OPERATOR STATION
PANEL GPBRAKING SYSTEM
CONTROL GPOPERATOR STATION
PEDAL GPPLATFORM GP
SEAT GP
OPERATOR STATION
PANEL GP
#SEBP35210890
190-4320: PANEL GP-INSTRUMENT
190-4320 PANEL GP-INSTRUMENT -RELAYS, SWITCHES, WIRING
S/N WAC1-UP; WLG1012-UP
PART OF 190-4649 OPERATOR AR, 190-4651 OPERATOR AR-ENCLOSED ROPS, 190-4652 PLATFORM AR
Type 2
AN ATTACHMENT
S/N WAC1-UP; WLG1012-UP
PART OF 190-4649 OPERATOR AR, 190-4651 OPERATOR AR-ENCLOSED ROPS, 190-4652 PLATFORM AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 154-5629 | [1] | ASHTRAY AS | |
| 2. | 2G-5298 B | [1] | WIRE AS | |
| 3. | 4I-3038 | [4] | WASHER (3.3X8X0.5-MM THK) | |
| 4. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 5. | 7K-1181 | [39] | STRAP-CABLE | |
| 6. | 105-8034 | [1] | SWITCH AS-LIMIT (BRAKE PEDAL) | |
| 7. | 107-6013 | [1] | SEAL | |
| 8. | 107-6021 | [1] | HOUSING AS | |
| 9. | 110-6109 | [1] | KNOB-CONTROL (TEMPERATURE) | |
| 10. | 114-3951 | [1] | PLATE | |
| 11. | 115-1748 | [1] | LAMP (24-VOLT, 3-WATT)(ACTION LIGHT) | |
| 12. | 116-7471 | [1] | PULLER-MINIFUSE | |
| 13. | 117-3787 | [4] | KNOB | |
| 14. | 117-3788 | [4] | RECEPTACLE | |
| 15. | 117-3789 | [4] | RETAINER | |
| 16. | 118-7362 | [1] | GROMMET-SPLIT | |
| 17. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 18. | 148-5689 | [1] | GROMMET-SPLIT | |
| 19. | 158-5089 | [1] | RELAY AS (24-VOLT)(BRAKE LIGHT) | |
| 20. | 165-0311 B | [7] | PLUG | |
| 21. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 22. | 195-0916 | [1] | SWITCH AS-ROCKER (THROTTLE LOCK SET, RESUME) | |
| 111-7899 | [1] | GASKET | ||
| 23. | 195-0917 | [1] | SWITCH AS-ROCKER (THROTTLE LOCK ON, OFF) | |
| 24. | 195-0921 | [1] | SWITCH AS-ROCKER (KICKOUT ON, OFF) | |
| 111-7899 | [1] | GASKET | ||
| 25. | 206-1345 | [2] | STRAP-CABLE | |
| 26. | 211-0052 | [3] | NUT (1-11/16-18-THD) | |
| 27. | 266-7620 | [1] | SWITCH AS-ROCKER (IMPLEMENT DISABLE) | |
| 111-7899 | [1] | GASKET | ||
| 28. | 226-2951 | [1] | BRACKET AS | |
| 29. | 226-3378 | [1] | PLATE AS | |
| 30. | 307-1495 C | [1] | FILM-FUSE/RELAY | |
| 31. | 266-0653 | [1] | HARNESS AS-CAB (MAIN) | |
| 104-1995 | [16] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 116-4160 | [5] | TERMINAL-BLADE (12-GA TO 14-GA) | ||
| 116-4161 | [19] | TERMINAL-BLADE (16-GA TO 18-GA) | ||
| 6V-0491 | [2] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 127-5460 | [3] | TERMINAL-BUS | ||
| 113-5184 | [2] | TERMINAL-RECEPTACLE (16-GA TO 18-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 9X-1056 | [2] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 128-4168 | [3] | TERMINAL AS | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8081 | [3] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 8T-8737 | [131] | PLUG-SEAL | ||
| 9W-0844 | [18] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 122-4401 | [22] | TERMINAL | ||
| 091-2436 | [34] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 7T-0093 | [7] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1546 | [1] | PIN-CONNECTOR (6-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [82] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1766 | [99] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 141-8061 B | TAPE | |||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | [5] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [5] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [6] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [12] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 167-3693 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 102-8802 | [8] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [2] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7K-1181 | [2] | STRAP-CABLE | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8L-8413 | [129] | STRAP-CABLE (WHITE) | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 112-9609 | [1] | BLOCK-MICRORELAY | ||
| 112-9610 | [1] | LOCK-MICRORELAY | ||
| 112-9611 | [10] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 112-9612 | [10] | TERMINAL-BLADE | ||
| 113-5100 | [4] | TERMINAL-BUS | ||
| 113-5183 | [1] | SOCKET-LAMP | ||
| 113-8490 | [18] | FUSE (10-AMPERE) | ||
| 113-8491 | [7] | FUSE (15-AMPERE) | ||
| 113-8492 | [1] | FUSE (20-AMPERE) | ||
| 116-4159 | [1] | BASE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 123-7615 | [1] | CONNECTOR (1-PIN) | ||
| 228-5856 | [12] | CONNECTOR (10-PIN) | ||
| 124-9636 | [2] | BLOCK-MINIFUSE | ||
| 124-9637 | [1] | LOCK-MINIFUSE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(240-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM) | |||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 180-9340 | [170] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 197-7259 | [1] | RECEPTACLE AS-CONNECTOR (19-PIN) | ||
| 225-3861 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 32. | 236-4232 | [1] | PLATE AS | |
| 33. | 236-4234 | [1] | SWITCH AS-ROCKER (BLOWER FAN SPEED) | |
| 34. | 238-4864 | [1] | BRACKET AS | |
| 159-9539 M | [1] | NUT-WELD (M6X1-THD) | ||
| 35. | 252-4575 | [1] | FILM-IDENTIFICATION (CONSOLE, RH) | |
| 36. | 245-9088 | [1] | BUMPER | |
| 37. | 293-6135 | [1] | COVER | |
| 38. | 142-2928 | [4] | LOCKNUT (4-40-THD) | |
| 39. | 170-9360 | [1] | GROMMET | |
| 40. | 249-2757 | [2] | CLIP | |
| 41. | 4P-7581 | [1] | CLIP (LADDER) | |
| 42. | 4P-8134 | [4] | CLIP (LADDER) | |
| 43. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 44. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 45. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 46. | 6V-8837 M | [1] | BOLT (M6X1X16-MM) | |
| 47. | 7X-3308 | [4] | BOLT-SOCKET HEAD (4-40X0.375-IN) | |
| 48. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 49. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 50. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 51. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 52. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 53. | 8T-4199 M | [2] | BOLT (M8X1.25X12-MM) | |
| 54. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 55. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 56. | 9X-1046 M | [4] | SCREW (M4X0.7X18-MM) | |
| 57. | 9X-2042 M | [4] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 58. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 59. | 103-2543 E | SEAL (3-CM) | ||
| 60. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 61. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 62. | 204-6101 | [4] | WASHER-HARD (5.3X10X1-MM THK) | |
| 63. | 8T-8737 | [18] | PLUG-SEAL | |
| 64. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS & WEDGE) | ||||
| 65. | 102-8805 | [2] | KIT-RECEPTACLE (6-PIN) | |
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 66. | 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | |
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35210891
215-2885: PANEL GP-INSTRUMENT
215-2885 PANEL GP-INSTRUMENT -GAUGE CLUSTER
S/N WAC1-UP; WLG1-UP
PART OF 190-4649 OPERATOR AR, 190-4651 OPERATOR AR-ENCLOSED ROPS, 190-4656 OPERATOR AR-OPEN ROPS
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 190-4649 OPERATOR AR, 190-4651 OPERATOR AR-ENCLOSED ROPS, 190-4656 OPERATOR AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 129-7184 | [1] | FILM-INSTRUCTION (ENGINE START) | |
| 3. | 184-5293 B | [1] | PLUG | |
| 4. | 185-5629 | [1] | PLATE AS | |
| 5. | 190-4555 | [1] | HOUSING AS | |
| 6. | 190-4556 | [1] | PLATE AS | |
| 7. | 190-4563 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8. | 202-1129 M | [6] | SCREW-TRUSS HEAD (M4X0.7X18-MM) | |
| 9. | 214-4916 | [1] | FILM (INSTRUMENT PANEL COVER) | |
| 10. | 218-2401 | [1] | MODULE GP-DISPLAY (GAUGE CLUSTER) | |
| 11. | 129-3178 M | [2] | LOCKNUT (M6X1-THD) | |
| 12. | 1H-4393 | [6] | LOCKWASHER | |
| 13. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 14. | 5C-8312 M | [6] | NUT (M4X0.7-THD) | |
| 15. | 6V-8490 M | [2] | BOLT (M6X1X25-MM) | |
| 16. | 8C-9987 | [2] | WASHER (8.3X28X2.5-MM THK) | |
| 17. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 18. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 19. | 270-9442 M | [1] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 20. | 9X-2026 | [1] | WASHER (6.5X17X1-MM THK) | |
| 21. | 204-6101 | [6] | WASHER-HARD (5.3X10X1-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP35210892
174-9730: PEDAL GP-BRAKE
174-9730 PEDAL GP-BRAKE
S/N WAC1-UP; WLG1-UP
PART OF 219-2849 PLATFORM GP-OPERATOR, 174-9749 ROPS GP-ENCLOSED, 174-9764 ROPS GP-OPEN
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 219-2849 PLATFORM GP-OPERATOR, 174-9749 ROPS GP-ENCLOSED, 174-9764 ROPS GP-OPEN
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8723 | [1] | KEY-WOODRUFF | |
| 2. | 6K-8088 | [4] | BEARING-ROLLER | |
| 3. | 8E-8300 | [2] | DISC-THRUST | |
| 4. | 8R-6904 | [2] | TREAD-RUBBER | |
| 5. | 107-6056 | [1] | PEDAL AS | |
| 6. | 111-0132 | [1] | PEDAL AS | |
| 7. | 174-9725 | [1] | SUPPORT AS | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| M | METRIC PART | |||
#SEBP35210893
190-4700: PEDAL GP-GOVERNOR
190-4700 PEDAL GP-GOVERNOR
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR, 190-4405, 190-4406 OPERATOR AR, 190-4652 PLATFORM AR
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR, 190-4405, 190-4406 OPERATOR AR, 190-4652 PLATFORM AR
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP35210894
261-7148: PEDAL GP-GOVERNOR
261-7148 PEDAL GP-GOVERNOR -ELECTRONIC
S/N WAC1-UP; WLG1-UP
PART OF 190-4700 PEDAL GP-GOVERNOR
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 190-4700 PEDAL GP-GOVERNOR
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3C-4922 M | [1] | BOLT (M8X1.25X60-MM) | |
| 2. | 160-2443 Y | [1] | SENSOR GP-POSITION (ROTARY) | |
| 3. | 179-4324 M | [2] | LOCKNUT (M5X0.8-THD) | |
| 4. | 243-0063 | [1] | BOOT | |
| 5. | 096-3772 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 6. | 131-3540 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 7. | 3C-3364 M | [1] | NUT-HALF (M8X1.25-THD) | |
| 8. | 6V-2313 M | [2] | BOLT (M5X0.8X30-MM) | |
| 9. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 10. | 8T-6902 | [2] | CLIP | |
| 11. | 8T-6912 M | [2] | BOLT (M8X1.25X50-MM) | |
| 12. | 243-0062 | [1] | KIT-REPAIR (GOVERNOR PEDAL) | |
| (INCLUDES SHAFT, CLIPS & BEARINGS) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35210895
190-4652: PLATFORM AR
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 190-4605 Y | [1] | AIR CONDITIONER & MOUNTING GP (WITH CABLE CONTROL) | ||
| -OR- | ||||
| 239-8104 Y | [1] | AIR CONDITIONER & MOUNTING GP (WITH CABLE CONTROL) | ||
| -OR- | ||||
| 284-0506 Y | [1] | AIR CONDITIONER & MOUNTING GP (WITH CABLE CONTROL) | ||
| 201-1802 Y | [1] | COMPRESSOR GP-REFRIGERANT | ||
| 203-5937 Y | [1] | CONDENSER & MTG GP-REFRIGERANT | ||
| 168-7000 Y | [1] | CONTROL GP-PARKING BRAKE (HANDLE) | ||
| 190-4635 Y | [1] | CONTROL GP-STEERING | ||
| 190-4690 Y | [1] | CONTROL GP-TRANSMISSION | ||
| 107-4630 Y | [1] | DUCT GP-CAB AIR | ||
| 119-4769 Y | [1] | FILTER GP-CAB AIR | ||
| 125-3961 Y | [1] | LINER GP-CAB | ||
| 203-5932 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 203-5931 Y | [1] | LINES GP-CAB HEATER | ||
| 156-4271 Y | [1] | MOUNTING GP-CAB | ||
| 184-5297 Y | [1] | PANEL GP-INSTRUMENT (GAUGE CLUSTER) | ||
| 190-4320 Y | [1] | PANEL GP-INSTRUMENT (RELAYS, SWITCHES, WIRING) | ||
| 198-8965 Y | [1] | PANEL GP-TOP (HOOD, AIR CONDITIONER) | ||
| 190-4700 Y | [1] | PEDAL GP-GOVERNOR | ||
| 219-2849 Y | [1] | PLATFORM GP-OPERATOR | ||
| 190-4666 Y | [1] | SKIRT GP-CAB | ||
| 131-1236 Y | [1] | WASHER GP-WINDOW | ||
| 190-4340 Y | [1] | WIRING GP-CAB (ENCLOSED ROPS) | ||
| 119-9759 | [1] | PLATFORM AS | ||
| 7T-1099 | [2] | LINK | ||
| 8T-4123 | [4] | WASHER (3.62X5.75X0.375-MM THK) | ||
| 8T-6430 M | [2] | BOLT (M20X2.5X50-MM) | ||
| 8T-4131 M | [2] | NUT (M20X2.5-THD) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35210896
119-9756: PLATFORM GP
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 119-9759 | [1] | PLATFORM AS | |
| 7T-1099 | [1] | LINK | ||
| 2. | 119-9760 | [1] | PLATFORM AS | |
| 7T-1099 | [5] | LINK | ||
| 3. | 119-9762 | [2] | STRIP | |
| 4. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 5. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 6. | 8T-6430 M | [8] | BOLT (M20X2.5X50-MM) | |
| 7. | 8T-4123 | [10] | WASHER (3.62X5.75X0.375-MM THK) | |
| 8. | 8T-4131 M | [2] | NUT (M20X2.5-THD) | |
| M | METRIC PART | |||
#SEBP35210897
119-9818: PLATFORM GP
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 119-9756 Y | [1] | PLATFORM GP | |
| 2. | 219-2849 Y | [1] | PLATFORM GP-OPERATOR | |
| 3. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 4. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 118-7255 | [1] | COVER | |
| 6. | 8T-4131 M | [2] | NUT (M20X2.5-THD) | |
| 7. | 5P-5943 D | SEAL (3.2M) | ||
| 8. | 8T-4123 | [10] | WASHER (3.62X5.75X0.375-MM THK) | |
| 9. | 7X-2563 M | [8] | BOLT (M20X2.5X60-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35210898
219-2849: PLATFORM GP-OPERATOR
219-2849 PLATFORM GP-OPERATOR -BRAKE PEDAL
S/N WAC1-UP; WLG1-UP
PART OF 190-4652 PLATFORM AR, 119-9818 PLATFORM GP
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 190-4652 PLATFORM AR, 119-9818 PLATFORM GP
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-9730 Y | [1] | PEDAL GP-BRAKE | |
| 2. | 219-2850 | [1] | FLOORPLATE AS | |
| 5G-8871 M | [8] | BOSS (M6X1-THD) | ||
| 7T-1099 | [22] | LINK | ||
| 9G-9155 | [2] | CLIP | ||
| 9R-2672 M | [12] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 3. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 4. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35210899
210-2270: RECLINER GP-SEAT
210-2270 RECLINER GP-SEAT
S/N WAC1-UP; WLG1-UP
PART OF 178-0603 SEAT GP
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 178-0603 SEAT GP
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 177-1862 | [1] | BRACKET (SEAT BELT) | |
| 2. | 210-2262 | [1] | BRACKET AS (LH) | |
| 3. | 210-2263 | [1] | BRACKET AS (RH) | |
| 4. | 210-2266 | [1] | GEAR-LOCK (14-TEETH) | |
| 5. | 210-2268 | [1] | SHAFT AS | |
| 2L-5893 | [2] | PIN-SPRING | ||
| 170-8590 | [1] | SPRING | ||
| 6. | 217-7933 | [1] | LATCH | |
| 7. | 236-5197 | [1] | SPRING | |
| 8. | 031-0214 | [1] | BOLT-LOCKING (1/4-20X0.5-IN) | |
| 9. | 101-2867 | [1] | WASHER-HARD (7.2X25X2-MM THK) | |
| 10. | 4M-6425 | [1] | BOLT (5/16-18X1-IN) | |
| 11. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 13. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) |
Information:
OPERATOR STATION
PANEL GP
Service Magazine
