AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

180-8801 WIRING GP-ENGINE S/N WAC1-UP; WLG1-UP PART OF 176-5231, 176-5251 CHASSIS AR IT28G INTEGRATED TOOLCARRIER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

ELECTRICAL AND STARTING SYSTEM
WIRING GP


INTEGRATED TOOLCARRIER IT28G INTEGRATED TOOLCARRIER WAC
 928G Wheel Loader and IT28G Integrated Toolcarrier WAC00001-UP (MACHINE) POWERED BY 3056E Engine SEBP3521 IT28G WAC   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ELECTRONIC CONTROL
219-2462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-FRONT
123-7333 WIRING GP-FRONT
WIRING GP-PLATFORM
189-4775 WIRING GP-PLATFORM
 

#SEBP35210230
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N WAC1-UP; WLG1-UP
PART OF 176-5231, 176-5251 CHASSIS AR
i01814220 SEBP3521
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(START AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 3S-2093 [5] STRAP-CABLE  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(FLOODLIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 [21] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8827 [5] BOOT (RED)  
7. 091-0081 [1] SPACER (10.5X20X10-MM THK)  
8. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
9. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING RELAY)  
10. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
11. 131-3201 [4] BOOT  
12. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
13. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(ALTERNATOR)  
15. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(MAIN)  
16. 148-8298 [1] WIRE AS  
17. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
18. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
    (EACH CIRCUIT BREAKER AS INCLUDES)
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 224-9610 [1] HARNESS AS-ENGINE  
  8C-3056 E CABLE (2-GA, RED)(380-CM)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  3E-4367 [1] RING-RETAINING  
  9X-5615 [2] SEAL (INTERFACE, 70-PIN)  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  8T-8737 [58] PLUG-SEAL  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-7110 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  100-6674 [1] SEAL-CONNECTOR  
  7T-0094 [4] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1547 [1] SOCKET-CONNECTOR (6-GA)  
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  180-9340 [50] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  6T-5598 [1] TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [3] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  9F-3965 [1] TERMINAL (6-GA, 1/4-IN SCREW)  
  2L-8067 [4] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8078 [2] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  281-4546 [1] TERMINAL-BLADE  
  9X-1056 [8] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  [1] TERMINAL AS  
  9F-3965 [1] TERMINAL (6-GA, 1/4-IN SCREW)  
  8T-5346 E TUBE-HEAT SHRINK (19.1-MM DIA)(4-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(6-CM)  
20. 225-5224 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(20CM)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
21. 226-5923 [1] BRACKET  
22. 229-6257 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
23. 230-4927 [2] CLAMP-HALF  
24. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
25. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 [2] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [10] CLIP (LADDER)  
31. 4P-8134 [5] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-1889 [2] CLIP (LOOP)  
34. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
35. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
42. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
48. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
49. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
50. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
51. 8T-9534 M [2] BOLT (M6X1X50-MM)  
52. 9M-4972 [2] CLIP (LOOP)  
53. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35210231
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N WAC1-UP; WLG1-1044
PART OF 176-5231, 176-5251 CHASSIS AR
i02284088 SEBP3521
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(START AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 3S-2093 [5] STRAP-CABLE  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(HEADLIGHT)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 [21] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8827 C [4] BOOT (RED)  
7. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
8. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
9. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
10. 131-3201 [4] BOOT  
11. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
12. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
14. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 204-2281 C [3] STRAP-CABLE  
18. 225-5224 [1] CABLE AS  
  8C-3056 BE CABLE (2-GA, RED)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
19. 226-5923 [1] BRACKET  
20. 229-6257 [1] PLATE AS  
21. 236-4236 C [1] HARNESS AS-ENGINE  
  8C-3056 E CABLE (2-GA, RED)(164-CM)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  180-9339 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-8737 [21] PLUG-SEAL  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  180-7110 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  100-6674 [4] SEAL-CONNECTOR  
  180-9340 [50] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9W-0844 [7] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  7T-0094 [5] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1547 [1] SOCKET-CONNECTOR (6-GA)  
  124-5640 [2] TERMINAL-SOCKET  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [3] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  [1] TERMINAL AS  
  9F-3965 [1] TERMINAL (6-GA, 1/4-IN SCREW)  
  2L-8078 [2] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  9X-1056 [8] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(6-CM)  
22. 251-6182 C [1] WIRE AS  
23. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 204-8000 C [3] MOUNTING-CABLE TIE  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 [2] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [10] CLIP (LADDER)  
31. 4P-8134 [5] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
34. 8T-0269 CM [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
35. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
42. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4205 C [1] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
52. 9M-4972 [2] CLIP (LOOP)  
53. 9X-8256 C [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35210232
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N WLG1045-1060
PART OF 176-5251 CHASSIS AR
i02661700 SEBP3521
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP35210233
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N WLG1061-UP
PART OF 176-5251 CHASSIS AR
i02665301 SEBP3521
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP35210234
 

123-7333: WIRING GP-FRONT

123-7333 WIRING GP-FRONT
S/N WAC1-UP; WLG1-UP
PART OF 176-5231, 176-5251 CHASSIS AR
i00515025 SEBP3521
1237333 WIRING GP-FRONT Parts scheme 1237333 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [21] STRAP-CABLE  
2. 8T-8737 [8] PLUG-SEAL  
3. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
4. 176-0302 [1] HARNESS AS-FRONT (FRONT CHASSIS)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  8T-8737 [6] PLUG-SEAL  
5. 194-4121 [4] SPACER (10.1X15.9X70-MM THK)  
6. 194-8111 [1] PLATE AS  
7. 194-8112 [1] PLATE AS  
8. 194-8113 [2] PLATE  
9. 194-8114 [2] BLOCK  
10. 231-7994 [2] BLOCK  
11. 231-7995 [2] BLOCK  
12. 2H-9524 [2] GROMMET  
13. 102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 4P-8134 [1] CLIP (LADDER)  
15. 7B-1251 [2] GROMMET  
16. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
18. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
  M   METRIC PART
 

#SEBP35210235
 

189-4775: WIRING GP-PLATFORM

189-4775 WIRING GP-PLATFORM
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR
Type 1
AN ATTACHMENT
i01821298 SEBP3521
1894775 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5298 [1] WIRE AS  
2. 7K-1181 B [4] STRAP-CABLE  
3. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING LAMP)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 110-6109 [1] KNOB-CONTROL (CONTROL PANEL SWITCHES)  
5. 111-7899 B [4] GASKET  
6. 115-1748 [2] LAMP (24-VOLT, 3-WATT)  
7. 165-0311 B [4] PLUG  
8. 185-2766 [1] SWITCH AS-ROCKER (AUTOSHIFT CONTROL)  
  111-7899 [1] GASKET  
9. 185-2769 [1] SWITCH AS-ROCKER (XMSN NEUTRALIZER OVERRIDE CONT)  
  111-7899 [1] GASKET  
10. 189-6140 [1] HARNESS AS-PANEL  
  142-9117 [6] CONNECTOR (10-PIN)  
  5P-6271 [1] CONNECTOR AS  
  144-1636 [37] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2265 [3] KIT-CONNECTING PLUG (8-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACLE SEAL)
  8T-8737 [4] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  126-1768 [30] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  113-5183 [4] SOCKET-LAMP  
  8L-8413 [21] STRAP-CABLE (WHITE)  
  122-4401 [20] TERMINAL  
  5P-2321 [2] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  104-1995 [19] TERMINAL-BLADE (14-GA TO 18-GA)  
  113-5184 [8] TERMINAL-RECEPTACLE (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
11. 190-4558 [1] PLATE AS  
12. 190-4559 [1] PLATE AS  
13. 201-1024 [1] BRACKET  
14. 202-1129 M [8] SCREW-TRUSS HEAD (M4X0.7X18-MM)  
15. 204-0357 [1] FILM-IDENTIFICATION (PANEL, LH)  
16. 204-0359 [1] FILM-PANEL (RH)  
17. 211-0052 [1] NUT (1-11/16-18-THD)  
18. 4P-7581 [1] CLIP (LADDER)  
19. 4P-8134 [1] CLIP (LADDER)  
20. 6D-4244 [1] CLIP (LOOP)  
21. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
22. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
23. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
24. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP35210236
 

189-4775: WIRING GP-PLATFORM

189-4775 WIRING GP-PLATFORM
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR
Type 2
AN ATTACHMENT
i02183779 SEBP3521
1894775 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [4] STRAP-CABLE  
2. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 110-6109 [1] KNOB-CONTROL (CONTROL PANEL SWITCHES)  
4. 115-1748 [2] LAMP (24-VOLT, 3-WATT)  
5. 165-0311 B [4] PLUG  
6. 165-0312 B [1] WIRE AS (18-GA)  
7. 185-2766 [1] SWITCH AS-ROCKER (AUTOSHIFT CONTROL)  
  111-7899 [1] GASKET  
8. 185-2769 [1] SWITCH AS-ROCKER (XMSN NEUTRALIZER OVERRIDE CONT)  
  111-7899 [1] GASKET  
9. 190-4558 [1] PLATE AS  
10. 190-4559 [1] PLATE AS  
11. 201-1024 [1] BRACKET  
12. 202-1129 M [8] SCREW-TRUSS HEAD (M4X0.7X18-MM)  
13. 204-0357 [1] FILM-IDENTIFICATION (PANEL, LH)  
14. 204-0359 [1] FILM-PANEL (RH)  
15. 211-0052 [1] NUT (1-11/16-18-THD)  
16. 251-2367 [1] HARNESS AS-PANEL (INSTRUMENT)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [35] STRAP-CABLE (WHITE)  
  5P-6271 [1] CONNECTOR AS  
  091-2436 [23] TERMINAL-BLADE (18-GA TO 22-GA)  
  104-1995 [10] TERMINAL-BLADE (14-GA TO 18-GA)  
  113-5183 [4] SOCKET-LAMP  
  113-5184 [8] TERMINAL-RECEPTACLE (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  122-4401 [15] TERMINAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  128-7875 E PLATE & FILM GP (10-CM)  
  141-8061 D TAPE (1-M)  
  142-9117 [7] CONNECTOR (10-PIN)  
  155-2265 [3] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  167-3692 [1] RECEPTACLE AS-CONNECTOR (31-PIN)  
17. 4P-7581 [1] CLIP (LADDER)  
18. 4P-8134 [1] CLIP (LADDER)  
19. 6D-4244 [1] CLIP (LOOP)  
20. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
21. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
22. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
23. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
24. 5P-6038 BD WRAP (SPIRAL)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP35210237
 

189-4775: WIRING GP-PLATFORM

189-4775 WIRING GP-PLATFORM
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR
Type 3
AN ATTACHMENT
i02531308 SEBP3521
1894775 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [4] STRAP-CABLE  
2. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 110-6109 [1] KNOB-CONTROL (CONTROL PANEL SWITCHES)  
4. 115-1748 [2] LAMP (24-VOLT, 3-WATT)  
5. 165-0311 B [4] PLUG  
6. 165-0312 B [1] WIRE AS (18-GA)  
7. 185-2766 [1] SWITCH AS-ROCKER (AUTOSHIFT CONTROL)  
  111-7899 [1] GASKET  
8. 250-8115 C [1] SWITCH AS-ROCKER (XMSN NEUTRALIZER OVERRIDE CONT)  
  111-7899 [1] GASKET  
9. 190-4558 [1] PLATE AS  
10. 190-4559 [1] PLATE AS  
11. 201-1024 [1] BRACKET  
12. 202-1129 M [8] SCREW-TRUSS HEAD (M4X0.7X18-MM)  
13. 204-0357 [1] FILM-IDENTIFICATION (PANEL, LH)  
14. 204-0359 [1] FILM-PANEL (RH)  
15. 211-0052 [1] NUT (1-11/16-18-THD)  
16. 251-2367 [1] HARNESS AS-PANEL (INSTRUMENT)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [35] STRAP-CABLE (WHITE)  
  5P-6271 [1] CONNECTOR AS  
  091-2436 [23] TERMINAL-BLADE (18-GA TO 22-GA)  
  104-1995 [10] TERMINAL-BLADE (14-GA TO 18-GA)  
  113-5183 [4] SOCKET-LAMP  
  113-5184 [8] TERMINAL-RECEPTACLE (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  122-4401 [15] TERMINAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  128-7875 E PLATE & FILM GP (10-CM)  
  141-8061 D TAPE (1-M)  
  142-9117 [7] CONNECTOR (10-PIN)  
  155-2265 [3] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  167-3692 [1] RECEPTACLE AS-CONNECTOR (31-PIN)  
17. 4P-7581 [1] CLIP (LADDER)  
18. 4P-8134 [1] CLIP (LADDER)  
19. 6D-4244 [1] CLIP (LOOP)  
20. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
21. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
22. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
23. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
24. 5P-6038 BD WRAP (SPIRAL)  
25. 204-6101 [8] WASHER-HARD (5.3X10X1-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP35210238
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N WAC1-UP; WLG1-907
PART OF 176-5231, 176-5251 CHASSIS AR
i01814226 SEBP3521
1808804 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [34] STRAP-CABLE  
2. 204-1370 [1] GASKET  
3. 224-9612 [1] HARNESS AS-REAR CHASSIS  
  144-1636 [25] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  225-3854 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-8737 [30] PLUG-SEAL  
  102-8802 [6] KIT-RECEPTACLE (2-PIN)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  126-1768 [28] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
4. 132-5789 [2] CLIP (LADDER)  
5. 194-7265 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 4P-7581 [3] CLIP (LADDER)  
7. 4P-8134 [3] CLIP (LADDER)  
8. 5C-9553 M [8] BOLT (M6X1X16-MM)  
9. 5P-6264 [4] GROMMET  
10. 8D-9671 [1] CLIP  
11. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
13. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
14. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
   
  8T-4224 F [1] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP35210239
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N WLG908-UP
PART OF 176-5251 CHASSIS AR
i02484396 SEBP3521
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Sensors and Electrical Connectors
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1894 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog IT28G :

WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
219-2462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-CAB
190-4340 WIRING GP-CAB
WIRING GP-CAB
190-4340 WIRING GP-CAB
WIRING GP-CAB
190-4330 WIRING GP-CAB
WIRING GP-CAB
190-4330 WIRING GP-CAB
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-FRONT
123-7333 WIRING GP-FRONT
WIRING GP-PLATFORM
189-4775 WIRING GP-PLATFORM
WIRING GP-PLATFORM
189-4775 WIRING GP-PLATFORM
WIRING GP-PLATFORM
189-4775 WIRING GP-PLATFORM
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-RIDE CONTROL
215-2889 WIRING GP-RIDE CONTROL
WIRING GP-SECONDARY STEERING
180-8810 WIRING GP-SECONDARY STEERING

Truck sale:

Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
MILTON CAT
Caterpillar IT28G, Wheel Loaders, Construction
37,500 
Caterpillar IT28G, Wheel Loaders, Construction
- Wheel Loaders
OHIO CAT
Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
ZIEGLER CAT
 
48,707 
Caterpillar IT28G, Wheel Loaders, Construction


Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.