONT CHASSIS)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [11] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [9] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [30] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8L-8413 [12] STRAP-CABLE (WHITE)  
  1P-0810 B TAPE-ELECTRICAL  
  9X-0196 [2] TERMINAL AS (16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
  5P-0765 E HOSE (40-CM)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [6] PLUG-SEAL  
5. 194-4121 [4] SPACER (10.1X15.9X70-MM THK)  
6. 194-8111 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 194-8112 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
8. 194-8113 [2] PLATE  
9. 194-8114 [2] BLOCK  
10. 231-7994 [2] BLOCK  
11. 231-7995 [2] BLOCK  
12. 2H-9524 [2] GROMMET  
13. 102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
14. 4P-8134 [1] CLIP (LADDER)  
15. 7B-1251 [2] GROMMET  
16. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
18. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP35200208
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N DJD1-2174; DBT1-1676
PART OF 176-5221, 204-4349 CHASSIS AR
i01774687 SEBP3520
1808804 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [34] STRAP-CABLE  
2. 204-1370 [1] GASKET  
3. 224-9612 [1] HARNESS AS-REAR CHASSIS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
4. 132-5789 [2] CLIP (LADDER)  
5. 194-7265 [1] SENDER AS-FUEL LEVEL  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 4P-7581 [3] CLIP (LADDER)  
7. 4P-8134 [3] CLIP (LADDER)  
8. 5C-9553 M [8] BOLT (M6X1X16-MM)  
9. 5P-6264 [4] GROMMET  
10. 8D-9671 [1] CLIP  
11. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
13. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
14. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
   
  8T-4224 F [1] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP35200209
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N DJD2175-2977
PART OF 204-4349 CHASSIS AR
i02495259 SEBP3520
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Sensors and Electrical Connectors
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1894 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog IT28G :

WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-CAB
233-6563 WIRING GP-CAB
WIRING GP-CAB
233-6562 WIRING GP-CAB
WIRING GP-CAB
190-4340 WIRING GP-CAB
WIRING GP-CAB
190-4340 WIRING GP-CAB
WIRING GP-ALTERNATOR
252-4990 WIRING GP-ALTERNATOR
WARNING GP-BACKUP
180-8807 WARNING GP-BACKUP
SWITCH GP-WIPER
275-7741 SWITCH GP-WIPER
WIRING GP-ELECTRONIC CONTROL
219-2462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-FRONT
123-7333 WIRING GP-FRONT
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-RIDE CONTROL
215-2889 WIRING GP-RIDE CONTROL
WIRING GP-SECONDARY STEERING
180-8810 WIRING GP-SECONDARY STEERING

Truck sale:

Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
MILTON CAT
Caterpillar IT28G, Wheel Loaders, Construction
37,500 
Caterpillar IT28G, Wheel Loaders, Construction
- Wheel Loaders
OHIO CAT
Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
ZIEGLER CAT
 
48,707 
Caterpillar IT28G, Wheel Loaders, Construction


Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.