AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

301-8308 BUCKET AS-HEAVY DUTY ROCK 631-MM (24-IN) WIDE X 0.23-CU M ( 0.3-CU YD) CAPACITY PART OF 241-0253 BUCKET & ADJUSTER GP AN ATTACHMENT 308C


WORK TOOLS
BUCKET GP
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
AIR CONDITIONER GP

MINI HYD EXCAVATOR 308C MINI HYD EXCAVATOR KCX
 308C CR Excavator KCX00001-UP (MACHINE) POWERED BY 4M40 Engine SEBP3539 308C KCX   (2001)

WORK TOOLS

BUCKET GP
BUCKET AS-EXCAVATION
301-8307 BUCKET AS-EXCAVATION
BUCKET AS-HEAVY DUTY ROCK
177-8110 BUCKET AS-HEAVY DUTY ROCK
BUCKET AS-HEAVY DUTY ROCK
301-8308 BUCKET AS-HEAVY DUTY ROCK
BUCKET AS-HEAVY DUTY ROCK
301-8309 BUCKET AS-HEAVY DUTY ROCK
 

#SEBP35390510
 

301-8308: BUCKET AS-HEAVY DUTY ROCK

301-8308 BUCKET AS-HEAVY DUTY ROCK
631-MM (24-IN) WIDE X 0.23-CU M ( 0.3-CU YD) CAPACITY
PART OF 241-0253 BUCKET & ADJUSTER GP
AN ATTACHMENT
i02995391 SEBP3539
3018308 BUCKET AS-HEAVY DUTY ROCK Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 241-0283 [1] EDGE AS  
1A. 119-3253 [4] ADAPTER-TIP (J-250, 2-STRAP)  
2. 153-1542 [1] PLATE AS-BOX  
3. 241-0272 [1] PLATE-WEAR  
4. 241-0273 [1] PLATE-WEAR  
5. 241-0274 [1] PLATE-WEAR  
6. 241-0275 [1] PLATE-WEAR  
7. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
 

#SEBP35390511
 

301-8309: BUCKET AS-HEAVY DUTY ROCK

301-8309 BUCKET AS-HEAVY DUTY ROCK
784-MM (30-IN) WIDE X 0.31-CU M (0.4-CU YD) CAPACITY
PART OF 241-0252 BUCKET & ADJUSTER GP
AN ATTACHMENT
i02996109 SEBP3539
3018309 BUCKET AS-HEAVY DUTY ROCK Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 241-0282 [1] EDGE AS  
1A. 119-3253 [5] ADAPTER-TIP (J-250, 2-STRAP)  
2. 153-1566 [1] PLATE AS-BOX  
3. 241-0267 [1] PLATE-WEAR  
4. 241-0268 [1] PLATE-WEAR  
5. 241-0269 [1] PLATE-WEAR  
6. 241-0270 [1] PLATE-WEAR  
7. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
 

#SEBP35390512
 

289-5246: EDGE GP-CUTTING

289-5246 EDGE GP-CUTTING
AN ATTACHMENT
i02713399 SEBP3539
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4F-7827 [8] BOLT-PLOW (3/4-10X2.25-IN)  
  278-8556 [1] EDGE-CUTTING  
  2J-3506 [8] NUT-FULL (3/4-10-THD)  
 

#SEBP35390513
 

8E-3750: TIP GP-LONG

8E-3750 TIP GP-LONG -J-250
AN ATTACHMENT
i01461626 SEBP3539
8E3750 TIP GP-LONG Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6258 [1] PIN  
2. 8E-6259 [1] RETAINER AS  
3. 9N-4252 [1] TIP-LONG  
 

#SEBP35390514
 

100-6462: TIP GP-PENETRATION

100-6462 TIP GP-PENETRATION -J-250
AN ATTACHMENT
i01461654 SEBP3539
1006462 TIP GP-PENETRATION Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6258 [1] PIN  
2. 8E-6259 [1] RETAINER AS  
3. 9J-4259 [1] TIP-PENETRATION  
 

#SEBP35390515
 

100-6463: TIP GP-PENETRATION

100-6463 TIP GP-PENETRATION -J-250
AN ATTACHMENT
i01461655 SEBP3539
1006463 TIP GP-PENETRATION Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6258 [1] PIN  
2. 8E-6259 [1] RETAINER AS  
3. 9W-8258 [1] TIP-PENETRATION  
 

#SEBP35390516
 

100-6464: TIP GP-PENETRATION

100-6464 TIP GP-PENETRATION -J-250
AN ATTACHMENT
i01461656 SEBP3539
1006464 TIP GP-PENETRATION Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6258 [1] PIN  
2. 9W-8259 [1] TIP-PENETRATION  
3. 8E-6259 [1] RETAINER AS  
 

#SEBP35390517
 

189-2741: AIR CONDITIONER & MOUNTING GP

189-2741 AIR CONDITIONER & MOUNTING GP
S/N KCX1-250
PART OF 214-1268 AIR CONDITIONER GP
i01662936 SEBP3539
1892741 AIR CONDITIONER & MOUNTING GP Parts scheme 1892741 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 189-2822 [1] HOSE-DRAIN  
2. 201-4413 [1] HOSE-DRAIN  
3. 189-2820 [1] HARNESS AS  
4. 189-2818 [1] PANEL AS-CONTROL  
5. 7Y-5226 M [4] NUT (M5X0.8-THD)  
6. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
7. 167-7083 [1] SENSOR AS (SUNLIGHT FOR AIR CONDITIONER)  
8. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
9. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
10. 176-1917 [1] SENSOR GP-TEMPERATURE (AMBIENT AIR)  
11. 189-2819 Y [1] AIR CONDITIONER GP  
12. 7X-2548 M [6] BOLT (M12X1.75X16-MM)  
13. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 3S-2093 [2] STRAP-CABLE  
15. 189-2821 Y [1] CONTROL GP-HEAT & AIR COND (AIR DISTRIBUTION)  
16. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
17. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
18. 6V-7357 M [1] BOLT (M6X1X25-MM)  
19. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
20. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
21. 189-2841 [1] PIPE AS  
22. 189-2842 [1] PIPE AS  
23. 125-1834 [1] SUPPORT AS  
24. 125-1833 [2] CLIP  
25. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
26. 214-1260 [2] PLATE AS  
27. 8Y-6967 [2] LOUVER AS-VENT  
28. 095-0728 M [4] SCREW-MACHINE (M4X0.7X12-MM)  
29. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35390518
 

237-0097: AIR CONDITIONER & MOUNTING GP

237-0097 AIR CONDITIONER & MOUNTING GP -FRESH AIR INTAKE
S/N KCX251-UP
PART OF 236-7308 AIR CONDITIONER GP
i01985192 SEBP3539
2370097 AIR CONDITIONER & MOUNTING GP Parts scheme 2370097 AIR CONDITIONER & MOUNTING GP Parts scheme 2370097 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-1833 [2] CLIP  
2. 125-1834 [1] SUPPORT AS  
3. 167-7083 [1] SENSOR AS (SUNLIGHT FOR AIR CONDITIONER)  
4. 176-1917 [1] SENSOR GP-TEMPERATURE (AMBIENT AIR)  
5. 225-5793 [1] HARNESS AS-HEATER & AIR COND  
6. 237-0099 Y [1] AIR CONDITIONER GP  
7. 225-5791 Y [1] DISTRIBUTOR GP-AIR (AIR CONDITIONER, HEATER)  
8. 225-5792 [1] PANEL AS  
9. 225-5796 [1] TUBE AS  
  113-3468 [1] SEAL-O-RING  
  121-7063 [1] SEAL-O-RING  
  293-1139 [1] SWITCH AS-PRESSURE (REFRIGERANT)  
10. 225-5798 [1] HOSE-DRAIN  
11. 225-5799 [1] HOSE-DRAIN  
12. 225-5800 [2] CLAMP  
13. 3S-2093 [4] STRAP-CABLE  
14. 7X-2548 M [6] BOLT (M12X1.75X16-MM)  
15. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
16. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
17. 6V-7357 M [1] BOLT (M6X1X25-MM)  
18. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
19. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
20. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
22. 8Y-6967 [2] LOUVER AS-VENT  
23. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
24. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35390519
 

189-2819: AIR CONDITIONER GP

189-2819 AIR CONDITIONER GP
S/N KCX1-250
PART OF 189-2741 AIR CONDITIONER & MOUNTING GP
i01662432 SEBP3539
1892819 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 308C MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-0126 [1] SENSOR (WATER TEMPERATURE)  
2. 207-0127 [1] CLIP  
3. 6V-9674 M [1] SCREW-MACHINE (M5X0.8X14-MM)  
4. 207-0104 [30] SCREW-TAPPING  
5. 207-0102 [26] SCREW-TAPPING  
6. 207-0106 Y [1] EVAPORATOR GP-REFRIGERANT  
7. 207-0120 [2] CLIP  
8. 207-0124 [1] SENSOR (AIR TEMPERATURE)  
9. 207-0112 [1] MOTOR AS  
10. 207-0117 [1] CONTROL AS  
11. 207-0114 [1] HARNESS AS  
12. 207-0113 [1] HARNESS AS  
13. 7X-2533 M [3] BOLT (M6X1X35-MM)  
14. 095-0827 [3] LOCKWASHER  
15. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
16. 207-0105 [1] FILTER  
17. 5C-2890 M [4] NUT (M6X1-THD)  
18. 225-5746 [1] RESISTOR  
19. 207-0110 [1] CLIP  
20. 207-0111 [1] CLIP  
21. 207-0129 [1] SCREW-TAPPING  
22. 207-0115 [1] RELAY AS (BLOWER MOTOR)  
23. 207-0130 [3] SCREW-TAPPING  
24. 207-0123 [1] LEVER  
25. 207-0119 [1] CORE AS-HEATER  
26. 207-0121 [1] MOTOR AS  
27. 150-2168 [3] SCREW-TAPPING  
28. 150-2167 [1] CLIP  
29. 207-0122 [1] LEVER  
30. 207-0128 [1] CLIP  
31. 207-0100 [3] CLIP  
32. 207-0125 [1] COVER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Boom, Stick and Bucket Operation
308C CR Excavator
Boom/Stick/Bucket Combinations
308C CR Excavator
Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
308C CR Excavator
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Bucket Adjuster
308C Excavator Machine System Specifications
Bucket
308C Excavator Machine System Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket - Remove
308C Excavator Machine Systems
Bucket - Install
308C Excavator Machine Systems
Service Magazine
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Caterpillar Parts SIS Catalog 308C :

BUCKET AS-HEAVY DUTY ROCK
177-8110 BUCKET AS-HEAVY DUTY ROCK
BUCKET AS-EXCAVATION
301-8307 BUCKET AS-EXCAVATION
BUCKET AS-EXCAVATION
301-8306 BUCKET AS-EXCAVATION
BUCKET AS-EXCAVATION
301-8304 BUCKET AS-EXCAVATION
BUCKET AS-EXCAVATION
301-8303 BUCKET AS-EXCAVATION
BUCKET AS-EXCAVATION
177-8116 BUCKET AS-EXCAVATION
BUCKET AS-EXCAVATION
177-8114 BUCKET AS-EXCAVATION
BUCKET AS-EXCAVATION
177-8112 BUCKET AS-EXCAVATION
BUCKET AS-HEAVY DUTY ROCK
301-8309 BUCKET AS-HEAVY DUTY ROCK
289-5246 EDGE GP-CUTTING
TIP GP-LONG
8E-3750 TIP GP-LONG
TIP GP-PENETRATION
100-6462 TIP GP-PENETRATION
TIP GP-PENETRATION
100-6463 TIP GP-PENETRATION
TIP GP-PENETRATION
100-6464 TIP GP-PENETRATION
AIR CONDITIONER & MOUNTING GP
189-2741 AIR CONDITIONER & MOUNTING GP
AIR CONDITIONER & MOUNTING GP
237-0097 AIR CONDITIONER & MOUNTING GP

Truck sale:

Caterpillar 308C, Construction
39,000 
Caterpillar 308C, Construction
- Crawler Excavators
WESTERN STATES EQUIPMENT
CATERPILLAR 308C 2004
 
CATERPILLAR 308C 2004
- TRACK EXCAVATORS
WESTERN STATES
500 E. Overland Road - Meridian - Idah
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.