OPERATOR STATION
SEAT GPCAB GP
CONTROL GP-STEERING
SEAT GP
OPERATOR STATION
SEAT GP
#SEBP35210930
233-7389: SEAT GP-SUSPENSION
233-7389 SEAT GP-SUSPENSION -CLOTH, HEATED
S/N WAC442-UP; WLG537-UP
PART OF 226-1845 SEAT & MOUNTING GP
Type 1
AN ATTACHMENT
S/N WAC442-UP; WLG537-UP
PART OF 226-1845 SEAT & MOUNTING GP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-6680 | [1] | KIT-SWITCH (SEAT SENSOR) | |
| (INCLUDES PIN CONNECTOR & RECEPTACLE KIT) | ||||
| 2. | 109-6681 | [1] | KIT-HEATER (SEAT) | |
| (INCLUDES PIN CONNECTOR & RECEPTACLE KIT) | ||||
| 3. | 110-5056 | [1] | KIT-SEAT (BACK) | |
| 4. | 110-5059 | [1] | KIT-SEAT (BOTTOM) | |
| 5. | 156-1686 | [1] | KIT-COVER (SEAT) | |
| (INCLUDES POUCH WIRES, D-CLIPS & SEAT COVER) | ||||
| 6. | 156-1687 | [1] | KIT-COVER (BACK) | |
| (INCLUDES TRIM BAR, HOG RING & BACK COVER) | ||||
| 7. | 202-4732 | [1] | KIT-FRAME (SEAT) | |
| (INCLUDES STOP CLIPS, HEADREST GUIDES, SCREWS & T5 FRAME) | ||||
| 8. | 202-4736 | [1] | KIT-DAMPER | |
| (INCLUDES DAMPER BRUSH, STARLOCK WASHERS, PUSHNUT, SPACER, DAMPER, CLIP-ON SPACERS, DOUBLE PIN & HEADED PIN) | ||||
| 9. | 202-4738 | [1] | KIT-SUSPENSION (SEAT) | |
| (INCLUDES SUSPENSION AS) | ||||
| 10. | 202-4739 | [1] | KIT-STOP (SUSPENSION SEAT) | |
| (INCLUDES UPSTOPS & BUMPSTOP) | ||||
| 11. | 204-1126 | [1] | KIT-PLATE (SEAT BASE) | |
| (INCLUDES INTERFACE PLATE, SCREWS & PI WASHERS) | ||||
| 12. | 213-4574 | [1] | KIT-BOOT (SUSPENSION SEAT) | |
| 13. | 213-4576 | [1] | KIT-RIDE CONTROL (SUSPENSION SEAT) | |
| 14. | 213-4579 | [1] | KIT-WEIGHT ADJUSTER (SUSPENSION SEAT) | |
| 15. | 242-8764 | [1] | SUPPORT (RH) | |
| 16. | 242-8765 | [1] | SUPPORT (LH) | |
| 17. | 250-6011 | [1] | KIT-STRAP (SEAT) | |
| 18. | 250-6012 | [1] | KIT-SLIDE RAIL (SEAT) | |
| 19. | 250-6013 | [1] | KIT-LEVER (SEAT) | |
#SEBP35210931
233-7389: SEAT GP-SUSPENSION
233-7389 SEAT GP-SUSPENSION -CLOTH, HEATED
S/N WAC442-UP; WLG537-UP
PART OF 226-1845 SEAT & MOUNTING GP
Type 2
AN ATTACHMENT
S/N WAC442-UP; WLG537-UP
PART OF 226-1845 SEAT & MOUNTING GP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 250-6013 | [1] | KIT-LEVER (SEAT) | |
| 2. | 109-6681 | [1] | KIT-HEATER (SEAT) | |
| (INCLUDES PINS & RECEPTACLE KIT) | ||||
| 3. | 110-5056 | [1] | KIT-SEAT (BACK) | |
| 4. | 110-5059 | [1] | KIT-SEAT (BOTTOM) | |
| 5. | 156-1686 | [1] | KIT-COVER (SEAT) | |
| (INCLUDES POUCH WIRE, D-CLIPS & SEAT COVER) | ||||
| 6. | 156-1687 | [1] | KIT-COVER (BACK) | |
| (INCLUDES TRIM BARS, HOG RINGS & BACK COVER) | ||||
| 7. | 202-4732 | [1] | KIT-FRAME (SEAT) | |
| (INCLUDES STOP CLIPS, HEADREST GUIDES, SCREWS & T5 FRAME) | ||||
| 8. | 202-4736 | [1] | KIT-DAMPER | |
| (INCLUDES DAMPER BRUSH, STARLOCK WASHERS, PUSHNUT, SPACERS, DAMPER & PINS) | ||||
| 9. | 202-4738 | [1] | KIT-SUSPENSION (SEAT) | |
| (INCLUDES SUSPENSION AS) | ||||
| 10. | 202-4739 | [1] | KIT-STOP (SUSPENSION SEAT) | |
| (INCLUDES UPSTOPS & BUMPSTOP) | ||||
| 11. | 204-1126 | [1] | KIT-PLATE (SEAT BASE) | |
| (INCLUDES INTERFACE PLATE, SCREWS & WASHERS) | ||||
| 12. | 213-4574 | [1] | KIT-BOOT (SUSPENSION SEAT) | |
| 13. | 213-4576 | [1] | KIT-RIDE CONTROL (SUSPENSION SEAT) | |
| 14. | 213-4579 | [1] | KIT-WEIGHT ADJUSTER (SUSPENSION SEAT) | |
| 15. | 242-8764 | [1] | SUPPORT (RH) | |
| 16. | 242-8765 | [1] | SUPPORT (LH) | |
| 17. | 250-6011 | [1] | KIT-STRAP (SEAT) | |
| 18. | 250-6012 | [1] | KIT-SLIDE RAIL (SEAT) | |
#SEBP35210932
239-5814: SEAT GP-SUSPENSION
239-5814 SEAT GP-SUSPENSION
S/N WAC1-UP; WLG1-UP
PART OF 255-6160 CAB AR-ENCLOSED ROPS
CANNOT BE USED WITH @@@@@226-1842@@@@@, @@@@@226-1843@@@@@, @@@@@107-5978@@@@@, @@@@@226-1845@@@@@
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 255-6160 CAB AR-ENCLOSED ROPS
CANNOT BE USED WITH @@@@@226-1842@@@@@, @@@@@226-1843@@@@@, @@@@@107-5978@@@@@, @@@@@226-1845@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 177-4937 | [1] | SPACER (11.7X19.8X20.3-MM THK) | |
| 2. | 219-8096 Y | [1] | SEAT GP-SUSPENSION (AIR) | |
| 3. | 222-0345 | [1] | SEAT BELT GP (RETRACTABLE, 3-IN) | |
| 0T-0244 | [1] | BOLT (7/16-20X1.25-IN) | ||
| 205-6388 | [1] | BOLT (7/16-20X1.75-IN) | ||
| 4. | 0T-0244 | [1] | BOLT (7/16-20X1.25-IN) | |
| 5. | 113-9232 M | [2] | BOLT (M8X1.25X30-MM) | |
| 6. | 205-6388 | [1] | BOLT (7/16-20X1.75-IN) | |
| 7. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 9X-2125 M | [4] | BOLT-LOCKING (M10X1.5X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35210933
8Y-6977: SEAT GP-SUSPENSION
8Y-6977 SEAT GP-SUSPENSION -CLOTH, LUMBAR
S/N WAC1-UP; WLG1-UP
PART OF 107-5978 SEAT & MOUNTING GP
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 107-5978 SEAT & MOUNTING GP
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6883 Y | [1] | EXTENSION GP-BACKREST (CLOTH) | |
| 2. | 8Y-6882 Y | [1] | SEAT GP (CLOTH, LUMBAR) | |
| 3. | 8Y-6000 Y | [1] | ARMREST GP (LH) | |
| 4. | 8Y-4200 Y | [1] | ARMREST GP (RH) | |
| 5. | 108-4082 Y | [1] | SUSPENSION GP-SEAT | |
| 6. | 156-1148 CY | [1] | SEAT BELT GP (RETRACTABLE, 3-IN) | |
| 7. | 4F-4879 J | [1] | BOLT (3/8-16X0.5-IN) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 149-4745 J | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | ||
| (ALSO INCLUDES SLIDER BLOCKS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35210934
190-4665: SKIRT GP-CAB
190-4665 SKIRT GP-CAB -OPEN ROPS
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR, 190-4658 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR, 190-4658 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP35210935
190-4666: SKIRT GP-CAB
190-4666 SKIRT GP-CAB -ENCLOSED ROPS
S/N WAC1-UP; WLG1-UP
PART OF 190-4662, 190-4663 CAB AR, 190-4652 PLATFORM AR
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 190-4662, 190-4663 CAB AR, 190-4652 PLATFORM AR
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 128-0782 | [1] | SHEET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 2. | 128-0783 | [1] | SHEET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 128-0784 | [1] | SHEET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 128-0785 | [1] | SHEET AS | |
| 5. | 129-0334 | [1] | SHEET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 129-0335 | [1] | SHEET AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 7. | 132-3543 | [1] | STRAP AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 8T-4121 | [24] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [24] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
#SEBP35210936
201-4825: STEERING COLUMN GP-ADJUSTABLE
201-4825 STEERING COLUMN GP-ADJUSTABLE -TILT
S/N WAC1-UP; WLG1-UP
PART OF 190-4635, 190-4643 CONTROL GP-STEERING
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 190-4635, 190-4643 CONTROL GP-STEERING
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 149-0777 | [1] | KNOB | |
| 2. | 252-8059 | [1] | KIT-HORN | |
| (INCLUDES HORN CONTACT AS, SCREW & LOCKWASHER) | ||||
| 3. | 169-3261 M | [1] | NUT (M18X1.5-THD) | |
| 4. | 217-4154 | [1] | SPRING AS-GAS | |
| 5. | 217-4155 | [1] | KIT-TILT LEVER | |
| 6. | 196-3699 | [2] | PIN-PIVOT | |
| 7. | 196-3698 | [2] | BUSHING-PIVOT | |
| M | METRIC PART | |||
#SEBP35210937
280-6837: STEERING COLUMN GP-ADJUSTABLE
280-6837 STEERING COLUMN GP-ADJUSTABLE -TILT
S/N WAC1-UP; WLG1016-UP
PART OF 190-4635 CONTROL GP-STEERING
AN ATTACHMENT
S/N WAC1-UP; WLG1016-UP
PART OF 190-4635 CONTROL GP-STEERING
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-3695 | [1] | PLUG-SEAL | |
| 2. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 149-0777 | [1] | KNOB (STEERING COLUMN TILT) | |
| 4. | 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 5. | 319-9510 | [1] | SPRING AS-GAS (STEERING COLUMN TILT) | |
| 6. | 217-4155 | [1] | KIT-TILT LEVER (STEERING COLUMN) | |
| 7. | 332-6884 | [1] | KIT-CONTACT (STEERING COLUMN) | |
| (INCLUDES HORN CONTACT AS & SCREWS) | ||||
| 8. | 321-6951 | [1] | KIT-PIVOT (STEERING COLUMN) | |
| (INCLUDES PIVOT BUSHINGS & PIVOT PINS) | ||||
| 9. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 10. | 311-8557 | [1] | COLUMN AS-STEERING | |
| M | METRIC PART | |||
#SEBP35210938
319-1625: STEERING COLUMN GP-ADJUSTABLE
319-1625 STEERING COLUMN GP-ADJUSTABLE -TILT
S/N WAC1-UP; WLG1016-UP
PART OF 190-4635 CONTROL GP-STEERING
AN ATTACHMENT
S/N WAC1-UP; WLG1016-UP
PART OF 190-4635 CONTROL GP-STEERING
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-3695 | [1] | PLUG-SEAL | |
| 2. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 149-0777 | [1] | KNOB (STEERING COLUMN TILT) | |
| 5. | 319-9510 | [1] | SPRING AS-GAS (STEERING COLUMN) | |
| 6. | 217-4155 | [1] | KIT-TILT LEVER (STEERING COLUMN) | |
| (INCLUDES BOLTS, DOWEL, ROLL PIN, SPRING & TILT LEVER) | ||||
| 7. | 332-6884 | [1] | KIT-CONTACT (HORN) | |
| (INCLUDES HORN CONTACT AS & SCREWS) | ||||
| 8. | 321-6951 | [1] | KIT-PIVOT (STEERING COLUMN TILT) | |
| (INCLUDES PINS & BUSHINGS) | ||||
| 9. | 311-8557 | [1] | COLUMN AS-STEERING | |
| 10. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| M | METRIC PART | |||
#SEBP35210939
118-0808: SUPPORT GP-SEAT
118-0808 SUPPORT GP-SEAT
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR, 190-4406 OPERATOR AR
AN ATTACHMENT
S/N WAC1-UP; WLG1-UP
PART OF 190-4653 CANOPY AR, 190-4406 OPERATOR AR
AN ATTACHMENT
For full view, you need register
