203-5929 HYDRAULIC AR-4 VALVE -4-LEVER S/N WAC1-UP AN ATTACHMENT IT28G INTEGRATED TOOLCARRIER

Part No	Qty	Parts name
219-4788 Y	[1]	CONTROL GP-PILOT OPERATED HYD (4-FUNCTION)
122-6337 Y	[1]	LINES GP-FRONT (FOURTH FUNCTION)
188-2865 Y	[1]	LINES GP-FRONT (THIRD FUNCTION)
122-6338 Y	[1]	LINES GP-LIFT CYLINDER
203-5926 Y	[1]	LINES GP-PILOT
122-6322 Y	[1]	LINES GP-TILT CYLINDER
122-6330 Y	[1]	VALVE & MTG GP-MAIN CONTROL (4-FUNCTION)
Y		SEPARATE ILLUSTRATION

#SEBP35210531

214-7726: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

214-7726 HYDRAULIC AR-4 VALVE -3-LEVER
S/N WLG1-UP
AN ATTACHMENT

i01827071 SEBP3521

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name	Comments

#SEBP35210532

113-3652: KICKOUT & POSITIONER GP

KICKOUT & POSITIONER GP

113-3652 KICKOUT & POSITIONER GP
S/N WLG1-915
PART OF 176-5242 HYDRAULIC AR

i01077584 SEBP3521

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name	Comments

#SEBP35210533

113-3652: KICKOUT & POSITIONER GP

KICKOUT & POSITIONER GP

113-3652 KICKOUT & POSITIONER GP
S/N WLG916-UP
PART OF 176-5242 HYDRAULIC AR

i02492913 SEBP3521

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name	Comments

#SEBP35210534

122-6490: KICKOUT & POSITIONER GP

KICKOUT & POSITIONER GP

122-6490 KICKOUT & POSITIONER GP
S/N WAC1-UP
PART OF 176-5222 HYDRAULIC AR

i01075147 SEBP3521

1226490 KICKOUT & POSITIONER GP Parts scheme

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name
1.	3E-7844 Y	[1]	CONTROL GP-LIFT KICKOUT (LIFT)
2.	9X-2132	[1]	RETAINER
3.	5G-7820	[1]	MAGNET AS
4.	7K-1181	[10]	STRAP-CABLE
5.	7V-5626	[6]	CLAMP
6.	7V-5628	[2]	PLATE (TOP)
7.	8T-4224	[9]	WASHER-HARD (8.8X16X2-MM THK)
8.	3E-7843 CY	[2]	CONTROL GP-POSITION
9.	161-5922	[1]	PLATE AS
10.	121-7981	[1]	SHAFT AS
11.	121-7983	[1]	TUBE
12.	122-6493	[1]	PLATE AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
13.	134-4630	[2]	CLAMP
14.	109-1297	[2]	CLAMP
15.	136-4794	[1]	PLATE AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
16.	137-2135	[1]	PLATE AS
	7T-1099	[2]	LINK
17.	138-6792	[1]	PLATE
18.	164-4927	[1]	HARNESS AS-WIRING (KICKOUT, POSITIONER)
	9X-2384 G		HOSE (64-IN)
	144-1636	[13]	PIN-CONNECTOR (14-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[1]	PLUG-SEAL
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
	126-1766	[5]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(01.-M)
19.	4P-8134	[1]	CLIP (LADDER)
20.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
21.	7X-2534 M	[6]	BOLT (M6X1X50-MM)
22.	7X-7729	[6]	WASHER (11X25X3-MM THK)
23.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
25.	8T-4189 M	[7]	BOLT (M8X1.25X20-MM)
26.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
27.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
28.	153-9706	[1]	PLATE
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	G		ORDER BY THE INCH
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35210535

188-2860: LINES GP-COUPLER

LINES GP-COUPLER

188-2860 LINES GP-COUPLER
S/N WAC1-UP
PART OF 122-6466, 250-7609 COUPLER AR-QUICK
Type 1
AN ATTACHMENT

i01640830 SEBP3521

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	177-1629 I	[1]	HOSE AS
4.	188-0938 I	[1]	HOSE AS
5.	188-0939 I	[1]	HOSE AS
6.	188-0940 I	[1]	HOSE AS
7.	188-0943 I	[2]	HOSE AS
8.	188-0945 I	[1]	HOSE AS
9.	188-0946 I	[1]	HOSE AS
10.	188-2484	[4]	BLOCK
11.	188-2485	[2]	PLATE
12.	188-2856	[2]	PLATE AS
			(EACH INCLUDES)
	8Y-4489 M	[1]	BOSS (M10X1.5-THD)
13.	188-2869 I	[1]	HOSE AS
14.	192-7625	[1]	SWITCH AS-ROCKER (QUICK COUPLER)
	111-7899	[1]	GASKET
15.	193-4750 Y	[1]	MANIFOLD GP-CONTROL (QUICK COUPLER)
16.	194-1851	[1]	PLATE
17.	194-4120	[4]	SPACER (5.6X15.9X40-MM THK)
18.	200-1898	[1]	SUPPRESSOR-ARC
19.	211-0542	[2]	GUARD-HOSE
20.	148-8325	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8641	[1]	CONNECTOR
21.	148-8336	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
22.	148-8367	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
23.	148-8378	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
24.	148-8433	[1]	TEE AS
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
25.	148-8435	[2]	TEE AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
	6V-8781	[1]	TEE
26.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
27.	148-8457	[2]	UNION AS (STRAIGHT)
			(EACH INCLUDES)
	6V-8398	[2]	SEAL-O-RING
	6V-8995	[1]	UNION (STRAIGHT)
28.	150-3036	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	8T-1905	[1]	ELBOW
29.	4P-7581	[1]	CLIP (LADDER)
30.	5P-7462	[4]	CLIP (SLOT)
31.	5P-7463	[4]	CLIP (TAB)
32.	6D-4246	[3]	CLIP (LOOP)
33.	6V-0683	[4]	GROMMET
34.	6V-9169	[2]	NUT (13/16-16-THD)
35.	7X-2543 M	[2]	BOLT (M10X1.5X120-MM)
36.	8T-4121	[26]	WASHER-HARD (11X21X2.5-MM THK)
37.	8T-4133 M	[7]	NUT (M10X1.5-THD)
38.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
39.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
40.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
41.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35210536

188-2860: LINES GP-COUPLER

LINES GP-COUPLER

188-2860 LINES GP-COUPLER
S/N WAC1-UP
PART OF 122-6466, 250-7609 COUPLER AR-QUICK
Type 2
AN ATTACHMENT

i02558944 SEBP3521

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	160-6066 CI	[1]	HOSE AS
4.	177-1629 I	[1]	HOSE AS
5.	188-0938 I	[1]	HOSE AS
6.	188-0939 I	[1]	HOSE AS
7.	188-0943 I	[2]	HOSE AS
8.	188-0945 I	[1]	HOSE AS
9.	188-0946 I	[1]	HOSE AS
10.	188-2484	[4]	BLOCK
11.	188-2485	[2]	PLATE
12.	188-2856	[2]	PLATE AS
			(EACH INCLUDES)
	8Y-4489 M	[1]	BOSS (M10X1.5-THD)
13.	188-2869 I	[1]	HOSE AS
14.	192-7625	[1]	SWITCH AS-ROCKER (QUICK COUPLER)
	111-7899	[1]	GASKET
15.	194-1851	[1]	PLATE
16.	194-4120	[4]	SPACER (5.6X15.9X40-MM THK)
17.	200-1898	[1]	SUPPRESSOR-ARC
18.	160-2245 G		SLEEVE-ABRASION (45-IN)
19.	233-2549 CY	[1]	MANIFOLD GP-CONTROL (QUICK COUPLER)
20.	148-8325	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8641	[1]	CONNECTOR
21.	148-8336	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
22.	148-8351	[1]	ELBOW AS
	4J-5477	[1]	SEAL-O-RING
	6V-9849	[1]	ELBOW
23.	148-8367	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
24.	148-8368	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8627	[1]	ELBOW
25.	148-8378	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
26.	148-8433	[1]	TEE AS
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
27.	148-8435	[2]	TEE AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
	6V-8781	[1]	TEE
28.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
29.	148-8457	[2]	UNION AS (STRAIGHT)
			(EACH INCLUDES)
	6V-8398	[2]	SEAL-O-RING
	6V-8995	[1]	UNION (STRAIGHT)
30.	150-3036	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	8T-1905	[1]	ELBOW
31.	4P-7581	[1]	CLIP (LADDER)
32.	5P-7462	[4]	CLIP (SLOT)
33.	5P-7463	[4]	CLIP (TAB)
34.	6D-4246	[3]	CLIP (LOOP)
35.	6V-0683	[4]	GROMMET
36.	6V-9169	[2]	NUT (13/16-16-THD)
37.	7X-2543 M	[2]	BOLT (M10X1.5X120-MM)
38.	8T-4121	[26]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4133 M	[7]	NUT (M10X1.5-THD)
40.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
41.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
42.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
43.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
	C		CHANGE FROM PREVIOUS TYPE
	G		ORDER BY THE INCH
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35210537

188-2860: LINES GP-COUPLER

LINES GP-COUPLER

188-2860 LINES GP-COUPLER
S/N WAC1-UP
PART OF 122-6466, 250-7609 COUPLER AR-QUICK
Type 3
AN ATTACHMENT

i02605056 SEBP3521

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	160-6066 I	[1]	HOSE AS
4.	177-1629 I	[1]	HOSE AS
5.	188-0938 I	[1]	HOSE AS
6.	176-7807 CI	[1]	HOSE AS
7.	188-0943 I	[2]	HOSE AS
8.	188-0945 I	[1]	HOSE AS
9.	188-0946 I	[1]	HOSE AS
10.	188-2484	[4]	BLOCK
11.	188-2485	[2]	PLATE
12.	188-2856	[2]	PLATE AS
			(EACH INCLUDES)
	8Y-4489 M	[1]	BOSS (M10X1.5-THD)
13.	188-2869 I	[1]	HOSE AS
14.	192-7625	[1]	SWITCH AS-ROCKER (QUICK COUPLER)
	111-7899	[1]	GASKET
15.	194-1851	[1]	PLATE
16.	194-4120	[4]	SPACER (5.6X15.9X40-MM THK)
17.	200-1898	[1]	SUPPRESSOR-ARC
18.	160-2245 G		SLEEVE-ABRASION (45-IN EACH)
19.	233-2549 Y	[1]	MANIFOLD GP-CONTROL (QUICK COUPLER)
20.	148-8325	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8641	[1]	CONNECTOR
21.	148-8336	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
22.	4D-7735 C	[1]	CLIP
23.	148-8367	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
25.	148-8378	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
26.	148-8433	[1]	TEE AS
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
27.	148-8435	[2]	TEE AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
	6V-8781	[1]	TEE
28.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
29.	148-8457	[2]	UNION AS (STRAIGHT)
			(EACH INCLUDES)
	6V-8398	[2]	SEAL-O-RING
	6V-8995	[1]	UNION (STRAIGHT)
30.	150-3036	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	8T-1905	[1]	ELBOW
31.	4P-7581	[1]	CLIP (LADDER)
32.	5P-7462	[4]	CLIP (SLOT)
33.	5P-7463	[4]	CLIP (TAB)
34.	6D-4246 C	[2]	CLIP (LOOP)
35.	6V-0683	[4]	GROMMET
36.	6V-9169	[2]	NUT (13/16-16-THD)
37.	7X-2543 M	[2]	BOLT (M10X1.5X120-MM)
38.	8T-4121 C	[24]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4133 CM	[6]	NUT (M10X1.5-THD)
40.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
41.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
42.	8T-4195 CM	[2]	BOLT (M10X1.5X30-MM)
43.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
	C		CHANGE FROM PREVIOUS TYPE
	G		ORDER BY THE INCH
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35210538

188-2861: LINES GP-COUPLER

LINES GP-COUPLER

188-2861 LINES GP-COUPLER -WIDE
S/N WAC1-UP
PART OF 122-6468 COUPLER AR-QUICK
Type 1
AN ATTACHMENT

i01638976 SEBP3521

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	188-0938 I	[1]	HOSE AS
4.	188-0939 I	[1]	HOSE AS
5.	188-0940 I	[1]	HOSE AS
6.	188-0943 I	[2]	HOSE AS
7.	188-2484	[4]	BLOCK
8.	188-2485	[2]	PLATE
9.	188-2856	[2]	PLATE AS
			(EACH INCLUDES)
	8Y-4489 M	[1]	BOSS (M10X1.5-THD)
10.	188-2866 I	[1]	HOSE AS
11.	188-2867 I	[1]	HOSE AS
12.	188-2868 I	[2]	HOSE AS
13.	192-7625	[1]	SWITCH AS-ROCKER (QUICK COUPLER)
	111-7899	[1]	GASKET
14.	193-4750 Y	[1]	MANIFOLD GP-CONTROL (QUICK COUPLER)
15.	193-8632	[1]	PLATE
16.	194-4120	[4]	SPACER (5.6X15.9X40-MM THK)
17.	200-1898	[1]	SUPPRESSOR-ARC
18.	211-0542	[2]	GUARD-HOSE
19.	148-8325	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8641	[1]	CONNECTOR
20.	148-8336	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
21.	148-8378	[4]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
22.	148-8433	[2]	TEE AS
			(EACH INCLUDES)
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
23.	148-8434	[1]	TEE AS
	6V-8397	[2]	SEAL-O-RING
	6V-9843	[1]	TEE
24.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
25.	148-8457	[2]	UNION AS (STRAIGHT)
			(EACH INCLUDES)
	6V-8398	[2]	SEAL-O-RING
	6V-8995	[1]	UNION (STRAIGHT)
26.	4P-7581	[1]	CLIP (LADDER)
27.	5P-7462	[4]	CLIP (SLOT)
28.	5P-7463	[4]	CLIP (TAB)
29.	6D-4246	[5]	CLIP (LOOP)
30.	6V-0683	[4]	GROMMET
31.	6V-9169	[2]	NUT (13/16-16-THD)
32.	7X-2543 M	[2]	BOLT (M10X1.5X120-MM)
33.	8T-4121	[28]	WASHER-HARD (11X21X2.5-MM THK)
34.	8T-4133 M	[7]	NUT (M10X1.5-THD)
35.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
36.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
37.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
38.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
39.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35210539

188-2861: LINES GP-COUPLER

LINES GP-COUPLER

188-2861 LINES GP-COUPLER -WIDE
S/N WAC1-UP
PART OF 122-6468 COUPLER AR-QUICK
Type 2
AN ATTACHMENT

i02558950 SEBP3521

For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	160-6066 CI	[1]	HOSE AS
4.	188-0938 I	[1]	HOSE AS
5.	188-0939 I	[1]	HOSE AS
6.	188-0943 I	[2]	HOSE AS
7.	188-2484	[4]	BLOCK
8.	188-2485	[2]	PLATE
9.	188-2856	[2]	PLATE AS
			(EACH INCLUDES)
	8Y-4489 M	[1]	BOSS (M10X1.5-THD)
10.	188-2866 I	[1]	HOSE AS
11.	188-2867 I	[1]	HOSE AS
12.	188-2868 I	[2]	HOSE AS
13.	192-7625	[1]	SWITCH AS-ROCKER (QUICK COUPLER)
	111-7899	[1]	GASKET
14.	193-8632	[1]	PLATE
15.	194-4120	[4]	SPACER (5.6X15.9X40-MM THK)
16.	200-1898	[1]	SUPPRESSOR-ARC
17.	160-2245 G		SLEEVE-ABRASION (45-IN)
18.	233-2549 CY	[1]	MANIFOLD GP-CONTROL (QUICK COUPLER)
19.	148-8325	[1]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8641	[1]	CONNECTOR
20.	148-8336	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
21.	148-8351	[1]	ELBOW AS
	4J-5477	[1]	SEAL-O-RING
	6V-9849	[1]	ELBOW
22.	148-8368	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8627	[1]	ELBOW
23.	148-8378	[4]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
24.	148-8433	[2]	TEE AS
			(EACH INCLUDES)
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
25.	148-8434	[1]	TEE AS
	6V-8397	[2]	SEAL-O-RING
	6V-9843	[1]	TEE
26.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
27.	148-8457	[2]	UNION AS (STRAIGHT)
			(EACH INCLUDES)
	6V-8398	[2]	SEAL-O-RING
	6V-8995	[1]	UNION (STRAIGHT)
28.	4P-7581	[1]	CLIP (LADDER)
29.	5P-7462	[4]	CLIP (SLOT)
30.	5P-7463	[4]	CLIP (TAB)
31.	6D-4246	[5]	CLIP (LOOP)
32.	6V-0683	[4]	GROMMET
33.	6V-9169	[2]	NUT (13/16-16-THD)
34.	7X-2543 M	[2]	BOLT (M10X1.5X120-MM)
35.	8T-4121	[28]	WASHER-HARD (11X21X2.5-MM THK)
36.	8T-4133 M	[7]	NUT (M10X1.5-THD)
37.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
38.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
39.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
40.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
41.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
	C		CHANGE FROM PREVIOUS TYPE
	G		ORDER BY THE INCH
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION