AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

180-8801 WIRING GP-ENGINE S/N DDA1-3374; DFZ1-563 PART OF 176-5181, 176-5201 CHASSIS AR 924G WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

WHEEL LOADER 924G WHEEL LOADER DDA
 924G 924Gz Wheel Loader DDA00001-03916 (MACHINE) POWERED BY 3056E Engine SEBP3524 924G DDA   (2002)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-FRONT
132-2672 WIRING GP-FRONT
 

#SEBP35240220
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N DDA1-3374; DFZ1-563
PART OF 176-5181, 176-5201 CHASSIS AR
i02190526 SEBP3524
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(STARTING AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 3S-2093 [5] STRAP-CABLE  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(FLOODLIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 [21] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8827 C [4] BOOT (RED)  
7. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
8. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING RELAY)  
9. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
10. 131-3201 [4] BOOT  
11. 134-2540 [1] RECEPTACLE AS-CONNECTOR  
12. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(ALTERNATOR)  
14. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(MAIN)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 204-2281 C [3] STRAP-CABLE  
18. 225-5224 [1] CABLE AS  
  8C-3056 BE CABLE (2-GA, RED)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
19. 226-5923 [1] BRACKET  
20. 229-6257 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
21. 236-4236 C [1] HARNESS AS-ENGINE  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
22. 251-6182 C [1] WIRE AS  
23. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 204-8000 C [3] MOUNTING-CABLE TIE  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 [2] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [10] CLIP (LADDER)  
31. 4P-8134 [5] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
34. 8T-0269 CM [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
35. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
42. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4205 C [1] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
52. 9M-4972 [2] CLIP (LOOP)  
53. 9X-8256 C [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35240221
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N DDA3375-3387; DFZ1-563
PART OF 176-5181, 176-5201 CHASSIS AR
i02661695 SEBP3524
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(STARTING AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 8T-8737 C [2] PLUG-SEAL  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(FLOODLIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 [21] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8827 [4] BOOT (RED)  
7. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
8. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING RELAY)  
9. 130-9811 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
10. 131-3201 [4] BOOT  
11. 134-2540 [1] RECEPTACLE AS-CONNECTOR  
12. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(ALTERNATOR)  
14. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(MAIN)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
    (EACH CIRCUIT BREAKER AS INCLUDES)
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 204-2281 C [6] STRAP-CABLE  
18. 225-5224 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(20-CM)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
19. 282-9931 C [1] BRACKET  
20. 229-6257 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
21. 236-4236 [1] HARNESS AS-ENGINE  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-8737 [21] PLUG-SEAL  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-7110 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  100-6674 [4] SEAL-CONNECTOR  
  7T-0094 [5] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1547 [1] SOCKET-CONNECTOR (6-GA)  
  9W-0844 [7] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  180-9340 [50] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  124-5640 [2] TERMINAL-SOCKET  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [3] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  9F-3965 [1] TERMINAL (6-GA, 1/4-IN SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8078 [2] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  281-4546 [1] TERMINAL-BLADE  
  9X-1056 [8] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(6-CM)  
22. 251-6182 [1] WIRE AS  
23. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 204-8000 [3] MOUNTING-CABLE TIE  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 C [3] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 C [9] CLIP (LADDER)  
31. 4P-8134 [5] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
34. 8T-4138 CM [1] BOLT (M6X1X20-MM)  
35. 8T-4121 C [10] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
38. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
42. 8T-4191 CM [2] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 116-6161 BC [1] CAP-CONNECTOR  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
52. 9M-4972 C [1] CLIP (LOOP)  
53. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
54. 102-8802 C [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
55. 3S-2093 C [3] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35240222
 

180-8801: WIRING GP-ENGINE

180-8801 WIRING GP-ENGINE
S/N DDA3388-3916; DFZ1-563
PART OF 176-5181, 176-5201 CHASSIS AR
i02665334 SEBP3524
1808801 WIRING GP-ENGINE Parts scheme 1808801 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(STARTING AID)  
1A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(FLOODLIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 C [22] STRAP-CABLE  
5. 7W-1251 [1] RESISTOR  
6. 8T-8799 [4] BOOT (RED)  
7. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
8. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING RELAY)  
9. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)  
  137-6645 [1] PAD-CONNECTOR (CONNECTOR)  
10. 131-3201 [4] BOOT  
11. 134-2540 [1] RECEPTACLE AS-CONNECTOR  
12. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(ALTERNATOR)  
14. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)(MAIN)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
    (EACH CIRCUIT BREAKER AS INCLUDES)
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 204-2281 [6] STRAP-CABLE  
18. 225-5224 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(20CM)  
  030-1712 [2] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
19. 282-9931 [1] BRACKET  
20. 229-6257 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
21. 236-4236 [1] HARNESS AS-ENGINE  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-7261 [1] PLUG AS-CONNECTOR (19-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-8737 [21] PLUG-SEAL  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-7110 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  100-6674 [4] SEAL-CONNECTOR  
  7T-0094 [5] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1547 [1] SOCKET-CONNECTOR (6-GA)  
  9W-0844 [7] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  180-9340 [50] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  124-5640 [2] TERMINAL-SOCKET  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [3] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  9F-3965 [1] TERMINAL (6-GA, 1/4-IN SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8078 [2] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  281-4546 [1] TERMINAL-BLADE  
  9X-1056 [8] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(6-CM)  
22. 251-6182 [1] WIRE AS  
23. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 204-8000 [3] MOUNTING-CABLE TIE  
26. 3K-0360 [1] SEAL-O-RING  
27. 3S-8665 [3] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [9] CLIP (LADDER)  
31. 4P-8134 C [6] CLIP (LADDER)  
32. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
33. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
34. 8T-4138 M [1] BOLT (M6X1X20-MM)  
35. 8T-4121 C [11] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
38. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
39. 8T-4171 M [4] BOLT (M6X1X12-MM)  
40. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
41. 304-4008 C [1] TAG-IDENTIFICATION (EMERGENCY STOP)  
42. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
43. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
44. 116-6161 B [1] CAP-CONNECTOR  
45. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
46. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
47. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 C [7] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-7852 M [2] BOLT (M4X0.7X10-MM)  
52. 9M-4972 [1] CLIP (LOOP)  
53. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
54. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
55. 3S-2093 C [13] STRAP-CABLE  
56. 8T-8737 [2] PLUG-SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35240223
 

132-2672: WIRING GP-FRONT

132-2672 WIRING GP-FRONT
S/N DDA1-3916
PART OF 176-5181 CHASSIS AR
i01506516 SEBP3524
1322672 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [26] STRAP-CABLE  
2. 7V-5628 [2] PLATE (TOP)  
3. 7V-6089 [4] CLAMP  
4. 122-6316 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
5. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
6. 213-9838 C [1] HARNESS AS-FRONT CHASSIS  
  102-8802 [6] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  5P-0765 E HOSE (51-CM)  
  8L-8413 [3] STRAP-CABLE (WHITE)  
  108-1304 E TUBE-HEAT SHRINK (33-MM DIA)(10-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)  
  123-7615 [2] CONNECTOR (1-PIN)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 2M-3433 [1] GROMMET  
8. 4P-7581 [5] CLIP (LADDER)  
9. 4P-8134 [2] CLIP (LADDER)  
10. 7G-3228 [1] GROMMET  
11. 7X-2534 M [4] BOLT (M6X1X50-MM)  
12. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
14. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP35240224
 

132-2686: WIRING GP-FRONT

132-2686 WIRING GP-FRONT
S/N DFZ1-563
PART OF 176-5201 CHASSIS AR
i01713359 SEBP3524
1322686 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [26] STRAP-CABLE  
2. 7V-5628 [2] PLATE (TOP)  
3. 7V-6089 [4] CLAMP  
4. 8T-8737 B [14] PLUG-SEAL  
5. 189-3158 [1] SUPPRESSOR-ARC  
6. 122-6316 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
7. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
8. 213-9708 [1] HARNESS AS-FRONT CHASSIS  
  123-7615 [2] CONNECTOR (1-PIN)  
  125-7874 D TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 D TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  180-9340 [30] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [9] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  180-9339 [7] PIN-CONNECTOR (14-GA TO 18-GA)  
  3S-2093 [2] STRAP-CABLE  
  5P-0765 D HOSE (54-CM)  
  8T-8737 [8] PLUG-SEAL  
  108-1304 D TUBE-HEAT SHRINK (33-MM DIA)(10-CM)  
  119-3662 D TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9. 2M-3432 [2] GROMMET  
10. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
11. 102-8805 B [2] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE AS INCLUDES RECEPTACLE AS & WEDGE)
12. 4P-7581 [5] CLIP (LADDER)  
13. 4P-8134 [5] CLIP (LADDER)  
14. 7X-2534 M [4] BOLT (M6X1X50-MM)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
17. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
18. 7X-7729 [1] WASHER (11X25X3-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP35240225
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N DDA1-2481; DFZ1-563
PART OF 176-5181, 176-5201 CHASSIS AR
i01774687 SEBP3524
1808804 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [34] STRAP-CABLE  
2. 204-1370 [1] GASKET  
3. 224-9612 [1] HARNESS AS-REAR CHASSIS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
4. 132-5789 [2] CLIP (LADDER)  
5. 194-7265 [1] SENDER AS-FUEL LEVEL  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 4P-7581 [3] CLIP (LADDER)  
7. 4P-8134 [3] CLIP (LADDER)  
8. 5C-9553 M [8] BOLT (M6X1X16-MM)  
9. 5P-6264 [4] GROMMET  
10. 8D-9671 [1] CLIP  
11. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
13. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
14. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
   
  8T-4224 F [1] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP35240226
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N DDA2482-3916; DFZ1-563
PART OF 176-5181, 176-5201 CHASSIS AR
i02495259 SEBP3524
1808804 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 279-7127 C [1] BRACKET  
2. 281-5619 C [1] ROD  
3. 7K-1181 B [34] STRAP-CABLE  
4. 195-1141 C [3] SPACER (7.2X18X11-MM THK)  
5. 204-1370 [1] GASKET  
6. 224-9612 [1] HARNESS AS-REAR CHASSIS  
7. 132-5789 C [2] CLIP (LADDER)  
8. 179-8235 C [1] LOCK PIN  
9. 313-4615 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 1B-0676 C [1] PIN  
11. 4P-7581 [3] CLIP (LADDER)  
12. 4P-8134 [3] CLIP (LADDER)  
13. 5C-9553 CM [5] BOLT (M6X1X16-MM)  
14. 5P-4116 C [1] WASHER-HARD (8.8X20.5X2-MM THK)  
15. 5P-6264 [4] GROMMET  
16. 8D-9671 [1] CLIP  
17. 8T-4121 C [5] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 CM [1] NUT (M10X1.5-THD)  
19. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
20. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 8T-4815 C [1] ROD END  
22. 8T-4908 CM [1] BOLT (M8X1.25X25-MM)  
23. 8T-4971 CM [3] BOLT (M6X1X30-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP35240227
 

215-2887: WIRING GP-RIDE CONTROL

215-2887 WIRING GP-RIDE CONTROL
S/N DDA1-3184
PART OF 203-8554 CONTROL AR-RIDE
AN ATTACHMENT
i01782094 SEBP3524
2152887 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(RIDE CONTROL)  
2. 7K-1181 [7] STRAP-CABLE  
3. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 158-5089 [1] RELAY AS (24-VOLT)(RIDE CONTROL/LOAD CHECK RELAY)  
5. 171-6029 [1] HARNESS AS-RIDE CONTROL (SOLENOID VALVE)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
6. 185-2767 [1] SWITCH AS-ROCKER (RIDE CONTROL)  
  111-7899 [1] GASKET  
7. 217-6729 [1] HARNESS AS-RIDE CONTROL (PRESSURE SWITCH)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
8. 4P-7581 [2] CLIP (LADDER)  
9. 4P-8134 [1] CLIP (LADDER)  
10. 8T-4138 M [1] BOLT (M6X1X20-MM)  
11. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
  M   METRIC PART
 

#SEBP35240228
 

215-2887: WIRING GP-RIDE CONTROL

215-2887 WIRING GP-RIDE CONTROL
S/N DDA3185-3916
PART OF 203-8554 CONTROL AR-RIDE
AN ATTACHMENT
i02737909 SEBP3524
2152887 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(RIDE CONTROL)  
2. 7K-1181 C [10] STRAP-CABLE  
3. 189-3158 [1] SUPPRESSOR-ARC  
4. 158-5089 [1] RELAY AS (24-VOLT)(RIDE CONTROL/LOAD CHECK RELAY)  
5. 171-6029 [1] HARNESS AS-RIDE CONTROL (SOLENOID VALVE)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1056 [4] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
6. 185-2767 [1] SWITCH AS-ROCKER (RIDE CONTROL)  
  111-7899 [1] GASKET  
7. 217-6729 [1] HARNESS AS-RIDE CONTROL (PRESSURE SWITCH)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
8. 4P-7581 [3] CLIP (LADDER)  
9. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
10. 8T-4138 M [1] BOLT (M6X1X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP35240229
 

215-2888: WIRING GP-RIDE CONTROL

215-2888 WIRING GP-RIDE CONTROL
S/N DFZ1-563
PART OF 203-8556 CONTROL AR-RIDE
AN ATTACHMENT
i01782042 SEBP3524
2152888 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 924G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 158-5089 [1] RELAY AS (24-VOLT)(RIDE CONTROL)  
3. 174-1802 [1] HARNESS AS-RIDE CONTROL (GROUND CIRCUIT)  
4. 185-2767 [1] SWITCH AS-ROCKER (RIDE CONTROL)  
  111-7899 [1] GASKET  
5. 4P-7581 [1] CLIP (LADDER)  
6. 7K-1181 [4] STRAP-CABLE  
7. 8T-4138 M [1] BOLT (M6X1X20-MM)  
8. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Sensors and Electrical Connectors
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1894 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 924G :

WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
219-2462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
189-4870 WIRING GP-COMMUNICATION
WIRING GP-CAMERA
256-7270 WIRING GP-CAMERA
WIRING GP-CAMERA
256-7269 WIRING GP-CAMERA
WIRING GP-CAB
233-6563 WIRING GP-CAB
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-ENGINE
180-8801 WIRING GP-ENGINE
WIRING GP-FRONT
132-2672 WIRING GP-FRONT
WIRING GP-FRONT
132-2686 WIRING GP-FRONT
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-RIDE CONTROL
215-2887 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
215-2887 WIRING GP-RIDE CONTROL

Truck sale:

Caterpillar 924G
 
Caterpillar 924G
- Wheel Loaders
BLANCHARD MACHINERY CO.
Caterpillar 924G, Wheel Loaders, Construction
34,000 
Caterpillar 924G, Wheel Loaders, Construction
- Wheel Loaders
FOLEY, INC.
Caterpillar 924G
 
Caterpillar 924G
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
 
79,000 
Caterpillar 924G, Wheel Loaders, Construction


 
60,000 
Caterpillar 924G, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.