AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

184-1333 LINES GP-FUEL -WATER SEPARATOR S/N WAC1-UP; WLG1-UP PART OF 176-5231, 176-5251 CHASSIS AR IT28G


FUEL SYSTEM
LINES GP-FUEL
PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER

INTEGRATED TOOLCARRIER IT28G INTEGRATED TOOLCARRIER WAC
 928G Wheel Loader and IT28G Integrated Toolcarrier WAC00001-UP (MACHINE) POWERED BY 3056E Engine SEBP3521 IT28G WAC   (2001)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FUEL
184-1333 LINES GP-FUEL
LINES GP-FUEL
233-2483 LINES GP-FUEL
 

#SEBP35210110
 

184-1333: LINES GP-FUEL

184-1333 LINES GP-FUEL -WATER SEPARATOR
S/N WAC1-UP; WLG1-UP
PART OF 176-5231, 176-5251 CHASSIS AR
i01814705 SEBP3521
1841333 LINES GP-FUEL Parts scheme 1841333 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4278 [4] CLAMP-HOSE  
2. 6G-2263 [2] SPACER (10.5X19X28.5-MM THK)  
3. 032-8100 [2] WASHER (0.531X0.718X0.064-IN THK)  
4. 033-7849 [2] PLUG  
5. 067-6269 [2] FERRULE  
6. 122-4873 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 152-0983 [2] TUBE AS  
8. 219-8604 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
9. 220-1865 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 220-5557 Y [1] SEPARATOR GP-WATER (PRIMARY FUEL FILTER)  
11. 226-9424 [2] GROMMET  
12. 4D-6466 [2] CLIP  
13. 164-4225 [2] CLIP  
14. 6D-3479 [2] CLIP (LOOP)  
15. 7X-7729 [4] WASHER (11X25X3-MM THK)  
16. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
19. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
20. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
21. 8C-3681 E HOSE (80-CM)  
22. 5P-1420 E HOSE (177-CM)  
22A. 5P-1420 E HOSE (177.5-CM)  
22B. 5P-1420 E HOSE (150-CM)  
23. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
24. 5P-4961 [2] CLAMP-HOSE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35210111
 

233-2483: LINES GP-FUEL

233-2483 LINES GP-FUEL
S/N CPT1-UP
PART OF 179-1797, 206-2745, 295-9745, 295-9748, 309-8008 ENGINE AR-PRIMARY
AN ATTACHMENT
i01931717 SEBP3521
2332483 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [1] NUT  
2. 067-6269 [1] FERRULE  
3. 232-3368 [1] TUBE AS (DRAIN)  
4. 233-2485 [1] LINE AS-FUEL  
4A. 067-6268 [1] NUT-FUEL LINE  
4B. 067-6269 [1] FERRULE  
 

#SEBP35210112
 

235-6331: PUMP GP-FUEL INJECTION

235-6331 PUMP GP-FUEL INJECTION
S/N CPT1-10865
PART OF 179-1797, 206-2745, 295-9745, 295-9748, 309-8008 ENGINE AR-PRIMARY
AN ATTACHMENT
i01990018 SEBP3521
2356331 PUMP GP-FUEL INJECTION Parts scheme 2356331 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [8] NUT (M8X1.25-THD)  
4. 7M-7410 [1] PLUG-PIPE  
5. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 103-1074 [1] STUD  
8. 114-4363 M [3] BOLT (M8X1.25X12-MM)  
9. 124-3708 [3] CLIP  
10. 145-8327 [1] SEAL-O-RING  
11. 147-5551 [2] STUD  
12. 149-2091 [1] SEAL-O-RING  
13. 155-0576 [5] MOUNT-ISOLATION  
14. 162-9992 [3] CLIP  
15. 164-3207 [6] WASHER  
16. 179-7071 [4] BOLT (M8X1.25X20-MM)  
17. 199-9252 [1] SEAL-O-RING  
18. 199-9267 [1] SEAL-O-RING  
19. 199-9751 [2] SEAL-O-RING  
20. 270-5322 [1] CONTROL GP-VOLTAGE (24-VOLT)(LOAD PROTECTION)  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  1S-9593 [2] STRAP-CABLE  
21. 216-3436 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
22. 216-3436 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
23. 216-3446 [1] SENSOR GP-SPEED (TIMING)  
24. 216-3448 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
25. 216-3450 [1] SENSOR GP-PRESSURE (BOOST)  
26. 216-9786 [6] INJECTOR AS-FUEL  
27. 216-9790 [1] GEAR-FUEL PUMP (68-TEETH)  
28. 216-9824 [1] PUMP GP-FUEL INJECTION  
29. 216-9826 [1] TUBE AS (CYL NO. 1)  
30. 216-9828 [1] TUBE AS (CYL NO. 2)  
31. 216-9830 [1] TUBE AS (CYL NO. 3)  
32. 216-9831 [1] TUBE AS (CYL NO. 4)  
33. 216-9834 [1] TUBE AS (CYL NO. 5)  
34. 216-9835 [1] TUBE AS (CYL NO. 6)  
35. 217-0099 [7] SPACER (8.2X25X2-MM THK)  
36. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
37. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
38. 228-8943 [1] BRACKET  
39. 228-8956 [1] BRACKET  
40. 228-8960 [1] CLIP  
41. 235-5917 [1] STUD  
42. 235-6281 [1] TIE-CABLE  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP35210113
 

235-6331: PUMP GP-FUEL INJECTION

235-6331 PUMP GP-FUEL INJECTION
S/N CPT10866-UP
PART OF 179-1797, 295-9745, 295-9748, 309-8008 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
i03741864 SEBP3521
2356331 PUMP GP-FUEL INJECTION Parts scheme 2356331 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [8] NUT (M8X1.25-THD)  
4. 7M-7410 [1] PLUG-PIPE  
5. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 103-1074 [1] STUD  
8. 114-4363 M [3] BOLT (M8X1.25X12-MM)  
9. 124-3708 [3] CLIP  
10. 145-8327 [1] SEAL-O-RING  
11. 147-5551 [2] STUD  
12. 149-2091 [1] SEAL-O-RING  
13. 300-6714 [5] MOUNT  
14. 162-9992 [3] CLIP  
15. 140-8718 [6] WASHER  
16. 179-7071 [4] BOLT (M8X1.25X20-MM)  
17. 199-9252 [1] SEAL-O-RING  
18. 199-9267 [1] SEAL-O-RING  
19. 199-9751 [2] SEAL-O-RING  
20. 270-5322 [1] CONTROL GP-VOLTAGE (24-VOLT)(LOAD PROTECTION)  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  1S-9593 [2] STRAP-CABLE  
21. 268-4360 C [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
21A. 268-4360 C [1] SENSOR GP-TEMPERATURE (AIR INLET)  
22. 235-6281 [1] TIE-CABLE  
23. 216-3446 [1] SENSOR GP-SPEED (TIMING)  
24. 274-6721 C [1] SENSOR GP-PRESSURE (ENGINE OIL)  
25. 274-6720 C [1] SENSOR GP-PRESSURE (BOOST)  
26. 216-9786 [6] INJECTOR AS-FUEL  
27. 216-9790 [1] GEAR-FUEL PUMP (68-TEETH)  
28. 216-9824 [1] PUMP GP-FUEL INJECTION  
29. 216-9826 [1] TUBE AS (CYL NO. 1)  
30. 216-9828 [1] TUBE AS (CYL NO. 2)  
31. 216-9830 [1] TUBE AS (CYL NO. 3)  
32. 216-9831 [1] TUBE AS (CYL NO. 4)  
33. 216-9834 [1] TUBE AS (CYL NO. 5)  
34. 216-9835 [1] TUBE AS (CYL NO. 6)  
35. 217-0099 [7] SPACER (8.2X25X2-MM THK)  
36. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
37. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
38. 228-8943 [1] BRACKET  
39. 228-8956 [1] BRACKET  
40. 228-8960 [1] CLIP  
41. 235-5917 [1] STUD  
   
    AVAILABLE REPAIR KIT(S):
  278-8678 C KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  278-8682 C KIT-SENSOR (AIR PRESSURE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP35210114
 

235-6331: PUMP GP-FUEL INJECTION

235-6331 PUMP GP-FUEL INJECTION
S/N CPT10866-UP
PART OF 179-1797, 295-9745, 295-9748, 309-8008 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
i05420209 SEBP3521
2356331 PUMP GP-FUEL INJECTION Parts scheme 2356331 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [8] NUT (M8X1.25-THD)  
4. 7M-7410 [1] PLUG-PIPE  
5. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 103-1074 [1] STUD  
8. 114-4363 M [3] BOLT (M8X1.25X12-MM)  
9. 124-3708 [3] CLIP  
10. 145-8327 [1] SEAL-O-RING  
11. 147-5551 [2] STUD  
12. 149-2091 [1] SEAL-O-RING  
13. 300-6714 [5] MOUNT  
14. 162-9992 [3] CLIP  
15. 140-8718 [6] WASHER  
16. 179-7071 [4] BOLT (M8X1.25X20-MM)  
17. 199-9252 [1] SEAL-O-RING  
18. 199-9267 [1] SEAL-O-RING  
19. 199-9751 [2] SEAL-O-RING  
20. 396-6500 CY [1] CONTROL GP-ELECTRONIC (24-VOLT)(LOAD PROTECTION)  
21. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
21A. 268-4360 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
22. 235-6281 [1] TIE-CABLE  
23. 216-3446 [1] SENSOR GP-SPEED (TIMING)  
24. 274-6721 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
25. 274-6720 [1] SENSOR GP-PRESSURE (BOOST)  
26. 216-9786 [6] INJECTOR AS-FUEL  
27. 216-9790 [1] GEAR-FUEL PUMP (68-TEETH)  
28. 216-9824 [1] PUMP GP-FUEL INJECTION  
29. 216-9826 [1] TUBE AS (CYL NO. 1)  
30. 216-9828 [1] TUBE AS (CYL NO. 2)  
31. 216-9830 [1] TUBE AS (CYL NO. 3)  
32. 216-9831 [1] TUBE AS (CYL NO. 4)  
33. 216-9834 [1] TUBE AS (CYL NO. 5)  
34. 216-9835 [1] TUBE AS (CYL NO. 6)  
35. 217-0099 [7] SPACER (8.2X25X2-MM THK)  
36. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
37. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
38. 228-8943 [1] BRACKET  
39. 228-8956 [1] BRACKET  
40. 228-8960 [1] CLIP  
41. 235-5917 [1] STUD  
   
    AVAILABLE REPAIR KIT(S):
  278-8678 KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  278-8682 KIT-SENSOR (AIR PRESSURE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35210115
 

249-2897: PUMP GP-FUEL INJECTION

249-2897 PUMP GP-FUEL INJECTION
S/N CPT1-UP
PART OF 179-1797, 206-2745 ENGINE AR-PRIMARY
AN ATTACHMENT
i02022567 SEBP3521
2492897 PUMP GP-FUEL INJECTION Parts scheme 2492897 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [8] NUT (M8X1.25-THD)  
4. 7M-7410 [1] PLUG-PIPE  
5. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 103-1074 [1] STUD  
8. 114-4363 M [3] BOLT (M8X1.25X12-MM)  
9. 124-3708 [3] CLIP  
10. 145-8327 [1] SEAL-O-RING  
11. 147-5551 [2] STUD  
12. 149-2091 [1] SEAL-O-RING  
13. 155-0576 [5] MOUNT-ISOLATION  
14. 162-9992 [3] CLIP  
15. 164-3207 [6] WASHER  
16. 179-7071 [4] BOLT (M8X1.25X20-MM)  
17. 199-9252 [1] SEAL-O-RING  
18. 199-9267 [1] SEAL-O-RING  
19. 199-9751 [2] SEAL-O-RING  
20. 270-5322 [1] CONTROL GP-VOLTAGE (24-VOLT)(LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
21. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
22. 268-4360 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
23. 216-3446 [1] SENSOR GP-SPEED (TIMING)  
24. 216-3448 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
25. 216-3450 [1] SENSOR GP-PRESSURE (BOOST)  
26. 216-9786 [6] INJECTOR AS-FUEL  
27. 216-9790 [1] GEAR-FUEL PUMP (68-TEETH)  
28. 216-9824 [1] PUMP GP-FUEL INJECTION  
29. 216-9826 [1] TUBE AS (CYL NO. 1)  
30. 216-9828 [1] TUBE AS (CYL NO. 2)  
31. 216-9830 [1] TUBE AS (CYL NO. 3)  
32. 216-9831 [1] TUBE AS (CYL NO. 4)  
33. 216-9834 [1] TUBE AS (CYL NO. 5)  
34. 216-9835 [1] TUBE AS (CYL NO. 6)  
35. 217-0099 [7] SPACER (8.2X25X2-MM THK)  
36. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
37. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
38. 228-8943 [1] BRACKET  
39. 228-8956 [1] BRACKET  
40. 228-8960 [1] CLIP  
41. 235-5917 [1] STUD  
42. 235-6281 [1] TIE-CABLE  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP35210116
 

219-2455: PUMP GP-FUEL TRANSFER

219-2455 PUMP GP-FUEL TRANSFER
S/N CPT1-UP
PART OF 179-1797, 206-2745 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
i01725065 SEBP3521
2192455 PUMP GP-FUEL TRANSFER Parts scheme 2192455 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [5] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
5. 033-7849 [1] PLUG  
6. 067-6269 [4] FERRULE  
7. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
8. 101-3906 [1] BOLT  
9. 101-3907 [2] WASHER  
10. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
11. 102-9988 [1] SPACER  
12. 127-8162 [1] CLIP  
13. 162-2000 [1] WASHER  
14. 216-9043 [1] PUMP AS-FUEL TRANSFER  
14A. 231-4457 [1] GASKET  
15. 216-9053 [1] CONNECTOR  
16. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
17. 216-9092 [1] CONNECTOR-SPECIAL (BANJO)  
18. 216-9752 [4] WASHER  
19. 217-0721 [1] BOLT-SPECIAL (BANJO)  
20. 219-2443 [1] TUBE AS  
20A. 102-9986 [1] CLIP  
20B. 067-6268 [1] NUT-FUEL LINE  
20C. 067-6269 [1] FERRULE  
21. 219-2450 [1] BRACKET  
22. 219-2451 [1] CONNECTOR-SPECIAL (BANJO)  
23. 219-2452 [1] BALL  
24. 219-2453 [1] TUBE AS  
24A. 149-6117 [1] CLIP  
25. 223-5418 [1] TUBE AS  
25A. 067-6268 [2] NUT-FUEL LINE  
25B. 067-6269 [2] FERRULE  
25C. 102-9986 [1] CLIP  
25D. 102-9987 [1] CLIP  
  M   METRIC PART
 

#SEBP35210117
 

219-2455: PUMP GP-FUEL TRANSFER

219-2455 PUMP GP-FUEL TRANSFER
S/N CPT1-UP
PART OF 179-1797, 206-2745, 295-9745, 295-9748, 309-8008 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
i02062558 SEBP3521
2192455 PUMP GP-FUEL TRANSFER Parts scheme 2192455 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 C [3] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
5. 033-7849 [1] PLUG  
6. 067-6269 C [3] FERRULE  
7. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
8. 101-3906 [1] BOLT  
9. 101-3907 [2] WASHER  
10. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
11. 102-9988 [1] SPACER  
12. 127-8162 [1] CLIP  
13. 162-2000 [1] WASHER  
14. 216-9043 [1] PUMP AS-FUEL TRANSFER  
14A. 231-4457 [1] GASKET  
15. 216-9053 [1] CONNECTOR  
16. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
17. 216-9092 [2] CONNECTOR-SPECIAL (BANJO)  
18. 216-9752 [4] WASHER  
19. 217-0721 [1] BOLT-SPECIAL (BANJO)  
20. 219-2443 [1] TUBE AS  
20A. 102-9986 [1] CLIP  
20B. 067-6268 [1] NUT-FUEL LINE  
20C. 067-6269 [1] FERRULE  
21. 219-2450 [1] BRACKET  
24. 219-2453 [1] TUBE AS  
24A. 149-6117 [1] CLIP  
25. 223-5418 [1] TUBE AS  
25A. 067-6268 [2] NUT-FUEL LINE  
25B. 067-6269 [2] FERRULE  
25C. 102-9986 [1] CLIP  
25D. 102-9987 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP35210118
 

233-2638: PUMP GP-FUEL TRANSFER

233-2638 PUMP GP-FUEL TRANSFER
S/N CPT1-1190
PART OF 179-1797 ENGINE AR-PRIMARY
AN ATTACHMENT
i01931716 SEBP3521
2332638 PUMP GP-FUEL TRANSFER Parts scheme 2332638 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [6] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-0654 M [2] BOLT (M10X1.5X25-MM)  
5. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
6. 033-7849 [1] PLUG  
7. 067-6269 [5] FERRULE  
8. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
9. 101-3906 [1] BOLT  
10. 101-3907 [2] WASHER  
11. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
12. 102-9988 [1] SPACER  
13. 162-2000 [1] WASHER  
14. 216-9043 [1] PUMP AS-FUEL TRANSFER  
14A. 231-4457 [1] GASKET  
15. 216-9053 [1] CONNECTOR  
16. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
17. 216-9092 [1] CONNECTOR-SPECIAL (BANJO)  
18. 216-9752 [4] WASHER  
19. 217-0721 [1] BOLT-SPECIAL (BANJO)  
20. 219-2443 [1] TUBE AS  
20A. 067-6268 [1] NUT-FUEL LINE  
20B. 067-6269 [1] FERRULE  
20C. 102-9986 [1] CLIP  
21. 219-2450 [1] BRACKET  
22. 219-2451 [1] CONNECTOR-SPECIAL (BANJO)  
23. 219-2452 [1] BALL  
24. 219-2453 [1] TUBE AS  
24A. 149-6117 [1] CLIP  
25. 223-5418 [1] TUBE AS  
25A. 067-6268 [2] NUT-FUEL LINE  
25B. 067-6269 [2] FERRULE  
25C. 102-9986 [1] CLIP  
25D. 102-9987 [1] CLIP  
26. 232-3368 [1] TUBE AS  
  M   METRIC PART
 

#SEBP35210119
 

220-5557: SEPARATOR GP-WATER

220-5557 SEPARATOR GP-WATER -PRIMARY FUEL FILTER
S/N WAC1-UP; WLG1-UP
WITH BOWL
PART OF 184-1333 LINES GP-FUEL
i01814753 SEBP3521
2205557 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-9401 [1] BOWL AS-WATER COLLECTION  
  128-8614 [1] KIT-SEAL (WATER SEPARATOR)  
    (INCLUDES SEALS)
2. 118-8118 [1] RING-RETAINING  
3. 118-8119 [1] NUT  
4. 121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)  
    (INCLUDES CAP NUT, HEADER CAP, CAP SEAL, VOLUME PLUG, O-RING SEAL, VENT PLUG, DUST SEAL & RETAINER RING)
5. 131-1812 [1] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
 

Information:

Specifications
Fuel Lines
3056E Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Caterpillar Parts SIS Catalog IT28G :

FILTER GP-FUEL
235-6347 FILTER GP-FUEL
BASE GP-FUEL FILTER
141-7844 BASE GP-FUEL FILTER
TURBOCHARGER GP
235-9700 TURBOCHARGER GP
PRECLEANER GP
121-7746 PRECLEANER GP
MUFFLER GP
264-6819 MUFFLER GP
MUFFLER GP
264-6819 MUFFLER GP
MUFFLER GP
200-5712 MUFFLER GP
MUFFLER GP
186-2344 MUFFLER GP
LINES GP-FUEL
233-2483 LINES GP-FUEL
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
249-2897 PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
219-2455 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
219-2455 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
233-2638 PUMP GP-FUEL TRANSFER

Truck sale:

Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
MILTON CAT
Caterpillar IT28G, Wheel Loaders, Construction
37,500 
Caterpillar IT28G, Wheel Loaders, Construction
- Wheel Loaders
OHIO CAT
Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
ZIEGLER CAT
 
48,707 
Caterpillar IT28G, Wheel Loaders, Construction


Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.